I am trying to install xp pro on a laptop. The laptop is a gateway M465-E, with a centrino duo cpu. I'm using a usb A: drive to install the sata drivers for it by hitting F6 at start of install. This works fine and reformat and start of install work great. But then the installation hangs at 34 minutes remaining. I realize this is a known issue with XP. what hardware to disconnect in order to get a clean install.
View 5 Replies
seems like with every new update done to Windows XP Home (SP2 + all current updates), I develop a new little annoyance.A few updates back, I noticed that when I change file associations to a specific program opening up my .jpgs, .tifs, and .gifs, from the default (Windows Picture & Fax Viewer), the newly-associated file does open the file, but the icons for those files remains as the default Windows Picture & Fax Viewer.(I suspect at the bottom of many of problems MAY be the installation of my Lexmark printer -- but then, it's a convenient scapegoat for everything!
View 8 Replies View RelatedWhen I turn on my computer the green light will come on for a second and go right back out. The fans keep running and the cd drives will open and close, but the monitor screen remains black and it tells me no signal.
View 1 Replies View RelatedI want to be able to make my pci internal modem (com3) dial a phone number and remain connected when i close the dos window then open a program that will talk directly to com3.Closest i can come is "echo atdt >com3" When i tried "echo adt0,12345 > com3" still no dial tone or off hook operation just a click.
View 4 Replies View RelatedHP pavilion a1210n XP service sp3 Does not stay in standby mode for more than 1 minute. Removed batteries from mouse so it did not affect standbby mode.
View 2 Replies View RelatedI have 3 print queues that are retaining the printed jobs in the queue and every now and again the damn thing prints all the job again. I have checked that the keep printed jobs button is NOT checked/selected, but the queue acts ilke it is selected to keep printed jobs. I have 125 printer queues and only 3 act like this and they are set up identical to the others. I have reconfigured this twice on all 3 and they still act like they are set to keep printed jobs in the queue.Anyone seen this and know of a solution, on the Microsoft site I am seeing posts but not a single reply about how to either run a job to clear them out a couple times a day or fix this so they act as configured. To NOT keep printed jobs in the queue.
View 5 Replies View RelatedI have noticed that sometimes when I look at the task manager that there are programs there that I have terminated. For the most part they are not using CPU time, but are still on the list. The exception is iexplore.exe which is using 50% of CPU time (dual core machine) and causing the system to become unresponsive. I have tried using the right click, terminate process on these entries and nothing happens. They still remain in the list.
I have tried to restart computer and it will not restart. It goes through some motions of attempting to end unresponsive programs, but then nothing happens. The only way out is to hold down the power button until the computer shuts off which is supposed to be a bad way to turn it off.
Sometime after downloading a recent Microsoft (Automatic) Update, I now find the Outlook and Word Programs remaining resident in memory after using Outlook (memory as viewed via Windows Task Manager). Sometimes, the programs gobble-up as much as 150K of RAM. I have 1.0 Gb of RAM on the machine. I find that I now routinely approach the 1.0 Gb threshold. And while this has not been a real problem in terms of system resources or performance, I find little reason to leave these programs resident in memory. I'm at a loss for how to keep these programs from commandeering a full-time presence in RAM. How to I prevent these programs from remaining resident in memory? I've combed through the configuration settings within each program, but with no clue as to user-control for this behavior.
View 1 Replies View RelatedI dont know if i've got this in the right forum but i've got a WinXP Pro Machine so thought i'd try it here.The problem is that my print queue seems to retain the print jobs although the print jobs have already been printed out (i've seen it retain jobs from 5 days ago). I happens from all sorts of programs.My PC is acting a print server (ie, the printer is connected to my PC via Parallel and i have shared my install of this printer).In the print queue, the status indicates "sent to printer" and Pages "x/x - eg 3/3" however the print jobs remains in the queue and do not disappear unless i manually do a "cancel". If i were to turn off and then on the PC, all these print jobs will print out again without any user interaction.So, can anyone tell me if this is a driver issue or is it something to do with the printer or Parallel port configuration.As far as i know, i've got "bi-directional support" selected but i'm still to find out what modes i've got parallel set to eg. EPP or ECP or both.
View 7 Replies View RelatedIf I do manage to exchange my faulty WINXP computer for a new one at Staples, what about all my personal info on that faulty computer?
Do I just hand over my old computer with everything still on it (I can't get
into it to delete my personal files and Pictures).
When I close a program the desktop icon remains highlighted, until I mouse click elsewhere on the desktop. This only presents a real problem when I log off of my dial up server and the icon remains highlighted. If I forget to un-highlight it, my phone won't ring, although my answering machine will pick up the call.
View 2 Replies View Relatedhaving trouble with the mobo CMOS settings and ended up rmaing the mobo and the memory. Well i got the new mobo and memory is it loads. When it goes to load XP it gets NTLDR not found or something to that degree and says press ctrl+alt+del to restart. My hd has a partial install of xp and i havent been able do the full install. Was wondering how to do the full install now. I tried popping the xp cd in and it doesnt read it, it just gives me the NTLDR message and wont do anything.
View 1 Replies View RelatedPC wont boot up any more , it says there could be a currupt or missing file , it says its config system and says it might be able to repair the file using the install disc. i have a System Recovery CD-ROM
View 1 Replies View RelatedI can't install my printer because this file is missing or not right. I tried another solution, but my RunOnce file is not missing. Can anyone help? Windows XP OS trying to install a HP D4160 printer.
View 5 Replies View RelatedI am using Windows XP Professional, service pack 1 is installed. A few days ago the PC would not boot up. I had to reinstall Win XP Pro. All my programs had to be reinstalled because Windows did not acknowledge they were there. All 23 of them work fine. Here's where I ran into a problem. I use a Matrox G200 Quad card with TV Tuner. I downloaded and installed the software for the card and that too is fine. When I download the software for the TV part of the card to work, I double click on the unzipped set up file and it starts working, that gets to the part where it says "Preparing to Install" then it just disappears. It worked before the reinstall of windows.How can i figure it out.
View 2 Replies View Relatedi am trying to install windows xp pro (sp2) on my new pc but i get this message:
"setup cannot copy the file: sprb0402.dll".
does anyone know what's going on?
hardw:
intel p4 3.0
msi intel 945p express chipset
2x1GB DDR 533 memory (dual channel mode enabled)
msi ati radeon x300HM 128mb
1x HD wd raptor
2x HD wd sata II
When I start up my computer I receive the following message:C:program1 ewdot~1 ewdot~2.dll Is this an important file? Any suggestions or solutions? Tried reinstalling windows xp but the system says I am running a newer version and won't let me install.
View 4 Replies View Relatedmy XP install started acting up and whenever it loaded the XP boot screen, my HDD light stayed on, and after a couple of minutes, my computer restarted itself. To find the problem, I started XP in safe mode, and it went to load up till a file mup.sys(?), can't remember. I re-plugged my SATA cable (I have a Samsung SpinPoint 160GB on a MSI P965 Neo-F running a Core 2 Duo E6600 at stock clocks), switched the cable, and checked that my mobo's bios was emulating the RAID device on IDE. The thing is, every other OS finds my HDD (even Win 2000!): Linux, Vista, Mac OS-X (I was desperate). I'm running openSUSE 10.2 right now, and I desperately need Windows back! My dad won't let me install Vista yet.
View 2 Replies View RelatedWindows could not start because the following file is missing or corrupt: <windows root>/system32/ntoskrnl.exe Please re-install a copy of the above file. That is the error it comes up with. It will not even boot up to Windows. There's not really much I can access with Windows not booting.
View 1 Replies View RelatedUnable to install xp Pro. I have used various drives and this is the error message: System Setup Log- (C:windowssetuperr.log) Error: Installation Failed: D:1386asms. Error message: The volume for a file has been externally altered so that the opened file is no longer valid. Fatal Error: One of the components that windows needs to continue setup could not be installed. The volume for a file has been externally altered so that the opened file is no longer valid.
View 3 Replies View RelatedI have a clean drive and trying to install XP Pro and I get near the end of the install i get an error message saying to reinstall windows rootsystem32ha1.dll. I have not found any real info on the internet other than comments about it being a common complaint.
View 9 Replies View RelatedIve been trying to install windows xp pro onto a compaq presario 5000 for the last 2 months but it doesnt want to go. i tried a flat out cd boot,
but i get an error "NTLDR file is missing" (never pressed a key when it said "Press any key to boot from cd"
I tried using the setup disks from microsoft at How to obtain Windows XP Setup boot disks
but right b4 the installation starts i get an error, "Value 0 in the setupsomethingorother file is corrupt or missing"
I tried to install windows xp pro from inside windows 2000 pro, but the stuff freezes the second i click install windows xp from the autorun menu's.
I have Pc with P.III 667 and 192 Mbit Ram and currently run in winme. I want to upgrade into window xp pro, with new installment in window xp, unfortunately, is wasn't work at all. What i had face the problem is, when copied xp files to my hard disk is have some error file occur. Is the driver problem or my pc can;t support at all.
View 7 Replies View RelatedI run Windows XP Home Edition. I have recently installed an Apache server, and have my website running from my computer, but have a few problems. I want to install vBulletin, but it requires me to change the permissions on a file from 644 to 666. I know you can do this over FTP or UNIX, but how would I do this on Windows XP?
View 4 Replies View RelatedI am running Windows XP and have tried to uninstall imesh. One of two things happens. One is that, in the add/remove programs, when i try to uninstall, it simply freezes up or...i get the "can't find install.log file" message. I redownloaded the program, but that doesn't help; nothing changes.
View 2 Replies View RelatedCan someone tell me please where can I download a reliable version of AVG anti-virus. I have downloaded it 3 times, twice from the grisoft site & once from somewhere else (can't remember now where tho) & all three times when I've gone to install it, a message comes up that there is a corrupt file. Does anyone know if there is a reason this keeps happening? Can someone tell me where I can download a version that's not going to be corrupt?
View 12 Replies View RelatedWhen trying to insall DirectX I get an error message stating "A cabinet file necessary for installation cannot be trusted. Please verify the Cryptographic Services are enables and the cabinet file certificate is valid."
View 2 Replies View RelatedSo what's my question - how can I convert my file system from FAT32 to NTFS and re-install my XP using the recovery disks?
I am trying to install Service PAck 3 and have run into the following error. Setup cannot copy the file hsfdppsp2.sys. Ensure that the location below is correct or change it and insert "Windoes XP System Files" in the drive you specify. Copy files from: c:windowssystem32drivers
View 3 Replies View RelatedI get up this morning and turn it on, it seems to boot okay, but after the Windows XP logo and the little blue loading bar it hangs at a black screen until after about five straight minutes I get fed up and power down. I tried booting in safe mode and that worked fine a minute ago, but now I am trying safe mode again and it hangs at a file called Mup.sys and will not proceed with the boot.
View 2 Replies View RelatedI try to install windows xp in my laptop, it shut down when formatting or file copping.
View 16 Replies View Related
