I have xp and when i start my cmputer i get this Windows could not start because the following file is missing or corrupt windowssystem32configsystem,I don't seam to be able to enter safe mode with f8 pressed.
View 1 RepliesI had problems right out of the gate...after typing out the first command line: tmpsystem.bak and hitting enter, I got the message that said could not find file...so I tried again and was extra diligent with my typing, but the same disappointing message came up.I decided to use some imagination and initiative and, started with the last command line first: tmpdefault.bak This worked for this line and then the next one too: tmpsecurity.bak and so on. When I got back to the tmpsystem.bak line, it even worked for that one too.
Then I moved on to the delete commands and that worked out OK...as far as I could tell?But, when I got to the repair lines and, in particular, the: repairsystem C:windowssystem32configsystem I then got the same message saying that the file could not be found...back to square one.Then I went back to the start...typing out the copy lines, and I got the same message for the system line again. So, I started from the default line again and it worked--I was asked if I wanted to re-write the first file copied and I chose Y (yes) then the same brick wall when I got to the system line.
I've just turned my notebook on this morning and a screen came up "Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM" It then tells me that I can fix the problem using the original Setup CD-ROM... The problem is, in the last couple of years that I've had it we've moved twice and are about to move again and I can't find it anywhere! And, I need the computer for work. Is there any way I can do this without the CD?
View 1 Replies View RelatedI am having an issue with my computer obviously. I have a VPR Matrix desktop FT6100 computer. It has windows xp as its operating system. We had a huge storm here last Friday causing a total loss of power. Now, when I turn on the computer I am getting the following error message: Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM then it says please put in restore cd and press "r" for the repair menu. I put in my restore cd and the options were to just do the windows xp files, No Format or Quick Format. The first option the computer said was least destructive so I tried that route and brings me back to the same black screen w/ the same error msg. I went to microsoft.com to print off the instructions for the error msg and I can't even get to where the instructions are talking about. I don't want to lose all my files so I haven't touched the other 2 options on the restore cd. How can I fix this with my system?
View 1 Replies View RelatedWindows couldnt start because following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM. You can attempt to repair file by starting Windows Setup using the original Setup CD-ROM. Select?r? at the first screen to start repair. what do do? takes me to repair consol and then? i tried to fixboot.
View 2 Replies View RelatedMy friend's comp isnt working it gets the following error during boot up
"Windows could not start because the following file is missing or corrupt:
WINDOWSSYSTEM32CONFIGSYSTEM"
I tried the windows support method to recovering from a corrupt registry..after I created a temp folder I entered the first copy line copy c:windowssystem32configsystems c:windows mpsystem.bak...it says that this file does not exist....any help would be greatly appreciated
I have an old computer with an Intel Celeron 467 MHz processor, 128 ram and I'm running Windows XP SP2. Earlier this week I came to turn on my computer, and could not log on to Windows. "Windows could not start because the follwing file is missing or corrupt Windowssystem32configsystem." I reinstalled XP. I couln't access the repair install. Then I thought maybe someone had gotten into my computer and I downloaded Zone Alarm...Big mistake. Since then my computer freezes, programs jam, I keep losing my internet connection,(DSL) and I get "cannot find server" messages. Its also slower as molasses in winter. A little better since the removal. Obviously Zone Alarm was removed and i went back to Windows firewall. I also use Ad-Aware, AVG, Spybot Search and Destroy, Spyware Blaster and I use Registry Mechanic and TuneUp Utilities.
View 14 Replies View Relatedwindows wont start up for me and i get the error message Windows could not start because the file is missing or corrupt: windowssystem32configsystem Also i dont have the repair install option under install windows), it just says installing two versions of windows is not recommended do you wish to continue. I went into the recovery console but really have no idea what to do there.
View 11 Replies View RelatedSo my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message....
Windows could not start because the following file is missing or corrupt:
windowssystem32configSYSTEM
Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair.
So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts.
I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
i turned on my pc i got the error XP Could not start, the following file is missing or corrupt:
I run Microsoft Windows home service pack 2Also, to complicate things, My computer is lacking a disk drive, so i only have access to USB ports.
When trying to turn on my computer i get the following message: Windows could not start because the following file is missing or corrupt: Windowssystem32configsystem You can attempts top repair this file by starting Windows Setup using the original Setup CD-ROM Select 'r' at the first screen to start repair. i have done endless searches on my desktop to try to find a step by step out of this problem. i have followed such things as: >>Problem: You turn off your computer one day and then go to restart to find an error message that says: Windows could not start because the following file is missing or corrupt C:windowssystem32configsystem You can attempt to repair this file by starting windows setup using the original setup CD-Rom. Select "r" at the first screen to start repair.
View 14 Replies View RelatedI shut down my laptop before I left last night and when I hope, my system didnt shut down all the way and there was a blue screen saying an error had occurred and if this was the first time I had seen the message to shut the ocmputer down and restart it.I did as instructed. When I powered it back up, I recieved a message saying Windows could not start because the following file is missing or corrupt:<Windows root"system32
toskrnl.exe. Please reinstall a copy of the above file.The problem is, I don't have the XP cd as my laptop came pre-installed. A friend suggested I go into the safe mode and do a system restore to the last saved date.
Well, I woke up this morning to turn on my computer, and I got an error like this. "windows could not start because the following file is missing or corrupt: windowssystem32configsystem. You can try repairing by using the original windows xp setup cd, press r on the first screen." Well, after scrounging for the xp cd, I put it in and booted from the cd, tried to do a repair install, but the repair option was not available. I could only install another copy of xp (onto the current copy) which I didn't want to do if it means that all my data is lost (I really don't want to lose them again!).I exited and googled up on why repair was not an option (I'm using my laptop btw), and some random dude told another guy with a similar problem to do chkdsk and bootcfg in recovery console. I went into recovery console and kind of played around with bootcfg, and I used the /rebuild function thinking it was repair, and then it asked me to type something and I was confused, so i entered "n" (for no). Well, basically now when I restart I have the option of booting up "Xp Home Edition" or "n", both of which lead to the missing file message, but how did I make two windows? And can I get rid of this "n" windows I made?
View 11 Replies View RelatedThis happens every time.Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEMWhen I say every time, I mean every time.I just bought a new hard drive, so I know it works.When I try to install xp (full install), I go through the select drive and partition to installEverything looks good so far. Windows starts copying the installer files to the drive.
After its done, it reboots. I don't push a button because I know its going to start xp setup now.
I start up my laptop I got this message (which only lasts for about 2 seconds): Please select the operating system to start: Microsoft Windows Recovery Console, Microsoft Windows XP Professional. If I don't choose anything in the two seconds, it automatically chooses Microsoft Windows XP Professional, and boots up regularly,previously . I booted it and this message same up after the previous screen, asking me to choose a way in which to start up my machine from the following options:
Safe Mode, Safe Mode w/ Networking, Safe Mode w/ Command Prompt Last Known Good Configuration (your most recent settings that worked)Start Windows Normally No matter which I choose, I get this error message: Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select "r" at the first screen to start repair. I don't have the original Windows Setup Disk
My laptop has corrupted registry, every time I boot up the computer I get the following message "Windows could not start because the following file is missing or corrupt: WindowsSystem32ConfigSystem".Followed by a restart only to lead to the same problem. I get a message saying something about cannot find the directory, I have tested which directory it meant and found out that it is the c:windows epairsystem that it cannot find, it also is not hidden nor anything. The other commands have worked fine.
View 8 Replies View RelatedI've had with it, nor the first time this EXACT thing has happened before. my boot files get corrupt. First I was told that boot.dll or some such file is missing. I repaired that through the Windows XP CD Repair option, then ran a chkdsk /r. Next bootup I was told another .dll - something like hal.dll - is missing or corrupt, and when I fix that, I was told my system registry is corrupt. The following file is missing or corrupt: C:WINDOWSSystem32System.exe, after booting from the Windows XP CD, hit ENTER for setup and then R to repair existing installation. if I try to start WinXP normally a blue screen flashes, some sentences spring up and before I can begin to read them, the PC reboots.
View 3 Replies View RelatedWhile formatting my system i am facing a problem. the system is showing the following problem.
Windows could not start because the following file is missing or corrupt:
<windos root>system32dal.dll.Please re install a copy of above file
I have a workstation running XP Pro that displays the following error message.Windows could not start because the following file is missing or corrupt.Windows rootsystem32hal.dll. Please re-install a copy of the above file.I did get the machine to at least prompt me for OS choice, yet Windows 2000 Professional was the only OS option listed..
View 5 Replies View RelatedComputer is packed with spy-ware and viruses. I've been trying to clean it up and now I'm getting this message on start up. What should I do. The computer won't even start up. He is running a bootleg version of windows. And his setup disk doesn't seem to help. Windows could not start because the following file is either missing or corrupt. windowssystem32configsystem, You can attempt to repair this file by running windows setup using the originally setup CD-ROM. Select "r" at the first screen to start repair.
View 1 Replies View Related[I cannot boot up my server. After the boot loader phase, the server stops in the kernel load phase and issues the following error message: Windows 2000 could not start because the following file is missing or corrupt: <windows 2000 root>system32 toskrnl.exe I do not have any ERD (Emergency Rescue Disks) and when I use the original Windows Server CD, I got to the Recovery Console but wont work
View 3 Replies View RelatedXP PRO SP2- Recieve the following message upon unsuccessful boot attempt. "WINDOWS COULD NOT START BECAUSE THE FOLLOWING FILE IS MISSING OR CORRUPT: <WINDOWS ROOT> SYSTEM32HAL.DLL (not yelling ) I have tried to boot from my xp pro cd to utilize the recover utility however the computer will not boot from the cd. I able to use a dos boot disk however my keyboard is USB and I cannot find USB drivers to work under dos, so I was unable to do anything at that point. It was my hope that I could work through dos to edit the boot.ini file.
I do not want to reinstall windows. If I have to I will place the hard drive in another computer as a slave and work on it that way but I'd rather not. The only other tower type computer I have other then laptops is running xp home SP2.
I was playing Medieval II: Total War and the computer crashes. Then when I try to boot it up I get Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM. I've checked BIOS for the boot procedure, and everything seems to be in order. I then go through the regular procedure of putting in the CD to run the repair. I boot from the CD, it loads up fine... but there are no partitions and no option to enter the recovery console (which I've read so many wonderful things about).
So now I'm sort of stuck. There's no options other than install and delete the selected (none) partition. If I hit delete (b/c in anger sometimes I'm an idiot) it tells me it's a system partition and there could be VALUABLE system information like AN OS (I'm fuming at this point). NO... I did not delete it. If I hit install, I get a bunch of bogus about how "Setup cannot install to the selected partition.
I have a Dell Inspiron E1505 laptop with windows XP and when I turn it on, a black screen appears and in the upper left hand corner of the screen in white writing it says,Windows could not start because the following file is missing or corrupt:<Windows root>system32hal.dll.Please re-install a copy of the above file.
View 14 Replies View RelatedI have been searching for how to fix my son's computer which comes up with windows system32 config system - Windows could not start b/c the following file is missing or corrupt. He has a Dell and everything I've read seems to give warnings about doing recovery with a Dell. There was no OS CD with it.
View 14 Replies View RelatedI restarted my computer after installing an update to my firewall program. I get the "windows could not start because the following file is missing or corrupt: WindowsSystem32Hal.dll" I tried to do system restore first (F10) and it tried to start windows to start the system restore program I suppose and so of course the same error message came up. After retrying a few times, I tried the other option in system recovery (f10) and it said user data would be preserved but I may need to reinstall programs, so I thought that'd be fine. I let it do it's thing and came back later when it was done and it looked like the first time I started my computer ever where it has that cheesy music and asks you to name your computer, etc. So I'm finally in Windows again (XP Media Edition 2002 SP2) and the first thing I check is my documents folder and all my documents are gone! I checked the properties of the C: drive and it shows that I've used 224GB space, but I can't find my files anywhere. I've looked in all profiles in documents and settings. It seems like the files should be somewhere since the hard drive shows that I have that used space.
View 14 Replies View RelatedI have fixed this problem in the past in repair mode and i want to do the same with this, but, there is no filename at the end of the statement see below Windows could not start because the following file is corrupt or missing windowssystem32configsystem Can this be fixed in repair mode without having to be reformated or reimaged.
View 4 Replies View RelatedI am havinga very big problem with my PC. When I try to start it up normally, I get the following message; "Windows could not start because the following fileis missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM. You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select 'r' at the first screen to start repair" When I try this, it opens repair console, but then I have to select OS, and when I do this, it just comes up with the previous error. If I try to reinstall it comes up with a blue screen error and crashes.
View 7 Replies View RelatedMy Windows XP operating system crashed last night. When I try to turn on the computer I get a black screen that appears stating that Windows did not shut down properly and how would I like to restart the computer. There are then five options available to chose from (3 Safe Modes options, last known configuration, and normally). I have attempted all five with no good outcome.
I do get the following message: "Windows could not start because the following file is missing or corrupt: windowssystem32configsystem You can attempt to repair this file by starting Windows Set using the original Setup CD-ROM. Select 'r' at the first screen to start repair"....
My computer, a dell dimension 8400 with windows xp home edition, keeps coming up with an error saying:Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32Configsystem.i ran boot utility and scanned the computer and the drives come up fine with the test(except the hard disk which popped up errors on a constant.)
View 14 Replies View Relatedi have windows xp pro installed on my pc along with linux mandrake 10.1 and one day while my dad was surfing the net the sreen turned blue and some type of error message came up and it said to do something if it happend again but i ignored it becuase i thought it wouldnt happen again so i restarted and when it came back on it went to a black sceen and i couldnt do anything but if i let it wait there it would come up with an error saying that windowssystem32config system was missing or corrupt
View 5 Replies View Related