Root Error: File Is Missing Or Corrupt/ Reload The File?
Nov 23, 2007When I turn my laptop on I get the following message The following file is missing or corrupt - please reload the file <windows root>system32hal.dall
View 12 RepliesWhen I turn my laptop on I get the following message The following file is missing or corrupt - please reload the file <windows root>system32hal.dall
View 12 RepliesI am getting the following error and it loops: "file is missing or corrupt windows root system32 hal.dll" When I try and run the windows cd and either wipe or repair the error it tells me that the "the setup did not find hard drive disks" Now I am thinking the hard drive is defective?? Or do I have a virus?
View 14 Replies View RelatedDue to lapse of sense at a particular moment on my part, my DELL Inspiron laptop was not protected when accessing the internet for a download. Windows XP is the operating system. When booting up, error message states that the following file is missing or corrupt: <Windows root>system32hal.dll Please reinstall a copy of the above file. I've tried numerous programs and software packages that "guarantee" results but none have accomplished anything except wasting my time and money.
View 1 Replies View RelatedI have an old computer with an Intel Celeron 467 MHz processor, 128 ram and I'm running Windows XP SP2. Earlier this week I came to turn on my computer, and could not log on to Windows. "Windows could not start because the follwing file is missing or corrupt Windowssystem32configsystem." I reinstalled XP. I couln't access the repair install. Then I thought maybe someone had gotten into my computer and I downloaded Zone Alarm...Big mistake. Since then my computer freezes, programs jam, I keep losing my internet connection,(DSL) and I get "cannot find server" messages. Its also slower as molasses in winter. A little better since the removal. Obviously Zone Alarm was removed and i went back to Windows firewall. I also use Ad-Aware, AVG, Spybot Search and Destroy, Spyware Blaster and I use Registry Mechanic and TuneUp Utilities.
View 14 Replies View Relatedwhenever I boot the system, I come up with the following message: Windows could not start because the following file is missing or corrupt: <Windows root>system32 toskrnl.exe re-install a copy of the above file. every time I try to boot the CD, the same error message occurs. I've already tried to change the boot order so the CD-ROM drive would be first. I have also selected the CD-ROM drive to be the boot device, but the message always pops up.
View 3 Replies View RelatedI have a desktop pc with XP Home Edition. It's an HP and it looks like there are two operating systems on it. One is the regular XP Home Edition load and the other seems to be the Recovery one if you run the Recovery utility that HP offers at boot up. I'm not sure what to do to fix this. If I try to run the recovery from HP it says that some data might be lost which I do not want. Is there any way to fix this hal.dll file using some type of utility disk? Or any other way?
View 3 Replies View RelatedI have fixed this problem in the past in repair mode and i want to do the same with this, but, there is no filename at the end of the statement see below Windows could not start because the following file is corrupt or missing windowssystem32configsystem Can this be fixed in repair mode without having to be reformated or reimaged.
View 4 Replies View Relatedwhat i would like is a step by step of how to repair this problem i have tryed copying this file from the xp disk to copy ntoskrnl.exe as follows e:where e is my cd drive e: copy e:i386toskrnl.exe c:windowssystem32 and it tells me file cant be found but when i do a dir e:i386 it gives me the file.
View 1 Replies View RelatedGet message "Cann't find import;dll may be missing, corrupt or wrong version file "RTL70.BPL", error 126. Trouble shooting steps taken - 1. Turned off System Restore, 2. Ran Disk Clean Up, 3. Ran CW Shredder, 4. Ran Ad-Ware, 5. Ran Spyware (Spy-bolt, Microsoft Antispyware), 6. Ran AVG Antivirus, 7. Rebooted in the Safe Mode, 8. Reran steps 2-6, 9. Rebooted in the Normal Mode, 10. Turned System Restore back on. Still get warning message.
View 1 Replies View Relatedthis error shows up. File is missing or corrupt: C:WinntSystem32DriversPci.sys Can I repair the file in windows or do I have to try the disk option?
View 2 Replies View RelatedSo my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message....
Windows could not start because the following file is missing or corrupt:
windowssystem32configSYSTEM
Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair.
So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts.
I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
PC apparently crashed while I was gone. Black screen, says need to reload missing or corrupt hal.dll Cannot reboot into safe mode, no last known good point to return to. This is the only screen I can get, other than setup for bios - which can still see the hard drive and installed peripherals. Don't have a floppy drive,
although I'll be getting one soon, in order to try a boot to that.
All of a sudden I cannot boot up my Toshiba laptop (2.3mhz pent4, 512 RAM, Windows XP Home with SP2). I get the error message "Windows XP could not start because the following file is missing or corrupt:C:windowssystem32configsystem".By hitting the F8 key when starting I can get the start menu and I've tried booting into safe mode and I've tried "boot using last known good configuration" - but still get the same error message.
View 8 Replies View RelatedPC wont boot up any more , it says there could be a currupt or missing file , it says its config system and says it might be able to repair the file using the install disc. i have a System Recovery CD-ROM
View 1 Replies View RelatedBut anyways i'm major computer problems. I have a Windows xp Compaq computer and im getting an error that says
<Windows root>system32hal.dll. is missing or corrupt.
Please install a copy of this file.
so i dont have that file and i was wondering whats wrong and what to do?
how can solve this problem please tell me.can i use any free softwere to solve this problem.
View 2 Replies View Relatedwhen I start my ms outlook 2007 I get this error. "Errors have been detected in the file 'file_path'. Quit all mail-enabled applications, and then use the Inbox Repair Tool." I tried to scan with scanpst.exe but it went in vain.I tried it with other applications it worked fine.But,the problem is they all are demo versions and I gets back only 5 to 6 mails for more mails i have to buy that applications. Do we have any free tool that can fix my problem or any other way to fix this.
View 2 Replies View Relatedhow to fix dell computer window root system32 ntoskrnl exe missing or corrupt
View 1 Replies View RelatedI just boot up my computer and a black screen (which i've seen before and has only led to re-install XP) came up saying the following file is missing or corrupt: /system/ntfs32(I don't recall the exact file name - next time I will write it down). But i'm sure many have experience with this.Now somehow I was still able to enter Windows after reboot and F8 (never happened before - i've always had to re-install). What can I do NOW to prevent this next time from happening and perhaps (almost certain actually) having to re-install Windows XP? Can I get that file from somwhere? Am I missing a service Pack? I have SP2 for Windows XP Professional version 2002. (I double checked My Computer>Properties).
View 8 Replies View RelatedWhen trying to turn on my computer i get the following message: Windows could not start because the following file is missing or corrupt: Windowssystem32configsystem You can attempts top repair this file by starting Windows Setup using the original Setup CD-ROM Select 'r' at the first screen to start repair. i have done endless searches on my desktop to try to find a step by step out of this problem. i have followed such things as: >>Problem: You turn off your computer one day and then go to restart to find an error message that says: Windows could not start because the following file is missing or corrupt C:windowssystem32configsystem You can attempt to repair this file by starting windows setup using the original setup CD-Rom. Select "r" at the first screen to start repair.
View 14 Replies View RelatedWinows says file windowssystems32configsystem is corrupt or missing. It says that I can attempt repair using the original setup CD Rom and typing "R" at the first screen. I have an Emachine 4160. It was loaded at time of purchase and only recovery disc were supplied. I can reboot with the recovery disc but " how can I save my pictures "? Attempts to enter safe mode have been unsuccessful.
View 2 Replies View RelatedI shut down my laptop before I left last night and when I hope, my system didnt shut down all the way and there was a blue screen saying an error had occurred and if this was the first time I had seen the message to shut the ocmputer down and restart it.I did as instructed. When I powered it back up, I recieved a message saying Windows could not start because the following file is missing or corrupt:<Windows root"system32
toskrnl.exe. Please reinstall a copy of the above file.The problem is, I don't have the XP cd as my laptop came pre-installed. A friend suggested I go into the safe mode and do a system restore to the last saved date.
I have a big problem. My CFOs computer has been messed up with the uninstallation of Norton. The computer will not boot after trying to run Autocheck (file is missing or corrupt) and the gives an error. I tried to use the Windows XP disc and the setup sees the partition but cannot recognise the format.Unfortunatley I don't know any commands in command line / repair console. Does anyone know commands to get the machine to run checks / get the machine to install XP? Formatting is the last option as there are some data on the machine that is not backed up.
View 2 Replies View RelatedLast night while watching the news, my computer rebooted all on it's own way over on the other side of the room and now I have the following error message. Windows could not start because the folowing file is missing or corrupt System32/drivers/ntfs.sys. I will boot up if I try several times but even after doing a system restore I get the same message plus sometimes I get Windows could not start because the folowing file is missing or corrupt System32/drivers/pci.sys
View 10 Replies View RelatedI have been getting Norton (Corporate, installed by someone else) notificatons for a few weeks about a Trojan (cache.cachekit) and Norton could not get rid of it. Now I cant boot up and it tells me my file(System32/system/config) is missing or corrupt. I was thinking it was my Trojan I couldnt get rid of, what do you think? Also, my OS was installed by someone else so I didnt have my own disk, however I have ordered one and it should come in a week. If it is my elusive Trojan, for one, how do I get rid of it for good, and also, when I get my disk I dont know exactly what to do to fix the computer. I cant bring it up in safemode either. I have never installed a OS, but I have installed other software-on a properly functoning computer that is. Do I absolutely have to wipe my hardrive clean, and if so, how do I do it?
View 2 Replies View RelatedMy hard drive crashed on my laptop. I had a running dual boot environment of Win2K and XP. Both the Win2K and XP were backed up with Acronis Ver11. After replacing the hard drive I created the partitions needed for Win2K and XP using a Win2K CD. Formatted and installed Win2k on the first partition. Did a restore of Win2K via Acronics. I used the restore because of the other software I had installed/running on the first partition (Win2K). The XP/OS application I have needs three partitions. The three were created by the Win2K CD and then formatted via Disk Management (Win2K). Next I restored my XP/OS via Acronics on the second partition. Modified the Boot.ini file for both Win2K and XP. The Win2K boots no problem. Selecting XP I get the following error: Missing or corrupt file Windows system32 configsystemd. I did copy in the NTldr and NTDetect from the i386 folder (XP CD), to the XP OS no change.
View 3 Replies View RelatedWell, I woke up this morning to turn on my computer, and I got an error like this. "windows could not start because the following file is missing or corrupt: windowssystem32configsystem. You can try repairing by using the original windows xp setup cd, press r on the first screen." Well, after scrounging for the xp cd, I put it in and booted from the cd, tried to do a repair install, but the repair option was not available. I could only install another copy of xp (onto the current copy) which I didn't want to do if it means that all my data is lost (I really don't want to lose them again!).I exited and googled up on why repair was not an option (I'm using my laptop btw), and some random dude told another guy with a similar problem to do chkdsk and bootcfg in recovery console. I went into recovery console and kind of played around with bootcfg, and I used the /rebuild function thinking it was repair, and then it asked me to type something and I was confused, so i entered "n" (for no). Well, basically now when I restart I have the option of booting up "Xp Home Edition" or "n", both of which lead to the missing file message, but how did I make two windows? And can I get rid of this "n" windows I made?
View 11 Replies View RelatedIt worked fine for a few days, then I got this blue screen that said I have a system error and that I am missing a file or it is corrupt c:windowssystem32configsystem.Now, this was fine because I thought I knew the answer to this problem, which is incidentally the answer to another recent problem posted on this board, it can be found here:URL...I performed the operation, and again, it was all well and good for a few days.Then I got the same problem again. I used the same solution to make a fix.Then it happened again.So, my question is what's the problem? Do I have a hardware problem? I even used two different WinXp install discs to solve this problem on different occasions since I only needed the recovery console and I thought that the original disc might have become damaged or something.
View 13 Replies View RelatedWhen I started up my computer yesterday it said I had a missing or corrupt file and I needed to reinstall windows. So I put my disk in and it said loading files then it said setup is starting windows and then it said loading files. It kept doing this over and over and over. So I took the CD out and tried starting the computer. I got a disk read error. This is where I am now.
View 14 Replies View RelatedI have encountered another problem!
Ok, so, my computer wouldn't boot up right? I had to repair the installation etc and activate Windows, which I did today. The just recently, I was in safe mode trying to fix the PC, and then it restarted, and now everytime I try to start it up, it says,
The file Windows...../config/SYSTEM is missing or corrupt and it says I have to repair Windows, using the disk.
While formatting my system i am facing a problem. the system is showing the following problem.
Windows could not start because the following file is missing or corrupt:
<windos root>system32dal.dll.Please re install a copy of above file