Loops On Startup Tried Various Things Now Stuck
Jan 31, 2007
A friends computer went down last week - on loading it'd say 'file missing explorer.exe' it restarted and just wouldn't do anything else. It wouldn't go into safe mode, XP wouldn't repair etc, so I reformated the PC and put XP back on a fresh. She said she'd done nothing to it which was a bit puzzling.Now today I've gone around there and the PC is looping, it'll go to the XP load screen and then go back to the menu options - safe mode etc. The PC won't load in safe mode, last known config, nuffink! Again, she said she'd done nothing to it, apparently the mouse was freezing, now it won't do anything, I put in the XP disc and tried to do a repair this is the message:Setup cannot set the required Windows XP configuration information. This indicates an internal setup error. Contact your system administrator.
View 2 Replies
ADVERTISEMENT
Apr 1, 2006
I'm trying to resuscitate someone's Toshiba Tecra 8000 laptop and in a normal boot, I will get all the way to loading personal settings (just before desktop icon display) and then the below referenced error message appears for 1 second and automatically restarts the boot process. I can boot in safe mode.
Error message:
*** STOP: 0X0000001E (0XC0000005,0X804A3484,0X00000000,0X00000036)
KMODE_EXCEPTION_NOT_HANDLED
*** Address 804A3484 base at 80400000, DateStamp 3ad7ad60 - ntoskrnl.exe
Beginning dump of physical memory
Physical memory dump complete. Contact your system administrator or
technical support group.
This system is running Win 2000 sp2 w/ a paltry 196M ram.Would appreciate any suggestions to remedy.
View 8 Replies
View Related
Jan 8, 2005
The problem is it takes an incredibly long time to startup because of these, once we close them it gets back to running fast, but until then we have to wait for them to open. I think it's causing the problem because we didn't have this problem until we installed this.How do I make it stop starting up on Windows XP? I sped up my startup on my computer by stopping useless things from running.
View 4 Replies
View Related
Sep 16, 2007
Frequently on shut down I see a message that says hpqimzone.exe is not responding and I have to click on "End Now" to continue with shutown. I did some researching and found out that this process belongs to HP Photosmart Premier. This seemed confusing to me at first because the shutdown isssue occurs even when I don't run the program. After some more examinations I found out that I have two items that seem to run on startup, one is called Adobe Reader Speed Launch and the other is HP Photosmart Premier Fast Start. They are in a Startup folder - file path: C:Documents and SettingsAll UsersStart Menu Programs Startup. Are these critical components of startup and, if not, how do I stop them from running at startup? Would deleting the shortcuts do the trick?
View 4 Replies
View Related
Jan 6, 2008
Recently developed a problem with very slow shutdown and startup both. With no programs running, it takes about a minute and a half to shut down, about two to boot up, and about five to load programs after I select user. During the program load, the hard drive is running like crazy, with Task Manager showing a lot of use by explorer.exe, ctfmon, and one svchost entry. At times, one of the two latter ones will jump as high as 98% usage. I tried disabling every startup program with Task Manager while disconnected from the net, deleted restore points, defragged, and the delay improved only slightly. In addition to AVG a/v, Spybot, and Adaware I have run CCleaner and the full version of Registry Mechanic with no improvement. I have gone down the HijackThis list using the cheat sheet in this forum and deleted a couple of suspicious items, that didn't help either. On the attached startup list, I have no clue what the fourth item with no command listed might be. I have recently added an external hard drive for storage and backup and a new monitor, fwiw, but the problem seems to have started at some point after that. The web sites in the HJT log are all legitimate.
View 14 Replies
View Related
Mar 20, 2006
Out of no where my computer has started running scandisk each startup (after proper shutdown). On top of that, scandisk gets stuck at 0%, and won't budge. I've tried starting up in safe mode and I can't even do that. Currently I have to wait for the scandisk screen, and press a key within the 10 seconds so scandisk doesn't get stuck. I would like to be able to run it completely and have it not bother me every start up.
View 14 Replies
View Related
Dec 22, 2006
I was installing MS updates and my system went down and began looping in startup. I have tried F8, safe mode s/u, safe mode w/networking etc, No luck.It keeps looping.
View 3 Replies
View Related
May 21, 2006
I dont know what is going on. I originally was trying to get my webcam to work, it wouldn't so i was going through troubleshooting procedures according to its help menu, and it asked me to unplug all usb devices and replug the webcam only, well i wasn't thinking and I just unplugged the external hardrive and the webcam at the same time without "stopping" it. So then it gaev me a message saying it needed to reboot to complete its update or something i wasn't paying attention cause i thought it just needed to reboot for the webcam so i did, then when i rebooted it would show the COMPAQ screen with the three options at the bottom(ESC for boot menu, F1 for BIOS(Ithink) and F10 for recovery, well then it would go immediately to a black screen w/ a white cursor in top left corner, It would idle there permenantly. I would have to ctrl+alt+del to get it to go back and finally i was looking for a way to use my recovery tools cd, that didn't work at first but then it finally came up and said it could do a recovery where it wouldn't delete my files but it would restore the rest to orignal state, so i went ahead and chose that option. It finished and said to reboot. I did, then it still gets stuck at that black screen, doesn't even show the WINXP screen.so i was looking for a way to figure this out and i went to the ESC menu this is what you see there.
View 1 Replies
View Related
Feb 22, 2006
I have a problem with Windows XP. I didn't shut down the PC properly. After that when I switch it on, the windows progresses until the screen with blue button running right-left left-right for couple of seconds and then: black screen and nothing.I tried safe startup - it worked OK. I performed recovery to yesterday savepoint, but the result remains the same as above.
View 14 Replies
View Related
Jul 30, 2005
A firends machine (XPSP2) is stuck in a loop of starting, going to a screen that says Windows did not start correctly, then offering the options of safe mode, safe mode w/ networking, last known good, etc. No matter which option I choose, the machine shuts down and restarts and goes through the same loop. What should I check? I am able to get into BIOS.
View 2 Replies
View Related
Jan 14, 2005
I think my PC is infected with a virus. It is stuck in a continuous startup loop.I get an error message stating:SAS Window: winlogon.exe - Application Error I'm given an option to enter to terminate the program or cancel to debug. Either option restarts the system again. It won't work in safe mode or any thing else.
View 8 Replies
View Related
Mar 9, 2010
My desktop is stuck on an infinite startup loop, I can see the standards Windows starting screen then there is a quick BSOD flash and the computer restarts and does the same thing - lucky I have a spare old laptop which will allow me to jump onto this site. Safe mode options do not work I tried the Windows recovery console - typing 'R' booting from the CD but then I get stuck at the console black screen not knowing what DOS commands I should be pushing. I tried goign the other way and choosing to install XP but then I get a message saying C: isn;t configured and will need to format to continue.
View 4 Replies
View Related
May 11, 2005
I have a friend who has Windows 2000.Unfortunately, he has told me that his computer is in a consistent rebooting loop when he tries to start his machine. The only thing he had done before this stopped working was installing necessary updates as provided by Windows Update.
View 5 Replies
View Related
Sep 27, 2009
System Restore problem I've been having.I did a system restore on my laptop and then got error messages when attempting to restore back to the present time) but as of just now I have a new, much more pressing problem. I restarted my laptop in safe mode an hour or so ago to attempt to do a system restore while in safe mode, just to see if that might work since I always get an error when trying to do a system restore normally.
The system restore loaded up and the blue progress bar got about 1/6th of the way across and then stopped. I let it load and after 45 minutes of absolutely no progress in starting up with the system restore, I manually shut down the computer. I turned it on again after a minute and it began to boot up, showed the HP logo, went black, then the Windows XP loading screen, went black, then the HP logo again, black again, Windows XP loading screen again, etc and just looped again and again. I let it continue this for about 15 minutes but it just kept looping. I pressed the F8 key while it was doing this and selected it to start in Safe Mode, only to have the same looping sequence continue again and again. I had to manually shut down the laptop again, and after attempting to turn it on and have it boot up a few more times I've run into nothing but more of the same endless looping process.
What can I do about this? What caused it and is there any way to fix it? I'd really like a way to access or save my data, which I can't do now since the computer is doing nothing but looping the boot sequence. i have Prof SP2
View 3 Replies
View Related
Dec 6, 2008
In need of some major help, whenever i load up my computer everything loads up fine untill i get to the status bar screen which just loops and loops over and over again and nothing happens from that point onwards not only that but it knocks out all my devices i.e keyboard, mouse etc. I can open it in safe mode no problem and in this i have done numerous system restores. If i leave my computer off or idle for about 12 hours it worls again after that but about 2-4 days later the problem happens again this has happened aprox 7 times now. I really need someones help as this is my main computer and i have everything on it
View 7 Replies
View Related
Apr 5, 2007
I have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode. I will try to explain the process on what I did so it can help you experts figure out this dilemma
View 3 Replies
View Related
Mar 24, 2008
I did an AVG Rootkit scan which turned up "c:windows/system32/userinit.exe" as a dodgy file. I removed it and now the machine won't login when I boot the system. With a bit more digging it seems that this file was actually the login information within the registry and as it can't find a valid user/password it just keeps asking me click the user name and login. When I click it just loops back and throws back up the window, asking me to click the user name again.How I can access the registry and reset the userinit.exe file?I've tried selecting "last good configuration" which didn't work.I also tried to download Bart PE on another machine (running Vista) to set up a boot CD, but it wasn't particularly clear how to go about it, so I tried using the XP System Recovery app on the install disks. This got me into a C: prompt.
View 27 Replies
View Related
Mar 27, 2006
I have an Athlon XP 2400 and 80gb with 40gb hard-drive. My USB is very tempermental. Somethings work. Somethings don't. My gut re-action is that it is an external power issue as my printer was working. Strangely, my optical mouse is working fine. There is only one thing I can think of. Could it be a USB 2.0 problem as I have only 1. Please help. Where do I get drivers from? Do I even need drivers.
View 3 Replies
View Related
Aug 26, 2005
I went to Start/Run and all my things were gone such as regedit, msconfig etc. replaced by hundreds of past URLS I've been to. How can this be possible since I don't use Start/Run to go to websites? I can't delete them either. How do I get rid of them. Agent Ransack can't find them on my PC and my Temp and Temporary Internet folders are empty. How can I get rid of these old URLs?
View 6 Replies
View Related
Apr 1, 2005
I posted this in the hardware forum, but since I posted that thread other things have been happening that make me think it could be a virus.My mouse was working fine up until last night, when my computer started behaving strangely. I would move my mouse across my desk and it would work fine, before the cursor simply stopped moving. I was still moving my mouse, but the cursor wasn't moving at all. It does this in every direction, and it happens at random times. I thought it might just be a problem with the optical tracking, but something else is happening today too. Whenever the cursor stops moving the mouse sometimes jumps to another part of the screen, this also occurs randomly. Even if I'm moving the mouse right it could jump to the lower left hand corner of the screen. It also clicks itself randomly, both left and right clicks. This means it's not just a problem with the optical tracking. I'm a big FPS player, so this isn't exactly what I need, especially when my gun fires randomly and the mouse stops tracking in a firefight.
View 14 Replies
View Related
Apr 2, 2008
I run a windows XP home standard computer.A few days ago I started trying to tidy up my computer, cleaning the registry and getting rid of duplicate files -with software help of course-.I used Eusing Free Cleaner, and apparently while it's just fine for registry cleaning, it does a very bad job at trying to clean duplicate files, since it shredded -meaning they can't be recovered- some things that were essential to the system. What they were I don't know.But apparently the 'Stand By' function in shut down no longer works, and I can no longer adjust the monitor refresh rate, which is stuck at its lowest setting.Is there anything that can be done to try to find out what files are missing, and to download them again?
View 13 Replies
View Related
Sep 20, 2005
Windows XP- I get a message I have to many things in my start up menu and all can't be show. I need to take some out or choose a smaller icon. I don't know what to remove.
View 7 Replies
View Related
Aug 31, 2005
Running XP Home, SP2 w/1 gig. All of a sudden my machine is beginning to do strange things. First of all my second hard drive (D disappeared...it didn't show in My Computer. "Add New Hardware" didn't bring it back. Then, all of a sudden it was back. Secondly, something changed my screensaver, but I was able to restore it the usual way. I've used Registry First Aid to check on registry content, and, I've run a virus scan (NAV) and I've defragged the drive. Also, neither Counterspy nor Spybot could find anything wrong.
View 1 Replies
View Related
Mar 20, 2006
I can't run windows update, things won't install, or they won't run, update doesn't work, my windows problem cup runneth over. Here is my Hijack This! log. I will be eternally grateful if someone can help, and I don't have to wipe my HD!
Logfile of HijackThis v1.99.1
Scan saved at 6:12:17 AM, on 3/20/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Running processes:
C:WINDOWSSystem32smss.exe
C:WINDOWSsystem32winlogon.exe
C:WINDOWSsystem32services.exe
C:WINDOWSsystem32lsass.exe
C:WINDOWSsystem32Ati2evxx.exe...............
View 7 Replies
View Related
Dec 4, 2004
this was my most recent log.. and while i'm not 100% on which to delete and which to ignore, i know for sure that there's quite a few things that need to go.
also, could you please let me know which things i can put in the "ignore list".
View 7 Replies
View Related
Mar 17, 2005
We downloaded the sp2 when it sometime last year and it came with lots of problems.I finally had to go to microsoft and get them to help me uninstall it. I have not reinstalled sp2 because I am affraid to. Have they changed it and what happens if I install it and then have to "fix" things. I am not too advanced in my computer skills and I don't think I would be able to "fix" it.
View 8 Replies
View Related
Feb 4, 2008
It's a good computer, corrupted with things that it doesn't need, and I'm afraid to remove anything. Is there a program or someone who can clean things up for me and speed it back up again? I have an 80gb hard drive, 256 MB of Ram, and a great Graphics card. (NVIDIA GeForce If i'm not mistaken.), but I really need to clean this up, because before it was really fast, now on loading up, and just anything it's so slow nowadays.
View 3 Replies
View Related
Sep 20, 2010
If I AltTab away from a program, like a game, then go back, often it becomes very choppy... any idea what I can do to fix this?
View 5 Replies
View Related
Sep 7, 2005
I am a begginner and have a windows 2000 machine and i think i have spyware and virus's how do i do the hijacker checker.
View 4 Replies
View Related
Sep 11, 2005
When I open a folder, lets say my pictures, and switch the view tothumbnail view that is fine. But when I close the folder and go backin later the folder has reverted back to how it looked originally.When I open internet explorer it sometimes comes up as a fully openwindow and other times as a window that only covers half my screen. and no matter what i do it never seems to remember to expand the window.I have a four speaker setup but every so often the Audio controlsswitch it back to 2 speaker. As soon as I select 4 speaker everythingis okay.
View 1 Replies
View Related
Jan 16, 2005
I formatted the PC, reinstalled WIndows XP w/SP1. I've got Norton Personal Firewall and Norton ANtivirus installed, all up to date. I have Spybot S&D and Ad-Aware 6 installed, also all up to date. They catch nothing. Everything works peachy keen for a while, but then, I cannot open new instances of programs(such as IE or Firefox), taskmanager will not open on my screen(the the CPU meter appears in taskbar), and attempts to install programs while this is going on causes the isntall to hang, and things to get really messed. I even formatted agian, reiinstalled XP again, and it's STILL happening. I've downloaded all the security patches from Microsoft, except SP2 it hangs because of the problem stated above
View 2 Replies
View Related
