Ati2dvag.dll File / Infinite Loop Blue Screen Comes
Apr 12, 2006
I have an Asus W3H00V (which came with the Mobility Radeon X600) that I use for word processing, internet, and watching videos, though never really use it for gaming. After about a couple of months of use, my laptop suddenly always hangs with a blue screen popping up saying that there's an infinite loop problem that's caused by the file ati2dvag.dll, especially when watching videos. I've tried uninstalling and installing Windows XP (w/ sp2) four times and also uninstalling and installing the ATI drivers that came with my computer numerous times but nothing seems to work. I can't get any work done on my computer because an error window also always pop up and hangs my computer very frequently. I've tried searching for solutions in the internet but none seems to work.
I decided to do a fresh install of Windows XP Home. So, I put in the WinXP Install CD and set the BIOS to boot to CD. I deleted the partition (only one on my 60GB hard disk), created a new one, and formatted it NTFS - all by following directions in the Windows XP Setup program on the CD. Then I chose to setup WinXP on that formatted partition. The CD copies a bunch of files over, then tells me to remove disks and restart the computer. So, I do. I boots to the hard drive and gives me the "Windows XP Home Edition" screen with the moving green bar at the bottom while it's loading. Then it quickly goes to a rather blank screen that says "Setup is being restarted," strange moving lines cover the screen, and the computer restarts. It then does the same thing over, and over, and over again. I've tried repartitioning and restarting the setup process several times, trying every available option but after Windows Setup restarts the first time, it gets into that infinite loop of never proceeding to the next step of setup.
im new I have a Toshiba Equium EA60-173 PSA67E-00700C8J.Im having often reoccuring problems almost as soon as i reboot my laptop freezes and a blue screen appears saying the ati2davg display driver is stuck in an infinate loop. and my laptop has to be rebooted, also it freezes and changes to the lowest display settings and a window appears saying the display driver it has stopped working properly. I need advise on how to sort this as its very annoying, my laptop also over heats, gets very hot and just turns itself off. the fan constantly runs.
My computer starts up normally.It always just autologs on since I'm the only one using my windows xp computer. However, before anything can be displayed it immediatley logs off to the logon screen. I click my username and start the login process (i have no password and before even switching to my wallpaper or anything it says stuff like logging out and saving your settings.
I tried booting in safe mode too and the same infinite logon loop occured to, even with the default administrator account. The last thing I remember doing before this happened is I was playing City of Heroes when it crashed forcing me to restart my computer. This happens occasionally in certain programs but I've never had anything like this happen before. I tried unplugging my keyboard, mouse, usb devices, ethernet cable, no luck. Intel Pentium 4 1.7 ghz Geforce 5600 FX 256 mb windows xp home service pack 1, in case any of that matters
The best solution to most issues with looping is POWER SUPPLY. Due to the huge amount of resources that video cards, sound cards, larger cpu's, they suck your power supply to the point that application cant perform. In turn it causes lockup, reboot and boot to desk top.A lot of resellers are only slapping in a 300watt power supply in newer systems. That doesn't work, you need at least a 400watt or greater. You need at least 450watt POWER SUPPLY. Take my word on it.This is the biggest issue i have studied on the net and in my lab for 1 1/2 years now. So many people have taken components back to the stores had them tested, to find out there is nothing wrong with them and go around shaking there heads in wonderment, without even considering power supply.
Computer is not is a very slight increase in memory voltage. i have tried basic standard voltage setting as well as slightly higher settings. A game, or anything using 3d or direct x causes the problem. at first i got a hang and total system freeze. had no error or bsod.specifically the game was FSX sp2. also occured with command and conquer red alert 3, and sins of a solar empire. additionaly 3dmark06 did the same thing. specifically the games or program would load fine but once it started the first screen or opening graphic it just freezes the entire system. i have to reboot via reset button. and windows load just fine. only 3d programs or games does this. no bsod until last night i finally got the nv4_disp infinite loop error.
Ok, I have solved "MY" nv4 loop error.It is not a software fix however. After I and most people have tried every fix out there, I decided to go to the root of the problem. The memory. I ran boot up with each DIMM alone. I use 3 1gb OCZ 6400's . 2 of these DIMM's ran any program that crashed before with no problem, only 1 did not. I ran the 2 DIMM's together and no more error. I have heard that there is an issue with the 680i motherboards giving incorrect voltage to memory or that it reads incorrect voltage . In either case on memory module is bad. While I consider this a final troubleshoot victory , it isnt cheap. But none the less im happy with the outcome.
I changed the BOOT.INI section of msconfig to boot windows in Safemode. Upon getting in Safemode, the computer finally recognized USB devices and the CD drive again (wasn't doing so in normal mode). So, I insert a Windows XP disc, used the Advanced install mode (the one that overwrites the previous installation of Windows), and everything seemed to be going great.
However, the machine restarts and tells me this "Windows XP Setup cannot run under Safemode. Setup will restart now." and has an OK button. I click it, thinking it's going to boot into normal mode. Well, it doesn't. It boots up again, says the same thing.I click OK.Restart.Again.OK.On and on into infinity.
I was attempting to boot into safe mode through the BOOT.INI /SAFEBOOT function in MSCONFIG. After restarting to boot into safe mode, my computer would restart ten seconds into the login screen. This happens every single time and I cannot get back into Windows to uncheck the /SAFEBOOT box. The computer that I am typing on right now allows the user to choose the boot method before entering Windows. It has an old ASUS board and is running Windows XP Pro w/ SP2.
My primary computer (the one that is restarting) has an ASUS A8N-E and is running Windows XP Home w/ SP2, latest updates. Is there anything I can press (one of the F keys, perhaps?) that will prompt me to choose the booting method? Safe mode has restarted on me before, but not like this. I tried setting the motherboard to defualts in my BIOS, but that was just a stab in the dark, as I don't see what that has to do with this problem. I am thinking about setting my motherboard to defualts by opening up the case, etc. but I don't think that will do anything.
I was incredibly bored and I downloaded an old DOS VGA version of The Oregon Trail from the-underdogs. I used VDMsound to run it, and everything seemed to work alright until i got sick of the game and tried to quit. It locked up, i used ctrl-alt-del a few times, got impatient and stupidly switched off the computer just as i was being dumped back to windows. When i turned the computer back on, i was given the "safe mode" prompt, so i chose to start in safe mode. It then showed that list of system files(?) it was loading until it gets to "d347bus.sys" and asks if i want to press escape to skip loading it. Regardless of whether i press esc or not, it moves on to "SPTD.sys" and asks the same question. After i press escape (or not), i get a black screen, then the computer restarts again back to the safe mode prompt. If i try to "start windows normally" i get to the Windows XP loading screen, the progress bar moves a bit then the whole thing restarts again. Safe mode with command prompt, safe mode with networking, last known good configuration, none of these work, they all result in this maddening infinite loop.
My desktop is stuck on an infinite startup loop, I can see the standards Windows starting screen then there is a quick BSOD flash and the computer restarts and does the same thing - lucky I have a spare old laptop which will allow me to jump onto this site. Safe mode options do not work I tried the Windows recovery console - typing 'R' booting from the CD but then I get stuck at the console black screen not knowing what DOS commands I should be pushing. I tried goign the other way and choosing to install XP but then I get a message saying C: isn;t configured and will need to format to continue.
I keep getting the error jCarousel: No width/height set for items. This will cause an infinite loop. Aborting how do i get rid of this i hit ok and it comes back.
I'm in the process of repair/recovery of my machine (Dell Inspiron 8500 with Windows XP Home, Service Pack 2). I'm following exactly the instructions in:
http://attachments.techguy.org/attac...chmentid=62075, but a problem has developed. The "software" file (which is the file that the original blue screen error message says is "corrupt, absent or not writable") will not copy to the new tmp directory to create the backup. My understanding from the article is that this backup file (software.bak) will later be used to restore correct settings for various software applications. Since I can't copy it, it appears that I am screwed,
was getting a blue screen 07A was told by computer techs without looking it was either my hard drive or my operating system. Checked my hard drive several different ways and no problems. So I went to do a Windows XP repair instead of complete reinstall as they are a pain. After a long time it came back that couldn't do this because SPCMDCOM>SYS file was missing and couldn't repair from recovery console without it. My hard drive was replaced by Dell in July of 05 I think. What can I do without going to extremes? Secondly can I install my cd/dvd rom on my other Dell PC with discs I already have? I am very aggravated. I want to try to save at least 1 computer. On the 1st PC about 2 months ago I had my 17 inch flat panel go out it starts but then go black, I am using the 2nd computers screen!
i got on it, and it started loading the splash screen with windows xp on but then this blue screen error came on.
below is the error message.
stop: c0000218 {Registry FILE FAILURE} The registry cannot load the hive (file): SYSTEMROOTSYSTEM32CONFIGSOFTWARE or its log or alternative. it is corrupt, absent, or not writable.
I installed a fresh copy of Windows XP sp2, and just now I've noticed that when I open a movie the blue screen appears.the screen contains the following error:"at the beginning"DRIVER_IRQL_NOT_LESS_OR_EQUAL (now this is the error)
I did not add any new memory to my systeme. however, I did remove my current memory to access the inside of my laptop. The fan wire had come loose so I reconnected. I fixed that problem only to find out the problem with the registry. I have chose the load last known configuration that worked correctly but it still gives me the little blue pop up screen with the error, then the restart.
I tried to use my windows xp os disk to try and repair it but it wont read the disc before the blue screen comes back up. I'm thinking of buying a Laptop To IDE Hard Drive Adapter. So, I could at least format my hard drive. I'm not sure if this would be a good idea. I went to the microsoft webpage that deals with this issue but I can not seem to find one to fix my problem.
Error message(blue screen of death): "STOP: c0000218{registry file failure} the registry cannot load the hive(file): systemrootsystem32configsoftware or its log or alternate it is corrupt, absent, or not writable
beginning dump of physical memory physical memory dump complete. contact your system administator or technical support group for further assistance." I was told that windows needed to be rebooted. So I moved my hard drive to another comp and transfered all my memory onto an external hard drive so I could reboot windows. I found an xp cd and tried to reboot from ide cd-rom and it wouldnt work. i ran a diagnostics on my ide and this error came up "primary ide: 0 st380011a- fail code 7"
I'm gettting a blue screen when i try to start my laptop with Windows XP media. It's saying the registry cannot load the hive (file): /SystemRootSystem32ConfigSECURITY or its log or alternate. It is corrupt, absent, or not writable. I'm guessing I need the windows xp media reinstallation disk, but I can't seem to find it.
when my PC boots it up it goes to a black screen giving options such as safe mode etc. All of these options end up with the computer going to a bluescreen and the following message: STOP: c0000218 (Registry File Failure) The registry cannot load the hive (file): SystemRootSystem32ConfigSOFTWARE It is corrupt, absent, or not writable. Beginning dump of physical memory Physical memory dump complete. have no disks at all with laptop. And my knowldge goes as far as being able to use the internet.
Upon turning on my PC, the I get as far as the Windows icon showing the system booting up, then an hour glass, then back to a black screen as the computer automatically reboots and begins the cycle again. I've done some research online and found others have worked on this problem with check disk commands and safe mode start ups. The problem is, even when started in safe mode, it reboots. I am not able to get to a command prompt at this point to try anything!
The machine is an HP pavillion 513n running windows XP. XP came installed when this desktop was purchased new 2 years ago. This particular computer is not even used to access the internet so I have a hard time believing its virus related. I've checked that the power supply is secure and the fan seems to be operating as usual. The only change I made to any software or systems today was to add several legitimate fonts to the control panel.
I need some links to some sites that will provide information and also fixes for blue screen errors in Win NT/2000/XP. I will be using them on my website, which in turn will be used at my workplace. Thanks for any help that you can offer.
My Dell Inspiron 2650 laptop on boot-up consistently gives a blue screen with ERROR (0X000000ED (0X81ACA988, 0XC0000006,0X00000000,0X00000000). I have read most of your fixes BUT in my case no matter what I do it ALWAYS boots to this screen. Trying to boot to Safe Mode results in a list of drivers prefixed by ?multi(0)disk(0)rdisk(0)partition(2)c:windowsdriver.sys etc The machine will not boot from Floppy or CD and I?ve tried every combination of boot sequence under the F12 menu. In the BIOS it will not allow me to change any relevant settings, only the ?system date?, ?system time? and ?quiet boot?.and I cannot select the dropdown menu items either. Booting under Normal Startup, I see the Windows Logo and all that, but then the blue screen appears. I?ve tried removing the hard disk to get it to boot to floppy, removing the battery (which is totally dead), memory module, etc. Only thing left I think is to sling it in the Caribbean Ocean and go drink a bottle of rum.
so every time i boot the computer i get that good ol' blue screen of death right where windows should open to my desktop.. instead it says "welcome" with the light blue background.. the screen goes black and then comes back with the blue screen.. the message on the screen says:
stop: 0x0000007a (0xe16dac70, 0xc0000185, 0xbf985c66, 0x20e18860) win32k.sys - address bf985c66 base at bf800000, datestamp 41107f7a
beginning dump of physical memory dumping physical memory to disk: and counts up to 100 then the computer restarts. i was able to get into safe mode to try a system restore but when the computer restarted it never finished the install (it actually gave me the confirmation that the restore was successful while i was doing a repair install later on) i have tried going through the windows install disc repair utility and doing a chkdsk /p and a chkdsk /r upon doing /r it froze at 53 percent and did not move (i left it for a good 4 hours the first time before restarting it.. and then over night the second time.. and both times it never passed 53 percent............
I had the problem with the infinite reboot cycle. I fixed that by just clearing out my whole hard drive, in other words full restore. But now the problem is, I can't find my LAN in my network connections. The only thing it shows is MSN and I dont use that. I use a router with all wires and I share the internet with me and my dad. Its modem to router to my computer and my dads computer. So i go to device manager and what do you know? I also cant find my network adapter option in it.
My laptop has started to freeze at times,then the screen would blackout then appear with a black screen with a blue box inthe middle giving BOOT DEVICE OPTIONS Hard Disk Drive, CD-ROM/DVD, Floppy Disk Drive, LAN Boot it froze blacked out and now keeps going to this option page ,where as before if you turn off then on it rectified itself.
when I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : windowssystem32configsystem."
You can attempt to repair this file by putting the winxp cd in etc...
Now when i turn on my computer there is just a black screen showing, with nothing at all on it.
I have a celeron/p4 machine with 256 RAM and 160 G Hard Disk. Well i installed a service pack 2 for xp. After installing my screen freezed so i restarted the pc and I got a blue screen. What can i do please?
