windows wont start up for me and i get the error message Windows could not start because the file is missing or corrupt: windowssystem32configsystem Also i dont have the repair install option under install windows), it just says installing two versions of windows is not recommended do you wish to continue. I went into the recovery console but really have no idea what to do there.
View 11 RepliesSo my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message....
Windows could not start because the following file is missing or corrupt:
windowssystem32configSYSTEM
Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair.
So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts.
I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
I have xp and when i start my cmputer i get this Windows could not start because the following file is missing or corrupt windowssystem32configsystem,I don't seam to be able to enter safe mode with f8 pressed.
View 1 Replies View RelatedI am having an issue with my computer obviously. I have a VPR Matrix desktop FT6100 computer. It has windows xp as its operating system. We had a huge storm here last Friday causing a total loss of power. Now, when I turn on the computer I am getting the following error message: Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM then it says please put in restore cd and press "r" for the repair menu. I put in my restore cd and the options were to just do the windows xp files, No Format or Quick Format. The first option the computer said was least destructive so I tried that route and brings me back to the same black screen w/ the same error msg. I went to microsoft.com to print off the instructions for the error msg and I can't even get to where the instructions are talking about. I don't want to lose all my files so I haven't touched the other 2 options on the restore cd. How can I fix this with my system?
View 1 Replies View RelatedWindows couldnt start because following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM. You can attempt to repair file by starting Windows Setup using the original Setup CD-ROM. Select?r? at the first screen to start repair. what do do? takes me to repair consol and then? i tried to fixboot.
View 2 Replies View RelatedI have an old computer with an Intel Celeron 467 MHz processor, 128 ram and I'm running Windows XP SP2. Earlier this week I came to turn on my computer, and could not log on to Windows. "Windows could not start because the follwing file is missing or corrupt Windowssystem32configsystem." I reinstalled XP. I couln't access the repair install. Then I thought maybe someone had gotten into my computer and I downloaded Zone Alarm...Big mistake. Since then my computer freezes, programs jam, I keep losing my internet connection,(DSL) and I get "cannot find server" messages. Its also slower as molasses in winter. A little better since the removal. Obviously Zone Alarm was removed and i went back to Windows firewall. I also use Ad-Aware, AVG, Spybot Search and Destroy, Spyware Blaster and I use Registry Mechanic and TuneUp Utilities.
View 14 Replies View RelatedMy Windows XP operating system crashed last night. When I try to turn on the computer I get a black screen that appears stating that Windows did not shut down properly and how would I like to restart the computer. There are then five options available to chose from (3 Safe Modes options, last known configuration, and normally). I have attempted all five with no good outcome.
I do get the following message: "Windows could not start because the following file is missing or corrupt: windowssystem32configsystem You can attempt to repair this file by starting Windows Set using the original Setup CD-ROM. Select 'r' at the first screen to start repair"....
I was recently given a compaq sr1330nx desktop computer that didn't work. After putting in a different power supply it started right up. It hadn't been used in over a year and I downloaded the 62 high priority updates needed and installed them. The next morning when I started it up it was very slow and unresponsive. I ran the error check utility and defragmented the hard drive. Still very slow and inconsistent. Then is when I probably screwed up and reset the 2 jumpers on the motherboard and went into the bios and checked "reset configuration". Now all I can get is a line of white bars across the bottom of a black screen and the message "windows could not start because the following file is missing or corrupt: C:windowssystem32configsystem. You can attemt to repair this file by starting windows setup using the original setup cd-rom. select 'r' at the first screen to start repair."
View 5 Replies View RelatedWhile formatting my system i am facing a problem. the system is showing the following problem.
Windows could not start because the following file is missing or corrupt:
<windos root>system32dal.dll.Please re install a copy of above file
I have a workstation running XP Pro that displays the following error message.Windows could not start because the following file is missing or corrupt.Windows rootsystem32hal.dll. Please re-install a copy of the above file.I did get the machine to at least prompt me for OS choice, yet Windows 2000 Professional was the only OS option listed..
View 5 Replies View RelatedI have been trying to fix this computer for quite a while. I am having some probs.
When I boot it up now, it comes up with an error
Quote: Windows could not start because the following file is missing or currupt.
WindowsSystem32Configsystem I do not want to reinstall Windows but IF I must I will. If there is a way to access the data I need some pictures off there.
I restarted my computer after installing an update to my firewall program. I get the "windows could not start because the following file is missing or corrupt: WindowsSystem32Hal.dll" I tried to do system restore first (F10) and it tried to start windows to start the system restore program I suppose and so of course the same error message came up. After retrying a few times, I tried the other option in system recovery (f10) and it said user data would be preserved but I may need to reinstall programs, so I thought that'd be fine. I let it do it's thing and came back later when it was done and it looked like the first time I started my computer ever where it has that cheesy music and asks you to name your computer, etc. So I'm finally in Windows again (XP Media Edition 2002 SP2) and the first thing I check is my documents folder and all my documents are gone! I checked the properties of the C: drive and it shows that I've used 224GB space, but I can't find my files anywhere. I've looked in all profiles in documents and settings. It seems like the files should be somewhere since the hard drive shows that I have that used space.
View 14 Replies View RelatedWhen I turn on comp. get the mssg: Windows couldn't start following file missing <Windows root>/system32/hal.dll Reinstall copy of file Recovery does not work. Tried to boot from a cd (changed BIOS to cd as 1st boot device) with win xp setup boot disk downloaded from MS site. Get same error mssg.
View 6 Replies View Relatedi turned on my pc i got the error XP Could not start, the following file is missing or corrupt:
I run Microsoft Windows home service pack 2Also, to complicate things, My computer is lacking a disk drive, so i only have access to USB ports.
I have fixed this problem in the past in repair mode and i want to do the same with this, but, there is no filename at the end of the statement see below Windows could not start because the following file is corrupt or missing windowssystem32configsystem Can this be fixed in repair mode without having to be reformated or reimaged.
View 4 Replies View RelatedI had problems right out of the gate...after typing out the first command line: tmpsystem.bak and hitting enter, I got the message that said could not find file...so I tried again and was extra diligent with my typing, but the same disappointing message came up.I decided to use some imagination and initiative and, started with the last command line first: tmpdefault.bak This worked for this line and then the next one too: tmpsecurity.bak and so on. When I got back to the tmpsystem.bak line, it even worked for that one too.
Then I moved on to the delete commands and that worked out OK...as far as I could tell?But, when I got to the repair lines and, in particular, the: repairsystem C:windowssystem32configsystem I then got the same message saying that the file could not be found...back to square one.Then I went back to the start...typing out the copy lines, and I got the same message for the system line again. So, I started from the default line again and it worked--I was asked if I wanted to re-write the first file copied and I chose Y (yes) then the same brick wall when I got to the system line.
I've just turned my notebook on this morning and a screen came up "Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM" It then tells me that I can fix the problem using the original Setup CD-ROM... The problem is, in the last couple of years that I've had it we've moved twice and are about to move again and I can't find it anywhere! And, I need the computer for work. Is there any way I can do this without the CD?
View 1 Replies View RelatedMy friend's comp isnt working it gets the following error during boot up
"Windows could not start because the following file is missing or corrupt:
WINDOWSSYSTEM32CONFIGSYSTEM"
I tried the windows support method to recovering from a corrupt registry..after I created a temp folder I entered the first copy line copy c:windowssystem32configsystems c:windows mpsystem.bak...it says that this file does not exist....any help would be greatly appreciated
I decided to uninstall COLDFUSION from my system I confirmed yes to all those popups that say "this file is no longer needed want to delete"? during the uninstall process. Turns out I wiped out some important .dlls that windows needs to start up correctly. I am hung up on a DOS screen that reads:
"Windows could not start because the following file is missing or corrupt: windows rootsystem32hal.dll Please re-install a copy of the above file. Where do I find the above dll and if its on the xp CD...where on the XP CD would it be?
my friend gave me this what i thought was a little virus through msn messanger. I thought i got rid of it but now my computer is telling me that i am missing a "windows file 32" is there anyway of getting it back or do i have to re-due my computer?
View 6 Replies View Relatedi turned on computer this morning and got an error message that said "windows.32.configuration is missing" What should i do?, the data on that computer is very important
View 1 Replies View Relatedwindows could not start because the following file is missing or corrupt:
/windows/system32/config/system
you can attempt to repair this file by starting windows setup using the original setup cd rom, select r at the first screen to start repair press 'r'
The problem is that this error already occurred and i cant access my windows at all. I have a mac computer with bootcamp (so it has both a mac and pc harddrives), the pc harddrive being the one that has this problem and that i cant access. Unfortunately, I do not have the original XP CD so that's probably not an option... Is there any way I can fix this problem without the CD, or is it absolutely necessary?
i have xp home edition cd but do not have oem recovery cd. Can get to recovery console but don't know what to do.
View 1 Replies View RelatedOn my other Windows XP, I cannot get windows to start or something.I start up the computer and I get to the log on screen and I log on.However, then a window pops up saying "wininet.dll" could not be found and explorer.exe couldn't load. Then my desktop does not show up and the start menu doesn't, and it's just my background.
View 3 Replies View RelatedI had a registry problem based on my description. JJ suggests repair using MS registry repair and rewriting software. Can I use the software if I can not boot up? Do I simply start the system with the repair software loaded in the drive? Emachine 4160, XP Home. Error message, " Windows could not start because the following file is missing or corrupt, WindowsSystem32ConfigSystem. I tried tapping F8 during startup to get to
Safe Mode, no luck. I can use the restore disc to reload but I want to save my wife's pictures on the exiting hard drive.
It worked fine for a few days, then I got this blue screen that said I have a system error and that I am missing a file or it is corrupt c:windowssystem32configsystem.Now, this was fine because I thought I knew the answer to this problem, which is incidentally the answer to another recent problem posted on this board, it can be found here:URL...I performed the operation, and again, it was all well and good for a few days.Then I got the same problem again. I used the same solution to make a fix.Then it happened again.So, my question is what's the problem? Do I have a hardware problem? I even used two different WinXp install discs to solve this problem on different occasions since I only needed the recovery console and I thought that the original disc might have become damaged or something.
View 13 Replies View RelatedWhen trying to turn on my computer i get the following message: Windows could not start because the following file is missing or corrupt: Windowssystem32configsystem You can attempts top repair this file by starting Windows Setup using the original Setup CD-ROM Select 'r' at the first screen to start repair. i have done endless searches on my desktop to try to find a step by step out of this problem. i have followed such things as: >>Problem: You turn off your computer one day and then go to restart to find an error message that says: Windows could not start because the following file is missing or corrupt C:windowssystem32configsystem You can attempt to repair this file by starting windows setup using the original setup CD-Rom. Select "r" at the first screen to start repair.
View 14 Replies View RelatedI shut down my laptop before I left last night and when I hope, my system didnt shut down all the way and there was a blue screen saying an error had occurred and if this was the first time I had seen the message to shut the ocmputer down and restart it.I did as instructed. When I powered it back up, I recieved a message saying Windows could not start because the following file is missing or corrupt:<Windows root"system32
toskrnl.exe. Please reinstall a copy of the above file.The problem is, I don't have the XP cd as my laptop came pre-installed. A friend suggested I go into the safe mode and do a system restore to the last saved date.
I think this is a major problem I did a system restore on my home pc and it went to the hardware screen showing NTLDR is missing, I assume its a windows file and although it says press cont+alt+del to restart, it doesnt work , can anyone help as I dont have a windows XP cd as it came already set up, also how on earth has it happened simply from doing a restore?
View 14 Replies View RelatedWell, I woke up this morning to turn on my computer, and I got an error like this. "windows could not start because the following file is missing or corrupt: windowssystem32configsystem. You can try repairing by using the original windows xp setup cd, press r on the first screen." Well, after scrounging for the xp cd, I put it in and booted from the cd, tried to do a repair install, but the repair option was not available. I could only install another copy of xp (onto the current copy) which I didn't want to do if it means that all my data is lost (I really don't want to lose them again!).I exited and googled up on why repair was not an option (I'm using my laptop btw), and some random dude told another guy with a similar problem to do chkdsk and bootcfg in recovery console. I went into recovery console and kind of played around with bootcfg, and I used the /rebuild function thinking it was repair, and then it asked me to type something and I was confused, so i entered "n" (for no). Well, basically now when I restart I have the option of booting up "Xp Home Edition" or "n", both of which lead to the missing file message, but how did I make two windows? And can I get rid of this "n" windows I made?
View 11 Replies View RelatedLast night, my PC started randomly restarting when I was copying files from a CD. It did it a few times, and I thought it may have just been overheating. However, now when I start my computer now, there is no BIOS and just a blank screen which is there for a good few mins. Then the loading bar (You know the one, White rectangles is all that's on the screen...just before windows loading screen) appears. However it only loads VERY slowly and when it gets to about an inch of the way in, I get a message telling me that a file is missing/corrupt and I can use the recovery console to fix it. Does anyone have any tips on how to use the console to repair this? I only want to reinstall windows as a very last resort. The file that is missing is: windowssystem32c_850.nls
View 8 Replies View Related