I think this is a major problem I did a system restore on my home pc and it went to the hardware screen showing NTLDR is missing, I assume its a windows file and although it says press cont+alt+del to restart, it doesnt work , can anyone help as I dont have a windows XP cd as it came already set up, also how on earth has it happened simply from doing a restore?
View 14 RepliesI have had the following error message appear when i start my PC NTLDR Missing, When i press ctl alt del to restart the same things happens and i go around in circles. I have put the XP disk in to hopefully boot from that but the PC will not pick up the disk and start from it. I have looked in the bios to change where the system is looking but still no joy, can anyone else point me in the right direction?.
View 14 Replies View RelatedIve been trying to install windows xp pro onto a compaq presario 5000 for the last 2 months but it doesnt want to go. i tried a flat out cd boot,
but i get an error "NTLDR file is missing" (never pressed a key when it said "Press any key to boot from cd"
I tried using the setup disks from microsoft at How to obtain Windows XP Setup boot disks
but right b4 the installation starts i get an error, "Value 0 in the setupsomethingorother file is corrupt or missing"
I tried to install windows xp pro from inside windows 2000 pro, but the stuff freezes the second i click install windows xp from the autorun menu's.
she just defaged and she then restarted and now it wont start it says NTLDR is missing press any key 2 restart and when you press a key it says the same thing over and over again. what do i do or will i need 2 reformat?
View 2 Replies View Relatedi booted up my other PC the other day and it wouldn't boot. i got the message 'missing NTLDR file press ctl-alt-del to reboot, and when i do the same message appears. i'm running a gen windows XP home OS.
View 5 Replies View RelatedI just now installed the KDE Cygwin (kde-cygwin)for Windows on my Win XP SP2 machine. However, upon restart I am now receiving the message "NTLDR Missing". I have tried following the instruction found on numerous forums and at computerhope.com but I continue to receive the same message every restart. This is what I have done so far: Restarted with the Win XP CD-ROM and went to the Recovery Console. Logged into my C: drive using the admin password. Copied "F:i386NTLDR" and "F:i386NTDETECT.com" to the root of my C drive. Ran "bootcfg /rebuild" and then "fixboot". After doing all of the above I restarted and am still met with the "NTLDR Missing" message. Again I booted back into the Recovery Console and checked to see what had been written into the boot.ini file using "bootcfg /list" and this is what I got:
[1] ""
OS Load Options:
OS Location: C:WINDOWS
Does this look right?? I tried typing the "fixmbr" command in and was met with the message, "This computer appears to have a non-standard or invalid master boot record." which was followed the threat that if I continued then I might lose all of the data on my drive, which is not an option for me. I am trying to avoid the need run a "repair installation" from the Win XP boot CD. That would require a lot of PITA work to update Windows back to SP2 and reinstall a bunch of other apps.
So my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message....
Windows could not start because the following file is missing or corrupt:
windowssystem32configSYSTEM
Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair.
So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts.
I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
I have fixed this problem in the past in repair mode and i want to do the same with this, but, there is no filename at the end of the statement see below Windows could not start because the following file is corrupt or missing windowssystem32configsystem Can this be fixed in repair mode without having to be reformated or reimaged.
View 4 Replies View RelatedI can't use my computer, because it freezes while starting up. All it says on the screen is "NTLDR Missing".
So what's wrong? Read on many sites (found through Google) that there's something wrong with my boot section of my hard disk or something. Just checking with the folks of Tom's Hardware to see if it's
On my other Windows XP, I cannot get windows to start or something.I start up the computer and I get to the log on screen and I log on.However, then a window pops up saying "wininet.dll" could not be found and explorer.exe couldn't load. Then my desktop does not show up and the start menu doesn't, and it's just my background.
View 3 Replies View RelatedI had a registry problem based on my description. JJ suggests repair using MS registry repair and rewriting software. Can I use the software if I can not boot up? Do I simply start the system with the repair software loaded in the drive? Emachine 4160, XP Home. Error message, " Windows could not start because the following file is missing or corrupt, WindowsSystem32ConfigSystem. I tried tapping F8 during startup to get to
Safe Mode, no luck. I can use the restore disc to reload but I want to save my wife's pictures on the exiting hard drive.
I initially had a problem with my xp which came up with a missing Hal.dll file and wouldnt boot. I tried using the xp recovery disc and eventually tried using Fixboot, thinking (foolishly?) that this is would help fix it. It now gives me a NTLDR error... Any suggestions as to how to fix this, have even tried slaving it externally but it only shows up a small completely empty drive at the moment, either 10mb or 10gb cant really remember,
View 14 Replies View RelatedI am trying to set up a new computer and am using a HD that I formatted with my other PC so it would be empty. I am trying to install windows on the HD and I get the error NTLDR is missing.
View 13 Replies View RelatedIm getting a new hard drive to replace one that failed. My OS is on the old drive but I want to move the OS to the new drive (b/c it will be clean and free of spyware and such...I want a clean install) when i recieve it. If i install the OS on the new one (which I will designate as the master drive), and i boot up, (then delete it from the old drive) will my computer get 'confused'? How should I go about doing this? I dont want to lose any of the data on the 'old' OS drive so I'm scared to remove Windows from it.
View 11 Replies View RelatedI deleted some base files on my C: the files were not in a folder just right on my root C:well i hit restart and now when my computer wont boot. it says."NTLDR is MISSING.. press CTRL + ALT + DEL to restart."well i went to this website.
View 13 Replies View RelatedMy son has phoned me. In spite of loads of precautions he is in trouble again.Three months ago his Mesh desktop gave him the thumbs down when his Maxtor 160Gb failed. he bought another and another copy of XP Home because he couldn't put his hand on the first one (money to burn).HD1 has been formatted and set upo with an installation of XP in reserve. His usual copy is on the new Maxtor, HD0. I understand that all of his data is held in separate partition and that he has a backup of his O/S using Acronis True Image v8, and a bootable rescue CD. Hid HD0 failed and he tried to format it to restore his backup. No go.Now he can't get his XP on HD1 to boot. His rescue CD won't boot.His True Image install disk which can be a rescue disk won't boot andall he gets on POST is "NTLDR is missing".
View 8 Replies View RelatedMy computer started this last night,after power beening off for a while.NTLDR is missing ctrl+alt+del to restart.I can't get my recovery disk to work,it quits after about 5 min.Sometimes the dvd burner won't open,so i can get it out.I gave up on it after a while.It so nerve racking.Hope someone can help me,its my kids computer.
View 14 Replies View RelatedWhen trying to turn on my computer i get the following message: Windows could not start because the following file is missing or corrupt: Windowssystem32configsystem You can attempts top repair this file by starting Windows Setup using the original Setup CD-ROM Select 'r' at the first screen to start repair. i have done endless searches on my desktop to try to find a step by step out of this problem. i have followed such things as: >>Problem: You turn off your computer one day and then go to restart to find an error message that says: Windows could not start because the following file is missing or corrupt C:windowssystem32configsystem You can attempt to repair this file by starting windows setup using the original setup CD-Rom. Select "r" at the first screen to start repair.
View 14 Replies View RelatedI shut down my laptop before I left last night and when I hope, my system didnt shut down all the way and there was a blue screen saying an error had occurred and if this was the first time I had seen the message to shut the ocmputer down and restart it.I did as instructed. When I powered it back up, I recieved a message saying Windows could not start because the following file is missing or corrupt:<Windows root"system32
toskrnl.exe. Please reinstall a copy of the above file.The problem is, I don't have the XP cd as my laptop came pre-installed. A friend suggested I go into the safe mode and do a system restore to the last saved date.
I was recently given a compaq sr1330nx desktop computer that didn't work. After putting in a different power supply it started right up. It hadn't been used in over a year and I downloaded the 62 high priority updates needed and installed them. The next morning when I started it up it was very slow and unresponsive. I ran the error check utility and defragmented the hard drive. Still very slow and inconsistent. Then is when I probably screwed up and reset the 2 jumpers on the motherboard and went into the bios and checked "reset configuration". Now all I can get is a line of white bars across the bottom of a black screen and the message "windows could not start because the following file is missing or corrupt: C:windowssystem32configsystem. You can attemt to repair this file by starting windows setup using the original setup cd-rom. select 'r' at the first screen to start repair."
View 5 Replies View RelatedWell, I woke up this morning to turn on my computer, and I got an error like this. "windows could not start because the following file is missing or corrupt: windowssystem32configsystem. You can try repairing by using the original windows xp setup cd, press r on the first screen." Well, after scrounging for the xp cd, I put it in and booted from the cd, tried to do a repair install, but the repair option was not available. I could only install another copy of xp (onto the current copy) which I didn't want to do if it means that all my data is lost (I really don't want to lose them again!).I exited and googled up on why repair was not an option (I'm using my laptop btw), and some random dude told another guy with a similar problem to do chkdsk and bootcfg in recovery console. I went into recovery console and kind of played around with bootcfg, and I used the /rebuild function thinking it was repair, and then it asked me to type something and I was confused, so i entered "n" (for no). Well, basically now when I restart I have the option of booting up "Xp Home Edition" or "n", both of which lead to the missing file message, but how did I make two windows? And can I get rid of this "n" windows I made?
View 11 Replies View RelatedLast night, my PC started randomly restarting when I was copying files from a CD. It did it a few times, and I thought it may have just been overheating. However, now when I start my computer now, there is no BIOS and just a blank screen which is there for a good few mins. Then the loading bar (You know the one, White rectangles is all that's on the screen...just before windows loading screen) appears. However it only loads VERY slowly and when it gets to about an inch of the way in, I get a message telling me that a file is missing/corrupt and I can use the recovery console to fix it. Does anyone have any tips on how to use the console to repair this? I only want to reinstall windows as a very last resort. The file that is missing is: windowssystem32c_850.nls
View 8 Replies View RelatedI recently reinstalled XP Pro on my computer. There's usually no problems but now after the install, if I set the bios to boot from my hard drive I get the message NTLDR (or something near) Is missing press ctrl alt del to reboot. I do this and the same thing happens.
However, if Iset it to boot from CD and then ignore the "press any key to boot from CD" MEssage it then skips and boots files
Computer is an HP pavilion notebook zd7000. XP Pro. HP recovery does not seem to be an option on this notebook. I did have this pc in for repair once before as user loves to download music, etc.. and I do remember having to load format and load from the xp cd.
View 7 Replies View RelatedI just built a new pc started installing xp it was almost finished formatting the drive I walked away and pc was off now it keeps coming up missing NTLDR please push cntrl,alt,delete to reset. I reset and can get to bios but can't get anything else to happen when i try to start the pc
View 6 Replies View RelatedWhile formatting my system i am facing a problem. the system is showing the following problem.
Windows could not start because the following file is missing or corrupt:
<windos root>system32dal.dll.Please re install a copy of above file
I have a workstation running XP Pro that displays the following error message.Windows could not start because the following file is missing or corrupt.Windows rootsystem32hal.dll. Please re-install a copy of the above file.I did get the machine to at least prompt me for OS choice, yet Windows 2000 Professional was the only OS option listed..
View 5 Replies View RelatedComputer is packed with spy-ware and viruses. I've been trying to clean it up and now I'm getting this message on start up. What should I do. The computer won't even start up. He is running a bootleg version of windows. And his setup disk doesn't seem to help. Windows could not start because the following file is either missing or corrupt. windowssystem32configsystem, You can attempt to repair this file by running windows setup using the originally setup CD-ROM. Select "r" at the first screen to start repair.
View 1 Replies View RelatedI am trying to fix a friend's computer. When starting up, I get the following error message:Windows could not start because the following file is missing or corrupt:
WINDOWS\SYSTEM32\CONFIG\SYSTEM
but I got an error that c:windowssystem32configsystem could not be copied because it could not be found. The computer has Windows XP SP2.
XP PRO SP2- Recieve the following message upon unsuccessful boot attempt. "WINDOWS COULD NOT START BECAUSE THE FOLLOWING FILE IS MISSING OR CORRUPT: <WINDOWS ROOT> SYSTEM32HAL.DLL (not yelling ) I have tried to boot from my xp pro cd to utilize the recover utility however the computer will not boot from the cd. I able to use a dos boot disk however my keyboard is USB and I cannot find USB drivers to work under dos, so I was unable to do anything at that point. It was my hope that I could work through dos to edit the boot.ini file.
I do not want to reinstall windows. If I have to I will place the hard drive in another computer as a slave and work on it that way but I'd rather not. The only other tower type computer I have other then laptops is running xp home SP2.
After loading an updated version of QuickBooks today, I attempted to restart my computer and received this error message: Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEMS32CONFIGSYSTEM. Attempted "typical recovery methods", then inserted Reinstallation CD for Windows XP Professional (SP2) that came with DELL computer (pre-installed). Followed steps to "Welcome to Setup" blue screen. Pressed r to repair. Followed steps to chkdsk /r command. Process began. After process reached 38%, there was no more activity---for almost 1.5 hours. Seemed frozen. Turned off computer. Tried, unsucessfully, to follow Microsoft instructions found online. At the Recovery Console command prompt, created 'md tmp', then attempted to "copy c:", etc. Each time I entered a "copy c:" line, I was given the message: "Cannot copy...". Not sure if this is happening because I have a DELL disk, rather than original Windows XP disk?If so, any way around this?
View 8 Replies View Related