I can't use my computer, because it freezes while starting up. All it says on the screen is "NTLDR Missing".
So what's wrong? Read on many sites (found through Google) that there's something wrong with my boot section of my hard disk or something. Just checking with the folks of Tom's Hardware to see if it's
I have had the following error message appear when i start my PC NTLDR Missing, When i press ctl alt del to restart the same things happens and i go around in circles. I have put the XP disk in to hopefully boot from that but the PC will not pick up the disk and start from it. I have looked in the bios to change where the system is looking but still no joy, can anyone else point me in the right direction?.
View 14 Replies View RelatedI think this is a major problem I did a system restore on my home pc and it went to the hardware screen showing NTLDR is missing, I assume its a windows file and although it says press cont+alt+del to restart, it doesnt work , can anyone help as I dont have a windows XP cd as it came already set up, also how on earth has it happened simply from doing a restore?
View 14 Replies View Related"missing NTLDR" viruses an my PC with XP Home. I am trying to do a clean install of XP Pro. I boot to the CD and it starts checking the configurations. I then get a screen asking for me to insert the CD in Drive "A". It won't read the CD no matter what I do. The PC only has the DVD/CD-rom and the hard drive.
View 8 Replies View RelatedIt all started when i installed a fax modem on my computer. After installing it and restarting the computer the black screen came up with the run normal, safe mode and so on. I tried all of them and nothing worked. So i got a boot cd off the internet and tried using that but did not know what i was doing or how to use it. I tried running a couple things but nothing worked i probably just made it worse. So now when i try load windows a NTLDR is missing error comes up. Has anyone seen this before? Any help would be great i do not have original xp cd but i have a boot cd that may work if i knew how to use it.
View 14 Replies View Relatedcomputer that has two hard drives and a different os on both hard drives. 1 Drive has windows 2000 pro, and the other has xp home. It was configured so that on boot up, there would be a choice of which operating system to boot into, though I do not know which drive was giving this choice. At this point when I boot, I get the error message "ntldr is missing press any key to restart". I have changed the boot order in the bios to see if it will boot from the other hard drive, and I get the same results.
View 4 Replies View RelatedI initially had a problem with my xp which came up with a missing Hal.dll file and wouldnt boot. I tried using the xp recovery disc and eventually tried using Fixboot, thinking (foolishly?) that this is would help fix it. It now gives me a NTLDR error... Any suggestions as to how to fix this, have even tried slaving it externally but it only shows up a small completely empty drive at the moment, either 10mb or 10gb cant really remember,
View 14 Replies View RelatedI am trying to set up a new computer and am using a HD that I formatted with my other PC so it would be empty. I am trying to install windows on the HD and I get the error NTLDR is missing.
View 13 Replies View RelatedIm getting a new hard drive to replace one that failed. My OS is on the old drive but I want to move the OS to the new drive (b/c it will be clean and free of spyware and such...I want a clean install) when i recieve it. If i install the OS on the new one (which I will designate as the master drive), and i boot up, (then delete it from the old drive) will my computer get 'confused'? How should I go about doing this? I dont want to lose any of the data on the 'old' OS drive so I'm scared to remove Windows from it.
View 11 Replies View RelatedI deleted some base files on my C: the files were not in a folder just right on my root C:well i hit restart and now when my computer wont boot. it says."NTLDR is MISSING.. press CTRL + ALT + DEL to restart."well i went to this website.
View 13 Replies View RelatedMy son has phoned me. In spite of loads of precautions he is in trouble again.Three months ago his Mesh desktop gave him the thumbs down when his Maxtor 160Gb failed. he bought another and another copy of XP Home because he couldn't put his hand on the first one (money to burn).HD1 has been formatted and set upo with an installation of XP in reserve. His usual copy is on the new Maxtor, HD0. I understand that all of his data is held in separate partition and that he has a backup of his O/S using Acronis True Image v8, and a bootable rescue CD. Hid HD0 failed and he tried to format it to restore his backup. No go.Now he can't get his XP on HD1 to boot. His rescue CD won't boot.His True Image install disk which can be a rescue disk won't boot andall he gets on POST is "NTLDR is missing".
View 8 Replies View RelatedMy computer started this last night,after power beening off for a while.NTLDR is missing ctrl+alt+del to restart.I can't get my recovery disk to work,it quits after about 5 min.Sometimes the dvd burner won't open,so i can get it out.I gave up on it after a while.It so nerve racking.Hope someone can help me,its my kids computer.
View 14 Replies View RelatedI recently reinstalled XP Pro on my computer. There's usually no problems but now after the install, if I set the bios to boot from my hard drive I get the message NTLDR (or something near) Is missing press ctrl alt del to reboot. I do this and the same thing happens.
However, if Iset it to boot from CD and then ignore the "press any key to boot from CD" MEssage it then skips and boots files
Computer is an HP pavilion notebook zd7000. XP Pro. HP recovery does not seem to be an option on this notebook. I did have this pc in for repair once before as user loves to download music, etc.. and I do remember having to load format and load from the xp cd.
View 7 Replies View RelatedI just built a new pc started installing xp it was almost finished formatting the drive I walked away and pc was off now it keeps coming up missing NTLDR please push cntrl,alt,delete to reset. I reset and can get to bios but can't get anything else to happen when i try to start the pc
View 6 Replies View RelatedI was getting the message "ntldr is missing-press any key to restart". I was able to fix that through trail and error. After I restarted my computer I got the message "disc error". Would someone be able to help out. I am running Windows XP.
View 3 Replies View RelatedI have an older laptop in which the hard drive and broken on, I was hoping to fix it so that my in-laws could use it to keep in touch with family via Skype. So...I purchsed a new 20gb hard drive and fitted it yesterday. The laptop booted up ok but after the Bios screen displayed an error message of "ntldr is missing press ctrl, alt, delete to restart" When I rebooted with my Windows XP cd in it's gets just past the Bios screen and then displays some errors in French! The jist of these errors I think is that the boot.ini file could not be found. I tried to reboot but I still get another error message in french! From what I can see it does not say anything about boot.ini this time though. I have also tried a XP Recovery Console Repair to no avail either and have exhausted everything I know. what I need to do to install XP onto this HDD (it has been formatted too)? Any explanation on why the messages are in French? Also one thing to mention is that when I manage to boot with XP Live CD and use Command Prompt the letters I type on the keyboard come out all wrong ie. : comes out as * and m comes out as 0
View 9 Replies View RelatedI have taken a hitachi hdd that had xp home on it, put it solo in a machine (cuz it is larger tryin' to upgrade) that had been using & working perfectly fine with 2k pro. got a missing os error. read dozens more. own full store bought version of the afore mentioned xp. tried to boot from cd, does NOT appear to even recognize anything is in the drive. went into bios made sure cd was 1st boot, still "missin os" still doesn't see cd in drive. here is where i would like some more detail pleez, mind you i'm a beginner, yet have a keen interest in computers. now i read that computers don't like swaps of os too hot, so i pulled the xp hdd back out of the 2k machine set it up as slave in the machine i'm using now (it's actual "birth" machine) & formatted it, then deleted it from the drivers before removing it. put it back in the rig that runs 2k, now the error states "NTLDR is missing". by the way i corrected the jumpers both swaps. tried the cd again still ntlrd error. went into bios, confirmed recognition of hdd, yep pretty as a picture. does'nt formatting wipe the thing clean (for my intent & purpose)? i have to be missing a step here, i mean why won't the thing read the cd? the cd rom works, i read something about possibly not being able to boot from it though!?
View 5 Replies View RelatedEverything was fine last night when i was on my computer but when i woke up this morning and booted her up i recieved the "NTLDR is missing" error message with instructions to use control+alt+delete to restart and try again. I have not recently installed any new hardware or changed configurations and the only new software is Diablo2 and its expansion which has been on my computer for a week now (its run fine in the past and never caused any problems). I've been reading through the forums for most of the day and tried several different suggestions to fix my problem but to no avail. I've tried using a boot disk i made off of a friend's computer, rebuilding the boot record using the recovery console, and i even tried that NTLDR "fixer" disk that i downloaded from a link i frequently see posted. Nothing has worked. The only interesting thing is that when i use that fixer program (the one that gives you 10 boot options and you have to go through every one to find one that works) is that instead of getting a missing NTLDR message, i get a hal.dll error instead! So i go back into my XP cd and expand the hal.dll into the system32 folder on my drive and try again but now i'm back to the NTLDR error!
I really dont know what to do here and any help is appreciated! Also, i'm not tp sure how vital this is but my drive is labeled D: although it is the only HDD in my computer, when i try to use the recovery console i only have one option for an OS to explore and it is labeled C:. I'm not sure if how this happened is important to my current situation but i can explain it if necessary. Again, any suggestions here would be a big help and hope to hear from you soon. Oh, formating is also out of the quesion as i have no backups of my current papers, projects, and other data.
I was on my computer yesterday when there was a power surge. My operating system is windows XP. Since this happened my computer won't restart properly, I get this message:
NTLDR is missing press ctrl + alt + del to restart I have done some research to figure out.
Evening all I am attempting to create a boot CD slipstreaming SP2. I have an original XP cd and I need to integrate SP2 into it so it will recognize my new Seagate 1T HD. After following all the instructions from http://www.helpwithwindows.com/Win [...] ootcd.html using IsoBuster and CDBurnerXP when I attempt to boot to the CD it says the NTLDR is missing. I open the CD (on another pc) and confirmed the file contained the ntdet and ntldr. I am not good with this type of stuff and am looking for some suggestions on what I should do at this point. My ultimate goal is to simply load XP on my new 1T hard drive.
View 4 Replies View RelatedI know there is already a thread out there for this error. However, it is not solving my problem. My 160 Western Digital HDD is brand new. After the very first partition, OS install, and boot the system went to the "Windows is starting set up" blue screen. It hung up there. 10 minutes later I shut off the system and tried to boot from the HDD. This yielded the NTLDR error. Repartitioning with XP and reinstalling the OS ON A DIFFERENT COMPUTER worked. Hooking it up to my computer and booting from the HHD resulted in an "Operating system is missing error". Re-booting from the XP CD took me to the "Windows is starting set up" blue screen. a few seconds later the screen went blank. No windows start up screen, nothing I Can't get to the recovery console.
View 24 Replies View RelatedMy moms computer had a big red X next to the C: Drive, so I ran AVG and it wouldnt work it just froze up. So I did some poking around online and found Vundo. So I ran it and it found a bunch of stuff and then deleted it all. Then when I restarted the PC I get the "NTLDR is missing, Press ctrl-alt-delete to restart" error message. So I found out how to fix that with a boot disk. Here comes problem number one. the recovery disk is HP Windows XP sp2. Im not sure if the OS is the same because the disk is from my laptop. (both are HP windows xp) So I put in the disk, hit ctrl-alt-del and press enter to boot from disk. Everything looks normal, it says windows setup, and is loading files at the bottom of the screen. At the welcome screen I press R and am taken to the recovery console. This is where it gets weird.
View 14 Replies View RelatedMy buddy uses his computer, well his wife does for avon and stuff and she is having a fit so he called me. anyway he said the kids won't admit it but I don't know what they did blah, blah, blah I told him to calm down I would see what could find out for him. The computer turns on but comes up to a black screen and has the message
NTLDR is missing
press Ctrl+Alt+Del to restart.
Right after Windows XP security update yesterday 1/21/2010 I found my computer was off. This was normal after an windows update. So I turned my computer back on and received an error message of "NTLDR is missing". After trying twice to re-boot, with the same error, upon checking my startup BIOS file I found the BIOS record had been altered to boot using the wrong hard disk.
View 3 Replies View Relatedi Bought a new Motherboard, processor and power supply and then used the rest of what i already had and built the computer. i booted up and it starts goin through the P.O.S.T and gets to the bit where it say about DMI Pool Varifing (or something like that) and then says NTLDR is Missing Pres Cnrl, Alt, Del to Restart. iv tried booting from cd with windows in to reformat, but still says the same.
View 7 Replies View RelatedBooting up a Dell Dimension 9100. It has been working fine for 2 weeks since reformatting. Today, I tried to boot the machine and it gave the ntldr missing error message but it was in french. I put the install disk in and ran the fixboot and chkdsk utilities from command line. It booted up and ran fine. I shut down and tried to reboot again and the error message appeared again. Corrupt bios? I plan on updating the bios tomorrow and trying that. I have never seen a bios error message appear in French. Has anyone ever seen this before?
View 6 Replies View RelatedIve been trying to install windows xp pro onto a compaq presario 5000 for the last 2 months but it doesnt want to go. i tried a flat out cd boot,
but i get an error "NTLDR file is missing" (never pressed a key when it said "Press any key to boot from cd"
I tried using the setup disks from microsoft at How to obtain Windows XP Setup boot disks
but right b4 the installation starts i get an error, "Value 0 in the setupsomethingorother file is corrupt or missing"
I tried to install windows xp pro from inside windows 2000 pro, but the stuff freezes the second i click install windows xp from the autorun menu's.
It started with the NTLDR is missing error,so I load the recovery console and prepare to copy it to the drive when I notice ALL the boot files are missing, in fact every file on the root of C drive is gone.So I make a boot disk from my lap top copy the boot files to the disk and give this a try. Boots fine and seems to run perfect. Copy the boot files to the C drive, reboot numerous times, all good so I go home, leaving him the boot disk and showing him what to do just in case.
Next day same thing, What we seem to have determined is that the files seem to disappear later in the evening. I had him run all the pgms he normally does for a good while, quit the pgm and check C. The files are still there. after a few hours of fooling around he leaves PC on and goes watch TV. Comes back about 11:00pm to turn off PC, checks C drive and they're gone again. He re copies the files, shuts down and goes to bed.Next day PC boots fines before work, after work etc... BUT some time later in the evening it happens again.
i keep getting the error when i turn on the computer. and i have no access to anything does anyone know how to resolve this isssue the only thing i can access is the bios.
View 4 Replies View Relatedshe just defaged and she then restarted and now it wont start it says NTLDR is missing press any key 2 restart and when you press a key it says the same thing over and over again. what do i do or will i need 2 reformat?
View 2 Replies View Related