Tried To Boot Into Safe Mode; Infinite Restart Loop
Aug 4, 2006
I was attempting to boot into safe mode through the BOOT.INI /SAFEBOOT function in MSCONFIG. After restarting to boot into safe mode, my computer would restart ten seconds into the login screen. This happens every single time and I cannot get back into Windows to uncheck the /SAFEBOOT box. The computer that I am typing on right now allows the user to choose the boot method before entering Windows. It has an old ASUS board and is running Windows XP Pro w/ SP2.
My primary computer (the one that is restarting) has an ASUS A8N-E and is running Windows XP Home w/ SP2, latest updates. Is there anything I can press (one of the F keys, perhaps?) that will prompt me to choose the booting method? Safe mode has restarted on me before, but not like this. I tried setting the motherboard to defualts in my BIOS, but that was just a stab in the dark, as I don't see what that has to do with this problem. I am thinking about setting my motherboard to defualts by opening up the case, etc. but I don't think that will do anything.
View 2 Replies
ADVERTISEMENT
Aug 6, 2007
I was incredibly bored and I downloaded an old DOS VGA version of The Oregon Trail from the-underdogs. I used VDMsound to run it, and everything seemed to work alright until i got sick of the game and tried to quit. It locked up, i used ctrl-alt-del a few times, got impatient and stupidly switched off the computer just as i was being dumped back to windows. When i turned the computer back on, i was given the "safe mode" prompt, so i chose to start in safe mode. It then showed that list of system files(?) it was loading until it gets to "d347bus.sys" and asks if i want to press escape to skip loading it. Regardless of whether i press esc or not, it moves on to "SPTD.sys" and asks the same question. After i press escape (or not), i get a black screen, then the computer restarts again back to the safe mode prompt. If i try to "start windows normally" i get to the Windows XP loading screen, the progress bar moves a bit then the whole thing restarts again. Safe mode with command prompt, safe mode with networking, last known good configuration, none of these work, they all result in this maddening infinite loop.
View 2 Replies
View Related
Mar 9, 2010
My desktop is stuck on an infinite startup loop, I can see the standards Windows starting screen then there is a quick BSOD flash and the computer restarts and does the same thing - lucky I have a spare old laptop which will allow me to jump onto this site. Safe mode options do not work I tried the Windows recovery console - typing 'R' booting from the CD but then I get stuck at the console black screen not knowing what DOS commands I should be pushing. I tried goign the other way and choosing to install XP but then I get a message saying C: isn;t configured and will need to format to continue.
View 4 Replies
View Related
Sep 8, 2006
My computer is stuck in what i think of as a restart loop. After powering on, windows xp screen appears (w/moving bar at bottom) sits there for about 7-10 sec then screen goes blank and about 3 sec later it restarts. Windows login does not appear. It will continously loop thru this process. At first Safe mode only started with out networking options. But now I can't start in safe mode at all it just reboots the computer after the scrolling screen of items being started. I am not sure what this could be, and have no idea how to get at least safe mode working.
View 3 Replies
View Related
Aug 21, 2007
I'm working on an IBM ThinkCenter Desktop PC.On bootup, it goes through the IBM logo and then the Windows logo flashes quickly and then is gone and then the Safe Mode screen appears. No matter which option I choose from the Safe Mode screen, the result is the same: The Windows logo flashes quickly and then the system reboots, and then the IBM logo and then the Safe Mode Screen.I have tried running the repair module from an o/s disk I have here, but when I get to the c: prompt and type "dir" it says "error occurred during directory enumeration".There is only one partition.I have a copy of UBCD4WIN, if that would be helpful in diagnosing the problem.I do not have the o/s disk that belongs to this computer.
View 2 Replies
View Related
Aug 18, 2007
I changed the BOOT.INI section of msconfig to boot windows in Safemode. Upon getting in Safemode, the computer finally recognized USB devices and the CD drive again (wasn't doing so in normal mode). So, I insert a Windows XP disc, used the Advanced install mode (the one that overwrites the previous installation of Windows), and everything seemed to be going great.
However, the machine restarts and tells me this "Windows XP Setup cannot run under Safemode. Setup will restart now." and has an OK button. I click it, thinking it's going to boot into normal mode. Well, it doesn't. It boots up again, says the same thing.I click OK.Restart.Again.OK.On and on into infinity.
View 14 Replies
View Related
Mar 27, 2008
A family members sony vaio will not boot up, the computer doesnt load windows XP (The windows XP loading screen appears but will then goes blank and reboots automatically.) When the computer first turns on a blank screen appears with text saying "we're sorry for the inconvienice, etc..." then has a 30 second timer for which option i would like to choose.These are my options below (which none work).
It doesnt work on Safe Mode, Safe Mode (Networking), Safe Mode (Command Prompt) or even the "last known to work configurations". Im totally lost on what i can do from here. I need assistence people!!
View 11 Replies
View Related
Aug 8, 2008
I had a problem with windows xp rebooting after everytime during the loading screen. I tried doing chkdsk /k with no use and then I tried to repair the installation. Now i can't finish the setup and can't access safe mode because it says. Windows XP setup can't run in safe mode.
View 1 Replies
View Related
Mar 21, 2006
I am not really a computer whizzkid but am not afraid to give most things a go ever since powering down for a holiday my xp start up is in a loop. Clicking f8 and trying to access safe mode doesn't work either. Have tried "last known settings" but still no luck although it does get me a bit further but then I get the message ODBC32.dll was not found in the winlogon.exe box. Then MPR.dll was not found message appears. Is there anyway I can access the c prompt and do anything or should I have a restore disc somewhere that I haven't found supplied when I purchased the PC
View 5 Replies
View Related
Sep 9, 2002
The best solution to most issues with looping is POWER SUPPLY. Due to the huge amount of resources that video cards, sound cards, larger cpu's, they suck your power supply to the point that application cant perform. In turn it causes lockup, reboot and boot to desk top.A lot of resellers are only slapping in a 300watt power supply in newer systems. That doesn't work, you need at least a 400watt or greater. You need at least 450watt POWER SUPPLY. Take my word on it.This is the biggest issue i have studied on the net and in my lab for 1 1/2 years now. So many people have taken components back to the stores had them tested, to find out there is nothing wrong with them and go around shaking there heads in wonderment, without even considering power supply.
View 9 Replies
View Related
Nov 18, 2007
I have been trying to play Half-Life 2, but at certain loading screens, it throws me the nv4_disp infinite loop error.
View 6 Replies
View Related
Dec 23, 2008
Computer is not is a very slight increase in memory voltage. i have tried basic standard voltage setting as well as slightly higher settings. A game, or anything using 3d or direct x causes the problem. at first i got a hang and total system freeze. had no error or bsod.specifically the game was FSX sp2. also occured with command and conquer red alert 3, and sins of a solar empire. additionaly 3dmark06 did the same thing. specifically the games or program would load fine but once it started the first screen or opening graphic it just freezes the entire system. i have to reboot via reset button. and windows load just fine. only 3d programs or games does this. no bsod until last night i finally got the nv4_disp infinite loop error.
View 6 Replies
View Related
Jan 5, 2009
Ok, I have solved "MY" nv4 loop error.It is not a software fix however. After I and most people have tried every fix out there, I decided to go to the root of the problem. The memory. I ran boot up with each DIMM alone. I use 3 1gb OCZ 6400's . 2 of these DIMM's ran any program that crashed before with no problem, only 1 did not. I ran the 2 DIMM's together and no more error. I have heard that there is an issue with the 680i motherboards giving incorrect voltage to memory or that it reads incorrect voltage . In either case on memory module is bad. While I consider this a final troubleshoot victory , it isnt cheap. But none the less im happy with the outcome.
View 1 Replies
View Related
Dec 7, 2004
I decided to do a fresh install of Windows XP Home. So, I put in the WinXP Install CD and set the BIOS to boot to CD. I deleted the partition (only one on my 60GB hard disk), created a new one, and formatted it NTFS - all by following directions in the Windows XP Setup program on the CD. Then I chose to setup WinXP on that formatted partition. The CD copies a bunch of files over, then tells me to remove disks and restart the computer. So, I do. I boots to the hard drive and gives me the "Windows XP Home Edition" screen with the moving green bar at the bottom while it's loading. Then it quickly goes to a rather blank screen that says "Setup is being restarted," strange moving lines cover the screen, and the computer restarts. It then does the same thing over, and over, and over again. I've tried repartitioning and restarting the setup process several times, trying every available option but after Windows Setup restarts the first time, it gets into that infinite loop of never proceeding to the next step of setup.
View 14 Replies
View Related
Apr 12, 2006
I have an Asus W3H00V (which came with the Mobility Radeon X600) that I use for word processing, internet, and watching videos, though never really use it for gaming. After about a couple of months of use, my laptop suddenly always hangs with a blue screen popping up saying that there's an infinite loop problem that's caused by the file ati2dvag.dll, especially when watching videos. I've tried uninstalling and installing Windows XP (w/ sp2) four times and also uninstalling and installing the ATI drivers that came with my computer numerous times but nothing seems to work. I can't get any work done on my computer because an error window also always pop up and hangs my computer very frequently. I've tried searching for solutions in the internet but none seems to work.
View 2 Replies
View Related
Nov 10, 2009
I keep getting the error jCarousel: No width/height set for items. This will cause an infinite loop. Aborting how do i get rid of this i hit ok and it comes back.
View 1 Replies
View Related
Nov 12, 2007
I'm running XP and I need to restart my system in safe mode, but evertime i try run safe mode it freezes on certain drivers.First it froze on agp440.sys and now it is freezing up on mup.sys .
View 10 Replies
View Related
Feb 19, 2006
trying to restart computer in safe mode, when i press f8 it takes me too the safe mode options, but when I select safe mode w/networking or safe mode, I get a black screen w/lines of jibberish and the screen freezes and wont let me do anything until I restart in normal mode which works fine, but I'd still like too restart in safe mode if needed by the way the jibberish is about 15 lines all start like this: multi(0)disk(0)rdisk(0)partition.
View 9 Replies
View Related
Sep 15, 2007
I don't really know where i should start so.well earlier today i installed a second hd in my computer to pull so files off of it for my sister and my mom, but when i got it working it said accsess was denied to there stuff i went on my moms computer to check if i hade already backed up there stuff of the old comp, so i go into her document to see if i could find the old documents and when i start scrolling through them the window freezes...so i leave it for a minute and while i'm waiting i close some other programs one of which was mozilla which was also frozen.I go back to the my document window and its still frozen.
I try to close it and of course its not responding so i click end now and it made the every thing disappear like the task bar and all the icons on the desktop are missing...so i wait and see if any thing will reappear and nothing does so i restart it and it starts booting up..the windows logo comes up and the little bars only gets half way across then it restarts and brings me to that menu where you can choose save mode or start normally and all that and no matter what i pick the comp just restarts and bring me back to the menu.
View 1 Replies
View Related
May 3, 2005
I went into MSCONFIG and checked the box to go into safe mode so i could run some virus scans and adware scans and stuff like that. Now when it gets to the desktop it has the window that says Loading Windows and then after like 2-3 min. it says password is incorrect and that i should retype it and becarefull of caps lock and stuff like that. The thing is don't have a password. It does this when i boot normally too but it lets me hit ok and hit Cancel without a password entered.
All of a sudden it tries logging me in automatically when I start up but the thing is i dont need to log in. So I try to go back into normal mode and Ican't. I hit F8 during startup and went to the Boot Normally option but it still does to safe mode. What do I do? How do I log on or how do I get rid of this password thing? One more thing, the window that tells me the password is wrong has an OK box but theres no mouse on the screen for me to click it and I can't use the keyboard to select it.
View 14 Replies
View Related
Sep 22, 2004
My computer starts up normally.It always just autologs on since I'm the only one using my windows xp computer. However, before anything can be displayed it immediatley logs off to the logon screen. I click my username and start the login process (i have no password and before even switching to my wallpaper or anything it says stuff like logging out and saving your settings.
I tried booting in safe mode too and the same infinite logon loop occured to, even with the default administrator account. The last thing I remember doing before this happened is I was playing City of Heroes when it crashed forcing me to restart my computer. This happens occasionally in certain programs but I've never had anything like this happen before. I tried unplugging my keyboard, mouse, usb devices, ethernet cable, no luck. Intel Pentium 4 1.7 ghz Geforce 5600 FX 256 mb windows xp home service pack 1, in case any of that matters
View 10 Replies
View Related
Mar 20, 2007
I have a dual boot linux/xp system.I was looking at partitions - just listing them - in linux, and now win xp won't come up in normal mode. It will come up in safe mode, however. Can you help me get my "normal mode" back?When the horizontal moving bar comes up in normal mode, it just goes on forever. I see the disk light go on for about 8 cycles of the bar. It usually runs 11 cycles before giving me the user selection screen. Now the disk light goes out after cycle 8, and the bar keeps going. I waited 32 cycles before giving up.
View 1 Replies
View Related
Nov 23, 2009
I have a Windows XP Professional Edition and i incurred a spyware virus on my PC, so i made a dumb decision by running MSCONFIG and changing my SAFEBOOT option, I did this because previously I couldn't even get into Safe Mode, it would load the files on the screen.
View 1 Replies
View Related
Jul 25, 2008
Recently I was playing a game when my computer froze up, when I restarted it, it froze every time on the Windows XP bootscreen. It boots fine in Safe mode with networking. (I'm typing this post on this computer)
View 2 Replies
View Related
Jan 29, 2009
I have a pc with Windows XP with SP2 installed. My computer has generally worked fine with little issues, but the other day Norton flagged up a virus issue. The virus was called Trojan.Patchep!inf, and couldn't be removed using Norton.Naturally, I'd have posted this in the malware removal/HJT forum, but I'm now locked out of my system.I need a way to be able to get into Windows before I can pull off any HJT logs or run any applications.The issue I have, is when Windows is loading up. I turn on my computer, and Windows boots up until the scrollbar/loading page. The computer then automatically reboots, and the cycle continues until I just hold the off button to turn off the computer. I've entered the boot menu and attempted the reboot in Safe Mode, and also tried using last working configuration. This has no effect, and still results in the constant restarting of the system.
I don't have a Windows XP disc as it was pre-installed when I bought the computer.For the time being I can boot from disc using Linux Ubuntu. I read about the virus that infected my system, which suggests that files such as winlogon are affected by the virus, which would explain my problems booting. Would it be possible to repair these files from Ubuntu, allowing me to boot the computer with Windows? I can then start a thread in the malware forum, posting HJT logs etc.
View 2 Replies
View Related
Nov 6, 2008
Is there any other way to boot in safe mode than F8? Windows XP is not loading properly. It is going to my background with the cursor, but nothing else. I tired to run msconfig from the task manager, but it didn't open. I want to boot in safe mode to do a system restore, but when I restart the computer, the F8 option says "to enable system configuration."
View 14 Replies
View Related
May 17, 2007
When I hit the F8 key, my Windows XP Pro OS takes me to the boot menu screen. I click on Safe Mode, and it scrolls with all the script, briefly, and then kicks into regular boot mode! Normally, with Safe Mode, it scrolls with the funny looking script, stays still for a few moments, and then goes into Safe Mode (after a prompt).
View 11 Replies
View Related
Jul 27, 2010
I was playing a video game when all of a sudden the graphics messed up, i could still hear the audio but the graphics were all messed up. About 30 seconds after this began it froze, about a minute later the blue screen of death came on with the error message 0x0000007E.When i restart my computer, the first screen is the Asus m424 MB start up screen and it lets me press delete to go into bios. If i dont go into bios, the next screen is just a black screen. It permenately stays this way. In Bios i can see the SATA hdd and all its specs, i can see the memory. My mother board does not have an onboard video slot, so since i can still see the bios with the monitor plugged in through the Video card, does this mean the Video card is still good? I think its either the mother board or the video that has been fried. Everything looks to be fine. I also tried booting from the XP disc and repairing windows, it did not work. I can also not boot up in any Safe mode at all. This includes VGA Mode, and all the Safe Modes. I get like 10 lines of .sys,
View 7 Replies
View Related
Sep 17, 2009
Last night while using my laptop, The screen just went black and wouldn't come back. So booted the computer, and then while booting it had weird green lines up and down the normal windows loading screen. and then when it should have booted up it just went to a weird white screen. I turned it off, tooke the battery out and let it be for awhile, and then when I went back it worked fine, until once again the screen went black. Today it won't start up without safe mode (im on it right now). I ran Spybot, Avast, Malware Bytes, bazooka and it still won't boot.Comp is a Dell Inspiron 9400, 2 GB ram, Geforce Vid card, Windows XP Pro. It was formatted a few months ago, and was running fine before this happed.
View 14 Replies
View Related
Mar 12, 2010
I was wondering if anyone here has come across this type of error before. My sisters laptop (Fujitsu Siemens) running on XP was working fine without any malware etc, then one morning she went to switch it on, and it would not boot up into windows xp. The screen switches on and displays the fujitsu siemens logo, then becomes unresponsive. I have tried adjusting most parameters and booting in safe mode.
However I have not had any success with this.
When booting in safe mode, I receive the following error code:
muti(0)disk(0)rdisk(0)partition(1)WINDOWSsystem32 toskrnl.exe
muti(0)disk(0)rdisk(0)partition(1)WINDOWSsystem32hal.dll
muti(0)disk(0)rdisk(0)partition(1)WINDOWSsystem32KDCOM.DLL...
I notice that BOOTVID and Drivers are both mentioned in these errors, so i am sure this is what is preventing XP from starting. The obvious thing to do would be to reboot windows from scratch, but the problem is, XP came preinstalled on the laptop, and therefore, I have no access to files necessary for a reboot. Would anyone know if this computer beyond repair, or is it possible to restore windows in some way?
View 7 Replies
View Related
Jun 1, 2006
i cannot boot into safe mode i go through the motions tapping f8 than it goes as far as it lets me select what option i want. i tried safe mode only and safe mode with networking and than it goes to the screen that has all the words across it and than sometimes it boots right into normal mode or it sometimes goes as far as getting into safe mode with the two signin icons on desktop my name and admin which is me too and when i click on either of them it boots right into normal mode.
View 11 Replies
View Related
