Here are errors I am getting at the startup of my computer: Error loading C:DOCUME~1ALIMAL~1TempRarSFX2HNETPO~1.dll The specified module could not be found and: Error loadind C:PROGRA~1COMMON~1systemmsdc32.dll
View 14 RepliesMy system randomly freezes and sometimes the screen will go blank When i try and start up the system i usually get stuck on the loading screen and have to restart, or the system will freeze as i'm logging in. I get a BSoD with DRIVER_IRQL_NOT_LESS_OR_EQUAL 0x000000D1 (0x000000000 0x0000000FF ) and some other 0x000stuff
View 6 Replies View RelatedI had some problems recently and with the help of one of the TSG locals, I located and got rid of a malicious file.However, I had a problem at that time that I could not resolve, and am still trying to beat it down. Now I am beginning to get random errors I can only run Spybot S & D in safe mode. Progress bar for it will show it at about 39.../56120. Then the system reboots itself, sometimes twice...and sometimes there comes the message that my computer has recoverd from a serious problem I have a similar problem with running PandaScan, it just won't make it all the way through.I know I have tons of stuff running in the background and would like to cut out as many of those as I can, I've just not gotten that far yet.I'm posting my HJT log in hopes someone can help spot my culprit.
View 14 Replies View RelatedI've given up.. This problem has been occuring for quite awhile now and I'm really clueless as to what is causing it. I've conducted a destructive system recovery via the copy of windows on my HDD twice, and also from a windows CD. I've ran memtest for both my RAM and HD and both tests always come back OK... The errors occur randomly.. sometimes my computer can stay on for 4+ hours without one, sometimes they appear within 30mins of turning on my PC.I'm a computer newbie, but I wrote down some info from the last blue screen errors:
Quote: STOP: 0x000000D1
SYMTDI.sys - Address BADC3DB7
STOP: 0x0000008E
Win32k.sys - Address BF8011A3 The most common errors I remember included something about either one of the following:
DRIVER_IRQL _NOT_LESS_OR_EQUAL
PAGE_FAULT_IN_NONPAGED_AREA
I've attatched the minidump files I have since last re-booting my system. I hope I've provided enough info.
Recently i have been having lots of crc errors whilst unzipping files. My initial thought was that one of my hard drives was on its way out. I had checked them all using the manufacturers diagnotic ultility (Seatools) with all testing features and each one, on all drives, returned without error. I thought my suspicions were confirmed when i turned my drive on for the BIOS not to recognise one of my SATA's (a Barracuda 7200.11). After a bit of research i found out that this was prob not the cause of my crc errors as the SD15 version of the firmware supplied with my drive had a bug and causes the drive to go into a hibernated state, a separate issue i'm trying to deal with.After removing this particular hard drive along with Vista out of my system i installed win XP onto another drive temporarily. I am having the same problems with the CRC errors on my other drives which seem to be operating normally. The kind of files i'm talking about are fairly large usually demos or trailers etc in .rar format.
As i understand it CRC errors can also come from faulty RAM. I have recently RMA'd some faulty RAM back to OCZ and the stuff in my system currently is the brand new RAM i got sent back from my RMA. I know this can be causing the CRC errors and occasional random restarts regardless of how new it is so i have checked both sticks individually using memtest86. I only had time to let them do 1 pass each but both came through error free.If any of you out there have any suggestions for what else i can do to figure out what is wrong i would very much appreciate it. Could it be a lack of wattage on the psu causing the restarts? Processor? I'm stuck,
I have been getting random BSODs repeatedly and a variety of other errors.I am running Windows XP SP3 on a Dell Latitude D820.The BSODs happen randomly throughout the day. I scanned for virus with MBAM, spybot, symantic, microsoft malicous remover, used ccleaner, ran diagnostics and came up wiht nothing.Additionally, sometimes when the computer boots it will boot with inverted colors (or just generally messed up colors) and sometimes when trying to log into the user account it says:"Windows cannot load the user's profile but has logged you on with the default profile for the system.
View 1 Replies View Relatedmy pc keeps randomly restarting and applications quit every so often. e.g internet explorer fatal error needs closing > send report to microsoft/dont send need to write this quick before it does it again.here is my hjt log.
View 4 Replies View RelatedAbout once a day, my system starts displaying random errors. Applications do not work as they should, and my network card is seemingly disabled. The only solution is a reboot. During the shutdown process, the welcome screen is usually enabled, however, when these errors occur, small dialog boxes saying "Logging off" and "shutting down" are displayed. I am pretty sure it's not spyware, as this is a fresh install of XP only a week old.
View 7 Replies View RelatedAlright so heres the issue, I had aquired a Trojan-spy.win32@mx. And i went through the process of deleting it. Which was quite long and annoying. Now however my computer randomly decides it feels like rebooting. Ive ran Chkdsk /f, and even did a non destructive restore. And nothing has helped, so im stuck here in safemode till i can get some help. Best buy wants to charge me $129 dollars to fix it, but who has that kind of money for them to run a few things? SO please guys if you could help it would be great.
View 6 Replies View RelatedThis is very mysterious. The very first time each day I start up my XP machine, it boots fine. After that first boot, whenever I boot again, there's a 75% chance the boot will fail with the following message:"STOP: c0000221 Uknown Hard Error SYSTEMROOTSYSTEM32 tdll.dll"
Of course, that means that there's a 25% chance it'll boot fine! If after it fails I keep on trying and trying, eventually it'll boot perfectly again.How can this be? Either there's something wrong with "SYSTEMROOTSYSTEM32.
for the past week I have been recieving problems with my computer. the problems started coming up at September 14th 2006 and I went to alot of forums to reasearch and I have discovered these crashes. these are in Hex numbers but these were recorded from the event Viewr Program in XP. they are all in order.
View 14 Replies View RelatedWindows Installation : Various files cannot be copied and/or not copied correctly. Giving blue screen of [enter] retry, [esc] skip or F3 to abort installation. Files constantly failing to copy : cyycoins or something, lots of .chm files, too many to mention. Curious thing is, same problems for both optical drives and both HDDs, varying both for many installations. Eventually I held down [enter] and the files went in, well some didn't but Windows booted fine.
Warhammer Dawn of War : Winter Assault. wh40k.cab is corrupt. Changed optical drives during installtion, installed fine. Could be hardware issue with my cdrom, Same game, when playing will crash to desktop. No error message sometimes, no indication of crash (no freezing or warning sounds or stuttering, just flat out BOOM, .exe gone. Sometimes error message appears to send error report, sometimes doesn't. Occurs while under load
I thought this could again be CDROM issue, with the copy protection not keeping the game running because disc wasnt read right.
Mozilla Firefox : Dunno really. Loaded it up to access webpage. Some survey appeared, then program locks up for maybe 10 seconds then crashes with firefox.exe has encountered error Windows built in message appears. Firefox is unable to load up again due to missing/corrupted .dll file error. Cannot page_read or something. I forget the whole error message. Guess coulda been important to save it to post here.
Whole system reboot. Idle one time, machine just goes down, then starts up again. Flat reboot. Didnt touch any buttons, then once in Windows 'recovered from serious error' message appears. Tells me after sending report its a device driver issue. Changed My Computer options to give the Blue Screen of Death so that the driver is named, nothing, just page_file_read or errors along those lines I know nothing about.
Don't know what is wrong. Hardware issue could be Optical Drive. But then again I have 2 drives, and the errors ocur no matter which one I use, same with the Hard Disks. I'm stumped. Its quite a huge issue. I have nothing on the drives, I backed all my stuff up before formatting after starting to get errors 1-4. I got these errors before format and immediately after. So would indicate Hardware issue would it not Can it be a BIOS problem? Or wiring, neither of which i have altered or been brave enough to look at.
Ok this problem started about 2 weeks ago when my windows xp wouldnt load it go to the loading screen but the progress bar just continued to act as if loading but windows never came on . Eventually after several restarts windows loaded but this continues to happen randomly. Also my computer keeps freezing and I get random disk read errors I have run a check on the hard drive and ram and both these seem to be working ok I have also run several spy ware and antiviruses can anybody help
View 14 Replies View RelatedI will try to be as specific about my problem in general.I am using a Compaq laptop, using Windows XP. I don't know much more than that, but I can search for additional information regarding specs and stuff.It all started one day when I was browsing the internet using the latest version of Firefox. I turned up my volume and the blue screen of death appeared (advising me to seek tech support of sorts).I restarted, and yet again touching the volume yielded the blue screen of death. I tried several, possibly 6 times, and the only thing causing the blue screen of death is altering the volume in any way, including touching the volume buttons, adjusting volume in the volume control and adjusting the wave settings in volume control.
So I ran Spyware Doctor. I do pay the full 40 bucks a year for this wonderful program, and it detected a bunch of freaky looking things. Like adaware, something called virtumonde, and all these high threat viruses and adware, but it wiped them clean. I ran it again, it found 3 more standard viruses that it didn't name, cleaned them, ran SWD again and nothing appeared, so I assume now my computer is free from whatever was messing with me.The volume problem still persists though, and also at random times the blue screen of death will appear (I'm praying now it won't as I type all this or I'll cry).Then another problem occurred. When I try to open a file of sorts, that pesky message appears- windows explorer has an error of some sort, do you want to close it or ignore it?or something to that extent, so I can't view any sort of files now. I am running the computer in safe mode (which still exhibits the risk of a blue screen attack, but I can view the folders properly). Somethings up, what can I do to fix this? Any suggestions? I will try to answer any thing I might have left out.
my computer is weird to the max....here are some problems just to name a few: when running random programs, i get fatal execution errors, i get messages asking to debug random apllications or terminate them, i get messages to just terminate things, i get messages that start coming up whenever i try and open something and whatever i try and open it says it has to close....sometimes my whole screen turns blue with white typewriter font saying i have hit a problem and i need to shut down (blah blah if the problem persists contact blah blah if this is the first time uve seen this error just reboot blah blah) sometimes my computer locks up and i get stupid errors.....they tell me to send error reports, that does no good.....i get them 24/7 too....basically im getting error messaages with lots of zero's / name files in them and my only options really are to terminate things (things being applications im trying to run).....this varies from aol instant messenger, to games, to internet browser, to word, to paint....anything....ive run ad-aware, spybot, mcaffee, ive checked my hijackthis logfile and deleted unwanted things.....ive run chkdsk on bootup, ive run defrag, ive run system restore idno how far back, ive run clean disk, and other stuff.....i think most of these problems have started once i downloaded the service pack 2 package from
View 8 Replies View RelatedI work in a computer lab at a community health center. I just started working there and I realized no one in the building had any of the admin passwords to the computers. I brought in a Windows password reset disc and reset all of the admin passwords. This is when I got the bright idea to install the Adobe creative sweet at work off of my external HD. I only tried this on my computer, and the installation failed. Half of the CS was installed and half wasn't. This seemed to have caused some problems for me.When I attempted to startup the computer, my desktop would load, but some of the icons wouldn't fully load (they were stuck as the default exe icon). I could move my mouse, but when I put the cursor over the Start menu button, all I got was an hour glass. I couldn't click on any of icons at all.
I rebooted into safe mode and it worked perfectly. I tried to remove the CS in add/remove programs, but it failed. I think this is because it wasn't fully installed. I deleted all of the folders I could find (other then flash player and adobe reader), then downloaded the CS4 cleanup script, but this failed to clean up my system as well. When I went back into add/remove programs and tried to uninstall the CS, it said it had already been removed, and it disappeared off the list. Something tells me it isn't fully removed.I tried a selective startup where I turned off all of the startup programs. This seemed to have worked. So I started going back throught the list allowing some of the start up items. I thought that it was the CS4 startup programs that were causing my troubles (which for the most part they were), but now even with ALL startup values disabled, it still freezes.I can use the internet, but if I click on the start menu it takes a while to load. When it finally loads, whether I click off of it or on a program, it disappears and my computer freezes. I can still use my mouse.
My pc takes ages to boot up and when it does it has started to randomly freeze. I've ran various scans such as registry mechanic and spyware doctor and nothing has been found.
View 10 Replies View Relatedspeed up my pc because it takes forever for my computer to startup. So first I went to add/remove programs and uninstalled things I didn't think I needed. Then I found some software online that is supposed to help clean your windows registry. So here's what I installed just this morning: RegCure and Pareto Logic Privacy Controls. I ran scans in both and ran the auto fixes for both. but now i am geting start up error
View 14 Replies View RelatedAll the programs on me computer randomal, every now and again (3 times an hour) decide to close with the same lovely error popping up every time about an unexpected error with the 'Send' 'Don't Send' buttons.think I may have two explanations, The RAM, a corrupt system file or a corrupt hard drive.Does anybody have any idea about why this is happening and if so, a solution?
View 4 Replies View RelatedI am geting a extremely slow "windows is starting up" usually about 3-6 min then when everything loads up I end up experiencing a lot of locking up and crawling when doing simple tasks like moving files. I only have like 4 programs in the area next to my clock running. I have recently taken my puter to a friend/tech and he cleaned up my puter of the viruses it had and the spy/adware it had, ran some hardware tests and memory tests and claimed everything was fine not the case.my puter shouldnt be experiencing these prob.anyone have a clue? Also I forgot to mention that I checked my sys startup and the main thing that seems to be running the most is the system idle process usually at 99 nothing else seems to be taking anything and there are about 30-35 processes running.
View 14 Replies View RelatedThey ONLY pop when I reboot/restart windows and desktop loads. I just recently have been experiencing some RUNDLL errors the errors are as follows...
"Error loading C:WINDOWSsystem32fohofamu.dll The specified module could not be found."
"Error loading C:WINDOWSsystem32mosayibo.dll The specified module could not be found."
it wasnt problematic when i 1st set it up about a month ago. the startup was defo alot quicker.the system sometimes hangs during a game, it used to hang on startup but i fixed that with system restore in startup because of the slow startup (where it doesnt seem to be actually doing anything! no cpu of mem usage just ages to load startup programs) i used some startup removal programs to delete all unnecessary startup program, it hasnt speeded anything up it takes the same amount of time but just loads less programs.i have also run ccleaner, reg cleaners, tried running ad-aware but never completed a scan as it freezes. i have always had zonealarm pro runing and bitdefender
when powering up it seems to show the blackscreen very often, asking to turn on in safe mode? even when the pc had been shutdown properly. othertimes on powering on the pc hangs on the windows loading page or when enering the password.the pc can also restart randomly during general use or gaming.this is very fustarting and was hoping you guys could give me some of your advice? i was thinking maybe do a system restore to the day when the pc was first built? would this be a really dumb move? what would be the consequences?
I am running Windows 2000 Pro, and recently I began using Asmw eraser pro. Shortly after I began to use Asmw, I began to get errors during startup. The two error messages I receive are: "MotiveSB.exe is generating errors and will be shut down.", and "ycommon.exe is generating errors and will be shut down. You will have to restart your computer." I have run a few virus programs without detecting any viruses. I don't know if these errors are caused by the history cleaner, or what, but they now occur every time I start up.
View 6 Replies View RelatedAt the start up, I'm getting some error messages..1. mimboot.exe Entry point not found something to do with a CoreDll.dll 2.hpqthb08.exe - Failed to initialize properly- HP image zone?3. A couple of symantec errors (don't use norton anymore but can't delete it either)4. And after we get rid of the error messages, the HP update Agent runs the whole time but can't ever complete the update.I usually have to get out of that by alt+ctrl+del.When we try to shut down the computer, it just doesn't do it. I ran regcleaner and it fixed a bunch of stuff, but still wouldn't shut down or restart properly. Then I disabled NVidia driver helper, seemed to help a little, but now it gets stuck on the blue "logging off" screen and we still have to turn it off and restart manually.
View 11 Replies View RelatedI just cleaned out a slightly infection of spyware and viruses on this computer and everything looks nice a clean but unfortunately there seems to be some residual problems.My startup is much slower, the 'loading your personal settings' can take upwards of 2 minutes. But, it can by by-passed by hitting ctrl-alt-del. Once I get to the desktop I notice that Norton Anti-Virus is disabled and it stays disabled until the icons load which ALSO takes another 2-3 minutes. I can open programs and they run fine but I am unable select anything on the desktop or right click on it.
I've never had slowdown like this on here before. It also only seems to be happening on this one windows account, the other ones load up much faster. I've cleaned it the best I can running all the normal apps and some other cleaners. Even tried restoring the desktop back to the windows xp default appearance.
The screen going black and the computer beeping consistently untill turned off. The screen showing evenly spaced vertical white lines on a black screen. Showing a bluescreen (I can't remember the error messege but will make a note if it happens again). Not booting up correctly, with a messege displayed about inserting system disk or removing disk from the floppy drive though nothing is inserted. Sometimes the computer will switch on fine and will not act up at all, but much more often now I will get at least one of these errors each time I try to use the computer, if not several in succession.
View 3 Replies View RelatedWhen I start up, either when windows xp is loading, login screen, or right after i enter the password and press enter, a blue screen comes up.BAD_POOL_HEADER with all the text saying like check for viruses, but other stuff sometimes comes up like system files (.sys extensions) in the place of BAD_POOL_HEADER, which is right under the first line in the blue screen.
View 14 Replies View RelatedMy mom was on my computer this afternoon and there was a power surge. When the power came back on, the computer would not come back on. When I booted my computer up this evening, everything was fine until midway into the startup sequence and I closed Yahoo! Messenger. Right after I did that I got the BSOD (BAD_POOL_HEADER) and the Stop errors at 0x00000019, (0x00000020, 0xE2B9E8F0, 0xE2B9E918, 0x0C050801). After restart, I tried to load HJT and I got an Explorer.EXE Application Error: The instruction at 0x7c91142e referenced memory at 0x00650072. The memory could not be read.
View 1 Replies View RelatedI'm trying to resuscitate someone's Toshiba Tecra 8000 laptop and in a normal boot, I will get all the way to loading personal settings (just before desktop icon display) and then the below referenced error message appears for 1 second and automatically restarts the boot process. I can boot in safe mode.
Error message:
*** STOP: 0X0000001E (0XC0000005,0X804A3484,0X00000000,0X00000036)
KMODE_EXCEPTION_NOT_HANDLED
*** Address 804A3484 base at 80400000, DateStamp 3ad7ad60 - ntoskrnl.exe
Beginning dump of physical memory
Physical memory dump complete. Contact your system administrator or
technical support group.
This system is running Win 2000 sp2 w/ a paltry 196M ram.Would appreciate any suggestions to remedy.
In the first error if I click on OK for the GetLastError=2hDevice=fffffff I get the error in the second error about tttFailed to open GVCpl WinNT driver Please reboot your system. The other message just goes away (Could not start GPCIDrv driver). It seems to be tied to the Gigabyte driver. The other thing that I have noticed is that Wall Watcher doesn't log anything anymore.
View 7 Replies View RelatedA box came up with C:Windows askmgr.exe in the title bar and the text said, "Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access them" I clicked OK and a second box came up. It had DESKTOP in the title bar and the text said "Could not load or run c: . Make sure the file exists on your computer or remove the reference to it in the registry." I clicked OK and things seemed to work.
I use the free version of Grisoft's AVG so I ran a scan and it found 3 items, one of which was taskmgr.exe infected with Trojan horse SHeur.NOZ. It said it fixed them so I rebooted. The other 2 were svchost.exe and svchost_tmp.exe also infected by SHeur.QCZ