I think my PC is infected with a virus. It is stuck in a continuous startup loop.I get an error message stating:SAS Window: winlogon.exe - Application Error I'm given an option to enter to terminate the program or cancel to debug. Either option restarts the system again. It won't work in safe mode or any thing else.
View 8 Repliesmy computer got infected with a malware or two. I honestly forgot what they're called but one of them was called rogue. something. A few of my desktop icons got deleted and sometimes I wouldnt c the start button or the computer wouldnt detect the main harddrive and various other errors. It also gave me fake anti virus ads I installed many different programs to remove it but none were successful, except Malwarebytes' Anti-Malware.Now, my computer has been so unstable that I dont even feel like it's a new computer.
View 12 Replies View RelatedI was installing MS updates and my system went down and began looping in startup. I have tried F8, safe mode s/u, safe mode w/networking etc, No luck.It keeps looping.
View 3 Replies View RelatedA firends machine (XPSP2) is stuck in a loop of starting, going to a screen that says Windows did not start correctly, then offering the options of safe mode, safe mode w/ networking, last known good, etc. No matter which option I choose, the machine shuts down and restarts and goes through the same loop. What should I check? I am able to get into BIOS.
View 2 Replies View RelatedMy desktop is stuck on an infinite startup loop, I can see the standards Windows starting screen then there is a quick BSOD flash and the computer restarts and does the same thing - lucky I have a spare old laptop which will allow me to jump onto this site. Safe mode options do not work I tried the Windows recovery console - typing 'R' booting from the CD but then I get stuck at the console black screen not knowing what DOS commands I should be pushing. I tried goign the other way and choosing to install XP but then I get a message saying C: isn;t configured and will need to format to continue.
View 4 Replies View RelatedInstalled SP3 today.The install seemed to go fine.Restarted the computer,now I am stuck in a boot loop computer starts, goes to the We apologies page.None of the load options work, computer simply shuts down and goes back to the same page. Since this computer was a Vista-ready computer,but I ordered it with Win XP Pro,I don't have the OEM Win XP Pro CD.Therefore, can't do a chkdsk.
View 14 Replies View RelatedI recently reformated xp computer with xp 2002 disk all went well until i got to the activation of windows I activated windows and clicked ok then as i got to the logg on screen the error popped up again i repeated what i did the first time and sure enough it worked but when i clicked finish it returned to the logg in i tried once again to logg on and it came the same error but this time it told me windows is already activated and the only way to access windows is via safe mode which dont allow u to activate windows.
View 3 Replies View RelatedJust installed SP2 on a fresh Windows, and it's stuck on an endless loop of rebooting - never going past the Windows logo loading screen.
View 1 Replies View RelatedI don't really know where i should start so.well earlier today i installed a second hd in my computer to pull so files off of it for my sister and my mom, but when i got it working it said accsess was denied to there stuff i went on my moms computer to check if i hade already backed up there stuff of the old comp, so i go into her document to see if i could find the old documents and when i start scrolling through them the window freezes...so i leave it for a minute and while i'm waiting i close some other programs one of which was mozilla which was also frozen.I go back to the my document window and its still frozen.
I try to close it and of course its not responding so i click end now and it made the every thing disappear like the task bar and all the icons on the desktop are missing...so i wait and see if any thing will reappear and nothing does so i restart it and it starts booting up..the windows logo comes up and the little bars only gets half way across then it restarts and brings me to that menu where you can choose save mode or start normally and all that and no matter what i pick the comp just restarts and bring me back to the menu.
OS crashed and am trying to reinstall Windows XP Pro. Problem is I've reached the blue Windows screens and getting error message that 'can't locate asms file'. Now I can't finish the install, and I can't boot from cd to try to reformat drive and reinstall. when I restart Windows XP splash screen comes up, the blue install windows comes up and the error message comes up.
View 10 Replies View RelatedI'm working on an IBM ThinkCenter Desktop PC.On bootup, it goes through the IBM logo and then the Windows logo flashes quickly and then is gone and then the Safe Mode screen appears. No matter which option I choose from the Safe Mode screen, the result is the same: The Windows logo flashes quickly and then the system reboots, and then the IBM logo and then the Safe Mode Screen.I have tried running the repair module from an o/s disk I have here, but when I get to the c: prompt and type "dir" it says "error occurred during directory enumeration".There is only one partition.I have a copy of UBCD4WIN, if that would be helpful in diagnosing the problem.I do not have the o/s disk that belongs to this computer.
View 2 Replies View RelatedWindows xp will not boot to the safe mode or normal mode or the the last known good configuration, just goes in a loop and right back to the menu page
View 9 Replies View RelatedWindows XP Home but before it boots to the start up screen it freezes and crashes everytime. I went through many troubleshooting steps and am stuck in a rut. here's what I've done. Tried booting in safe mode, that failed as well. Seems like the OS is really messed up. Tried using a restore cd that includes Windows XP Home. But the boot order for the cd rom is last and so it keeps trying to boot windows first instead of starting up the restore disc. To fix that I went to the Bios. Tried changing the boot order but that was not available to me because they weren't an administrator.
There was an adminstrator password set protecting the boot order but they don't know what the password is because they bought it from ebay a long time ago and lost that person's contact information. So there is no way of finding out the admin password from the previous owner. So now we're in a jam, can't get to Dos, can't get to windows, can't boot from the cd rom to do anything.
Picked up a computer from my parents the other night that has stopped working. When it is turned on it goes throught the normal process of recognising the BIOS, running some checks on processor, memory clock, primary master etc., but once these checks are done it jumps to the screen that says: We apologize for the inconveneince. Windows did not start successfully etc., and then asks me to select from
Safe Mode
Safe Mode with Networking
Safe Mode with command prompt
Last known configuration
Start Windows normally
I had to store my PC for a couple of months due to some home renovation. Hooked it all back up yesterday, and it booted fine. Only thing out of the ordinary was a message "new hardware requires windows to restart". I figured it was my TV tuner, it's always been touchy after a complete power-down. I chose not to restart right then, and used the pc for an hour or so, then selected shut-down. It powered down, then re-booted on its own. No problem, the TV tuner causes this, I waited to get into Windows to turn the DVR function that I know causes this, but it refuses to boot! I get to the windows screen with the progress bar, and after about 15 seconds, the screen goes black and it reboots.
View 6 Replies View RelatedUpon turning on my PC, the I get as far as the Windows icon showing the system booting up, then an hour glass, then back to a black screen as the computer automatically reboots and begins the cycle again. I've done some research online and found others have worked on this problem with check disk commands and safe mode start ups. The problem is, even when started in safe mode, it reboots. I am not able to get to a command prompt at this point to try anything!
The machine is an HP pavillion 513n running windows XP. XP came installed when this desktop was purchased new 2 years ago. This particular computer is not even used to access the internet so I have a hard time believing its virus related. I've checked that the power supply is secure and the fan seems to be operating as usual. The only change I made to any software or systems today was to add several legitimate fonts to the control panel.
I have windows xp sp3 while running avast 4.8 a warning stating cwindowssystem32drivers was infected with win32 alueron. I shut down my computer to run a boot time scan and now my computer is starting indefinatly. While attempting to start in safe mode computer states press enter to continue loading sptd.sys. I press enter and it restarts.
View 7 Replies View RelatedOut of no where my computer has started running scandisk each startup (after proper shutdown). On top of that, scandisk gets stuck at 0%, and won't budge. I've tried starting up in safe mode and I can't even do that. Currently I have to wait for the scandisk screen, and press a key within the 10 seconds so scandisk doesn't get stuck. I would like to be able to run it completely and have it not bother me every start up.
View 14 Replies View RelatedA friends computer went down last week - on loading it'd say 'file missing explorer.exe' it restarted and just wouldn't do anything else. It wouldn't go into safe mode, XP wouldn't repair etc, so I reformated the PC and put XP back on a fresh. She said she'd done nothing to it which was a bit puzzling.Now today I've gone around there and the PC is looping, it'll go to the XP load screen and then go back to the menu options - safe mode etc. The PC won't load in safe mode, last known config, nuffink! Again, she said she'd done nothing to it, apparently the mouse was freezing, now it won't do anything, I put in the XP disc and tried to do a repair this is the message:Setup cannot set the required Windows XP configuration information. This indicates an internal setup error. Contact your system administrator.
View 2 Replies View RelatedI dont know what is going on. I originally was trying to get my webcam to work, it wouldn't so i was going through troubleshooting procedures according to its help menu, and it asked me to unplug all usb devices and replug the webcam only, well i wasn't thinking and I just unplugged the external hardrive and the webcam at the same time without "stopping" it. So then it gaev me a message saying it needed to reboot to complete its update or something i wasn't paying attention cause i thought it just needed to reboot for the webcam so i did, then when i rebooted it would show the COMPAQ screen with the three options at the bottom(ESC for boot menu, F1 for BIOS(Ithink) and F10 for recovery, well then it would go immediately to a black screen w/ a white cursor in top left corner, It would idle there permenantly. I would have to ctrl+alt+del to get it to go back and finally i was looking for a way to use my recovery tools cd, that didn't work at first but then it finally came up and said it could do a recovery where it wouldn't delete my files but it would restore the rest to orignal state, so i went ahead and chose that option. It finished and said to reboot. I did, then it still gets stuck at that black screen, doesn't even show the WINXP screen.so i was looking for a way to figure this out and i went to the ESC menu this is what you see there.
View 1 Replies View RelatedI have a problem with Windows XP. I didn't shut down the PC properly. After that when I switch it on, the windows progresses until the screen with blue button running right-left left-right for couple of seconds and then: black screen and nothing.I tried safe startup - it worked OK. I performed recovery to yesterday savepoint, but the result remains the same as above.
View 14 Replies View RelatedAVG Free wouldn't delete them (Idk why) and I don't know how to fix the problem. It's making things take a long time to open. It took about 10 minutes for windows to start. Help would be greatly appreciated. Everything's working normally now but I don't know what the viruses are going to do.
View 14 Replies View RelatedI have windows me I have cable hook up my computer is so slow I don't even know where to start. I have norton anti viru when I turn my computer on it takes forever to start up.I always have to get repair for my Internet connection to work right. When I open outlook express and get my e-mail everything is ok then but when I close I get and error message from msn if this keeps happening restart your computer I don't ever want to restart takes forever to come up. I do have my connection with insight to come on when I start my computer should I stop that and connect after I turn on my computer. And also I keep getting norton stopping tnall4c something like that why does this keep coming on my computer.
View 14 Replies View RelatedI have a gateway desktop with windows xp home and it is constantly going into a reboot loop. Within 15 to 20 seconds of the computers start up it reboots itself and if left on it will continuously go into a loop. I get no blue screen flash neither, which I've heard a lot of people get with this problem. I have taken out the RAM cards and placed them in one by one seeing if RAM was the problem. It worked the first time, but after having one card in the second time it went straight back to a loop. So I crossed out RAM, I then took out my hard drive to see if it was causing the problem. I took it over to a friends house and it worked perfectly on a different PC. So that was out! I then thought maybe it was the PSU not sitting right, but it seems to be sitting fine. I cleaned my fans out as well thinking maybe it was just a simple problem. There are a so many different things that can cause this If I am correct? I just haven't the slightest of idea how to test my MOBO nor do I want to even go close to even touching it. I've also heard that WINXP service pack 2 suppously could cause this but I've just heard this. After trying everything in my personal arsenal I just did a clean reinstall of WinXP Home and everything seem to be working perfectly fine. The PC stayed on for about 2 and half hours after I installed the Wireless card then I turned it off for the night, thinking everything was fine. So I woke up to turn it on and to my surprise, it went into a reboot loop.
View 13 Replies View RelatedI am not sure if it is worded correctly, but I have a big problem. My pc is flooded with viruses. It is getting to the point where I need to take action right away.I have been searching online and have actually found some great ideas. But I have a greater problem. I can not download any .exe files. I believe its my temp folder that is messing up. I keep getting messages telling me various things can not work because emp is corrupt. When I try to download stuff from the net I get messages telling me that the file could not be saved because of an unknown error. I believe its a virus causing it, but I'm not sure. I would really love if someone could help me. I am a novice so I don't know what information I should post about my system to receive help.
View 8 Replies View Relatedon my computer, it keeps saying that a security breach is detected on my computer and my internet is now saying that i do not have permission to open this file! the only thing that will open is Internet after about 5 minutes..
View 7 Replies View RelatedQuote : TIANJIN, Feb. 12 (Xinhuanet) -- Experts warn computer users to guard against computer viruses as Valentine's Day draws near. A virus, known as "Vbs_Valentin.A" to break out next Tuesday, will spread chiefly through e-mails or on-line chat systems, according to China National Computer Virus Emergency Response Center on Sunday. Other viruses like "Worm-blebla.B" and "VBS-ILoveyou" will also assault computers if users open e-mails or attachments disguised with Valentine blessings.
View 3 Replies View RelatedMy computer has been going great since a few weeks ago. My computer is infested with spyware and viruses. I don't know how it got there but I get a pop up about once every click even when i'm not viewing webpages.
I have Ad-Aware, Spybot, and a program I purchased called XoftSpy. XoftSpy finds alot of the things on my computer but once they are deleted, they come back. Aurora is one of them.
Getting viruses / computer keeps on crashing all the time? checked the HJT log
View 3 Replies View RelatedI just had to reinstall windows xp on my computer because of viruses. Everything went ok. This morning I tried to change the display resolution apparently too high. Or maybe the driver wasn't updated or something. Anyway, the computer starts booting up but then brings up the message 'Attention Out the Range H:72.00kHz V:72.00 Hz'. I booted into safe mode and deleted the account where I tried to change the resolution but it still won't get past the bootup screen before giving the frozen up attention message.
View 6 Replies View RelatedIn theory, my computer should be running like its brand new.I have no viruses, spyware etc.I have a junk file cleaner as well as registry cleaner.The only things that are running in the system tray are neccessary.I cannot put in anymore RAM.
So how come my computer still does not act as if it were new?