An Infinite Loop To Safemode / Changed The BOOT.INI Section
Aug 18, 2007
I changed the BOOT.INI section of msconfig to boot windows in Safemode. Upon getting in Safemode, the computer finally recognized USB devices and the CD drive again (wasn't doing so in normal mode). So, I insert a Windows XP disc, used the Advanced install mode (the one that overwrites the previous installation of Windows), and everything seemed to be going great.
However, the machine restarts and tells me this "Windows XP Setup cannot run under Safemode. Setup will restart now." and has an OK button. I click it, thinking it's going to boot into normal mode. Well, it doesn't. It boots up again, says the same thing.I click OK.Restart.Again.OK.On and on into infinity.
I was attempting to boot into safe mode through the BOOT.INI /SAFEBOOT function in MSCONFIG. After restarting to boot into safe mode, my computer would restart ten seconds into the login screen. This happens every single time and I cannot get back into Windows to uncheck the /SAFEBOOT box. The computer that I am typing on right now allows the user to choose the boot method before entering Windows. It has an old ASUS board and is running Windows XP Pro w/ SP2.
My primary computer (the one that is restarting) has an ASUS A8N-E and is running Windows XP Home w/ SP2, latest updates. Is there anything I can press (one of the F keys, perhaps?) that will prompt me to choose the booting method? Safe mode has restarted on me before, but not like this. I tried setting the motherboard to defualts in my BIOS, but that was just a stab in the dark, as I don't see what that has to do with this problem. I am thinking about setting my motherboard to defualts by opening up the case, etc. but I don't think that will do anything.
I was incredibly bored and I downloaded an old DOS VGA version of The Oregon Trail from the-underdogs. I used VDMsound to run it, and everything seemed to work alright until i got sick of the game and tried to quit. It locked up, i used ctrl-alt-del a few times, got impatient and stupidly switched off the computer just as i was being dumped back to windows. When i turned the computer back on, i was given the "safe mode" prompt, so i chose to start in safe mode. It then showed that list of system files(?) it was loading until it gets to "d347bus.sys" and asks if i want to press escape to skip loading it. Regardless of whether i press esc or not, it moves on to "SPTD.sys" and asks the same question. After i press escape (or not), i get a black screen, then the computer restarts again back to the safe mode prompt. If i try to "start windows normally" i get to the Windows XP loading screen, the progress bar moves a bit then the whole thing restarts again. Safe mode with command prompt, safe mode with networking, last known good configuration, none of these work, they all result in this maddening infinite loop.
The best solution to most issues with looping is POWER SUPPLY. Due to the huge amount of resources that video cards, sound cards, larger cpu's, they suck your power supply to the point that application cant perform. In turn it causes lockup, reboot and boot to desk top.A lot of resellers are only slapping in a 300watt power supply in newer systems. That doesn't work, you need at least a 400watt or greater. You need at least 450watt POWER SUPPLY. Take my word on it.This is the biggest issue i have studied on the net and in my lab for 1 1/2 years now. So many people have taken components back to the stores had them tested, to find out there is nothing wrong with them and go around shaking there heads in wonderment, without even considering power supply.
Computer is not is a very slight increase in memory voltage. i have tried basic standard voltage setting as well as slightly higher settings. A game, or anything using 3d or direct x causes the problem. at first i got a hang and total system freeze. had no error or bsod.specifically the game was FSX sp2. also occured with command and conquer red alert 3, and sins of a solar empire. additionaly 3dmark06 did the same thing. specifically the games or program would load fine but once it started the first screen or opening graphic it just freezes the entire system. i have to reboot via reset button. and windows load just fine. only 3d programs or games does this. no bsod until last night i finally got the nv4_disp infinite loop error.
Ok, I have solved "MY" nv4 loop error.It is not a software fix however. After I and most people have tried every fix out there, I decided to go to the root of the problem. The memory. I ran boot up with each DIMM alone. I use 3 1gb OCZ 6400's . 2 of these DIMM's ran any program that crashed before with no problem, only 1 did not. I ran the 2 DIMM's together and no more error. I have heard that there is an issue with the 680i motherboards giving incorrect voltage to memory or that it reads incorrect voltage . In either case on memory module is bad. While I consider this a final troubleshoot victory , it isnt cheap. But none the less im happy with the outcome.
I decided to do a fresh install of Windows XP Home. So, I put in the WinXP Install CD and set the BIOS to boot to CD. I deleted the partition (only one on my 60GB hard disk), created a new one, and formatted it NTFS - all by following directions in the Windows XP Setup program on the CD. Then I chose to setup WinXP on that formatted partition. The CD copies a bunch of files over, then tells me to remove disks and restart the computer. So, I do. I boots to the hard drive and gives me the "Windows XP Home Edition" screen with the moving green bar at the bottom while it's loading. Then it quickly goes to a rather blank screen that says "Setup is being restarted," strange moving lines cover the screen, and the computer restarts. It then does the same thing over, and over, and over again. I've tried repartitioning and restarting the setup process several times, trying every available option but after Windows Setup restarts the first time, it gets into that infinite loop of never proceeding to the next step of setup.
I have an Asus W3H00V (which came with the Mobility Radeon X600) that I use for word processing, internet, and watching videos, though never really use it for gaming. After about a couple of months of use, my laptop suddenly always hangs with a blue screen popping up saying that there's an infinite loop problem that's caused by the file ati2dvag.dll, especially when watching videos. I've tried uninstalling and installing Windows XP (w/ sp2) four times and also uninstalling and installing the ATI drivers that came with my computer numerous times but nothing seems to work. I can't get any work done on my computer because an error window also always pop up and hangs my computer very frequently. I've tried searching for solutions in the internet but none seems to work.
My desktop is stuck on an infinite startup loop, I can see the standards Windows starting screen then there is a quick BSOD flash and the computer restarts and does the same thing - lucky I have a spare old laptop which will allow me to jump onto this site. Safe mode options do not work I tried the Windows recovery console - typing 'R' booting from the CD but then I get stuck at the console black screen not knowing what DOS commands I should be pushing. I tried goign the other way and choosing to install XP but then I get a message saying C: isn;t configured and will need to format to continue.
I keep getting the error jCarousel: No width/height set for items. This will cause an infinite loop. Aborting how do i get rid of this i hit ok and it comes back.
My computer starts up normally.It always just autologs on since I'm the only one using my windows xp computer. However, before anything can be displayed it immediatley logs off to the logon screen. I click my username and start the login process (i have no password and before even switching to my wallpaper or anything it says stuff like logging out and saving your settings.
I tried booting in safe mode too and the same infinite logon loop occured to, even with the default administrator account. The last thing I remember doing before this happened is I was playing City of Heroes when it crashed forcing me to restart my computer. This happens occasionally in certain programs but I've never had anything like this happen before. I tried unplugging my keyboard, mouse, usb devices, ethernet cable, no luck. Intel Pentium 4 1.7 ghz Geforce 5600 FX 256 mb windows xp home service pack 1, in case any of that matters
I try rebooting but it always shows up in safemode.Although it appears when rebooting to be in normal setting because I don't see safemode checked in start up.
I have a Toshiba Laptop with Win XPPro. Won't boot-up to Windows. I first get a blue screen error message and then a black page with options: Safe Mode- Safe mode w/ Networking- Safe Mode w/ Command Prompt. None of these work; when I select one it just cycles back to this menu. I tried Win Logo Key /r but nothing. I can get into Set-Up. The computer was acting kind of fishy before it quit; the cursor would start moving left across the screen and I couldn't control it. I would shut-down and it would be ok, until it happened again. I did a Restore to try to repair it but the next time I turned on computer
Has been working fine for 3 days but it took a while to shutdown 2 days ago so I shut down with power switch.It now refuses to boot up. Goes through all usual till the 'start windows normally', run in safe mode' etc. The cursor will not move via any key on keyboard (although can use keyboard to access bios features) so I have no option other than to wait till 30 second timer countdown and it tries to start windows norally. After the 30 second countdown, the Windows splash screen appears half illuminated and it goes back to boot up again. Have tried to boot from CD (Windows disc) via Bios setting but the process continues as usual not allowing boot from disc.Have swapped Sata cables for new ones on DVD and HDD, tried to run windows setup with a brand new HDD but get BSOD after 2 minutes saying virus or HDD problem?Have tried swapping memory modules, removed graphics card and wifi card, nothing works!
It's a good thing I have another computer to use...otherwise, I don't know how I would be able to ask these questions.My other machine is an HP a730n, 1 Gb RAM, 3 GHz, running with AVG anti-virus, all Windows updates in place.The machine was on overnight. Two programs were running (photoeditor, word processor).This machine also has two external drives connected to it, through USB ports.When I turned on my monitor, there was an error message displayed, but I didn't write it down. I clicked okay, and then the machine proceeded to shut down, and now it is going through an endless loop of trying to start windows.It initially gives me a screen with the options of safe mode, safe mode with networking, or command prompt, letting it start with the last known working configuration, or start windows normally. I've tried the start windows normally several times, to no avail.In safe mode, I clicked on Administrator, which then said it was starting windows up, but I then got a window that said "winlogon.exe application error. The instruction at "0x7498aaba" referenced memory at "0x00000008." The memory could not be read. Click cancel to debug, and OK to close.I also tried the last known good configuration, with the endless loop continuing.
I don't really know where i should start so.well earlier today i installed a second hd in my computer to pull so files off of it for my sister and my mom, but when i got it working it said accsess was denied to there stuff i went on my moms computer to check if i hade already backed up there stuff of the old comp, so i go into her document to see if i could find the old documents and when i start scrolling through them the window freezes...so i leave it for a minute and while i'm waiting i close some other programs one of which was mozilla which was also frozen.I go back to the my document window and its still frozen.
I try to close it and of course its not responding so i click end now and it made the every thing disappear like the task bar and all the icons on the desktop are missing...so i wait and see if any thing will reappear and nothing does so i restart it and it starts booting up..the windows logo comes up and the little bars only gets half way across then it restarts and brings me to that menu where you can choose save mode or start normally and all that and no matter what i pick the comp just restarts and bring me back to the menu.
Installed SP3 today.The install seemed to go fine.Restarted the computer,now I am stuck in a boot loop computer starts, goes to the We apologies page.None of the load options work, computer simply shuts down and goes back to the same page. Since this computer was a Vista-ready computer,but I ordered it with Win XP Pro,I don't have the OEM Win XP Pro CD.Therefore, can't do a chkdsk.
I bought a computer for my wife and kids. Well months go by and my wife tries to install something and notices that the MAIN drive is H: not C:
I figured that it was weird but no big deal. Well I purchased a printer for her and while trying to install the software it was giving me a "Windows - No Disk in Drive" error.
I did some research and spoke to HP tech support and they suggested that I search the web for a way to change the drive letters from H: (current hard drive) to C: (supposed to be default drive)
I have been in the recovery console, I have tried making a winpe boot disk "Failed due to errors" tried fixing the MBR, even tried to connect to it remote with regedit to make some changes in the registry with out success. I have even installed another copy of win xp on another drive and booted the system up with the 250gig in it and changed the drive letter in there. After taking the one drive out and booting with the 250gig it still has a letter of "C:" and still the same login loop.
I recently Installed windows sp sp3 on my dell laptop and after i restarted the computer i found that i am stuck in a boot loop! i cannot boot to anything not safe mode or last known good config. Everytime it boots to normal windows, it gets to the boot screen scrolls across once and then stops and shows a blue screen for about a second, not enough time for me to see, and then it reboots and repeats the process. I have been able to see the bsod because of disabling the auto restart and it showed this stop : c0000221 unknown hard error systemrootsystem32 tdll.dll. When i boot into safe mode it gets to the agp440.sys or whatever it is then restarts.Now im pretty sure this is a common problem with sp3 installs, but isnt that normally on amd machines where you have to disable intelppm. Im running a dell with a pentium 4 m processor so it cant be that.
I'm working on an IBM ThinkCenter Desktop PC.On bootup, it goes through the IBM logo and then the Windows logo flashes quickly and then is gone and then the Safe Mode screen appears. No matter which option I choose from the Safe Mode screen, the result is the same: The Windows logo flashes quickly and then the system reboots, and then the IBM logo and then the Safe Mode Screen.I have tried running the repair module from an o/s disk I have here, but when I get to the c: prompt and type "dir" it says "error occurred during directory enumeration".There is only one partition.I have a copy of UBCD4WIN, if that would be helpful in diagnosing the problem.I do not have the o/s disk that belongs to this computer.
Windows XP Home but before it boots to the start up screen it freezes and crashes everytime. I went through many troubleshooting steps and am stuck in a rut. here's what I've done. Tried booting in safe mode, that failed as well. Seems like the OS is really messed up. Tried using a restore cd that includes Windows XP Home. But the boot order for the cd rom is last and so it keeps trying to boot windows first instead of starting up the restore disc. To fix that I went to the Bios. Tried changing the boot order but that was not available to me because they weren't an administrator.
There was an adminstrator password set protecting the boot order but they don't know what the password is because they bought it from ebay a long time ago and lost that person's contact information. So there is no way of finding out the admin password from the previous owner. So now we're in a jam, can't get to Dos, can't get to windows, can't boot from the cd rom to do anything.
I had left my computer on logged in on Windows 7 and when i got back the computer was in a continuous boot sequence (starts to boot, then after about 4 seconds shuts down and then over and over again). I reset the power from the back and turned it back on and it started up but with a different boot screen (Dynamic Energy Saver Quad6 Screen lol) and not the "black" one that normally comes up. It happened again last night and I think it happens when I leave my computer logged on in Windows 7. The weird thing was that after I reset the power from the socket (which stopped the loop) and turned it back on, it had me still logged on as a user and everything was like it was before I had left (basically like hibernate, except that hibernate is disabled on my computer
Had to replace motherboard in a PC and now I'm caught in a reboot loop. I keep getting the advanced boot option menuw where your asked wheather you want to Safe Boot, Safe Boot with Networking, etc. Which every choice I pick, the system reboots and takes back to the same place.what to use or if the Recovery Console will solve my problem.
What happened was recently my computer restarted out of nowhere when I was browsing the internet. When my computer restarted, it would not go past the windows loading screen and just reset (blue screen of death). I tried going into safe mode however, nothing seems to work other than booting Windows into 'debugging mode' and everything works fine.I'm trying to correct this problem by possibly using the Windows XP CD to repair Windows. Here's when I run into another problem. The Windows XP CD simply will not boot. I've tried changing the boot order in the bios but the 'press <any> key to boot from CD' will always be skipped no matter what. I've even tried different DVD/CD drives and different Windows XP CDs.
Before my latest power supply, when my computer booted, it would show the Welcome screen, then play the boot-up sound, then load the desktop. Now there is no boot sound cue until after the desktop loads. Is this something to be concerned about?
I've a neighbor down the hall using Win 2000. It will not boot. It shows a message as follows: CPU is unworkable or has been changed. Please recheck Soft Menu. I can get to the Soft Menu but any change results in the same message. I'm sorry that I don't have more information about the configuration of the PC.
I recently installed a new hard drive into a friends computer and installed XP Home. I ran all the updates and service packs.
I left later that day and let him install all his applications.
I got a call tonight from him saying he really screwed up and doesn't know what to do. I had to follow his thinking over the phone so I hope I get this all correct.
He had trouble loading the drivers for his HP printer. He would get an error saying that a C: empHP_WebRelease folder was missing. He did manage to figure out that for some reason when I installed XP it called the Boot drive "I" instead of "C"
my old boot drive was g: .. i followed this guide here and changed it to c:upon restarting .. the system doesn't load up .. it gets stuck on the Welcome screen and that's it .. am i screwed?
