Could Not Start Because The File Is Missing Or Corrupt
Sep 21, 2009
I shut down my laptop before I left last night and when I hope, my system didnt shut down all the way and there was a blue screen saying an error had occurred and if this was the first time I had seen the message to shut the ocmputer down and restart it.I did as instructed. When I powered it back up, I recieved a message saying Windows could not start because the following file is missing or corrupt:<Windows root"system32
toskrnl.exe. Please reinstall a copy of the above file.The problem is, I don't have the XP cd as my laptop came pre-installed. A friend suggested I go into the safe mode and do a system restore to the last saved date.
So my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message.... Windows could not start because the following file is missing or corrupt: windowssystem32configSYSTEM Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair. So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts. I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
I have fixed this problem in the past in repair mode and i want to do the same with this, but, there is no filename at the end of the statement see below Windows could not start because the following file is corrupt or missing windowssystem32configsystem Can this be fixed in repair mode without having to be reformated or reimaged.
When trying to turn on my computer i get the following message: Windows could not start because the following file is missing or corrupt: Windowssystem32configsystem You can attempts top repair this file by starting Windows Setup using the original Setup CD-ROM Select 'r' at the first screen to start repair. i have done endless searches on my desktop to try to find a step by step out of this problem. i have followed such things as: >>Problem: You turn off your computer one day and then go to restart to find an error message that says: Windows could not start because the following file is missing or corrupt C:windowssystem32configsystem You can attempt to repair this file by starting windows setup using the original setup CD-Rom. Select "r" at the first screen to start repair.
Well, I woke up this morning to turn on my computer, and I got an error like this. "windows could not start because the following file is missing or corrupt: windowssystem32configsystem. You can try repairing by using the original windows xp setup cd, press r on the first screen." Well, after scrounging for the xp cd, I put it in and booted from the cd, tried to do a repair install, but the repair option was not available. I could only install another copy of xp (onto the current copy) which I didn't want to do if it means that all my data is lost (I really don't want to lose them again!).I exited and googled up on why repair was not an option (I'm using my laptop btw), and some random dude told another guy with a similar problem to do chkdsk and bootcfg in recovery console. I went into recovery console and kind of played around with bootcfg, and I used the /rebuild function thinking it was repair, and then it asked me to type something and I was confused, so i entered "n" (for no). Well, basically now when I restart I have the option of booting up "Xp Home Edition" or "n", both of which lead to the missing file message, but how did I make two windows? And can I get rid of this "n" windows I made?
I have a workstation running XP Pro that displays the following error message.Windows could not start because the following file is missing or corrupt.Windows rootsystem32hal.dll. Please re-install a copy of the above file.I did get the machine to at least prompt me for OS choice, yet Windows 2000 Professional was the only OS option listed..
Computer is packed with spy-ware and viruses. I've been trying to clean it up and now I'm getting this message on start up. What should I do. The computer won't even start up. He is running a bootleg version of windows. And his setup disk doesn't seem to help. Windows could not start because the following file is either missing or corrupt. windowssystem32configsystem, You can attempt to repair this file by running windows setup using the originally setup CD-ROM. Select "r" at the first screen to start repair.
XP PRO SP2- Recieve the following message upon unsuccessful boot attempt. "WINDOWS COULD NOT START BECAUSE THE FOLLOWING FILE IS MISSING OR CORRUPT: <WINDOWS ROOT> SYSTEM32HAL.DLL (not yelling ) I have tried to boot from my xp pro cd to utilize the recover utility however the computer will not boot from the cd. I able to use a dos boot disk however my keyboard is USB and I cannot find USB drivers to work under dos, so I was unable to do anything at that point. It was my hope that I could work through dos to edit the boot.ini file.
I do not want to reinstall windows. If I have to I will place the hard drive in another computer as a slave and work on it that way but I'd rather not. The only other tower type computer I have other then laptops is running xp home SP2.
I have been searching for how to fix my son's computer which comes up with windows system32 config system - Windows could not start b/c the following file is missing or corrupt. He has a Dell and everything I've read seems to give warnings about doing recovery with a Dell. There was no OS CD with it.
I restarted my computer after installing an update to my firewall program. I get the "windows could not start because the following file is missing or corrupt: WindowsSystem32Hal.dll" I tried to do system restore first (F10) and it tried to start windows to start the system restore program I suppose and so of course the same error message came up. After retrying a few times, I tried the other option in system recovery (f10) and it said user data would be preserved but I may need to reinstall programs, so I thought that'd be fine. I let it do it's thing and came back later when it was done and it looked like the first time I started my computer ever where it has that cheesy music and asks you to name your computer, etc. So I'm finally in Windows again (XP Media Edition 2002 SP2) and the first thing I check is my documents folder and all my documents are gone! I checked the properties of the C: drive and it shows that I've used 224GB space, but I can't find my files anywhere. I've looked in all profiles in documents and settings. It seems like the files should be somewhere since the hard drive shows that I have that used space.
I have xp and when i start my cmputer i get this Windows could not start because the following file is missing or corrupt windowssystem32configsystem,I don't seam to be able to enter safe mode with f8 pressed.
This happens every time.Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEMWhen I say every time, I mean every time.I just bought a new hard drive, so I know it works.When I try to install xp (full install), I go through the select drive and partition to installEverything looks good so far. Windows starts copying the installer files to the drive. After its done, it reboots. I don't push a button because I know its going to start xp setup now.
I just boot up my computer and a black screen (which i've seen before and has only led to re-install XP) came up saying the following file is missing or corrupt: /system/ntfs32(I don't recall the exact file name - next time I will write it down). But i'm sure many have experience with this.Now somehow I was still able to enter Windows after reboot and F8 (never happened before - i've always had to re-install). What can I do NOW to prevent this next time from happening and perhaps (almost certain actually) having to re-install Windows XP? Can I get that file from somwhere? Am I missing a service Pack? I have SP2 for Windows XP Professional version 2002. (I double checked My Computer>Properties).
Winows says file windowssystems32configsystem is corrupt or missing. It says that I can attempt repair using the original setup CD Rom and typing "R" at the first screen. I have an Emachine 4160. It was loaded at time of purchase and only recovery disc were supplied. I can reboot with the recovery disc but " how can I save my pictures "? Attempts to enter safe mode have been unsuccessful.
I have a big problem. My CFOs computer has been messed up with the uninstallation of Norton. The computer will not boot after trying to run Autocheck (file is missing or corrupt) and the gives an error. I tried to use the Windows XP disc and the setup sees the partition but cannot recognise the format.Unfortunatley I don't know any commands in command line / repair console. Does anyone know commands to get the machine to run checks / get the machine to install XP? Formatting is the last option as there are some data on the machine that is not backed up.
Last night while watching the news, my computer rebooted all on it's own way over on the other side of the room and now I have the following error message. Windows could not start because the folowing file is missing or corrupt System32/drivers/ntfs.sys. I will boot up if I try several times but even after doing a system restore I get the same message plus sometimes I get Windows could not start because the folowing file is missing or corrupt System32/drivers/pci.sys
I have been getting Norton (Corporate, installed by someone else) notificatons for a few weeks about a Trojan (cache.cachekit) and Norton could not get rid of it. Now I cant boot up and it tells me my file(System32/system/config) is missing or corrupt. I was thinking it was my Trojan I couldnt get rid of, what do you think? Also, my OS was installed by someone else so I didnt have my own disk, however I have ordered one and it should come in a week. If it is my elusive Trojan, for one, how do I get rid of it for good, and also, when I get my disk I dont know exactly what to do to fix the computer. I cant bring it up in safemode either. I have never installed a OS, but I have installed other software-on a properly functoning computer that is. Do I absolutely have to wipe my hardrive clean, and if so, how do I do it?
My hard drive crashed on my laptop. I had a running dual boot environment of Win2K and XP. Both the Win2K and XP were backed up with Acronis Ver11. After replacing the hard drive I created the partitions needed for Win2K and XP using a Win2K CD. Formatted and installed Win2k on the first partition. Did a restore of Win2K via Acronics. I used the restore because of the other software I had installed/running on the first partition (Win2K). The XP/OS application I have needs three partitions. The three were created by the Win2K CD and then formatted via Disk Management (Win2K). Next I restored my XP/OS via Acronics on the second partition. Modified the Boot.ini file for both Win2K and XP. The Win2K boots no problem. Selecting XP I get the following error: Missing or corrupt file Windows system32 configsystemd. I did copy in the NTldr and NTDetect from the i386 folder (XP CD), to the XP OS no change.
It worked fine for a few days, then I got this blue screen that said I have a system error and that I am missing a file or it is corrupt c:windowssystem32configsystem.Now, this was fine because I thought I knew the answer to this problem, which is incidentally the answer to another recent problem posted on this board, it can be found here:URL...I performed the operation, and again, it was all well and good for a few days.Then I got the same problem again. I used the same solution to make a fix.Then it happened again.So, my question is what's the problem? Do I have a hardware problem? I even used two different WinXp install discs to solve this problem on different occasions since I only needed the recovery console and I thought that the original disc might have become damaged or something.
When I started up my computer yesterday it said I had a missing or corrupt file and I needed to reinstall windows. So I put my disk in and it said loading files then it said setup is starting windows and then it said loading files. It kept doing this over and over and over. So I took the CD out and tried starting the computer. I got a disk read error. This is where I am now.
I start up my laptop I got this message (which only lasts for about 2 seconds): Please select the operating system to start: Microsoft Windows Recovery Console, Microsoft Windows XP Professional. If I don't choose anything in the two seconds, it automatically chooses Microsoft Windows XP Professional, and boots up regularly,previously . I booted it and this message same up after the previous screen, asking me to choose a way in which to start up my machine from the following options:
Safe Mode, Safe Mode w/ Networking, Safe Mode w/ Command Prompt Last Known Good Configuration (your most recent settings that worked)Start Windows Normally No matter which I choose, I get this error message: Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select "r" at the first screen to start repair. I don't have the original Windows Setup Disk
My laptop has corrupted registry, every time I boot up the computer I get the following message "Windows could not start because the following file is missing or corrupt: WindowsSystem32ConfigSystem".Followed by a restart only to lead to the same problem. I get a message saying something about cannot find the directory, I have tested which directory it meant and found out that it is the c:windows epairsystem that it cannot find, it also is not hidden nor anything. The other commands have worked fine.
I've had with it, nor the first time this EXACT thing has happened before. my boot files get corrupt. First I was told that boot.dll or some such file is missing. I repaired that through the Windows XP CD Repair option, then ran a chkdsk /r. Next bootup I was told another .dll - something like hal.dll - is missing or corrupt, and when I fix that, I was told my system registry is corrupt. The following file is missing or corrupt: C:WINDOWSSystem32System.exe, after booting from the Windows XP CD, hit ENTER for setup and then R to repair existing installation. if I try to start WinXP normally a blue screen flashes, some sentences spring up and before I can begin to read them, the PC reboots.
[I cannot boot up my server. After the boot loader phase, the server stops in the kernel load phase and issues the following error message: Windows 2000 could not start because the following file is missing or corrupt: <windows 2000 root>system32 toskrnl.exe I do not have any ERD (Emergency Rescue Disks) and when I use the original Windows Server CD, I got to the Recovery Console but wont work
I was playing Medieval II: Total War and the computer crashes. Then when I try to boot it up I get Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM. I've checked BIOS for the boot procedure, and everything seems to be in order. I then go through the regular procedure of putting in the CD to run the repair. I boot from the CD, it loads up fine... but there are no partitions and no option to enter the recovery console (which I've read so many wonderful things about).
So now I'm sort of stuck. There's no options other than install and delete the selected (none) partition. If I hit delete (b/c in anger sometimes I'm an idiot) it tells me it's a system partition and there could be VALUABLE system information like AN OS (I'm fuming at this point). NO... I did not delete it. If I hit install, I get a bunch of bogus about how "Setup cannot install to the selected partition.
I have a Dell Inspiron E1505 laptop with windows XP and when I turn it on, a black screen appears and in the upper left hand corner of the screen in white writing it says,Windows could not start because the following file is missing or corrupt:<Windows root>system32hal.dll.Please re-install a copy of the above file.
Ok, so, my computer wouldn't boot up right? I had to repair the installation etc and activate Windows, which I did today. The just recently, I was in safe mode trying to fix the PC, and then it restarted, and now everytime I try to start it up, it says,
The file Windows...../config/SYSTEM is missing or corrupt and it says I have to repair Windows, using the disk.
My computer displays this message when booting up:Code: Windows could not start because the following file is missing or corrupt:WINDOWSSYSTEM32CONFIGSYST EMYou can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM.Select 'r' at the first screen to start repair.The only disk I can think it is refering to is the Operating System disk. It had an option for an automated repair thing but then it asked for a floppy disk - I didn't have one. When if finally came to the window with an option to repair the system, I hit 'r' It then said there was no hard drive available and could not proceed with the repair.
