I download Windows XP fine and then i install the 17 critcal updates. I install all my drivers and then i go to restart my computer and the blue screen pops up saying this error message STOP: 0x0000007E( 0xc0000005,
0x00000000, 0xf79f70c0, 0xf79f6dbc). Is it a BIOS problem? snd i have repeated the process above several times only to find the same error. SP1 runs fine. Sp2 wont boot after i install
my inlaws have a gateway with XP media on it. they told me that the machine said it was updating and going to reboot. after that it never rebooted. when they turned it on they got a reboot loop going. when i looked at the error msg it was the 7e stop error. with nothing else i did a search but just could not find anything like this. i can not boot into safe mode or normal mode. i have done a chkdsk /r /p several times but still no go. i have taken the HDD and was able to clone it with acronis to a larger drive. i put the HDD in a different pc and same thing.
View 8 Replies View RelatedI have the stop error message as above, but can't find out how to resolve as i don't have a cd-rom drive on my mini dell
View 1 Replies View RelatedHow do you fix BSOD and Stop 0x0000007E error?
View 1 Replies View RelatedMy computer started to crash a bunch, so I reloaded windows. Now it does it all the time. It reboots randomly and does not record anything in the error log. It did however just give me a stop error. The error was 0x0000007E (0xC00001D, 0x804FFDB7, 0xF789E678, 0xF789E374)
View 2 Replies View RelatedI have a XP laptop and when I turn it on, after I login it kicks me out and gives me a Error in the the BIOS sreen,,, Anyways, the Error code is "Stop: 0x0000007e (0xc0000005, 0x00000000, 0xf79817c8, 0xf79814c4)"
View 7 Replies View RelatedI put everything together, went into bios, changed the time. Made sure everything else was alright, (boot order basically) then put in my XP disc (that ive used for computers before) and restarted. It recognized it, went to the windows blue screen where it tried to load everything. Loaded everything (at the bottom in the gray bar) then the last thing it says is "Starting Windows Setup" (or something close to that) the screen flickers and up comes a blue screen saying "A problem has been detected and windows has been shut down to prevent damage to your computer. If is the fi."
Then Technical Information:
*** STOP: 0x0000007e (0xC0000005, 0xF78E0BF, 0xF78DA208, 0xF78D9F08)
*** pci.sys - Address F748E0BF base at F7487000 DateStamp 3b7d855c
At the moment i am completely lost, my only thought was to take out the video card and see if that helped (since it said something about video drivers) but everything is brand new, and plugged in correctly (i believe) so i dont understand what is going on!?
I have been trying to fix this problem for about three days now, and I am at the end of my rope. I was installing the Kodak EasyShare Software and when it was almost finished, my PC restarted. I disabled the automatic restart and received the BSOD with the above mentioned stop code. I have rolled back all of my drivers and reupdated them. I have installed new drivers for my chipsets on my motherboard. I can go into Safe Mode with networking with no problems. But as soon as I start Windows normally I get the BSOD. I don't see anything in my startup folders either. I have ran a HiJack this file and found nothing either.
View 7 Replies View Relatedtoshiba laptop keeps rebooting i have a toshiba satellite a100/a105 series laptop. it was working fine until i hit a link from a Internet video. i try to log on but it keeps rebooting indicating the following message:"we apologize for the inconvenience, but windows did not start successfully. a recent hardware or software change might have caused this.if your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose last known good configuration to revert to the most recent settings that worked.if a previous startup attempt was interrupted due to a power failure or because the power or reset button was pressed , or if you aren't sure what cuased the problem, choose start windows normally.
View 6 Replies View RelatedI get to screen that says 'press enter to setup windows xp' or something like that I press enter and get stop message caused by file ntfs.sys
PAGE_FAULT_IN_NONPAGED_AREA STOP: 0x0000005(0xE10AD000,0x00000001,0xF80c0413,0x00000001)ntfs.sys - Address F80c0413 base at F8083000, Datestamp 3d6desc1
I'm having some issues with my computer at the moment. It seems whenever I load an application from a CD/DVD, be it a game, installing or playing, or anything else, upon attempting to eject it after I'm finished, I get either:
A) the inability to open the disc tray again,
B) my computer restarts itself
or C) the computer shuts off, and i receive a BSOD stop error : 0x0000007E.
I report to microsoft every time, but so far to no avail. My graphics card burned out recently, and ever since, be it with my integrated adapter, or new graphics card, i have the formerly mentioned issues. I have reset the drivers, reinstalled them several times, checked the firmware of my optical drive, and checked my hdd for viruses, aswell as cleaning up my registry, but still i havent been able to solve the problem.
I have installed a new h/d which my bios has reconized and went to install a new''? windows xp pro. 2 build 2000. xp2. cd loads and installs drivers, but stops and gives stop win 32 /dll. now i have no way of installing xp. the xp disc is a genuine one from m/soft .i have checked bios (asus motherboard) seems ok.Ihave an old ibm computer which I am now using to connect to the internet. to contact yourselves.
View 14 Replies View RelatedThis is similar to the problem B1177 posted about, but I'm having no luck solving it myself. Basically, I have an IDE CDROM into the mobo, and a SATA HDD hooked to a Koutech Initio-chipset SATA controller card. In the card's setup at boot, it says the drive is "passthrough". I confess I'm not sure what that means. I'm new to SATA. I slipstreamed the Inic1620 drivers into a new CD with nLite, which stopped the "Setup cannot find any hard drives..." error, and allowed Setup to continue. After loading files, however, on restart I get the ever popular STOP 7B BSOD. Windows DOES begin to start, and the splash screen shows for a second or so, then it's into the ol' freezerino. Email to Koutech support has gone unanswered.
The machine is a Gigabyte 6IEML/P3900/500MB with an Intel 82815/801B chipset. I also tried restoring an image from another machine with an Intel chipset--though not the same one--and it stops at mup.sys, but that may have nothing to do with the SATA card. Interestingly, although Windows Setup couldn't find the drive, a Hiren's CD, with no SATA drivers loaded, could. Actually, a bit more than interesting isn't it?
All new system Asus MB core i7 4 gig ram with sata drive. All hardware is up in the bios and recognized. I get the Stop:0X0000007B on install of XP pro service pack 2.
View 2 Replies View RelatedI use earthlink DSL and the offered a clean up system for free (PC finetune) so I tried it because my computer was a little slow. Well, after installing and rebooting up dates came up. I let in automatically install updates. I know 'stupid'. I now have it set to notify me before installing. Anyway, one of the updates was some version on windows explorer. It is always attempting to Install. It doesn't say what what it is installing. I look on the internet and one told me how to find out what it is attempting to install. It came back as "3.1.400.5512" I'm think that is internet explorer 3.1 not sure. It slows my computer, won't let me go online because it interfers with the sign on window pop up.
View 10 Replies View RelatedI keep getting this stop error on windows boot that says IRQL_NOT_LESS_OR_EQUAL. From what I can find on the net its a driver that is causing this. I'd like to find what driver so I can fix it. Every now and then the machine boots so I can actually use the computer. I just need a way of identifying which driver it is.
View 1 Replies View RelatedI have a Acer Aspire AM5640-E5520A Intel Pentium 2 QUAD, 2.4GHz with a MCP73PV motherboard and SATA drive. When I try to install XP (which I like better than Vista) the set up acts ok ,loading files, until it gets to "setup is starting windows".. Then I get the BSOD and a message saying STOP:0x0000007b. I have tried to change the bios setting for the HD to IDE but I do not find anything about storage or AHCI. All i see is a place to change raid configuration. Raid is disabled. But i have tried it with raid being enabled.
View 3 Replies View Relatedi want to instal a sound card (USB) and when i plug it in XP installs drivers on its own i want to use the CD drivers. there was an option "have disk" cant find it
View 4 Replies View RelatedI have a HP laptop that once ran on Vista. This summer before I left for college,I decided that it was finally time to downgrade to XP,seeing as I had backed up everything, and classes would be starting in a week.So I did the usual thing. Insert CD, restart computer,"A problem has been detected, and Windows has shut down...."Blue Screen of Death. The Stop Message: 0x0000007B (0xF78D254, 0x00000034,0x00000000,0x00000000)
View 7 Replies View RelatedI have just run the re-installation disk for my friend's dell pc. It is running fine now except I get the duel boot menu with both choices are the same (windows xp home) then have to wait for the 30sec time out before it selects the top choice
View 1 Replies View RelatedHas anyone got an idea of how i can permanently stop TSR's (systems started processes) from starting on system boot? System is XP
View 2 Replies View RelatedI plugged my blackeberry into my computer - it has a new battery, though I don't know why that made a difference - and my computer crashed immediately. After the intel screen it brought me to a black screen with choice to reboot in safe mode, etc. No matter what option I chose, I was unsuccessful - just kept coming back to that screen. After troubleshooting I found my way to the blue screen with the error message stop: 0x00000024 (0x00190203, 0x8AFFA800, 0xc0000102, 0x00000000) and that I should disable virus protection etc. I inserted my xp disc but don't know how to get the system to boot from that.
View 14 Replies View RelatedI have 4 or 5 year old Win XP Home Tiny desktop computer which is having trouble booting. Basically when booting up, right before the Win XP logo it reboots itself.I have disconnected all IDE devices except for the master hard drive (plus disabled them in BIOS), I have tried a different hard drive in the machine that I know is working and has XP Pro installed. The same thing happens with this hard drive - reboots. This hard drive also has Ubuntu installed, and the machine happily boots Ubuntu to the normak desktop, but for some reason won't boot XP!Also tried a third hard drive in this machine that is working with Win 2000 installed, again the same thing happens.
Next I tried the original hard drive in a working seperate machine which produces the same result again.Also tried removing the RAM from the original machine and inserting a stick of working RAM from my other machine which again makes no difference.All hard drives I've tried have the correct jumper setting (primary master).
Also tried putting the Win XP disc in the drive and booting to that, I get to the menu and try to do a repair (R), but a few seconds after the repair begins the system reboots (this is using the original hard drive).Also tried booting into safe mode, and last known good config on all drivers.The hard drive is being detected in POST and in the BIOS which I have set as the first (and only) boot device.When I turn off the auto reboot upon fatal error, I can see the blue screen of death with error code 'Stop 0x0000007B'.So looks like the hard drive might be knackered, but there must be something else aswell because my two other working hard drives don't boot XP (only ubuntu)
In trying to get rid of some adware, I attempted to boot my computer (P4 2.8 GHz, 1.5 GB Ram, Windows XP SP2) in safe mode. When I selected "Safe Mode with Networking", I was brought to a blue screen called a "STOP ERROR SCREEN" - basically it said that it had to stop the booting up of the computer or the computer might be harmed. It suggested removing any recently installed hardware and disabling BIOS memory options such as caching or shadowing. So I rebooted and got into windows normally just fine.
Then I decided to try just regular Safe Mode (without networking) - when I selected that option, the computer started to do it, then rebooted and prompted me if I wanted to boot into Windows normally or safe mode, etc...I tried Safe Mode again - same thing, a reboot. I tried Safe Mode with Networking again - and I got the blue Stop Error Screen again.
This is pretty strange (at least I've never seen it) and I'd really like to be able to boot into safe mode.
I have a problem J, I cant get XP to boot up. My pc blue screens mid way through the loading windows screen and then re-sets. I had a GPU hardware failure, after windows automatic installed some software a month or so ago (not sure what it installed as I wasnt using the pc at the time). My pc would not post and the mbos gave a GPU beep error message. I have just brought a new GPU and now I can get to the pc to part load. Tried using my recovery cd, but that only gets half way and then blue screens with a STOP 0x000000c2 error. I think its a driver issue but as Im unable to get into the recovery to troubleshoot further, im not sure what I can do. The only thing I can do is rig up my pc hd to my laptop as a slave, does anyone know any software that can check an OS that not being used on a hd? Is there anything else I can try? I have flashed the BIOS to the latest version.
View 2 Replies View RelatedAs in the title, im faced with a permanent 7B BSOD stop error message on my pavillion laptop. My current knowledge indicates that is a boot loader error, and as you may naturally expect, i am desperate to fix it! I have tried using the advanced startup options to use the last configurations which worked and safe mode, but i get the same BSOD stop error. I placed my hard disk in another laptop and it boots fine, i have even been able to log in and use it as normal. However, when i put a hard disk running a perfectly fine copy of windows xp home to my pavillion laptop, i get the same 7B stop error.
My pavillion refuses to boot from CDs as well. It seems to me the problem isnt with my hard disk and the OS version on it, but with the remaining components on my laptop...but what could be the criminal? Would anyone be able to shed some light on my problem? Of course, I will provide more details as requested.
I cannot boot to Safe Mode. Using F8 at logo display, I can select Safe Mode, but never get there. Using F12 at logo display, I can boot to Utility Partition to run Express, Extended and Symptom Tree diagnostics which include Cache, Interrupt Controller, System Memory, and HD tests WHICH ALL PASS!! The BSOD error message is: A problem has been detected and Windows has been shut down to prevent damage to your computer. Error info: Stop: 0x0000008E 0xC0000005 0xBF89066B 0xF3F5CAF0 0x00000000 Win32k.sys ADDR BF89066B base at BF800000 DateStamp 3f1487db The OS is Windows XP SP1a. Only the CPU and Monitor are connected.
View 14 Replies View RelatedWindows XP, when I try to boot the blue screen of death shows up and it is written Stop c00013 USER32.dll is missing
View 5 Replies View RelatedOn my desktop I had partitioned the main Hard Disk into 2 and had XP Pro on one half and Windows 7 on the other.When I used to boot up the PC the windows boot menu came up asking if I wanted to boot to XP or 7.Soon afetr this XP started crashing a lot. So I decided to scrap 7 and I've re-partitioned the Hard Disk into one big lump with only XP remaining.The partition that had 7 on it no longer exists.Why does my PC still start with the windows boot menu when I start it up?It still asks me if I want to boot to windows 7 or an earlier version of windows?Is there a way of stopping this?
View 12 Replies View RelatedI booted up my computer and got an error message saying "STOP: C0000218 {Registry File Failure} The registry cannot load the hive (file):System RootSystem32ConfigDEFAULT or its log or alternate. It is corrupt, absent, or not writable" I tried rebooting in safe mode, to no avail. Now I can't even get it to come back to the other "STOP" error screen because every time I boot up my computer a window pops up labeled "Dell PC Restore by Symantec" and states The Dell system recovery tool has detected an unsupported change in your master boot record. The tool cannot run at this time."
I'm having a problem with my system. I've narrowed down the problem, to one of my storage drives. It has 2 partitions, E & F. I have 3 AT100 IDE HD's(One XP Boot drive, & Two Storage Drives). And a CDRW/DVD Combo Drive. Everything was working fine when they were all mounted on the Primary & Secondary IDE Controller. I tried to defrag one of the partitions of E&F Drive,...and Disk Defrag locked up shortly after it started. I had to End Task,...and eventually it stopped. Thought nothing of it,...and proceded to try and mount that drive on the Via Raid Controller on my mobo. It Can be used as Non-Raid IDE Controller. Then I found that windows xp would only boot if I disabled the Via Controller. When the Via Controller was Enabled,...I would get Stop 0x00000024 Error BSOD. This is the controller that the problematic HD was mounted to.
When I try to boot in Safe Mode,..I get Stop 0x00000050 Error BSOD. So I then booted from XP Home CD, and went into Recovery Console. I did CHKDSK /r/p on all drives. The E&F Drive would get this error; "One or more Unrecoverable Parts found". Or something like that. Is there anything else I can try to get my HD to work without formatting? Just to clarify,...This is NOT the HD with XP installed. It is an extra Storage Drive. And everything was working perfectly fine untill Disk Defrag locked up. And I tried mounting that drive on a different IDE Controller embedded in my mobo.