Cannot Upgrade Memory - Blanck Sceen Appears After Installing Memory
Jan 15, 2009
I am trying to upgrade the RAM memory on my Gateway MX3230 notebook. It presently has 256 MB and I would like to upgrade to 1 GB. I have checked the Gateway website and and upgrade to 1 GB is acceptable. I purchased a memory module from Kingston which was listed as being compatible with my laptop. When I tried installing the module, the computer will not start, nothing but black screen. It's as thought there is no memory at all. I tried re-installing the module making sure it was inserted in as far as it will go, still no luck. There is no settings in bios that I can see that would prevent the acceptance of this module
My computer is 2 years old and after adding many games for the grandkids my computer has started slowing down. I now have 512MB of memory would it speed up my computer to add memory? If so how much should I add and how do I do this? Is there a site that shows step by step instructions?
I have a custom pc with 512Mb of memory and want to add 1Gb to that.Ive already check at Kingston,Crucial and Gigabyte sites and know I need a DDR-333 memory. I have some questions though.
1.Will I need to add an extra fan to avoid higher temperature anywhere?
2.How can I know if my existing memory stick will work with the new one?
3.Do I need to change any configuration in my computer?
I have 512MB of RAM with a 1.9GB processor. I installed another 512MB into the computer... Now my computer wont work properly... I get a message saying that some file is corrupt and I need to repair it. I did what I needed to do but when I boot up and get to the logon screen, it is asking me for a password for my logon name.I never had a password for any of my logon names.By this, I cant get onto my computer. I even tried to go into Safe Mode, samething. It is asking me for a password at the Administrator logon name
I have a Dell computer with XP Home edition.It has Service Pack 2, Pentium 4 CPU 1.6 GHz 1.59GHz, 512 MB Ram. I wanted to purchase a new computer but will lose many of my programs that will be very expensive to replace, some that are no longer compatible with new 64 Bit machines. Can I upgrade The memory and speed of my computer?
I installed 256 DDR in my nephews computer and when I click on the system info..it still says he only has 116 of RAM left (He started out with 128 before I installed the memory upgrade). I assumed it would automatically install.
I recently purchased additional memory, 2 sticks of 256mb PC133, for my HP computer. I currently have 2x128mb and this has worked since I bought my computer about 3 years ago. My problem is that when I install both the new sticks, 512 total, the system refuses to boot into Windows and gives a FATAL SYSTEM ERROR. I don't get this error with the 128mb memory, or even when mixing for a total of 384. The memory is from Crucial.com and I have run diagnostics on all sticks with no problems. I have all the lastest Windows, BIOS, and hardware updates available, and still it crashes
i want to increase the memory on my computer, at present it is 512. Is it just a case of buying new memory and un pluging the old and pluging in the new if so what happens to all the stuff on the old memory.
Intel celeron 10g hard drive(very small almost full) compaq evo compact desktop. My wife uses this for game play etc.It had 1 512m & 1 256 card in it & worked ok. I removed the 256 card & put a second 512 in.When i boot up i just get 3 beeps all of the same length & the monitor light goes green & then back to orange & the screen says no signal.We bought the tower cheap about 12 months ago at 256mb so i put another 512 in it which made a great improvement.Just wondering why when i try to upgrade further this is happening.If i remove the second 512 & put the 256 back in it works fine. .
After I installed a usb 2.0 card and triple my memory size. my monitor after about an hour stop working. I tried everything (or almost everything that I know). I reseat the battery on the motherboarb, disconnect and reconnect almost every wire, use different monitors` that I know works, still their is no signal going to my monitor when I boot.
I have Windows XP OS installed on my HP Pavilion 753n Desktop. I currently have 512MB SDRAM loaded, and want to upgrade with another 512MB. Is it necessary to update my BIOS settings (current BIOS on computer is dated 11 September 2002) prior to upgrading the memory?
I NEED urgent help, not THIS computer but the person I live with's computer is EXTREMELY slow, things take up to 10-20 minutes to open sometimes, it takes at least 15 minutes to start up or shut down, everything lags, we've tried EVERYTHING, virus scanning, spyware, malware, cleaning the registry, defraging the registry and harddrive, cleaning up, EVERYTHING, anytime you shut down after applying some sort of setting it says it's saving the settings and then you start it back up and it acts like it never saved it, it goes back to the OLD CRAPPY settings, puts every error back on that the program found, recently the boot.ini has become corrupt or invalid, there are two hard drives with plenty of space and we've had this problem for a couple of years! We can't figure out what to do, we both have the same computer, bought it at the same time, mine runs like a charm but their's does not at all, the cpu usage is sky high when you aren't doing anything and sometimes it is 0% when you ARE doing stuff. There is about 10 or more svchost.exe's running, two under a seperate username and none of which we can stop. There are diagnostic lights on the back BUT anytime there is anything wrong with the lights we look in the manual and on the offical website and NO ONE HAS THE LIGHT COMBONATION THAT WE DO!! It's a Dell Dimension 2400, right now it has both 512MB and a 128MB RAM memory stick, we can't upgrade the memory or it fails and starts beeping, Windows XP Home Edition,
I am using Intel pentium 4 cpu 2.40GHz, 1.25 GB RAM. Iam using 80 GB samsung hard disk. I installed Microsoft Windows XP Professional service pack 2 on a drive of 10 GB memory space with NTFS file system. After the installation of Win XP, the drive properties shows 4.9 GB of used memory and only 4.45 GB of free memory, but when I try to find total memory occupied for all the files in that drive (using "select-all" and properties) the used memory is only 2.3 GB only.
Now I don't understand the huge difference of this memories calculations. Where that extra used memory gone, when the total memory occupied by all the files is much less.
why my Windowx XP sees only 1024 MB memory while I've increased the original memory of 512 MB by 2x 512 MB ?My motherboard has three DDR-slots. It had from the beginning a Kingston K 512MB PC2700 module in slot #1. This week I've added two Kingston K512 UDIMM 512MB PC2700 modules in the slots #2 and #3.All three modules has the type name KVR333X64C25/512, so I thought they would be compatible.
I have Windows XP Pro. I have 2 PCI slots, one containing 120 mb and the other containing 256 mb giving me a total of 394 mb of memory. I bought 3 different sticks of 256 mb (due to I thought ram was bad, but its not.). I looked in Bios and it shows 2 sticks of 256 ram giving a total of 512 mb, BUT I had to take the new ram out due to when I would turn pc on a black screen would come up and I would select "start windows normally" and all that did was just keep rebooting. I have tried doing a bios update but unable due to when I put in the command on the command prompt it came back saying bad command.
I Have A Dell 4300s Computer Which I Recently Had Rebuilt. Went From 18 Gig To 80 Gigs. Added 512 Ram To Existing 128. Also Switched From Juno Dial Up To Verizon Dsl. Speed Was Great For Awhile, But Has Slowed Down Considerably. I Did Add 2.0 Usb Port, Spybot,an Epson 7800 Printer/scanner, And Several Other Programs. I Currently Have About 20 Icons On My Desktop.
I am running Windows XP in a Compaq Presario, with CD reader and CD/DVD burner. My question: How do I get a DVD(with photos and sound) onto a Flash Memory stick or an SD card??
I have a white box Pentium 4 CPU with XP professional service pack 2 build 2600 installed. The motherboard is an intel D865GLC with 512 MB RAM installed in Dual channel mode with 1 256 MB stick of ram in slot zero of bank 1 and 1 256 MB stick of ram in slot zero of bank 2. This memory is dual channel compatible. I tried to add another 2 sticks of the same type ram but from a different manufacturer. Here's the problem: I can use any 2 of the 4 sticks of ram together, both from the same manufacturer or 1 from 1 manufacturer and 1 from the other for a total of 512 MB. Everything works fine. I can place one stick in slot 0 of bank 1 and the other in slot 0 of bank 2 or I can place 1 in slot 1 bank 1 and 1 in slot 1 of bank 2 with no problems. I can even place a 3rd stick of the same type ram in any open slot and all's fine (except the machine complains that this is not an optimal memory setup). Memtest86 reports no errors with any of the above configurations
I was running Outlook, AIM, and IE at the same. After a few moment, I'd get this following message:
Your system is low on virtual memory. Windows is increasing the size of your Virtual Memory Paging file. During this process, memory requests for some applications may be denied.
When I hit OK, all my applications would close, except my Outlook. I'm running Win2K with 512 memory. My computer is only 1.5 years old. I didn't play any games or download anything so it's not heavily used. But why the message then?
I don't really have a problem on my hands, but I would like to ask a few questions relating to Virtual Memory and Memory Leak.
I downloaded a game back in December, but hasn't been installed as yet. I heard that it is created using "C++" or "C" (whatever it is), and I learned that it has a memory leak. My Virtual Memory was running low (it may already have beforehand) by the time the game was installed. My computer crashed two days later as a result.
But some users haven't experienced any problems with the game. My question is, is it a better idea for me to install the game on a CD-ROM or USB Drive and play it from that media type (instead of from the hard drive) so that I can protect my PC from crashing due to low virtual memory?
virtual memory and memory usage i need to know how to know this 2 perfomances and if we need to otuch something to upgrade memory and best usage for your pc.
I have a Ecs P4vxasd Motherboard, Pga socket 423. The mainboard accomodates 2 DDR 184 pin 2.5v + 2 SDR 168 pin 3.3v Dimm sockets with a total capacity of etting various blue screen errors, to go along with several reloads. I downloaded a memory diagnostic program from this site. My computer didn't pass the test, so I removed on stick and it passed this time. I assumed that the memory stick was my problem, and ordered a DDR 512 mb pc3200 stick from Curcial.com. I installed the new memory and got the same error from the diag. test. I began swapping memory around. all three sticks worked fine by themselves in either slot, but put two together & I would get a bad diag.
I keep getting the error message that my Windows virtual memory minimum is too low. I have Microsoft Windows 2000 and the following settings: total paging file size 205 MB; minimum 2 MB; Recommended 190 MB; Currently allocated 205 MB; current registry size 21 I'm not the system administrator so I can't change these numbers. I also couldn't find the pagefile.sys that someone suggested looking for. My IT guys don't know what's wrong; they reformatted my computer but I got this error message again. What should I tell them to do?
I have 3 memory slots on my motherboard. Two of them have 512MB DDR PC2700 chips. Can I put a 1GB chip in the third slot or would it have to be another 512MB chip?
I am having major trouble with windows explorer. Microsoft doesn't even have the error on their website, at least that i can find. The error reads: "The instruction at '0xfe9ed428' referenced memory at '0xfe9ed428'. The memory could not be 'read'."
I was just playing a game I bought recently, and after I got up to the second level, the models in the game weren't rendering properly, (some of the people were invisable etc), then it froze and gave me the following errors:
First error ~ Quote: Rendering thread exeption: General protection fault!
History: Adress =0x98aeb8 (filename not found) Adress =0x2 (filename not found) Second error ~ Quote: The instruction '0x009d8bd2' referenced memory at 0x0000001 the memory could not be "read" After these errors occurred, my desktop reverted to 6-bit color, and the lowest possible resolution, then wouldn't let me change it back.
