WinSetup Infinite Loop / Quickly Goes To Blank Screen
Dec 7, 2004
I decided to do a fresh install of Windows XP Home. So, I put in the WinXP Install CD and set the BIOS to boot to CD. I deleted the partition (only one on my 60GB hard disk), created a new one, and formatted it NTFS - all by following directions in the Windows XP Setup program on the CD. Then I chose to setup WinXP on that formatted partition. The CD copies a bunch of files over, then tells me to remove disks and restart the computer. So, I do. I boots to the hard drive and gives me the "Windows XP Home Edition" screen with the moving green bar at the bottom while it's loading. Then it quickly goes to a rather blank screen that says "Setup is being restarted," strange moving lines cover the screen, and the computer restarts. It then does the same thing over, and over, and over again. I've tried repartitioning and restarting the setup process several times, trying every available option but after Windows Setup restarts the first time, it gets into that infinite loop of never proceeding to the next step of setup.
I have an Asus W3H00V (which came with the Mobility Radeon X600) that I use for word processing, internet, and watching videos, though never really use it for gaming. After about a couple of months of use, my laptop suddenly always hangs with a blue screen popping up saying that there's an infinite loop problem that's caused by the file ati2dvag.dll, especially when watching videos. I've tried uninstalling and installing Windows XP (w/ sp2) four times and also uninstalling and installing the ATI drivers that came with my computer numerous times but nothing seems to work. I can't get any work done on my computer because an error window also always pop up and hangs my computer very frequently. I've tried searching for solutions in the internet but none seems to work.
My computer starts up normally.It always just autologs on since I'm the only one using my windows xp computer. However, before anything can be displayed it immediatley logs off to the logon screen. I click my username and start the login process (i have no password and before even switching to my wallpaper or anything it says stuff like logging out and saving your settings.
I tried booting in safe mode too and the same infinite logon loop occured to, even with the default administrator account. The last thing I remember doing before this happened is I was playing City of Heroes when it crashed forcing me to restart my computer. This happens occasionally in certain programs but I've never had anything like this happen before. I tried unplugging my keyboard, mouse, usb devices, ethernet cable, no luck. Intel Pentium 4 1.7 ghz Geforce 5600 FX 256 mb windows xp home service pack 1, in case any of that matters
The best solution to most issues with looping is POWER SUPPLY. Due to the huge amount of resources that video cards, sound cards, larger cpu's, they suck your power supply to the point that application cant perform. In turn it causes lockup, reboot and boot to desk top.A lot of resellers are only slapping in a 300watt power supply in newer systems. That doesn't work, you need at least a 400watt or greater. You need at least 450watt POWER SUPPLY. Take my word on it.This is the biggest issue i have studied on the net and in my lab for 1 1/2 years now. So many people have taken components back to the stores had them tested, to find out there is nothing wrong with them and go around shaking there heads in wonderment, without even considering power supply.
Computer is not is a very slight increase in memory voltage. i have tried basic standard voltage setting as well as slightly higher settings. A game, or anything using 3d or direct x causes the problem. at first i got a hang and total system freeze. had no error or bsod.specifically the game was FSX sp2. also occured with command and conquer red alert 3, and sins of a solar empire. additionaly 3dmark06 did the same thing. specifically the games or program would load fine but once it started the first screen or opening graphic it just freezes the entire system. i have to reboot via reset button. and windows load just fine. only 3d programs or games does this. no bsod until last night i finally got the nv4_disp infinite loop error.
Ok, I have solved "MY" nv4 loop error.It is not a software fix however. After I and most people have tried every fix out there, I decided to go to the root of the problem. The memory. I ran boot up with each DIMM alone. I use 3 1gb OCZ 6400's . 2 of these DIMM's ran any program that crashed before with no problem, only 1 did not. I ran the 2 DIMM's together and no more error. I have heard that there is an issue with the 680i motherboards giving incorrect voltage to memory or that it reads incorrect voltage . In either case on memory module is bad. While I consider this a final troubleshoot victory , it isnt cheap. But none the less im happy with the outcome.
I changed the BOOT.INI section of msconfig to boot windows in Safemode. Upon getting in Safemode, the computer finally recognized USB devices and the CD drive again (wasn't doing so in normal mode). So, I insert a Windows XP disc, used the Advanced install mode (the one that overwrites the previous installation of Windows), and everything seemed to be going great.
However, the machine restarts and tells me this "Windows XP Setup cannot run under Safemode. Setup will restart now." and has an OK button. I click it, thinking it's going to boot into normal mode. Well, it doesn't. It boots up again, says the same thing.I click OK.Restart.Again.OK.On and on into infinity.
I was attempting to boot into safe mode through the BOOT.INI /SAFEBOOT function in MSCONFIG. After restarting to boot into safe mode, my computer would restart ten seconds into the login screen. This happens every single time and I cannot get back into Windows to uncheck the /SAFEBOOT box. The computer that I am typing on right now allows the user to choose the boot method before entering Windows. It has an old ASUS board and is running Windows XP Pro w/ SP2.
My primary computer (the one that is restarting) has an ASUS A8N-E and is running Windows XP Home w/ SP2, latest updates. Is there anything I can press (one of the F keys, perhaps?) that will prompt me to choose the booting method? Safe mode has restarted on me before, but not like this. I tried setting the motherboard to defualts in my BIOS, but that was just a stab in the dark, as I don't see what that has to do with this problem. I am thinking about setting my motherboard to defualts by opening up the case, etc. but I don't think that will do anything.
I was incredibly bored and I downloaded an old DOS VGA version of The Oregon Trail from the-underdogs. I used VDMsound to run it, and everything seemed to work alright until i got sick of the game and tried to quit. It locked up, i used ctrl-alt-del a few times, got impatient and stupidly switched off the computer just as i was being dumped back to windows. When i turned the computer back on, i was given the "safe mode" prompt, so i chose to start in safe mode. It then showed that list of system files(?) it was loading until it gets to "d347bus.sys" and asks if i want to press escape to skip loading it. Regardless of whether i press esc or not, it moves on to "SPTD.sys" and asks the same question. After i press escape (or not), i get a black screen, then the computer restarts again back to the safe mode prompt. If i try to "start windows normally" i get to the Windows XP loading screen, the progress bar moves a bit then the whole thing restarts again. Safe mode with command prompt, safe mode with networking, last known good configuration, none of these work, they all result in this maddening infinite loop.
My desktop is stuck on an infinite startup loop, I can see the standards Windows starting screen then there is a quick BSOD flash and the computer restarts and does the same thing - lucky I have a spare old laptop which will allow me to jump onto this site. Safe mode options do not work I tried the Windows recovery console - typing 'R' booting from the CD but then I get stuck at the console black screen not knowing what DOS commands I should be pushing. I tried goign the other way and choosing to install XP but then I get a message saying C: isn;t configured and will need to format to continue.
I keep getting the error jCarousel: No width/height set for items. This will cause an infinite loop. Aborting how do i get rid of this i hit ok and it comes back.
the blue screen comes up, & computer shuts down so quickly that i can never read enough to get any info pertaining to the problem.!? any way of finding out what it says.? after the fact (after it reboots)
I have given my sister my old Averatec laptop that has Windows XP on it. While she is using it, eventually a blue screen appears, which is the precursor to it restarting suddenly. It happens so fast that we cannot read what the blue screen says. After it starts back up, we get a microsoft report saying a serious error has occured. This might not help, but I'll list it just in case. The error signature is:Is this a virus? If so, is there any hope without reformatting? I accidentally uninstalled the program that contained the OS files when I first got the computer.
Well it started with winxp freezing during bootup, when it displays the windows logo with the blue bar shooting back and forth....then it would just freeze and quit moving. So i didnt want to deal with it, wanted to start over anyway, so i threw in the emachines winxp restore cd 1.0. Formatted the hard drive fine, rebooted, started the winxp setup. Chose my timeszones, agreed to some disclaimer... then i get to the next screen where it asks "What's your computer's name?". Hit next again, then it freezes again! It freeze right on the "What's your computer's name?" screen. The buttons go white (can select anything), then it acts like its about to take you to the next setup screen, but stays at the "What's your computer's name?" screen.Figured it for a bad hard driver. Went and got a new one, ran the same cds, and the same exact thing happens, freezes at "What's your computer's name?".
Upon turning on my PC, the I get as far as the Windows icon showing the system booting up, then an hour glass, then back to a black screen as the computer automatically reboots and begins the cycle again. I've done some research online and found others have worked on this problem with check disk commands and safe mode start ups. The problem is, even when started in safe mode, it reboots. I am not able to get to a command prompt at this point to try anything!
The machine is an HP pavillion 513n running windows XP. XP came installed when this desktop was purchased new 2 years ago. This particular computer is not even used to access the internet so I have a hard time believing its virus related. I've checked that the power supply is secure and the fan seems to be operating as usual. The only change I made to any software or systems today was to add several legitimate fonts to the control panel.
Very similar to the following problem but i do not have a raid, and it seems that this PC has a raid and i don't, plus it was never really determined what the actual solution was.
The basics: XP Professional Boot up screen, right before the windows loading screen, or direct after the F8 Menu if you hit "Start Windows Normally..." it will just lock up, no HDD activity, blank screen. now BSOD, nothing.
All 3 safe mods work fine.
Ran chkdsk /r in recovery. Ran proper fixboot procedure.
Went into safe mode and checked the event viewer.
The only concerning message i got was: The following boot-start or system-start driver(s) failed to load: AmdK8 Fips nod32drv
Formatting really isnt an issue since i can back up anything i need through safe mode. However its just the fact that the Windows gremlin has struck me again and i must defeat it once more.
I highly doubt this is a hardware issue as it is more of a driver/software issue.any help?
When i turn on,first Windows screen appears,then a blue screen blinks,then hp screen,then a blank page with cursor on the top left,then a screen with the message"we apologise for the inconvinience but Windows did not start successfully.there was a hardware or software problem.I tried to run it in Safe mode, Windows normally,last known configuration but no luck......Then someone suggested to Get into the Recovery Console by making a Recovery CD with ISO image but the machine is not responding to any of it.Is it with CD/DVD ROM drive or any major hardware problem???...I ran a self hard drive test and it seemed fine
I was playing a game and I rebooted my computer. When i went to start it it went to the a blank blue screen before the account screen in the beginning of XP. I know i can restore to new but i will have lost so much information that it would take about 3 months to retain it all back. It says it can not find operating system. I need help in a serious way. all advice and solutions are requested.
Using window xp pro I on computer.I'm using pentium 3..
It's fine loading bios and till window xp logo..
when it starting to load the welcome window screen.. (which it didnt reach the welcome screen at all)
It just stuck at the black screen.. so i try to run in safe mode, weirdly it able to open.. okie
i tried to reformat... but it doesnt seems to work, it happens the same thing..
b4 this happened.. it all started one day.. i let my computer to download some personal stuff.. then computer got hanged, and i just shut the computer just like that..so now, i cant reach the welcome screen at all..
i'm having to boot into windows xp. on power up sytem goes through the windows xp splash screen (with progress bar) and then instead of login prompt it goes just into the blue screen with moveable mouse pointer arrow.
issue seems to be similar to: http://forums.techguy.org/windows-nt...o-startup.html http://forums.techguy.org/windows-nt...p-problem.html but recommended solutions didn't help so far.
symptoms just before issue - was not able to run use some system features - utility to turn off the display, utility to bring up battery info - everything was working fine before this
what i've tried: boot to Last Known Good Configuration - resulting in the same blue screen
boot to Safe Mode / Safe Mode with networking / Safe Mode with comman prompt - resulting in blank (black) screen with "Safe Mode" in the corners and moveable mouse test the hardware (hard drive / memory etc.) via build in PC Doctor - all seems to be working i am able to use bootable XP CD from other machine to get into Recovery Console i am able to boot to simple live XP using BartPE-XPE usb key and access the hard drive
Hey my screen will go blank like it's starting up the screen saver after a few minutes on my PC. Then it will go back to what i was doing can i fix this?
There are 2 accounts in my XP Pro SP2 machine, one has admin rights, the other is limited. When I log into the limited account then log off, Windows does not return me to the welcome/login screen, instead it gives me a blank screen (my monitor, which uses DVI, gives me "No signal"). Pressing any key will not wake the computer. The only resort is to press the Reset button. I expect this to be either software or hardware incompatibility.
I tried to open an flv file in Winamp and XP froze up, and do not start up again except in Safe Mode. The XP splash screen comes up, but then the screen goes blank.
since I've not been able to update since way back in December (as far as NET Framework updates)...what's the quickest way to start over on this worthless item since I can't download particular programs on the Internet, without it? I have Windows XP Media Center SP 2. I also have KB890859 installed. (Added to this crappy lining in my cloud is not being able to get a couple other updates now, i.e. Rollup 2, etc)
I was using MSN aquarium screensaver, and it locked up the screen. I rebooted and changed to pipes. This was ok for a couple of weeks, and then pipes locked up. Now I have changed to bezel, and the screen just fadeds in and out and then goes blank. When I try to change back I get a message that properties is not responding. Has anyone a fix for this?
Randomly I will get a blank white screen, or a white screen with vertical lines. When this happens the only thing I can do is turn the computer off. It has always rebooted successfully and no data has been lost, however it is a great annoyance. I have looked in the event viewer and don't find anything unusual.
I have the same screen described in the posts below, I tried to follow the same steps, but the same files (kvkruz) are not in my C:Windows, and the same items were not there.
When I open my recylce bin it shows nothing, only a blank screen, as if there were no files in it. But when I click to empty the recylce bin I get the delete confirmation "are you sure you want to delete these 83 items?" If I click yes, the little empty sound plays, but if I empty the bin again I get the exact same delete message. Why can't I see these files and why can't I delete them? Running windows xp with sp2.
