My hard drive crashed on my laptop. I had a running dual boot environment of Win2K and XP. Both the Win2K and XP were backed up with Acronis Ver11. After replacing the hard drive I created the partitions needed for Win2K and XP using a Win2K CD. Formatted and installed Win2k on the first partition. Did a restore of Win2K via Acronics. I used the restore because of the other software I had installed/running on the first partition (Win2K). The XP/OS application I have needs three partitions. The three were created by the Win2K CD and then formatted via Disk Management (Win2K). Next I restored my XP/OS via Acronics on the second partition. Modified the Boot.ini file for both Win2K and XP. The Win2K boots no problem. Selecting XP I get the following error: Missing or corrupt file Windows system32 configsystemd. I did copy in the NTldr and NTDetect from the i386 folder (XP CD), to the XP OS no change.
All of a sudden I cannot boot up my Toshiba laptop (2.3mhz pent4, 512 RAM, Windows XP Home with SP2). I get the error message "Windows XP could not start because the following file is missing or corrupt:C:windowssystem32configsystem".By hitting the F8 key when starting I can get the start menu and I've tried booting into safe mode and I've tried "boot using last known good configuration" - but still get the same error message.
Get message "Cann't find import;dll may be missing, corrupt or wrong version file "RTL70.BPL", error 126. Trouble shooting steps taken - 1. Turned off System Restore, 2. Ran Disk Clean Up, 3. Ran CW Shredder, 4. Ran Ad-Ware, 5. Ran Spyware (Spy-bolt, Microsoft Antispyware), 6. Ran AVG Antivirus, 7. Rebooted in the Safe Mode, 8. Reran steps 2-6, 9. Rebooted in the Normal Mode, 10. Turned System Restore back on. Still get warning message.
I’m running a Dell Dimension 3100 desktop pc (512 RAM I think) with Windows XP and on start up I am receiving a black screen and the following message: Windows could not start because the following is missing or corrupt:system32drivers fts.sys You can attempt to repair this file by starting windows setup using the original cd-rom. Select 'r' at first screen to start repair.
I have fixed this problem in the past in repair mode and i want to do the same with this, but, there is no filename at the end of the statement see below Windows could not start because the following file is corrupt or missing windowssystem32configsystem Can this be fixed in repair mode without having to be reformated or reimaged.
It prompted for the disks and one by one i started to feed them in but when i get tI bought a second hand laptop Its a Compaq Armada with 1ghz processor 192mb ram (soon to be upgraded to 576mb) This machine came with a floppy drive only i have now bought a dvdrom for it that interchanges with floppy drive. It appears to have originally had windows 2000 on it and i would like to put xp home on it. When i turn it on this is what i get "Initializing Intel Boot Agent Version 2.6 (build004)" Then it goes to a message saying "Non-System disk or disk error replace and strike any key when ready" I have downloaded 6 boot disks from microsoft and i have a new copy of xp home. I put in the first boot disk and all seemed to be going well.
I had problems right out of the gate...after typing out the first command line: tmpsystem.bak and hitting enter, I got the message that said could not find file...so I tried again and was extra diligent with my typing, but the same disappointing message came up.I decided to use some imagination and initiative and, started with the last command line first: tmpdefault.bak This worked for this line and then the next one too: tmpsecurity.bak and so on. When I got back to the tmpsystem.bak line, it even worked for that one too.
Then I moved on to the delete commands and that worked out OK...as far as I could tell?But, when I got to the repair lines and, in particular, the: repairsystem C:windowssystem32configsystem I then got the same message saying that the file could not be found...back to square one.Then I went back to the start...typing out the copy lines, and I got the same message for the system line again. So, I started from the default line again and it worked--I was asked if I wanted to re-write the first file copied and I chose Y (yes) then the same brick wall when I got to the system line.
So my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message.... Windows could not start because the following file is missing or corrupt: windowssystem32configSYSTEM Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair. So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts. I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
My friend's comp isnt working it gets the following error during boot up
"Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM"
I tried the windows support method to recovering from a corrupt registry..after I created a temp folder I entered the first copy line copy c:windowssystem32configsystems c:windows mpsystem.bak...it says that this file does not exist....any help would be greatly appreciated
I bought a new hard drive and tried to load XP Home on it, and I keep getting the same error message "Windows System 32 hll.dll is missing or corrupt...." Does anyone have any suggestions on how to get rid of this? It happen when I initally load XP and then have to restart. Cannot go past this message.
i am finding a missing file named ks.sys.i have been trying to install audio devices for my computer and it will not allow me to install them because i'm missing files. at first i was missing ksuser.dll file but i was able to download that and install it, and now its asking for the ky.sys file.
Is perfmon.exe a critical system file?Or would the computer still be able to boot properly if the file has been removed from the system (including the registry entries - all of them regarding perfmon)Windows server 2003, had a virus attack, junior administrator deleted the virus "perfhmon.exe" from the system and all registry entries, but in doing so also deleted the legitimate "perfmon.exe" and its registy entries.I would like to know how i may be able to re-install the files and their corresponding registry entries
I just boot up my computer and a black screen (which i've seen before and has only led to re-install XP) came up saying the following file is missing or corrupt: /system/ntfs32(I don't recall the exact file name - next time I will write it down). But i'm sure many have experience with this.Now somehow I was still able to enter Windows after reboot and F8 (never happened before - i've always had to re-install). What can I do NOW to prevent this next time from happening and perhaps (almost certain actually) having to re-install Windows XP? Can I get that file from somwhere? Am I missing a service Pack? I have SP2 for Windows XP Professional version 2002. (I double checked My Computer>Properties).
When trying to turn on my computer i get the following message: Windows could not start because the following file is missing or corrupt: Windowssystem32configsystem You can attempts top repair this file by starting Windows Setup using the original Setup CD-ROM Select 'r' at the first screen to start repair. i have done endless searches on my desktop to try to find a step by step out of this problem. i have followed such things as: >>Problem: You turn off your computer one day and then go to restart to find an error message that says: Windows could not start because the following file is missing or corrupt C:windowssystem32configsystem You can attempt to repair this file by starting windows setup using the original setup CD-Rom. Select "r" at the first screen to start repair.
Winows says file windowssystems32configsystem is corrupt or missing. It says that I can attempt repair using the original setup CD Rom and typing "R" at the first screen. I have an Emachine 4160. It was loaded at time of purchase and only recovery disc were supplied. I can reboot with the recovery disc but " how can I save my pictures "? Attempts to enter safe mode have been unsuccessful.
I shut down my laptop before I left last night and when I hope, my system didnt shut down all the way and there was a blue screen saying an error had occurred and if this was the first time I had seen the message to shut the ocmputer down and restart it.I did as instructed. When I powered it back up, I recieved a message saying Windows could not start because the following file is missing or corrupt:<Windows root"system32 toskrnl.exe. Please reinstall a copy of the above file.The problem is, I don't have the XP cd as my laptop came pre-installed. A friend suggested I go into the safe mode and do a system restore to the last saved date.
I have a big problem. My CFOs computer has been messed up with the uninstallation of Norton. The computer will not boot after trying to run Autocheck (file is missing or corrupt) and the gives an error. I tried to use the Windows XP disc and the setup sees the partition but cannot recognise the format.Unfortunatley I don't know any commands in command line / repair console. Does anyone know commands to get the machine to run checks / get the machine to install XP? Formatting is the last option as there are some data on the machine that is not backed up.
Last night while watching the news, my computer rebooted all on it's own way over on the other side of the room and now I have the following error message. Windows could not start because the folowing file is missing or corrupt System32/drivers/ntfs.sys. I will boot up if I try several times but even after doing a system restore I get the same message plus sometimes I get Windows could not start because the folowing file is missing or corrupt System32/drivers/pci.sys
I have been getting Norton (Corporate, installed by someone else) notificatons for a few weeks about a Trojan (cache.cachekit) and Norton could not get rid of it. Now I cant boot up and it tells me my file(System32/system/config) is missing or corrupt. I was thinking it was my Trojan I couldnt get rid of, what do you think? Also, my OS was installed by someone else so I didnt have my own disk, however I have ordered one and it should come in a week. If it is my elusive Trojan, for one, how do I get rid of it for good, and also, when I get my disk I dont know exactly what to do to fix the computer. I cant bring it up in safemode either. I have never installed a OS, but I have installed other software-on a properly functoning computer that is. Do I absolutely have to wipe my hardrive clean, and if so, how do I do it?
Well, I woke up this morning to turn on my computer, and I got an error like this. "windows could not start because the following file is missing or corrupt: windowssystem32configsystem. You can try repairing by using the original windows xp setup cd, press r on the first screen." Well, after scrounging for the xp cd, I put it in and booted from the cd, tried to do a repair install, but the repair option was not available. I could only install another copy of xp (onto the current copy) which I didn't want to do if it means that all my data is lost (I really don't want to lose them again!).I exited and googled up on why repair was not an option (I'm using my laptop btw), and some random dude told another guy with a similar problem to do chkdsk and bootcfg in recovery console. I went into recovery console and kind of played around with bootcfg, and I used the /rebuild function thinking it was repair, and then it asked me to type something and I was confused, so i entered "n" (for no). Well, basically now when I restart I have the option of booting up "Xp Home Edition" or "n", both of which lead to the missing file message, but how did I make two windows? And can I get rid of this "n" windows I made?
It worked fine for a few days, then I got this blue screen that said I have a system error and that I am missing a file or it is corrupt c:windowssystem32configsystem.Now, this was fine because I thought I knew the answer to this problem, which is incidentally the answer to another recent problem posted on this board, it can be found here:URL...I performed the operation, and again, it was all well and good for a few days.Then I got the same problem again. I used the same solution to make a fix.Then it happened again.So, my question is what's the problem? Do I have a hardware problem? I even used two different WinXp install discs to solve this problem on different occasions since I only needed the recovery console and I thought that the original disc might have become damaged or something.
When I started up my computer yesterday it said I had a missing or corrupt file and I needed to reinstall windows. So I put my disk in and it said loading files then it said setup is starting windows and then it said loading files. It kept doing this over and over and over. So I took the CD out and tried starting the computer. I got a disk read error. This is where I am now.
"Install" option is missing from the context menu for *.inf files. Google gives many results, but all considering the same problem for Win95/98/2000, and not for XP which is my OS.
It is probably a registry problem, since it is the same case on my both computers with same software, and different hardware. I've tried everything I knew, but can't move a bit.
I have one more problem with context menu; WinRAR "extract" options are present, but not working for *.rar files. They do work for other archives though. This is not such a big problem, but I am mentioning it beacause there is a possibility that both are connected.
I desperatly need to install an *.inf driver. No way around. I NEED to get back "INstall" option in the context menu for *.inf file drivers.
Ok, so, my computer wouldn't boot up right? I had to repair the installation etc and activate Windows, which I did today. The just recently, I was in safe mode trying to fix the PC, and then it restarted, and now everytime I try to start it up, it says,
The file Windows...../config/SYSTEM is missing or corrupt and it says I have to repair Windows, using the disk.
My computer displays this message when booting up:Code: Windows could not start because the following file is missing or corrupt:WINDOWSSYSTEM32CONFIGSYST EMYou can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM.Select 'r' at the first screen to start repair.The only disk I can think it is refering to is the Operating System disk. It had an option for an automated repair thing but then it asked for a floppy disk - I didn't have one. When if finally came to the window with an option to repair the system, I hit 'r' It then said there was no hard drive available and could not proceed with the repair.
I have a workstation running XP Pro that displays the following error message.Windows could not start because the following file is missing or corrupt.Windows rootsystem32hal.dll. Please re-install a copy of the above file.I did get the machine to at least prompt me for OS choice, yet Windows 2000 Professional was the only OS option listed..
Computer is packed with spy-ware and viruses. I've been trying to clean it up and now I'm getting this message on start up. What should I do. The computer won't even start up. He is running a bootleg version of windows. And his setup disk doesn't seem to help. Windows could not start because the following file is either missing or corrupt. windowssystem32configsystem, You can attempt to repair this file by running windows setup using the originally setup CD-ROM. Select "r" at the first screen to start repair.
