System Missing A File Named "perfmon.exe" At Every Startup?
Sep 6, 2005
Is perfmon.exe a critical system file?Or would the computer still be able to boot properly if the file has been removed from the system (including the registry entries - all of them regarding perfmon)Windows server 2003, had a virus attack, junior administrator deleted the virus "perfhmon.exe" from the system and all registry entries, but in doing so also deleted the legitimate "perfmon.exe" and its registy entries.I would like to know how i may be able to re-install the files and their corresponding registry entries
When I start the laptop, the first black screen loads, and then directly skips to an error message saying "Windows cannot start because the Windows/system32/ config/system file is either corrupt or missing." Then it prompts you to try to load Windows using the installation CD.which I do not have! Whoever's reading this, PLEASE please help me, the laptop's like, my life, and I haven't had the common sense to back up anything
I have asked this before, but on startup, I have several processes named svchost.exe that run on startup. One of these is a network service and every time, this particular one uses 50% +/- CPU. Apps will not open, nothing will function correctly until this is terminated.
So my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message.... Windows could not start because the following file is missing or corrupt: windowssystem32configSYSTEM Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair. So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts. I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
what i would like is a step by step of how to repair this problem i have tryed copying this file from the xp disk to copy ntoskrnl.exe as follows e:where e is my cd drive e: copy e:i386toskrnl.exe c:windowssystem32 and it tells me file cant be found but when i do a dir e:i386 it gives me the file.
wen i start up my computer it comes up with this :windowssystem32configsystem....missing or corrupt you can attempt to repair this file by starting windows setup using the original setup CD-ROM . Select "R" at the first screen to start repair i hav no idea what this means or how to fix it . i hav the oorginal windows CD .
I cannot get into my PC. All of a sudden I trun on my PC and the login icons is MISSING! There is no username icon to click at the welcome screen. I tried to boot in safe mode and it still requires I click a user. I hit CNTRL+DEL+ALT twice to log on but it wouldnt take my password so I have no way to get into my system. Its Windows XP pro and I am not sure if I have SP2 or not.
The system can be restored by using the Startup CD and pressing R for recover, but I do not have any cd. The only one I have it the recover cd, but it is my understanding that if I use the recovery cd that I will erase everything from my computer and I can not do this.I tried to read the other threads about the same problem, but to be honest I do not understand them and I just do not have the startup cd - maybe it is the same as the recovery cd?
I get this error loading DOCEOC16B1 after boot along with an unwanted little winodw in the right corner above tool bar on desktop, it sat Search the Web on it. I have run the latest versions of spybot SD, ad aware, CW shredder, and also Counterspy 1.0. The boot takes much longer than normal now too.
I tried to start my computer and I suddenly received the following message:"Windows 2000 could not start because the following file is missing or corrupt: WINNT/ SYSTEM32/CONFIG/SYSTEMced startup options for Windows, press F8." I'm not sure how to fix this problem. I have tried to press F8 --but nothing happens. I'm afraid a virus has destroyed the data on my hard drive.
is it safe to delete my older profile named Administrator from System Properties Advanced tab>under User Profiles>Settings? as i already have a new administrator account. it all happened when my Pc crashed & i had to create a new administrator account.also i booted it twice so it created two additional folders-Administrator.username & Administrator . Also it gives me an option to delete the old Administrator from above path.
My CD ROM/DVD player recently stopped working on my Omitech computer. From My Computer - I can't see the drive anymore. In the device manager - it has a yellow exclamation mark on it. I tried updating the driver but the message was that the software was already the best match. I tried uninstalling and reinstalling but it says a file is missing or corrupt. I bought a new external CD ROM - but have the exact same problem with it. I went to Run and put in sfc /scannow and there were problems that maybe could be fixed - if only it could read the XP CD - then it could fix the CD ROM. But it can't read the CD because of the problem with the CD ROM. (a whole in my bucket story.) So - how can I fix the problem if it wants a CD to fix the problem but the CD ROM is not working to read the CD?
On startup this computer Windows (XP Pro) will not start because the file WINDOWSSYSTEM32CONFIGSYSTEM is missing or corrupt. Is there a way to replace this file?
I have fixed this problem in the past in repair mode and i want to do the same with this, but, there is no filename at the end of the statement see below Windows could not start because the following file is corrupt or missing windowssystem32configsystem Can this be fixed in repair mode without having to be reformated or reimaged.
Ok, so, my computer wouldn't boot up right? I had to repair the installation etc and activate Windows, which I did today. The just recently, I was in safe mode trying to fix the PC, and then it restarted, and now everytime I try to start it up, it says,
The file Windows...../config/SYSTEM is missing or corrupt and it says I have to repair Windows, using the disk.
When Windows XP boots up, an error message states that a system file is corrupt or missing. Which command scans Windows system files for missing or corrupt operating systems files and replaces them with the correct Microsoft versions?
I have a 2.4 2 gig ram and a raid hard drive on my computer with 4 x 80g I'm not that raid literate and a friend helped me set it up but I know my way a bit with computers. The other night all of a sudden the computer froze up and when I tried to restart it I got this message
windowssys32configsystem with the corrupt or missing system file. First I tried getting my windows CD and using the "r" option to repair it but when I do that I get this message "Setup did not find any hard drives on this computer etc..." I was perplexed by this and went into my bios and under primary hardrive it detected nothing. I hit ctrl S for the raid utility and in the raid options it shows the 4 hard drives. I opened the case made sure everything was connected right and the 4 hard drives are hot still.
I turned on my computer and windows didn't start up. It didn't even go into post or anything. What came up was that there was a corrupted file. winntsystem32 configsystem. I know this means that that file is missing but I cannot fix it because I don't have my Windows XP CD nor do I have a Startup Disk so I could recover the register. What I have done was, got a BART CD and booted from it and windows loaded but I don't know how to fix or find the corrupted file.
My problem started when I booted my computer. Windows (XP Home Edition) started with the message that windows/system32/config/system.sav was missing or corrupt. It told me to use the recovery console to solve the problem. I saw with the recovery console that the system.sav file wasn't missing so it had to be corrupt (0 bytes in filesize).
Tried to boot my xp pro today and received the message windowssystem32configsystem file Missing.Pressed f8 key on start up but am unable to move the cursor to select anything. To top it all I dont have the windows boot disc as I bought pc second hand.
I have tried FIXMBR, FIXBOOT and now trying to reinstall using the guide in another thread. I do not get the same R option when I get to the SETUP screen. It looks to me like it will fresh install XP and wipe everything. Originally I was getting missing SYSTEM file and boot stops. I found what I thought was the SYSTEM file and put it into the directory but it still will not boot. I just get another new error.
Windows could not start because the following file is missing or corrupt: /windows/system32/config/system It states that I can put in the originial setup CD-ROM and select 'r' to start repair but that doesn't help me. My laptop did not come with a windows cd as I bought it preloaded from BestBuy. So about 4 years ago when my computer was overcome with the Sasser worm, I reformatted and loaded a friend of mine's Win XP Pro cd on my laptop. I still have the CD but when I hit 'r' (Boot partition recovery) it does its little DOS thing and then gives me a Disk I/O Error. I am thinking that maybe it is trying to boot from a floppy drive and not my CD drive and thats why I am getting the I/O error?
I just now installed the KDE Cygwin (kde-cygwin)for Windows on my Win XP SP2 machine. However, upon restart I am now receiving the message "NTLDR Missing". I have tried following the instruction found on numerous forums and at computerhope.com but I continue to receive the same message every restart. This is what I have done so far: Restarted with the Win XP CD-ROM and went to the Recovery Console. Logged into my C: drive using the admin password. Copied "F:i386NTLDR" and "F:i386NTDETECT.com" to the root of my C drive. Ran "bootcfg /rebuild" and then "fixboot". After doing all of the above I restarted and am still met with the "NTLDR Missing" message. Again I booted back into the Recovery Console and checked to see what had been written into the boot.ini file using "bootcfg /list" and this is what I got:
[1] "" OS Load Options: OS Location: C:WINDOWS
Does this look right?? I tried typing the "fixmbr" command in and was met with the message, "This computer appears to have a non-standard or invalid master boot record." which was followed the threat that if I continued then I might lose all of the data on my drive, which is not an option for me. I am trying to avoid the need run a "repair installation" from the Win XP boot CD. That would require a lot of PITA work to update Windows back to SP2 and reinstall a bunch of other apps.
I have been searching for how to fix my son's computer which comes up with windows system32 config system - Windows could not start b/c the following file is missing or corrupt. He has a Dell and everything I've read seems to give warnings about doing recovery with a Dell. There was no OS CD with it.
"Windows could not start because the following file is missing or corrupt: c:windowssystem32configsystem. You can attempt to repair this file by starting Windows Setup using the original CD-ROM. Select 'r' at the first screen to start repair." The problem is that I purchased my PC 6 years ago from a retailer fully loaded and I received NO discs with it. Since I don't have the original CD-ROM, can I burn the files onto another CD from a website? Does anyone know which files I need? My PC is an HP multi media center 873n running XP home.
I'm getting a message: autoexec.nt the system file is not suitable for running ms-dos and microsoft windows applications.choose close to terminate the application. seems I'm missing these files:
config.nt autoexec.nt command.com
I tried to recovery them off the recovery disk but they are not there either. is there someplace I can get these files? I went to microsoft.comsupport and tried to put them in through notepad like they said and it did'nt work, must be doing something wrong.
I have a IBM comnputer and I used my sisters reboot disks. She has a set of five disks to use.. they say IBM/Leveno ghost. When I tried to wipe my system clean and reboot, it said "the following file is missing or corrupt" /WINDOWS/system32/config/SYSTEM
The run link is missing from my startup menu...can anyone help me find it? I know this sounds dumb, but I really need to restore it to my startup so I can take care of some other problems I'm having.
a program called "System Guard 2008" has installed itself. It slowed down quite a bit and eventually crashed on me. Now it wont boot up all the way. I turn it on, it will get all the way to the Windows password screen, then once I enter my password and click on the green arrow, I get a warning message that my paginf file is either non existant or too small. Then once I click "OK" on that warning message, the screen blacks out, restarts the boot process, gets to the password screen, and that cycle just continues over and over. Ive tried to boot into safe mode, safe mode with command prompt, last known good configuration
I have found in many places on my computer files that are called sharaza is it garbage malware or what ever? How do i get rid of it. I am running wxp sp2
All of a sudden I cannot boot up my Toshiba laptop (2.3mhz pent4, 512 RAM, Windows XP Home with SP2). I get the error message "Windows XP could not start because the following file is missing or corrupt:C:windowssystem32configsystem".By hitting the F8 key when starting I can get the start menu and I've tried booting into safe mode and I've tried "boot using last known good configuration" - but still get the same error message.
