I can't install my printer because this file is missing or not right. I tried another solution, but my RunOnce file is not missing. Can anyone help? Windows XP OS trying to install a HP D4160 printer.
View 5 RepliesPC wont boot up any more , it says there could be a currupt or missing file , it says its config system and says it might be able to repair the file using the install disc. i have a System Recovery CD-ROM
View 1 Replies View RelatedDuring my network troubleshooting, I was checking my NIC configuration on my desktop to make sure that file and print sharing was enabled and realized that there is nothing installed, no clients, services, or protocols. When I try to install I got an error message that the file could not be found.This is strange because I get access to the internet.Is this possible?Could this be the reason my laptop cannot access the desktop? How I fix this?
View 14 Replies View RelatedI have fixed this problem in the past in repair mode and i want to do the same with this, but, there is no filename at the end of the statement see below Windows could not start because the following file is corrupt or missing windowssystem32configsystem Can this be fixed in repair mode without having to be reformated or reimaged.
View 4 Replies View RelatedWhen I start up my computer I receive the following message:C:program1 ewdot~1 ewdot~2.dll Is this an important file? Any suggestions or solutions? Tried reinstalling windows xp but the system says I am running a newer version and won't let me install.
View 4 Replies View RelatedI have a clean drive and trying to install XP Pro and I get near the end of the install i get an error message saying to reinstall windows rootsystem32ha1.dll. I have not found any real info on the internet other than comments about it being a common complaint.
View 9 Replies View RelatedIve been trying to install windows xp pro onto a compaq presario 5000 for the last 2 months but it doesnt want to go. i tried a flat out cd boot,
but i get an error "NTLDR file is missing" (never pressed a key when it said "Press any key to boot from cd"
I tried using the setup disks from microsoft at How to obtain Windows XP Setup boot disks
but right b4 the installation starts i get an error, "Value 0 in the setupsomethingorother file is corrupt or missing"
I tried to install windows xp pro from inside windows 2000 pro, but the stuff freezes the second i click install windows xp from the autorun menu's.
When I turn my laptop on I get the following message The following file is missing or corrupt - please reload the file <windows root>system32hal.dall
View 12 Replies View Relatedafter installing acrobat on my machine, I realised that my FILE print port for postscript printing had been deleted. Need help to reinstall the print port.
View 3 Replies View RelatedSo my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message....
Windows could not start because the following file is missing or corrupt:
windowssystem32configSYSTEM
Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair.
So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts.
I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
was getting a blue screen 07A was told by computer techs without looking it was either my hard drive or my operating system. Checked my hard drive several different ways and no problems. So I went to do a Windows XP repair instead of complete reinstall as they are a pain. After a long time it came back that couldn't do this because SPCMDCOM>SYS file was missing and couldn't repair from recovery console without it. My hard drive was replaced by Dell in July of 05 I think. What can I do without going to extremes? Secondly can I install my cd/dvd rom on my other Dell PC with discs I already have? I am very aggravated. I want to try to save at least 1 computer. On the 1st PC about 2 months ago I had my 17 inch flat panel go out it starts but then go black, I am using the 2nd computers screen!
View 4 Replies View Relatedthis error shows up. File is missing or corrupt: C:WinntSystem32DriversPci.sys Can I repair the file in windows or do I have to try the disk option?
View 2 Replies View RelatedI have a pc that has mine and a roomates account on it.it would not finish booting to the main Windows desktop screen.It sits at the "Windows XP Home Edition" loading screen for about 2 or so min. then goes black for another 2 min. then a little white arrow cursor comes up and the screen is still black. After 2 more min. a grey warning box appears and says the following:Isass.exe Was not able to find SAMSRV.dll file, reistall this try again..bla bla bla have a nice day.In short my pc is at this moment a 20lb door stop.I had a friend a couple years back take his old XP disc and somehow fix a simular issue.Least I thought thats what he did.I dont know his where abouts and I've seen some other forum's 3 year old thread mention how to repair the file, by reinstalling the entire Windows program.
View 1 Replies View RelatedAfter doing 'One Button Checkup' I get an error. Missing File:"CProgram FilesCommonFilesInstallShieldProfessinalRunTime701Intel 32DotNet.Installer.exe" (cannot access a necessary file "mscoree.dll") Win Doctor is unable to find & replace it, so it must have been deleted after Installation or later, ..... it doesn't seem to affect the computer so far, is it necessary to replace & would I be able to extract & replace it from original Windows XP disc, or would it only be possible by re-installing Windows XP?
View 3 Replies View RelatedSystem: XP Professional recently authenticated with MS GWA (cdrom enroute) was a ?pirated? copy
I have gone as far as I am comfortable with to locate and install the required .dll files. I authenticated the Windows XP. I downloaded 21 updates. I installed XPmedic, emailed them for support, and no response after 4 days. Below is the contents of the screen that stops the HP printer installation.
"Issues stopping installation:
slbcsp.dll (HKEY_LOCAL_MACHINESOFTWAREMicrosoftCryptographyDefaultsProviderSchlumberger)
This is a Cryptographic Service Provider manufactured by Microsoft.
sccbase.dll (HKEY_LOCAL_MACHINESOFTWAREMicrosoftCryptography|DefaultsProvider|Infineon)
This is a SICRYPT Base Smart Card CSP manufactured by Microsoft.
I am running WinXP on my Gateway pc and my Gateway Laptop. I know that printer and file sharing is an easy procedure. I have done it before and it worked. I know networking the two is a simple procedure and I did that too. My problems began when I switched from dial-up to satellite (Wildblue)internet. Don't know if that could have made a difference.Here is what I've tried so far. I first googled the problem and then took all the advise I could find, followed all the directions and nothing worked. I believe the two machines are networked because they are sharing the internet connection and when I did the 'ping' thing, each computer communicated with the other. I've done the printer sharing procedure over and over and over and when I go to the laptop, the printer on the desktop doesn't even show up. Both the pc and the laptop are on the same workgroup so that's not the problem.I
View 23 Replies View RelatedI'm battling spyware removal at the moment (aurora) and somehow my win xp sp2 search function no longer works. i get an error "A File That Is Required to Run Search Companion Cannot Be Found" you may need to run setup I went to the microsoft website and downloaded the hotfix, however it doesn't work with sp2! anybody know how to fix this? I checked and i do have the srchasst folder in windows.
View 1 Replies View RelatedWhen I installing the software for HP printer on Windows XP professional I get a message at the end = can not find the INF file.
View 4 Replies View RelatedTried to use her wireless adapter on my wireless network and ever since that day I've had printer problems. What happens when I say print is the printer icon appears in my taskbar, hangs around for about 15 seconds (as if printing is occuring) then it goes away but the printer never prints. If I open Control Panels and go to Printer, it too breifly shows one document printing for a few seconds, as if it is printing. It is as if the file has been spooled, but the spooler doesn't send the file on to the printer. My desire is to print. My question (hopefully on that road to printing): Is there a print spooler in Windows XP? Any way to monitor it other than control panel printer?
View 2 Replies View Related"Install" option is missing from the context menu for *.inf files.
Google gives many results, but all considering the same problem for Win95/98/2000, and not for XP which is my OS.
It is probably a registry problem, since it is the same case on my both computers with same software, and different hardware.
I've tried everything I knew, but can't move a bit.
I have one more problem with context menu; WinRAR "extract" options are present, but not working for *.rar files. They do work for other archives though. This is not such a big problem, but I am mentioning it beacause there is a possibility that both are connected.
I desperatly need to install an *.inf driver. No way around. I NEED to get back "INstall" option in the context menu for *.inf file drivers.
i have a dell inspiron B130 laptop with a lexmarx 4200 series all-in-one printer. when i try to scan a document to a file,it goes directly to my photo editor instead. i have tried restarting the computer and turning off the printer to no avail.
View 3 Replies View Relatedwhen I start my ms outlook 2007 I get this error. "Errors have been detected in the file 'file_path'. Quit all mail-enabled applications, and then use the Inbox Repair Tool." I tried to scan with scanpst.exe but it went in vain.I tried it with other applications it worked fine.But,the problem is they all are demo versions and I gets back only 5 to 6 mails for more mails i have to buy that applications. Do we have any free tool that can fix my problem or any other way to fix this.
View 2 Replies View RelatedRunning Disk Cleanup, when this Windows File Protection comes up saying a system file has been replaced with a unrecognized one. It wants me to put in my Operating System CD, but I don't have one. I bought this computer and the required files are already on the computer. So what should I do?
View 7 Replies View RelatedWhen double clicking the actual file, Windows reports "windows cannot find file ... <file name.exe>"
This is only SOME exe's. Particularly, older programs. Word, excel, WordPerfect all work. Older apps don't.
I've tried the exe fixes on dougknox.com site and kelly's corner XP fix.
How do i know which DLL file is missing.
View 4 Replies View RelatedI have a prob
Laptop P4 running XP Pro
Can't load Office XP because I get an error missing setup.ini file.
Ran a spyware but no help.
Any suggestions??
I have a friend running XP Home that needed to change what program a file type opened with. I had her go to Folder Options to change it but she only has the General and View tabs.Got the file type changed by right clicking and Open With but I'd like some ideas of how to get the missing tabs in Folder Options to show.
View 2 Replies View RelatedI have Office XP loaded on my PC, with added graphic filters, conversion filters and the 2007 compatibility pack loaded. Just yesterday, I tried to open a Word 2007 doc (.docx) which usually opens with the added compatibility filters. When the conversion list appeared, there were only 5 items listed, where there should have been around 20. Can't figure out where they went. I reloaded my filters and compatibility pack, but still can't open file and only get 5 items in conversion table. It almost seems as if the filters are being turned off. Any ideas? Is this a registry problem?
View 8 Replies View RelatedOn my other Windows XP, I cannot get windows to start or something.I start up the computer and I get to the log on screen and I log on.However, then a window pops up saying "wininet.dll" could not be found and explorer.exe couldn't load. Then my desktop does not show up and the start menu doesn't, and it's just my background.
View 3 Replies View RelatedI just reorganized my office. Everything was fine before but now I can't boot up to my OS (Windows xp). I get the following message and that's by itself on a black screen: Windows couldn't start because the following file is missing or corrupt. <windows root<system32hal.dll. Please reinstall.I'm using a Dell Dimension 2400. I've tried finding the file on the resource disk and in the XP installation disk. I've been online through another computer and found the dll but can't seems to install in on my Dell. I've tested everything through my resource disk and everything tests fine.
View 4 Replies View RelatedNorton WinDoctor finds a missing file "dtype32.dll" in the following Windows XP string on my PC: c:winntLastGoodDownloaded Program Filesezlisting.exe.I can't find dtype32.dll anywhere on the web and I can't find "ezlisting.exe" on my PC. Should I just tell WinDoctor to ignore it?
View 6 Replies View Related