After Installing And Restarting Computer The Black Screen - NTLDR Missing
Apr 29, 2007
It all started when i installed a fax modem on my computer. After installing it and restarting the computer the black screen came up with the run normal, safe mode and so on. I tried all of them and nothing worked. So i got a boot cd off the internet and tried using that but did not know what i was doing or how to use it. I tried running a couple things but nothing worked i probably just made it worse. So now when i try load windows a NTLDR is missing error comes up. Has anyone seen this before? Any help would be great i do not have original xp cd but i have a boot cd that may work if i knew how to use it.
View 14 Replies
ADVERTISEMENT
Feb 22, 2008
my friends pc needs a re-install of Windows XP, i did it. BUT the computer casing doesn't have his product key for it on a sticker like most do i can't get into windows i get the usual loading black screen with NTLDR Missing press Ctrl+alt+del to restart.... so i can't get into xp to use magical jelly beans 'keyfinder' to get the last product key used on his computer.... i don't wanna use my product key incase it screws up... i don't wanna un-install windows on his computer as i won't be able to re-install it without the product key.
View 5 Replies
View Related
Feb 5, 2006
My Windows XP operating system crashed last night. When I try to turn on the computer I get a black screen that appears stating that Windows did not shut down properly and how would I like to restart the computer. There are then five options available to chose from (3 Safe Modes options, last known configuration, and normally). I have attempted all five with no good outcome.
I do get the following message: "Windows could not start because the following file is missing or corrupt: windowssystem32configsystem You can attempt to repair this file by starting Windows Set using the original Setup CD-ROM. Select 'r' at the first screen to start repair"....
View 14 Replies
View Related
Dec 30, 2004
I know there is already a thread out there for this error. However, it is not solving my problem. My 160 Western Digital HDD is brand new. After the very first partition, OS install, and boot the system went to the "Windows is starting set up" blue screen. It hung up there. 10 minutes later I shut off the system and tried to boot from the HDD. This yielded the NTLDR error. Repartitioning with XP and reinstalling the OS ON A DIFFERENT COMPUTER worked. Hooking it up to my computer and booting from the HHD resulted in an "Operating system is missing error". Re-booting from the XP CD took me to the "Windows is starting set up" blue screen. a few seconds later the screen went blank. No windows start up screen, nothing I Can't get to the recovery console.
View 24 Replies
View Related
Jan 16, 2008
"missing NTLDR" viruses an my PC with XP Home. I am trying to do a clean install of XP Pro. I boot to the CD and it starts checking the configurations. I then get a screen asking for me to insert the CD in Drive "A". It won't read the CD no matter what I do. The PC only has the DVD/CD-rom and the hard drive.
View 8 Replies
View Related
Feb 23, 2006
I was trying to reinstall windows xp home editon because my computer was infected with a virus that could not be deleted even after trying norotn and mcafee. The CD-Rom drives were deleted from the virus,so I had to transfer the xp cd files from one computer to the infected computer through a direct transfer cable During the xp installation, the computer hung and showed a black screen when installing the devices. Now everytime I start the computer up it goes straght into setup and shows a black screen.The CD-Rom drives do not work pressing delete during start-up will not access the BIOS.It seems I cannot flash the BIOS.How do I cancel the xp setup?
View 2 Replies
View Related
Jun 6, 2006
When I am starting my PC I am having a black screen with words as follows:
Windows could not start because the following file is missing or corrupted:
<Windows>system32hal.dll.
Please reinstall a copy of the above file.
View 2 Replies
View Related
May 8, 2006
My brother attempted to install Windows Media Center on his computer, the computer then restarted and now keeps restarting right after the first screen,the "PRESS DEL TO ENTER SETUP" one with the energy saver icon.
I tried to enter safe mode, all I got was the same restarting, even in safe mode. It seems Windows cannot load up
View 1 Replies
View Related
Sep 13, 2005
PC apparently crashed while I was gone. Black screen, says need to reload missing or corrupt hal.dll Cannot reboot into safe mode, no last known good point to return to. This is the only screen I can get, other than setup for bios - which can still see the hard drive and installed peripherals. Don't have a floppy drive,
although I'll be getting one soon, in order to try a boot to that.
View 6 Replies
View Related
Oct 13, 2005
computer that has two hard drives and a different os on both hard drives. 1 Drive has windows 2000 pro, and the other has xp home. It was configured so that on boot up, there would be a choice of which operating system to boot into, though I do not know which drive was giving this choice. At this point when I boot, I get the error message "ntldr is missing press any key to restart". I have changed the boot order in the bios to see if it will boot from the other hard drive, and I get the same results.
View 4 Replies
View Related
Dec 22, 2004
Every time I start my computer and I logg in,my floppy drive's light turnes on and it sounds like it tryes to read something.This is allways supposed to happen.But a few days ago it was doing that and then everytime it did that there was a 1 second blue screen with some writing on it.It looked like some error message.Than the computer restarted it's self.
View 14 Replies
View Related
Apr 22, 2009
I can't use my computer, because it freezes while starting up. All it says on the screen is "NTLDR Missing".
So what's wrong? Read on many sites (found through Google) that there's something wrong with my boot section of my hard disk or something. Just checking with the folks of Tom's Hardware to see if it's
View 4 Replies
View Related
Mar 16, 2007
So after having an extremely long battle with my computer repeatedly restarting and restarting and restarting I got the BLUE error screen. I copied down the errors on a piece of paper and they are: STOP: 0x0000008E (0x00000005, 0x0004210B, 0xB004EC8C, 0x00000000).
I tried google'ing these codes but wasn't able to figure out what they were trying to say. I'm not sure what to do at this point Some background information. For a while now everytime I turn on my computer it will continually restart at different intervals until all of a sudden it just sticks and stays on and at that point it will work for hours on hours. However the restarting issue occurs EVERY time I start the computer. It usually stops restarting itself and works fine after about 10 minutes.
I ran MemTest86+ and found no errors. I switched out my PSU with a more powerful one (though my cousin thinks that one may be bad as well) but I don't have any extras and don't have a power supply tester laying around... I'm not sure how to check if it is my OS or possibly my board... I also don't have any extra parts
View 7 Replies
View Related
Jul 15, 2007
my computer would give me a few problems while booting up. I would start the computer, it would run through BIOS, run through the Windows loading screen, and after that it would run the CHKDSK to make sure my disks are fine. CHKDSK doesn't work, it just freezes right before checking the disks, so I restart and generally it will boot up. Most of the time it would boot up perfectly, but rarely would it go to the xp loading screen and then flicker as if it as going to go to the windows login screen but wouldn't. The screen would just stay black and I'd have to restart.
Next time, generally it would work perfect.So this brings me to the current day. After the windows xp loading screen, it goes black. The computer is on, but I don't see any activity for the HDD via the LED. SO i go into safe mode, i finally get CHKDSK to run, I had to really mess with some stuff to get that working. Windows says the volume is fine, and the only way I can boot my PC is in safe mode, but even that will freeze sometimes while loading some of the files.
View 14 Replies
View Related
Feb 14, 2009
I initially had a problem with my xp which came up with a missing Hal.dll file and wouldnt boot. I tried using the xp recovery disc and eventually tried using Fixboot, thinking (foolishly?) that this is would help fix it. It now gives me a NTLDR error... Any suggestions as to how to fix this, have even tried slaving it externally but it only shows up a small completely empty drive at the moment, either 10mb or 10gb cant really remember,
View 14 Replies
View Related
Mar 11, 2008
I am trying to set up a new computer and am using a HD that I formatted with my other PC so it would be empty. I am trying to install windows on the HD and I get the error NTLDR is missing.
View 13 Replies
View Related
Nov 30, 2004
Im getting a new hard drive to replace one that failed. My OS is on the old drive but I want to move the OS to the new drive (b/c it will be clean and free of spyware and such...I want a clean install) when i recieve it. If i install the OS on the new one (which I will designate as the master drive), and i boot up, (then delete it from the old drive) will my computer get 'confused'? How should I go about doing this? I dont want to lose any of the data on the 'old' OS drive so I'm scared to remove Windows from it.
View 11 Replies
View Related
Jan 26, 2006
I deleted some base files on my C: the files were not in a folder just right on my root C:well i hit restart and now when my computer wont boot. it says."NTLDR is MISSING.. press CTRL + ALT + DEL to restart."well i went to this website.
View 13 Replies
View Related
Jul 5, 2005
My son has phoned me. In spite of loads of precautions he is in trouble again.Three months ago his Mesh desktop gave him the thumbs down when his Maxtor 160Gb failed. he bought another and another copy of XP Home because he couldn't put his hand on the first one (money to burn).HD1 has been formatted and set upo with an installation of XP in reserve. His usual copy is on the new Maxtor, HD0. I understand that all of his data is held in separate partition and that he has a backup of his O/S using Acronis True Image v8, and a bootable rescue CD. Hid HD0 failed and he tried to format it to restore his backup. No go.Now he can't get his XP on HD1 to boot. His rescue CD won't boot.His True Image install disk which can be a rescue disk won't boot andall he gets on POST is "NTLDR is missing".
View 8 Replies
View Related
Oct 9, 2006
My computer started this last night,after power beening off for a while.NTLDR is missing ctrl+alt+del to restart.I can't get my recovery disk to work,it quits after about 5 min.Sometimes the dvd burner won't open,so i can get it out.I gave up on it after a while.It so nerve racking.Hope someone can help me,its my kids computer.
View 14 Replies
View Related
Jan 14, 2006
I recently reinstalled XP Pro on my computer. There's usually no problems but now after the install, if I set the bios to boot from my hard drive I get the message NTLDR (or something near) Is missing press ctrl alt del to reboot. I do this and the same thing happens.
However, if Iset it to boot from CD and then ignore the "press any key to boot from CD" MEssage it then skips and boots files
View 3 Replies
View Related
Jun 9, 2005
Computer is an HP pavilion notebook zd7000. XP Pro. HP recovery does not seem to be an option on this notebook. I did have this pc in for repair once before as user loves to download music, etc.. and I do remember having to load format and load from the xp cd.
View 7 Replies
View Related
Apr 9, 2008
I have had the following error message appear when i start my PC NTLDR Missing, When i press ctl alt del to restart the same things happens and i go around in circles. I have put the XP disk in to hopefully boot from that but the PC will not pick up the disk and start from it. I have looked in the bios to change where the system is looking but still no joy, can anyone else point me in the right direction?.
View 14 Replies
View Related
Apr 11, 2005
I just built a new pc started installing xp it was almost finished formatting the drive I walked away and pc was off now it keeps coming up missing NTLDR please push cntrl,alt,delete to reset. I reset and can get to bios but can't get anything else to happen when i try to start the pc
View 6 Replies
View Related
May 19, 2008
After I used Fix-it Utlilies the program erased essential system folders. So now when I do check disk it reboots, flashes a blue screen real fast (so fast I can't even read it) then restarts the computer, restarts check disk, restarts the computer, and on & on. It won't stop doing this till I interrupt check disk at the start by hitting any key but then I end up with a black screen with instructions which include safe mode, safe mode with networking, start windows normally & last known configuration
I can't boot from an installation CD to do a "repair" since Windows was preinstalled in the drive so I have NO CD. Does system recovery work?, who knows, I'm a noob and have no idea how to use it. The only thing I've tried to fix it was 2 things : 1) use system restore which failed; 2) use run> sfc /scannow but this file checker is also broken and will barely start before it errors and stops. I don't know what else to do besides reformat
View 3 Replies
View Related
Feb 23, 2005
After my computer is on for approx 15 min. the screen goes black. After I reset/reboot it comes on and runs ok the rest of the day.The next morning when I turn it on it's the same thing to do over.I've run all my virus programs and can't find anything.the computer power indicator never goes out. I push the switch to reset, computer comes on and runs normally the rest of day.Looks like I still have a virus/bug somewhere.
View 9 Replies
View Related
Aug 6, 2007
I was getting the message "ntldr is missing-press any key to restart". I was able to fix that through trail and error. After I restarted my computer I got the message "disc error". Would someone be able to help out. I am running Windows XP.
View 3 Replies
View Related
Mar 11, 2010
I have an older laptop in which the hard drive and broken on, I was hoping to fix it so that my in-laws could use it to keep in touch with family via Skype. So...I purchsed a new 20gb hard drive and fitted it yesterday. The laptop booted up ok but after the Bios screen displayed an error message of "ntldr is missing press ctrl, alt, delete to restart" When I rebooted with my Windows XP cd in it's gets just past the Bios screen and then displays some errors in French! The jist of these errors I think is that the boot.ini file could not be found. I tried to reboot but I still get another error message in french! From what I can see it does not say anything about boot.ini this time though. I have also tried a XP Recovery Console Repair to no avail either and have exhausted everything I know. what I need to do to install XP onto this HDD (it has been formatted too)? Any explanation on why the messages are in French? Also one thing to mention is that when I manage to boot with XP Live CD and use Command Prompt the letters I type on the keyboard come out all wrong ie. : comes out as * and m comes out as 0
View 9 Replies
View Related
Jan 28, 2008
I have taken a hitachi hdd that had xp home on it, put it solo in a machine (cuz it is larger tryin' to upgrade) that had been using & working perfectly fine with 2k pro. got a missing os error. read dozens more. own full store bought version of the afore mentioned xp. tried to boot from cd, does NOT appear to even recognize anything is in the drive. went into bios made sure cd was 1st boot, still "missin os" still doesn't see cd in drive. here is where i would like some more detail pleez, mind you i'm a beginner, yet have a keen interest in computers. now i read that computers don't like swaps of os too hot, so i pulled the xp hdd back out of the 2k machine set it up as slave in the machine i'm using now (it's actual "birth" machine) & formatted it, then deleted it from the drivers before removing it. put it back in the rig that runs 2k, now the error states "NTLDR is missing". by the way i corrected the jumpers both swaps. tried the cd again still ntlrd error. went into bios, confirmed recognition of hdd, yep pretty as a picture. does'nt formatting wipe the thing clean (for my intent & purpose)? i have to be missing a step here, i mean why won't the thing read the cd? the cd rom works, i read something about possibly not being able to boot from it though!?
View 5 Replies
View Related
Apr 2, 2006
Everything was fine last night when i was on my computer but when i woke up this morning and booted her up i recieved the "NTLDR is missing" error message with instructions to use control+alt+delete to restart and try again. I have not recently installed any new hardware or changed configurations and the only new software is Diablo2 and its expansion which has been on my computer for a week now (its run fine in the past and never caused any problems). I've been reading through the forums for most of the day and tried several different suggestions to fix my problem but to no avail. I've tried using a boot disk i made off of a friend's computer, rebuilding the boot record using the recovery console, and i even tried that NTLDR "fixer" disk that i downloaded from a link i frequently see posted. Nothing has worked. The only interesting thing is that when i use that fixer program (the one that gives you 10 boot options and you have to go through every one to find one that works) is that instead of getting a missing NTLDR message, i get a hal.dll error instead! So i go back into my XP cd and expand the hal.dll into the system32 folder on my drive and try again but now i'm back to the NTLDR error!
I really dont know what to do here and any help is appreciated! Also, i'm not tp sure how vital this is but my drive is labeled D: although it is the only HDD in my computer, when i try to use the recovery console i only have one option for an OS to explore and it is labeled C:. I'm not sure if how this happened is important to my current situation but i can explain it if necessary. Again, any suggestions here would be a big help and hope to hear from you soon. Oh, formating is also out of the quesion as i have no backups of my current papers, projects, and other data.
View 14 Replies
View Related
Jul 11, 2008
I was on my computer yesterday when there was a power surge. My operating system is windows XP. Since this happened my computer won't restart properly, I get this message:
NTLDR is missing press ctrl + alt + del to restart I have done some research to figure out.
View 1 Replies
View Related
