2000 Pro Loops At Startup?/memory Errors?
Apr 1, 2006
I'm trying to resuscitate someone's Toshiba Tecra 8000 laptop and in a normal boot, I will get all the way to loading personal settings (just before desktop icon display) and then the below referenced error message appears for 1 second and automatically restarts the boot process. I can boot in safe mode.
Error message:
*** STOP: 0X0000001E (0XC0000005,0X804A3484,0X00000000,0X00000036)
KMODE_EXCEPTION_NOT_HANDLED
*** Address 804A3484 base at 80400000, DateStamp 3ad7ad60 - ntoskrnl.exe
Beginning dump of physical memory
Physical memory dump complete. Contact your system administrator or
technical support group.
This system is running Win 2000 sp2 w/ a paltry 196M ram.Would appreciate any suggestions to remedy.
View 8 Replies
ADVERTISEMENT
Jan 31, 2007
A friends computer went down last week - on loading it'd say 'file missing explorer.exe' it restarted and just wouldn't do anything else. It wouldn't go into safe mode, XP wouldn't repair etc, so I reformated the PC and put XP back on a fresh. She said she'd done nothing to it which was a bit puzzling.Now today I've gone around there and the PC is looping, it'll go to the XP load screen and then go back to the menu options - safe mode etc. The PC won't load in safe mode, last known config, nuffink! Again, she said she'd done nothing to it, apparently the mouse was freezing, now it won't do anything, I put in the XP disc and tried to do a repair this is the message:Setup cannot set the required Windows XP configuration information. This indicates an internal setup error. Contact your system administrator.
View 2 Replies
View Related
Jan 5, 2005
The computer is slow to load windows 2000. Takes several mintues to connect to the net. Message showing that "Virtual Memory is low". Have gone into "My computer" - then "advanced options" and increased virtual memory to 1500. There is a good amount of space on the disc. But actions made no difference and still get the message that the virtual memory is low. Speed of computer not improved.Will try "System restore".
View 2 Replies
View Related
Oct 8, 2009
"There is insufficient memory or disk space. Close extra windows and save your work." It's the message that I keep getting when I try to paste some pages of a book from Internet onto WORDS 2000 on my Laptop DELL INSPIRON 9300 with OS Windows XPPLEASE HELP ME TO FIND A CURE FOR THIS
View 6 Replies
View Related
Apr 22, 2010
speed up my pc because it takes forever for my computer to startup. So first I went to add/remove programs and uninstalled things I didn't think I needed. Then I found some software online that is supposed to help clean your windows registry. So here's what I installed just this morning: RegCure and Pareto Logic Privacy Controls. I ran scans in both and ran the auto fixes for both. but now i am geting start up error
View 14 Replies
View Related
Dec 3, 2008
They ONLY pop when I reboot/restart windows and desktop loads. I just recently have been experiencing some RUNDLL errors the errors are as follows...
"Error loading C:WINDOWSsystem32fohofamu.dll The specified module could not be found."
"Error loading C:WINDOWSsystem32mosayibo.dll The specified module could not be found."
View 4 Replies
View Related
Jul 22, 2006
Here are errors I am getting at the startup of my computer: Error loading C:DOCUME~1ALIMAL~1TempRarSFX2HNETPO~1.dll The specified module could not be found and: Error loadind C:PROGRA~1COMMON~1systemmsdc32.dll
View 14 Replies
View Related
Jun 28, 2005
I am running Windows 2000 Pro, and recently I began using Asmw eraser pro. Shortly after I began to use Asmw, I began to get errors during startup. The two error messages I receive are: "MotiveSB.exe is generating errors and will be shut down.", and "ycommon.exe is generating errors and will be shut down. You will have to restart your computer." I have run a few virus programs without detecting any viruses. I don't know if these errors are caused by the history cleaner, or what, but they now occur every time I start up.
View 6 Replies
View Related
Jan 24, 2007
At the start up, I'm getting some error messages..1. mimboot.exe Entry point not found something to do with a CoreDll.dll 2.hpqthb08.exe - Failed to initialize properly- HP image zone?3. A couple of symantec errors (don't use norton anymore but can't delete it either)4. And after we get rid of the error messages, the HP update Agent runs the whole time but can't ever complete the update.I usually have to get out of that by alt+ctrl+del.When we try to shut down the computer, it just doesn't do it. I ran regcleaner and it fixed a bunch of stuff, but still wouldn't shut down or restart properly. Then I disabled NVidia driver helper, seemed to help a little, but now it gets stuck on the blue "logging off" screen and we still have to turn it off and restart manually.
View 11 Replies
View Related
Oct 10, 2009
The screen going black and the computer beeping consistently untill turned off. The screen showing evenly spaced vertical white lines on a black screen. Showing a bluescreen (I can't remember the error messege but will make a note if it happens again). Not booting up correctly, with a messege displayed about inserting system disk or removing disk from the floppy drive though nothing is inserted. Sometimes the computer will switch on fine and will not act up at all, but much more often now I will get at least one of these errors each time I try to use the computer, if not several in succession.
View 3 Replies
View Related
May 16, 2006
When I start up, either when windows xp is loading, login screen, or right after i enter the password and press enter, a blue screen comes up.BAD_POOL_HEADER with all the text saying like check for viruses, but other stuff sometimes comes up like system files (.sys extensions) in the place of BAD_POOL_HEADER, which is right under the first line in the blue screen.
View 14 Replies
View Related
Aug 21, 2007
My mom was on my computer this afternoon and there was a power surge. When the power came back on, the computer would not come back on. When I booted my computer up this evening, everything was fine until midway into the startup sequence and I closed Yahoo! Messenger. Right after I did that I got the BSOD (BAD_POOL_HEADER) and the Stop errors at 0x00000019, (0x00000020, 0xE2B9E8F0, 0xE2B9E918, 0x0C050801). After restart, I tried to load HJT and I got an Explorer.EXE Application Error: The instruction at 0x7c91142e referenced memory at 0x00650072. The memory could not be read.
View 1 Replies
View Related
May 3, 2006
In the first error if I click on OK for the GetLastError=2hDevice=fffffff I get the error in the second error about tttFailed to open GVCpl WinNT driver Please reboot your system. The other message just goes away (Could not start GPCIDrv driver). It seems to be tied to the Gigabyte driver. The other thing that I have noticed is that Wall Watcher doesn't log anything anymore.
View 7 Replies
View Related
Oct 26, 2008
My system randomly freezes and sometimes the screen will go blank When i try and start up the system i usually get stuck on the loading screen and have to restart, or the system will freeze as i'm logging in. I get a BSoD with DRIVER_IRQL_NOT_LESS_OR_EQUAL 0x000000D1 (0x000000000 0x0000000FF ) and some other 0x000stuff
View 6 Replies
View Related
Oct 2, 2007
A box came up with C:Windows askmgr.exe in the title bar and the text said, "Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access them" I clicked OK and a second box came up. It had DESKTOP in the title bar and the text said "Could not load or run c: . Make sure the file exists on your computer or remove the reference to it in the registry." I clicked OK and things seemed to work.
I use the free version of Grisoft's AVG so I ran a scan and it found 3 items, one of which was taskmgr.exe infected with Trojan horse SHeur.NOZ. It said it fixed them so I rebooted. The other 2 were svchost.exe and svchost_tmp.exe also infected by SHeur.QCZ
View 12 Replies
View Related
May 11, 2005
I have a friend who has Windows 2000.Unfortunately, he has told me that his computer is in a consistent rebooting loop when he tries to start his machine. The only thing he had done before this stopped working was installing necessary updates as provided by Windows Update.
View 5 Replies
View Related
Sep 27, 2009
System Restore problem I've been having.I did a system restore on my laptop and then got error messages when attempting to restore back to the present time) but as of just now I have a new, much more pressing problem. I restarted my laptop in safe mode an hour or so ago to attempt to do a system restore while in safe mode, just to see if that might work since I always get an error when trying to do a system restore normally.
The system restore loaded up and the blue progress bar got about 1/6th of the way across and then stopped. I let it load and after 45 minutes of absolutely no progress in starting up with the system restore, I manually shut down the computer. I turned it on again after a minute and it began to boot up, showed the HP logo, went black, then the Windows XP loading screen, went black, then the HP logo again, black again, Windows XP loading screen again, etc and just looped again and again. I let it continue this for about 15 minutes but it just kept looping. I pressed the F8 key while it was doing this and selected it to start in Safe Mode, only to have the same looping sequence continue again and again. I had to manually shut down the laptop again, and after attempting to turn it on and have it boot up a few more times I've run into nothing but more of the same endless looping process.
What can I do about this? What caused it and is there any way to fix it? I'd really like a way to access or save my data, which I can't do now since the computer is doing nothing but looping the boot sequence. i have Prof SP2
View 3 Replies
View Related
Dec 6, 2008
In need of some major help, whenever i load up my computer everything loads up fine untill i get to the status bar screen which just loops and loops over and over again and nothing happens from that point onwards not only that but it knocks out all my devices i.e keyboard, mouse etc. I can open it in safe mode no problem and in this i have done numerous system restores. If i leave my computer off or idle for about 12 hours it worls again after that but about 2-4 days later the problem happens again this has happened aprox 7 times now. I really need someones help as this is my main computer and i have everything on it
View 7 Replies
View Related
Dec 25, 2006
we were rebooting my PC to free up the virtual memory. The power cut off in the house, and afterwards, the computer started up very sluggishly. We tried a ChkDisk because my father told me that has fixed his PC before. It didn't help any because it said the disk was fine. I then tried a system restore, which did not help either. It still boots up as slow as ever.The operating system in Microsoft Windows XP 2002 edition with SP2 nstalled, and all the lastest updates installed.
View 10 Replies
View Related
Apr 5, 2007
I have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode. I will try to explain the process on what I did so it can help you experts figure out this dilemma
View 3 Replies
View Related
Aug 30, 2005
When I start up, I get 2 error messages: one that says windows cannot find "e" and another that says windows cannot find "2.dll"
View 3 Replies
View Related
Dec 4, 2004
When I start the computer, I get a screen freeze and have to press Ctrl,Alt,Del once before any programs will startup. A lot of probs with internet connection and slowness while surfing as well as a lot of pop up ads in my face.
There are system boxes coming up with registry and dll errors and the whole system seems SLOW.
View 3 Replies
View Related
Oct 22, 2007
The family computer is playing up and to the best of my knowledge the computer in question just simply suddenly stopped working as it should. I am unable to get the 'default' welcome screen upon start up and am getting the logon box where you type in a username and passworld. I know how to get rid of this, user accounts>enable welcome screen - but it will not solve the problem.This is just the start of the problems. I get a whole host of errors which popup one after another.
View 4 Replies
View Related
Mar 24, 2008
I did an AVG Rootkit scan which turned up "c:windows/system32/userinit.exe" as a dodgy file. I removed it and now the machine won't login when I boot the system. With a bit more digging it seems that this file was actually the login information within the registry and as it can't find a valid user/password it just keeps asking me click the user name and login. When I click it just loops back and throws back up the window, asking me to click the user name again.How I can access the registry and reset the userinit.exe file?I've tried selecting "last good configuration" which didn't work.I also tried to download Bart PE on another machine (running Vista) to set up a boot CD, but it wasn't particularly clear how to go about it, so I tried using the XP System Recovery app on the install disks. This got me into a C: prompt.
View 27 Replies
View Related
Jun 30, 2005
I am being shown "script error","page error, you may need to change browser
settings",and "behind firewall" when I try and send files and photos. I've
tried everything I know to fix this, but I still see these errors and still
cannot send photos while I'm online.
View 1 Replies
View Related
Jun 3, 2005
Im installing a brand new pc and I just downloaded all the latest fixes and patches for the OS and the Browser.except one, KB890923. Everytime I try to launch through Windows Update it says it cant do it. SO I attempted to download and run it manually and it states that the program is not a valid Win32 application.
View 1 Replies
View Related
Aug 17, 2007
Am I right in thinking that they are both pretty similar except that server has support for multiple processors and extra network related tools and facilities. The reason I ask is that if a piece of software works on Windows 2000 server, is it extremely likely that it will work on Windows 2000 professional too? As a bit of background information: I work for a small company which supplies temperature monitoring equipment which needs to be networked. I've been told that it has been tested on Windows 2000 server but not on Window 2000 professional.
View 1 Replies
View Related
Jan 15, 2009
I am trying to upgrade the RAM memory on my Gateway MX3230 notebook. It presently has 256 MB and I would like to upgrade to 1 GB. I have checked the Gateway website and and upgrade to 1 GB is acceptable. I purchased a memory module from Kingston which was listed as being compatible with my laptop. When I tried installing the module, the computer will not start, nothing but black screen. It's as thought there is no memory at all. I tried re-installing the module making sure it was inserted in as far as it will go, still no luck. There is no settings in bios that I can see that would prevent the acceptance of this module
View 3 Replies
View Related
Sep 18, 2005
The IEXPLORE.EXE still reside im my PC memory after I close the IE window.
With task mamanger, I can see there are many IEXPLORE.EXE running. But, I already close all of them.
I ran 3 ad-ware, spybot, MS antispyware. Removed all the spyware by those 3 spyware detector.
View 11 Replies
View Related
Feb 10, 2009
I am using Intel pentium 4 cpu 2.40GHz, 1.25 GB RAM. Iam using 80 GB samsung hard disk.
I installed Microsoft Windows XP Professional service pack 2 on a drive of 10 GB memory space with NTFS file system.
After the installation of Win XP, the drive properties shows 4.9 GB of used memory and only 4.45 GB of free memory, but when I try to find total memory occupied for all the files in that drive (using "select-all" and properties) the used memory is only 2.3 GB only.
Now I don't understand the huge difference of this memories calculations. Where that extra used memory gone, when the total memory occupied by all the files is much less.
View 2 Replies
View Related
Oct 19, 2007
why my Windowx XP sees only 1024 MB memory while I've increased the original memory of 512 MB by 2x 512 MB ?My motherboard has three DDR-slots. It had from the beginning a Kingston K 512MB PC2700 module in slot #1. This week I've added two Kingston K512 UDIMM 512MB PC2700 modules in the slots #2 and #3.All three modules has the type name KVR333X64C25/512, so I thought they would be compatible.
View 5 Replies
View Related
