Installed SP3 today.The install seemed to go fine.Restarted the computer,now I am stuck in a boot loop computer starts, goes to the We apologies page.None of the load options work, computer simply shuts down and goes back to the same page. Since this computer was a Vista-ready computer,but I ordered it with Win XP Pro,I don't have the OEM Win XP Pro CD.Therefore, can't do a chkdsk.
View 14 RepliesI don't really know where i should start so.well earlier today i installed a second hd in my computer to pull so files off of it for my sister and my mom, but when i got it working it said accsess was denied to there stuff i went on my moms computer to check if i hade already backed up there stuff of the old comp, so i go into her document to see if i could find the old documents and when i start scrolling through them the window freezes...so i leave it for a minute and while i'm waiting i close some other programs one of which was mozilla which was also frozen.I go back to the my document window and its still frozen.
I try to close it and of course its not responding so i click end now and it made the every thing disappear like the task bar and all the icons on the desktop are missing...so i wait and see if any thing will reappear and nothing does so i restart it and it starts booting up..the windows logo comes up and the little bars only gets half way across then it restarts and brings me to that menu where you can choose save mode or start normally and all that and no matter what i pick the comp just restarts and bring me back to the menu.
I'm working on an IBM ThinkCenter Desktop PC.On bootup, it goes through the IBM logo and then the Windows logo flashes quickly and then is gone and then the Safe Mode screen appears. No matter which option I choose from the Safe Mode screen, the result is the same: The Windows logo flashes quickly and then the system reboots, and then the IBM logo and then the Safe Mode Screen.I have tried running the repair module from an o/s disk I have here, but when I get to the c: prompt and type "dir" it says "error occurred during directory enumeration".There is only one partition.I have a copy of UBCD4WIN, if that would be helpful in diagnosing the problem.I do not have the o/s disk that belongs to this computer.
View 2 Replies View RelatedWindows xp will not boot to the safe mode or normal mode or the the last known good configuration, just goes in a loop and right back to the menu page
View 9 Replies View RelatedWindows XP Home but before it boots to the start up screen it freezes and crashes everytime. I went through many troubleshooting steps and am stuck in a rut. here's what I've done. Tried booting in safe mode, that failed as well. Seems like the OS is really messed up. Tried using a restore cd that includes Windows XP Home. But the boot order for the cd rom is last and so it keeps trying to boot windows first instead of starting up the restore disc. To fix that I went to the Bios. Tried changing the boot order but that was not available to me because they weren't an administrator.
There was an adminstrator password set protecting the boot order but they don't know what the password is because they bought it from ebay a long time ago and lost that person's contact information. So there is no way of finding out the admin password from the previous owner. So now we're in a jam, can't get to Dos, can't get to windows, can't boot from the cd rom to do anything.
I think my PC is infected with a virus. It is stuck in a continuous startup loop.I get an error message stating:SAS Window: winlogon.exe - Application Error I'm given an option to enter to terminate the program or cancel to debug. Either option restarts the system again. It won't work in safe mode or any thing else.
View 8 Replies View RelatedI recently reformated xp computer with xp 2002 disk all went well until i got to the activation of windows I activated windows and clicked ok then as i got to the logg on screen the error popped up again i repeated what i did the first time and sure enough it worked but when i clicked finish it returned to the logg in i tried once again to logg on and it came the same error but this time it told me windows is already activated and the only way to access windows is via safe mode which dont allow u to activate windows.
View 3 Replies View RelatedJust installed SP2 on a fresh Windows, and it's stuck on an endless loop of rebooting - never going past the Windows logo loading screen.
View 1 Replies View RelatedI was installing MS updates and my system went down and began looping in startup. I have tried F8, safe mode s/u, safe mode w/networking etc, No luck.It keeps looping.
View 3 Replies View RelatedOS crashed and am trying to reinstall Windows XP Pro. Problem is I've reached the blue Windows screens and getting error message that 'can't locate asms file'. Now I can't finish the install, and I can't boot from cd to try to reformat drive and reinstall. when I restart Windows XP splash screen comes up, the blue install windows comes up and the error message comes up.
View 10 Replies View RelatedA firends machine (XPSP2) is stuck in a loop of starting, going to a screen that says Windows did not start correctly, then offering the options of safe mode, safe mode w/ networking, last known good, etc. No matter which option I choose, the machine shuts down and restarts and goes through the same loop. What should I check? I am able to get into BIOS.
View 2 Replies View RelatedMy desktop is stuck on an infinite startup loop, I can see the standards Windows starting screen then there is a quick BSOD flash and the computer restarts and does the same thing - lucky I have a spare old laptop which will allow me to jump onto this site. Safe mode options do not work I tried the Windows recovery console - typing 'R' booting from the CD but then I get stuck at the console black screen not knowing what DOS commands I should be pushing. I tried goign the other way and choosing to install XP but then I get a message saying C: isn;t configured and will need to format to continue.
View 4 Replies View RelatedI have an eMachines Mod. T2642. OS WindowsXP Home sp2. When I plug in the power cord, the fans start up and the HD LED starts to flash and there is a clicking sound coming from the cpu. This is as for as it goes...no p.o.s.t. no nothing. The power switch will not turn the system off.
View 7 Replies View RelatedI've had my laptop for a year now and its been running perfectly fine up until now. When i start my computer up, it shows the screen that has the HP logo and then stays their. I have to turn my computer on and off a few times for it too actually get past that screen and boot windows.
View 3 Replies View Relatedi have windows XP, normally the the computer would start with the black screen (windows XP then follow by showing the users on a blue screen, but now it is not showing any users.what can i do?i have already taken all the cables out and put them back in. Starting in safe mode also did not help.it gets stuck on the blue screen it just says Windows XP
View 5 Replies View RelatedPicked up a computer from my parents the other night that has stopped working. When it is turned on it goes throught the normal process of recognising the BIOS, running some checks on processor, memory clock, primary master etc., but once these checks are done it jumps to the screen that says: We apologize for the inconveneince. Windows did not start successfully etc., and then asks me to select from
Safe Mode
Safe Mode with Networking
Safe Mode with command prompt
Last known configuration
Start Windows normally
Has been working fine for 3 days but it took a while to shutdown 2 days ago so I shut down with power switch.It now refuses to boot up. Goes through all usual till the 'start windows normally', run in safe mode' etc. The cursor will not move via any key on keyboard (although can use keyboard to access bios features) so I have no option other than to wait till 30 second timer countdown and it tries to start windows norally. After the 30 second countdown, the Windows splash screen appears half illuminated and it goes back to boot up again. Have tried to boot from CD (Windows disc) via Bios setting but the process continues as usual not allowing boot from disc.Have swapped Sata cables for new ones on DVD and HDD, tried to run windows setup with a brand new HDD but get BSOD after 2 minutes saying virus or HDD problem?Have tried swapping memory modules, removed graphics card and wifi card, nothing works!
View 8 Replies View RelatedIt's a good thing I have another computer to use...otherwise, I don't know how I would be able to ask these questions.My other machine is an HP a730n, 1 Gb RAM, 3 GHz, running with AVG anti-virus, all Windows updates in place.The machine was on overnight. Two programs were running (photoeditor, word processor).This machine also has two external drives connected to it, through USB ports.When I turned on my monitor, there was an error message displayed, but I didn't write it down. I clicked okay, and then the machine proceeded to shut down, and now it is going through an endless loop of trying to start windows.It initially gives me a screen with the options of safe mode, safe mode with networking, or command prompt, letting it start with the last known working configuration, or start windows normally. I've tried the start windows normally several times, to no avail.In safe mode, I clicked on Administrator, which then said it was starting windows up, but I then got a window that said "winlogon.exe application error. The instruction at "0x7498aaba" referenced memory at "0x00000008." The memory could not be read. Click cancel to debug, and OK to close.I also tried the last known good configuration, with the endless loop continuing.
View 21 Replies View RelatedI have been in the recovery console, I have tried making a winpe boot disk "Failed due to errors" tried fixing the MBR, even tried to connect to it remote with regedit to make some changes in the registry with out success. I have even installed another copy of win xp on another drive and booted the system up with the 250gig in it and changed the drive letter in there. After taking the one drive out and booting with the 250gig it still has a letter of "C:" and still the same login loop.
View 9 Replies View RelatedI recently Installed windows sp sp3 on my dell laptop and after i restarted the computer i found that i am stuck in a boot loop! i cannot boot to anything not safe mode or last known good config. Everytime it boots to normal windows, it gets to the boot screen scrolls across once and then stops and shows a blue screen for about a second, not enough time for me to see, and then it reboots and repeats the process. I have been able to see the bsod because of disabling the auto restart and it showed this stop : c0000221 unknown hard error systemrootsystem32 tdll.dll. When i boot into safe mode it gets to the agp440.sys or whatever it is then restarts.Now im pretty sure this is a common problem with sp3 installs, but isnt that normally on amd machines where you have to disable intelppm. Im running a dell with a pentium 4 m processor so it cant be that.
View 2 Replies View RelatedI changed the BOOT.INI section of msconfig to boot windows in Safemode. Upon getting in Safemode, the computer finally recognized USB devices and the CD drive again (wasn't doing so in normal mode). So, I insert a Windows XP disc, used the Advanced install mode (the one that overwrites the previous installation of Windows), and everything seemed to be going great.
However, the machine restarts and tells me this "Windows XP Setup cannot run under Safemode. Setup will restart now." and has an OK button. I click it, thinking it's going to boot into normal mode. Well, it doesn't. It boots up again, says the same thing.I click OK.Restart.Again.OK.On and on into infinity.
I was attempting to boot into safe mode through the BOOT.INI /SAFEBOOT function in MSCONFIG. After restarting to boot into safe mode, my computer would restart ten seconds into the login screen. This happens every single time and I cannot get back into Windows to uncheck the /SAFEBOOT box. The computer that I am typing on right now allows the user to choose the boot method before entering Windows. It has an old ASUS board and is running Windows XP Pro w/ SP2.
My primary computer (the one that is restarting) has an ASUS A8N-E and is running Windows XP Home w/ SP2, latest updates. Is there anything I can press (one of the F keys, perhaps?) that will prompt me to choose the booting method? Safe mode has restarted on me before, but not like this. I tried setting the motherboard to defualts in my BIOS, but that was just a stab in the dark, as I don't see what that has to do with this problem. I am thinking about setting my motherboard to defualts by opening up the case, etc. but I don't think that will do anything.
I was incredibly bored and I downloaded an old DOS VGA version of The Oregon Trail from the-underdogs. I used VDMsound to run it, and everything seemed to work alright until i got sick of the game and tried to quit. It locked up, i used ctrl-alt-del a few times, got impatient and stupidly switched off the computer just as i was being dumped back to windows. When i turned the computer back on, i was given the "safe mode" prompt, so i chose to start in safe mode. It then showed that list of system files(?) it was loading until it gets to "d347bus.sys" and asks if i want to press escape to skip loading it. Regardless of whether i press esc or not, it moves on to "SPTD.sys" and asks the same question. After i press escape (or not), i get a black screen, then the computer restarts again back to the safe mode prompt. If i try to "start windows normally" i get to the Windows XP loading screen, the progress bar moves a bit then the whole thing restarts again. Safe mode with command prompt, safe mode with networking, last known good configuration, none of these work, they all result in this maddening infinite loop.
View 2 Replies View RelatedI had left my computer on logged in on Windows 7 and when i got back the computer was in a continuous boot sequence (starts to boot, then after about 4 seconds shuts down and then over and over again). I reset the power from the back and turned it back on and it started up but with a different boot screen (Dynamic Energy Saver Quad6 Screen lol) and not the "black" one that normally comes up. It happened again last night and I think it happens when I leave my computer logged on in Windows 7. The weird thing was that after I reset the power from the socket (which stopped the loop) and turned it back on, it had me still logged on as a user and everything was like it was before I had left (basically like hibernate, except that hibernate is disabled on my computer
View 1 Replies View RelatedHad to replace motherboard in a PC and now I'm caught in a reboot loop. I keep getting the advanced boot option menuw where your asked wheather you want to Safe Boot, Safe Boot with Networking, etc. Which every choice I pick, the system reboots and takes back to the same place.what to use or if the Recovery Console will solve my problem.
View 3 Replies View RelatedI have a gateway desktop with windows xp home and it is constantly going into a reboot loop. Within 15 to 20 seconds of the computers start up it reboots itself and if left on it will continuously go into a loop. I get no blue screen flash neither, which I've heard a lot of people get with this problem. I have taken out the RAM cards and placed them in one by one seeing if RAM was the problem. It worked the first time, but after having one card in the second time it went straight back to a loop. So I crossed out RAM, I then took out my hard drive to see if it was causing the problem. I took it over to a friends house and it worked perfectly on a different PC. So that was out! I then thought maybe it was the PSU not sitting right, but it seems to be sitting fine. I cleaned my fans out as well thinking maybe it was just a simple problem. There are a so many different things that can cause this If I am correct? I just haven't the slightest of idea how to test my MOBO nor do I want to even go close to even touching it. I've also heard that WINXP service pack 2 suppously could cause this but I've just heard this. After trying everything in my personal arsenal I just did a clean reinstall of WinXP Home and everything seem to be working perfectly fine. The PC stayed on for about 2 and half hours after I installed the Wireless card then I turned it off for the night, thinking everything was fine. So I woke up to turn it on and to my surprise, it went into a reboot loop.
View 13 Replies View Relatedso I'm ready to upgrade this thing to pro from ME. when i get to the boot up screen it starts scanning files or something along those lines. n/e ways, eventually it says that the ohci1394.sys file is corrupt then it has to restart. i have no clue what to do, i've never had this menu pop up when trying to install and i've used this cd before. any ideas on what to do?
View 14 Replies View RelatedMy brother's computer froze so the only way i knew to turn it off was to uplug the power.. I did that and ever since then i cannot get the computer to boot up all the way it just gets stuck on the xp loading screen.. Ive tried starting in safe mode, normal mode, and "last know configuration that worked" mode.. When i boot from my boot disk i get into the window's console, i try and choose the repair option, when it lets me do this it asks for a "administrator password", i dont remeber using one when i installed windows. I know the "quick" fix is to do a complete reformat and install, but my brother has alot of work files that he does not want to loose. This is my brother's computer, i always make a backup disk of my files for this reason.. but he didnt so im stuck betweena rock and a hard place.
View 1 Replies View Relatedmy system gets stuck at the Windows XP screen with the blue bar scrolling across. I am able to get into safe mode, but restoring didn't work.
View 14 Replies View RelatedI am running Windows XP Professional and it came up with that message Disk Boot Failure: INSERT SYSTEM DISK AND PRESS ENTER when i turned on the computer. In my bios it is set up to CD is first boot and HDD is second I dont have a floppy drive and only 1 hardrive...I do not have the original windows xp pro installation cd, but I do have a full unused version of windows xp home edition installation cd and I put that in and booted off of that it started loading up like its supposed to then I got to the screen that said to start installing windows xp press enter so i did that then it went to the agreement thing and said press f8 to aggree to these terms i did that and it braught up a new screen saying
View 11 Replies View RelatedI've been trying to fix this computer for the last 8 hours and I can't figure it out. I've narrowed it down to a system corruption, it's not hard, viruses or spyware, it's not anything but a corrupted windows installation.I will only image the drive at a last resort. I might just buy a second hard drive and install the OS and copy over the goods. Either way, I don't want to go though all that work. I know I can fix this.I had it working at one point, I did a Windows XP Setup into Repair mode, checked the disk and even went as far as created a second boot.ini - Just to eliminate a factor, that didn't work.What appeared to work was to "repair" the "corrupted windows installation" 3 or 4 times, and then do an "upgrade" and reactivate windows. I managed to get to a desktop, but then things just went downhill.
The icons where weird, and my "theme" was reset, and various other things. I created a new user in hope to start over, I was aimed at uninstalling things such as the vista transformation pack, etc.. Did a Windows Update, changed a few Driver letters so shortcuts worked, and then tried to "repair" the transofmation pack so i could uninstall it. I also did a Windows Update.Then I reboot, and my nightmare starts over again. Now I can't even get the damn upgrade/repair to work and it wont boot past mup.sys. If I just knew what file was corrupted or what was making the system hang I could rename/restore it and well you get the idea..Please HELP - I need this computer, it's got lots of client data and bleh bleh on it. I'm completely out of ideas and my mind is exhausted.