This happens every time.Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEMWhen I say every time, I mean every time.I just bought a new hard drive, so I know it works.When I try to install xp (full install), I go through the select drive and partition to installEverything looks good so far. Windows starts copying the installer files to the drive.
After its done, it reboots. I don't push a button because I know its going to start xp setup now.
I am havinga very big problem with my PC. When I try to start it up normally, I get the following message; "Windows could not start because the following fileis missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM. You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select 'r' at the first screen to start repair" When I try this, it opens repair console, but then I have to select OS, and when I do this, it just comes up with the previous error. If I try to reinstall it comes up with a blue screen error and crashes.
So my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message.... Windows could not start because the following file is missing or corrupt: windowssystem32configSYSTEM Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair. So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts. I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
I have xp and when i start my cmputer i get this Windows could not start because the following file is missing or corrupt windowssystem32configsystem,I don't seam to be able to enter safe mode with f8 pressed.
When trying to turn on my computer i get the following message: Windows could not start because the following file is missing or corrupt: Windowssystem32configsystem You can attempts top repair this file by starting Windows Setup using the original Setup CD-ROM Select 'r' at the first screen to start repair. i have done endless searches on my desktop to try to find a step by step out of this problem. i have followed such things as: >>Problem: You turn off your computer one day and then go to restart to find an error message that says: Windows could not start because the following file is missing or corrupt C:windowssystem32configsystem You can attempt to repair this file by starting windows setup using the original setup CD-Rom. Select "r" at the first screen to start repair.
I shut down my laptop before I left last night and when I hope, my system didnt shut down all the way and there was a blue screen saying an error had occurred and if this was the first time I had seen the message to shut the ocmputer down and restart it.I did as instructed. When I powered it back up, I recieved a message saying Windows could not start because the following file is missing or corrupt:<Windows root"system32 toskrnl.exe. Please reinstall a copy of the above file.The problem is, I don't have the XP cd as my laptop came pre-installed. A friend suggested I go into the safe mode and do a system restore to the last saved date.
Well, I woke up this morning to turn on my computer, and I got an error like this. "windows could not start because the following file is missing or corrupt: windowssystem32configsystem. You can try repairing by using the original windows xp setup cd, press r on the first screen." Well, after scrounging for the xp cd, I put it in and booted from the cd, tried to do a repair install, but the repair option was not available. I could only install another copy of xp (onto the current copy) which I didn't want to do if it means that all my data is lost (I really don't want to lose them again!).I exited and googled up on why repair was not an option (I'm using my laptop btw), and some random dude told another guy with a similar problem to do chkdsk and bootcfg in recovery console. I went into recovery console and kind of played around with bootcfg, and I used the /rebuild function thinking it was repair, and then it asked me to type something and I was confused, so i entered "n" (for no). Well, basically now when I restart I have the option of booting up "Xp Home Edition" or "n", both of which lead to the missing file message, but how did I make two windows? And can I get rid of this "n" windows I made?
I start up my laptop I got this message (which only lasts for about 2 seconds): Please select the operating system to start: Microsoft Windows Recovery Console, Microsoft Windows XP Professional. If I don't choose anything in the two seconds, it automatically chooses Microsoft Windows XP Professional, and boots up regularly,previously . I booted it and this message same up after the previous screen, asking me to choose a way in which to start up my machine from the following options:
Safe Mode, Safe Mode w/ Networking, Safe Mode w/ Command Prompt Last Known Good Configuration (your most recent settings that worked)Start Windows Normally No matter which I choose, I get this error message: Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select "r" at the first screen to start repair. I don't have the original Windows Setup Disk
My laptop has corrupted registry, every time I boot up the computer I get the following message "Windows could not start because the following file is missing or corrupt: WindowsSystem32ConfigSystem".Followed by a restart only to lead to the same problem. I get a message saying something about cannot find the directory, I have tested which directory it meant and found out that it is the c:windows epairsystem that it cannot find, it also is not hidden nor anything. The other commands have worked fine.
I've had with it, nor the first time this EXACT thing has happened before. my boot files get corrupt. First I was told that boot.dll or some such file is missing. I repaired that through the Windows XP CD Repair option, then ran a chkdsk /r. Next bootup I was told another .dll - something like hal.dll - is missing or corrupt, and when I fix that, I was told my system registry is corrupt. The following file is missing or corrupt: C:WINDOWSSystem32System.exe, after booting from the Windows XP CD, hit ENTER for setup and then R to repair existing installation. if I try to start WinXP normally a blue screen flashes, some sentences spring up and before I can begin to read them, the PC reboots.
I have a workstation running XP Pro that displays the following error message.Windows could not start because the following file is missing or corrupt.Windows rootsystem32hal.dll. Please re-install a copy of the above file.I did get the machine to at least prompt me for OS choice, yet Windows 2000 Professional was the only OS option listed..
Computer is packed with spy-ware and viruses. I've been trying to clean it up and now I'm getting this message on start up. What should I do. The computer won't even start up. He is running a bootleg version of windows. And his setup disk doesn't seem to help. Windows could not start because the following file is either missing or corrupt. windowssystem32configsystem, You can attempt to repair this file by running windows setup using the originally setup CD-ROM. Select "r" at the first screen to start repair.
[I cannot boot up my server. After the boot loader phase, the server stops in the kernel load phase and issues the following error message: Windows 2000 could not start because the following file is missing or corrupt: <windows 2000 root>system32 toskrnl.exe I do not have any ERD (Emergency Rescue Disks) and when I use the original Windows Server CD, I got to the Recovery Console but wont work
XP PRO SP2- Recieve the following message upon unsuccessful boot attempt. "WINDOWS COULD NOT START BECAUSE THE FOLLOWING FILE IS MISSING OR CORRUPT: <WINDOWS ROOT> SYSTEM32HAL.DLL (not yelling ) I have tried to boot from my xp pro cd to utilize the recover utility however the computer will not boot from the cd. I able to use a dos boot disk however my keyboard is USB and I cannot find USB drivers to work under dos, so I was unable to do anything at that point. It was my hope that I could work through dos to edit the boot.ini file.
I do not want to reinstall windows. If I have to I will place the hard drive in another computer as a slave and work on it that way but I'd rather not. The only other tower type computer I have other then laptops is running xp home SP2.
I was playing Medieval II: Total War and the computer crashes. Then when I try to boot it up I get Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM. I've checked BIOS for the boot procedure, and everything seems to be in order. I then go through the regular procedure of putting in the CD to run the repair. I boot from the CD, it loads up fine... but there are no partitions and no option to enter the recovery console (which I've read so many wonderful things about).
So now I'm sort of stuck. There's no options other than install and delete the selected (none) partition. If I hit delete (b/c in anger sometimes I'm an idiot) it tells me it's a system partition and there could be VALUABLE system information like AN OS (I'm fuming at this point). NO... I did not delete it. If I hit install, I get a bunch of bogus about how "Setup cannot install to the selected partition.
I have a Dell Inspiron E1505 laptop with windows XP and when I turn it on, a black screen appears and in the upper left hand corner of the screen in white writing it says,Windows could not start because the following file is missing or corrupt:<Windows root>system32hal.dll.Please re-install a copy of the above file.
I have been searching for how to fix my son's computer which comes up with windows system32 config system - Windows could not start b/c the following file is missing or corrupt. He has a Dell and everything I've read seems to give warnings about doing recovery with a Dell. There was no OS CD with it.
I jus put together my own system. I bought a P4 511 processor and an ASUS P5P800-MX motherboard and two 512 MB sticks of RAM I'm using my old 40 GB harddrive from my previous computer. I had installed Windows XP Professional with SP2 and it all worked fine. I then turned my computer off for the night and the next day when I started the computer it would not boot into windows it showed the error message "The following Windows file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM". I booted from the windows XP cd and went into the recovery console and used CHKDSK /R and when that finished Windows booted up fine. However everytime i turn the PC off the error occurs again. Any ideas how to fix this problem permanantly instead of jus until the next reboot?
I restarted my computer after installing an update to my firewall program. I get the "windows could not start because the following file is missing or corrupt: WindowsSystem32Hal.dll" I tried to do system restore first (F10) and it tried to start windows to start the system restore program I suppose and so of course the same error message came up. After retrying a few times, I tried the other option in system recovery (f10) and it said user data would be preserved but I may need to reinstall programs, so I thought that'd be fine. I let it do it's thing and came back later when it was done and it looked like the first time I started my computer ever where it has that cheesy music and asks you to name your computer, etc. So I'm finally in Windows again (XP Media Edition 2002 SP2) and the first thing I check is my documents folder and all my documents are gone! I checked the properties of the C: drive and it shows that I've used 224GB space, but I can't find my files anywhere. I've looked in all profiles in documents and settings. It seems like the files should be somewhere since the hard drive shows that I have that used space.
I have fixed this problem in the past in repair mode and i want to do the same with this, but, there is no filename at the end of the statement see below Windows could not start because the following file is corrupt or missing windowssystem32configsystem Can this be fixed in repair mode without having to be reformated or reimaged.
I'm getting a WINDOWSSYSTEM32CONFIGSYSTEM message all of a sudden!DESPERATELY need to copy some personal files somewhere before trying to restore / reformat
My computer, a dell dimension 8400 with windows xp home edition, keeps coming up with an error saying:Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32Configsystem.i ran boot utility and scanned the computer and the drives come up fine with the test(except the hard disk which popped up errors on a constant.)
i have windows xp pro installed on my pc along with linux mandrake 10.1 and one day while my dad was surfing the net the sreen turned blue and some type of error message came up and it said to do something if it happend again but i ignored it becuase i thought it wouldnt happen again so i restarted and when it came back on it went to a black sceen and i couldnt do anything but if i let it wait there it would come up with an error saying that windowssystem32config system was missing or corrupt
Iām running a Dell Dimension 3100 desktop pc (512 RAM I think) with Windows XP and on start up I am receiving a black screen and the following message: Windows could not start because the following is missing or corrupt:system32drivers fts.sys You can attempt to repair this file by starting windows setup using the original cd-rom. Select 'r' at first screen to start repair.
I'm running a Dell XPS 600 with Windows XP Professional Media Center Edition. Well, OK, it's not really running.I used System Restore to return my PC to a point about six weeks ago when the system was more stable. The PC rebooted, and now it won't boot any more due to a missing/corrupt CONFIGSYSTEM file.It won't boot from either of my CD drives, either. I've used the boot Setup to alter the boot sequence but that doesn't help, the system just doesnt recognize those drives during boot. For this same reason, I've been unable to access the Recovery Console.
I was unable to start Windows XP and was in a sort of start-up loop. I reinstalled Windows and I have had to start again from scratch. Everything seems to be working OK but when I start up each day I get messages to say that certain files have been lost due to a hardware or network failure and to save these files elsewhere.
windows could not start because the following file is missing or corrupt: /windows/system32/config/system
you can attempt to repair this file by starting windows setup using the original setup cd rom, select r at the first screen to start repair press 'r'
The problem is that this error already occurred and i cant access my windows at all. I have a mac computer with bootcamp (so it has both a mac and pc harddrives), the pc harddrive being the one that has this problem and that i cant access. Unfortunately, I do not have the original XP CD so that's probably not an option... Is there any way I can fix this problem without the CD, or is it absolutely necessary?
I have a Compaq laptop that I bought about a year ago. Of course, I did not get a Windows disk with it and I cannot find the software that I did get. When I try to start it, it says that Windows cannot start because a file is missing or corrupt. The file is "windowssytem32configsystem". It suggests that I attempt to repair it using the original Setup CD-ROM, which, of course, I don't have.
I've had the familiar hal.dll missing or corrupt on starting XP SP1 on a mainboard NameMSI KM2M Combo (MS-6738).All I did was to take out the 1 Gig of SDRAM I've used OK for months and fit a new 1 Gig DDR module. A year or two back I had STOP errors through merely changing a RAM module, the simplest upgrade usually, so I kept switching RAM until it went with no STOPs. I resent having to reinstall an OS for a five-minute RAM refit! Obviously the hal error is caused by the new DDR module, since I'm now using the old SDRAM. Is there a way around this apart from the dreaded reinstall of OS? In the rare event the DDR could be faulty does anyone know a non-windows DDR test utility please?
