High Disc Activity Warning WBENGINE.exe?
Dec 9, 2012like title say, i got a warning that wbengine have high disc activity... what is this and how do i fix it ?? it's located @ system32.
View 5 Replieslike title say, i got a warning that wbengine have high disc activity... what is this and how do i fix it ?? it's located @ system32.
View 5 Repliesbeen watching that when the system wake up form hibernation, the LED that shows me the activity (I guess read/write..) of the hard disk is blinking, and keep doing that for several minutes (2- 6 minutes).The weird part is that the system is not going slow, when i open the task manager to see what is running, in processor usage the value is minimal, between 0 and 5%.In the process tab, the only thing using some CPU is one of the svchost.exe, it had an intermittent CPU usage of 0-3%, when i finished it, the LED stop blinking.
View 3 Replies View RelatedMy Windows is doing something when I do not use it. The disk makes a lot of noise (r/w) but as soon as I touch the mouse or keyboard it stops.What can be the reason ?
View 3 Replies View RelatedI have recently upgraded my hard drive and cloned my old Win 7 partition to that. All seems to be o.k. but occasionally my hard disk starts to work intensively for less than a minute freezing everything.The hard drive that I have used for the migration of my OS was one that had a few large files on it. I have used easeus partition manager to shrink the partition with these files and made a new partition in front of it for the OS.I have checked the had drive for errors and bad tracks, and it looks that there are no such problems.A look at the event viewer shows the application experience and error reporting services starting and stopping all the time. Could it be the write caching of windows?
View 2 Replies View RelatedI have been facing this weird issue since this evening. Whenever I boot win7 it gets stuck on the welcome screen and one thing I noticed the HDD activity i too high and it remains like that.I leaved it for around 1 hour and still it is stuck on welcome screen and HDD activity is still damn high
View 2 Replies View RelatedOn my Windows 7 Ultimate 64Bit machine the harddisc shows a lot of activity after the screensaver starts.As soon as I end the screensaver this stops.Of course it is not possible to check that in task manager (unless I missed some recording functionality of the task manager).This only happens after approx 8pm.I was looking for some planned maintenance stuff or some antivirus things but I cannot find any.Is there some tool, that records the processes that access the harddisc? Are there any built in tools for such a task from Windows 7?
View 1 Replies View RelatedI just installed windows 7 ultimate sp1 - Like the title says I'm seeing 35% cpu usage with nothing going on. I googled around and ran traces to see which driver it was, turned out the ahci driver was doing it. The USB driver showed similarly high latency but that can be delt with later. Most forums recommend upgrading your drivers but this problem has stayed constant both with microsoft's stock drivers for everything and after running windows built in search for drivers even after I manually grabbed the latest drivers for everything. url...BIOS is up to date4 GB RAM - Corsair something or otherEVGA Geforce 8800 GT450W psu1 DVD burner (sata)5 hard drives (sata) plugged into all but the first sata port because that caused nothing but headaches for me. Update - switching from AHCI to IDE in BIOS fixed the problem.
View 3 Replies View RelatedSince Jan-Feb of this year I have encountered the following issue while trying to play games on my laptop.
Abnormally High CPU Usage
Extremely low FPS - After 5-20 Mins of play.
Extremely High latency to servers - from 300 - 900 after 5 - 20 mins of play.
The thing is all of these started 1 year after I been using this laptop, after a full year of everything running flawlessly all these issues kicked in after I performed a clean install in Jan., I even performed one in Feb. and one 3 weeks ago
Here are my specs:
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
System Manufacturer Dell Inc.
System Model Studio 1558
Processor Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, 2400 Mhz, 2 Core(s), 4 Logical Processor(s)
Installed Physical Memory (RAM) 4.00 GB
Name ATI Mobility Radeon HD 5400 Series
Adapter Description ATI Mobility Radeon HD 5400 Series
Adapter RAM 1.00 GB (1,073,741,824 bytes)
Got an Acer laptop - haven't had any problems with it at all, until recently have been getting BSODs during a range of activities. I've run Memtest and that hasn't flagged up any problems.
View 2 Replies View RelatedI am having trouble lately with my disk drives. First of all the specs and then the problems :
[code]...
Second behavior, I think since last week, my activity led is pulsing every second and my main drive never seems to go to sleep while my three others do. This is bugging me deeply as I have no idea what exactly is goign on the system.There is NO viruses, NO malware. Windows has been reinstalled from scrath on fresh formatted partion. I've tried to boot the system in diagnotstic mode with the same issue. I do not know what is the problem but I find it very unpleasant.An other test I did, disconnect the RAID entirely and the pulsing continue.Do anyone of you have any idea of what's going on? Are both problem related somehow? Could it be a windows patch causing all of this as it started not so long ago while is was running perfectly before?
Came at work, the computer was working (it has been working 24/24 second week already) everything was fine, the internet was working no issues, but decided to restart because my Antivirus (NIS 2011) crashed and there was no icon on taskbar, after restart my network was dead, but there was network port activity (as you can see in the screen), what I tried:1. Disabled/Enabled the network2. Restarted in safe mode with networking3. Removed for about 20 seconds the power cable4. Removed/Added the Network from Device manager (with "remove driver" option)5. Downgraded to another driver from May 20116. Tried another cable7. Tried another port in the switch8. Changed from Automatic to Manual in Network Settings (added IP)9. Used the Diagnose utility (it said something wrong with the Driver) after this I downgraded to another driver and nothing changed10. Logged with another username11. All services related to network are started.All the above didn't solved my problem, what's wrong ? I really can't understand - I'm a SysAdmin myself but I never had a issue like this that I couldn't solve!
View 9 Replies View RelatedSo, 7 is reporting 4.5tb of network activity in 11 hours, with 600 gigs sent. I'm connected to my mac file server with roughly 1.8 TB of external hard drives (not NTFS either. mac formatted). It just keeps pumping out 5 megabytes a second and i have no idea where it's going. It doesn't show up in my resource manager, either, Any ideas?
View 4 Replies View RelatedI've been bothered by the lack of a visual indication of network activity on Windows 7, so I found and installed this:
Network Activity Indicator for Windows 7 - IT Samples
It is just the twin monitors like in XP, but even when I'm not doing anything on the internet, both monitors keep a steady beat in harmony of ~2 beats/s. Is this normal for a cable connection?
i performed a clean install of windows 7 rc but
my hard drive is busy when i don't use my computer and I
see that the light indicating that the hd is busy is blinking for couple of hours.
also my cpu usage is higher than xp and it makes my laptop's cpu very hot.
windows 7 makes my laptop very noisy.
I recently have a problem with my system. when I try to write a dvd it randomly freezes. sometimes it writes completely without error, and then the next time at the start of the sequence it locks up. the hdd activity led lihgts up, and the mouse is still responsive, but nothing seems to react anything. after some minutes the BSOD appears stating that a system crucial process had been unexpectedly quit or has been closed, and so on.. the same happens now if I try to update the dvd's firmware. it's an LG GH22NS40 writer with a grren power 550w psu and windows 7. previously i have nero 10 installed, but it's been deleted for now.
View 2 Replies View RelatedI remember seeing in a thread a long time ago on here that there was a way to get network activity lights in the system tray using a 3rd party application.
Does anyone know of one that works in Windows 7 and doesn't have much of an overhead? I have found some that add a new icon to the system tray, but it would be better if it could replace the existing network connection icon if possible.
Whenever I start my windows hard drive led is constantly on and my laptop is slow as hell. If I continue using it sometimes I get blue screen but always I have to restart at last. Second time I boot it's ok. I disabled all unnecessary services. I had got the same problem with Vista. Now I upgraded to this. 7 was working fine but now the same problem is back. I use acer aspire 6920 with 4g ram and 250gb western digital. 2.00 Ghz core due.
View 15 Replies View RelatedMy PC takes approximately 90 seconds to boot! The HDD constantly reads/writes when windows has booted.My system:Win7x64, i7 920, gtx 560, 6 gig ram, Western digital 650 gig HDD, Asus p6 deluxe MB.
View 2 Replies View RelatedHaving an issue with intermittent BSOD with no common activity. Decided to turn blue during idle, surfing the web and playing games. I am not over clocking but i do have the RAM set to what OCZ recommended, DRAM frequency to 1333Mhz, CPU/NB voltage to 1.2v, DRAM Voltage 1.65v, DRAM timings to 9-9-9-20. Currents set up is as follows.
View 11 Replies View RelatedI'm having this weird problem with a PC trashing disk to the point where the PC becomes completely unresponsive, yet, perfmon does not seem to indicate any load. CPU is 1-3%, memory used <1.5GB. Disk-IO is indicated to <100 KB/sec, yet, and this is the weird bit, the blue line "highest active time" hammers on at 100% non-stop, and the HD activity light is on constant.
This is the hardware:
GIGABYTE Z68MA-D2H-B3 MB
i5-2400 CPU
2 x 4GB 1333MHz RAM
2 x 320GB WD SATA3 (3GB) disks connected to the MB 3GB SATA connectors.
It started with an upgrade from an AMD64 with an Asrock MB which had worked fine for years. First I just replaced the MB, CPU and RAM and after the usual complaints by MS, Windows 7 eventually settled and everything worked fine for a couple of days until suddenly the trashing that I described above started. I thought this was perhaps due to some leftover drivers from the AMD time, so I reformatted and reinstalled Windows 7. The trashing eventually goes away, for example if I leave it alone overnight, it might have calmed down in the morning, or if I turn off the PC and turn it on again, it may take anything from a couple of minutes to a couple of hours, but eventually it starts again.I already checked for malware. I've used Avast for years, but decided to switch to MSE to see if it made any difference (it didn't). I also ran Malwarebytes, also didn't find any problems. Windows 7 has been updated with all the latest updates and patches and SP1 as well as with the supplied Gigabyte Drivers.
I installed Windows 7 RC. When ever I am booted into Windows 7 one of my hard drives (probably not system drive - sounds like my secondary storage drive) is constantly working. Not very much but still making sounds.
I have completely turned off indexation, there is no automatic defrag going on. I have set a constant size to the paging file and there is no antivirus activity going on. The hard drive is making noise even when the system is idle for a long time and also when I am using it.
The processes tab in the task monitor shows no process that is using CPU.
What can this hard drive activity be?
I wanted to make a new partition on my hp laptop on the only disc it as.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly.As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd
View 4 Replies View RelatedI have a toshiba satellite L750 running Windows 7 home premium, when trying to burn anything onto a blank disc I get as far as selecting my items and asking it to burn but it keeps telling me to insert a blank disc (which obviously I have). I have tried several different types of blank disc but it dosnt seem to recognise any of them.
View 2 Replies View RelatedI currently connect my LG Flatron W2361V Monitor & my HD 5830 GPU with a HDMI cable, however some times when I turn my monitor off & come back to turn it on it takes a long time to pic up a signal & when it does system feels slow. However after checking the Catalyst Control Centre is showed my GPU Activity was 99% & it stops like that until I reboot.
View 4 Replies View RelatedJust got a new Acer aspire laptop for christmas. Everything works fine except that every time I turn it on or wake it up, there's about a 10 minute period of non-stop disk activity that causes every other application to come to a grinding hault.I downloaded process monitor and checked it out, and found the two most-accessed files are two TMP files called MSI7895.tmp and MSI8BDA.tmp, both in the Windows installer directory. No idea what either of these files are for.I'm thinking this has something to do with the tons of bloatware that came on this laptop. It's a 2.3 GHz, quad-core CPU with 4GB of RAM. I'd just really like to stop this so it doesn't take 3 minutes to open an Explorer window
View 3 Replies View RelatedFor personal security reasons (two words: online poker,) I have embarked on a mission to make sure that there is 100% (or close to it..) certainty that no one can check or find out what applications were used and accessed on my computerother places / files might be checked in Windows 7 to check user / software activity, so I can deal with it accordingly! Encrypted operating system (True Crypt)Paging file removed and not beingsavedHibernation file removed and hibernation disabledDeleting MUI cacheDeleting prefetch filesUsing a .bat file that completely deletes ALL Windows 7 event logsTurning off memory dump fileDisabled and deleted windows restore pointsUsing CCleaner at the end of every sessionUsing Temporary File Cleaner after every sessionWiping free space (Gutman 35 passes) on my hard drive every few daysStuff like firewall/antivirus/anti-spyware/anti-malware/sandboxie I don't even mention because these are obvious.Now I need to make this clear: privacy is the most important thing for me in this case, so I am willing to sacrifice a lot of performance for it.
View 6 Replies View RelatedAs of recently my computer turns off my wireless connection every time I am idle for more than 5 minutes it seems. After being idle for 5 minutes or so my wireless icon turns to: [URL]
When I unplug it, it still shows internet activity... I have no internal wireless cards in my system: [URL]
When I plug it back in it still shows the same wireless network connections screen. However I cannot plug into any network: [URL]
I tried rebooting my modem and router but that doesn't work either. Only thing that works is that I need to restart my computer.
I installed Windows 7 on my computer that was originally XP. Ever since then, I have 2 problems. First, my curser does whatever it wants, it jumps all over occasionally and highlights stuff so quickly while I am typing that when I press another key it is all lost. The second issue is that my mouse pad can no longer scroll.
View 2 Replies View RelatedMy XFX HD6950 1GB is running at 95%-99% when not performing any tasks. Here are some solutions i tried which did not work:
- I restarted my pc but that did not solve the problem.
- I tried to reinstall my driver but that also did not fix the problem.
The driver I am running for my GPU is the latest catalyst control centre. The problem started a few hours ago but my pc did not crash (yet).
When I play 1080p video and there is lot of disk activity at the same time (virus database updates, someone copy something trough local network, DVD is burning...anyway - lot of hard disk activity) then the video shows very poor performance - stops and starts for sec, then stops, slideshows and so on (also with sound). When this happens the CPU is about 50-60% so CPU is not an issue. I also set the media player priority to high in task manager - still bad performance when hard drive activity is high.
I have AMD CPU 3GHz, 3,5MB RAM, 1GB ATI Radeion HD4850
I DID NOT HAVE ANY SUCH ISSUE ON XP...whats the problem?
I've had the computer for about a year, a custom build...it's been working fine, then all of a sudden the problem started & now I'm suffering serious lag & slow down even with the most simple tasks (like clicking on the start icon) the HDD light is on continually & I can hear the drive clicking away. It never stops. (Starts when the windows loading screen comes on)Boot time is also incredibly slow around 10 minutes to boot up.I've just done a clean install of Windows 7 pro x 64 and the problem still persists...no other software installed other than my graphics & sound card drivers.The workstation isn't connected to the net I use a laptop for all that/this.On Task Manager my CPU is 0% & my Memory 6% which is fine..The drive is a Seagate Barracuda 500gb 7,200 SATA II.The programs causing this are mostly with-in "System" & SVChost" processes on the HDD.
For example:
Windows service profile
RtBackup
NTFS free space map
NTFS master file table
Winevt logs
I have read many threads about these type of problems but with never any clarification.I've got a ton of work to do...and I cant even open control panel under 1 minute right now.