System32 Missing Or Corrupt - WINDOWSSYSTEM32CONFIGSYSTEM
Aug 3, 2005
I've just turned my notebook on this morning and a screen came up "Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM" It then tells me that I can fix the problem using the original Setup CD-ROM... The problem is, in the last couple of years that I've had it we've moved twice and are about to move again and I can't find it anywhere! And, I need the computer for work. Is there any way I can do this without the CD?
I had problems right out of the gate...after typing out the first command line: tmpsystem.bak and hitting enter, I got the message that said could not find file...so I tried again and was extra diligent with my typing, but the same disappointing message came up.I decided to use some imagination and initiative and, started with the last command line first: tmpdefault.bak This worked for this line and then the next one too: tmpsecurity.bak and so on. When I got back to the tmpsystem.bak line, it even worked for that one too.
Then I moved on to the delete commands and that worked out OK...as far as I could tell?But, when I got to the repair lines and, in particular, the: repairsystem C:windowssystem32configsystem I then got the same message saying that the file could not be found...back to square one.Then I went back to the start...typing out the copy lines, and I got the same message for the system line again. So, I started from the default line again and it worked--I was asked if I wanted to re-write the first file copied and I chose Y (yes) then the same brick wall when I got to the system line.
I have xp and when i start my cmputer i get this Windows could not start because the following file is missing or corrupt windowssystem32configsystem,I don't seam to be able to enter safe mode with f8 pressed.
I am having an issue with my computer obviously. I have a VPR Matrix desktop FT6100 computer. It has windows xp as its operating system. We had a huge storm here last Friday causing a total loss of power. Now, when I turn on the computer I am getting the following error message: Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM then it says please put in restore cd and press "r" for the repair menu. I put in my restore cd and the options were to just do the windows xp files, No Format or Quick Format. The first option the computer said was least destructive so I tried that route and brings me back to the same black screen w/ the same error msg. I went to microsoft.com to print off the instructions for the error msg and I can't even get to where the instructions are talking about. I don't want to lose all my files so I haven't touched the other 2 options on the restore cd. How can I fix this with my system?
Windows couldnt start because following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM. You can attempt to repair file by starting Windows Setup using the original Setup CD-ROM. Select?r? at the first screen to start repair. what do do? takes me to repair consol and then? i tried to fixboot.
My friend's comp isnt working it gets the following error during boot up
"Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM"
I tried the windows support method to recovering from a corrupt registry..after I created a temp folder I entered the first copy line copy c:windowssystem32configsystems c:windows mpsystem.bak...it says that this file does not exist....any help would be greatly appreciated
I have an old computer with an Intel Celeron 467 MHz processor, 128 ram and I'm running Windows XP SP2. Earlier this week I came to turn on my computer, and could not log on to Windows. "Windows could not start because the follwing file is missing or corrupt Windowssystem32configsystem." I reinstalled XP. I couln't access the repair install. Then I thought maybe someone had gotten into my computer and I downloaded Zone Alarm...Big mistake. Since then my computer freezes, programs jam, I keep losing my internet connection,(DSL) and I get "cannot find server" messages. Its also slower as molasses in winter. A little better since the removal. Obviously Zone Alarm was removed and i went back to Windows firewall. I also use Ad-Aware, AVG, Spybot Search and Destroy, Spyware Blaster and I use Registry Mechanic and TuneUp Utilities.
My Hewlett Packard Pavilion ZT3000 notebook was running fine but then Windows wouldn't load and the message, "system32driverstfs.sys is missing or corrupt" came up. I'm using Windows XP.Only two things happened prior to this occurring, the lid got shut a little hard but no damage and I downloaded Servicepack 2.
I ran a HHD self test and it tested ok, all the help screens, etc. come up fine but not Windows.I have an operating disk and a recovery disk but neither seems to help
Last night while watching the news, my computer rebooted all on it's own way over on the other side of the room and now I have the following error message. Windows could not start because the folowing file is missing or corrupt System32/drivers/ntfs.sys. I will boot up if I try several times but even after doing a system restore I get the same message plus sometimes I get Windows could not start because the folowing file is missing or corrupt System32/drivers/pci.sys
I have been getting Norton (Corporate, installed by someone else) notificatons for a few weeks about a Trojan (cache.cachekit) and Norton could not get rid of it. Now I cant boot up and it tells me my file(System32/system/config) is missing or corrupt. I was thinking it was my Trojan I couldnt get rid of, what do you think? Also, my OS was installed by someone else so I didnt have my own disk, however I have ordered one and it should come in a week. If it is my elusive Trojan, for one, how do I get rid of it for good, and also, when I get my disk I dont know exactly what to do to fix the computer. I cant bring it up in safemode either. I have never installed a OS, but I have installed other software-on a properly functoning computer that is. Do I absolutely have to wipe my hardrive clean, and if so, how do I do it?
XP pro computer tells me this when i turn it on. Offers to load in safe mode first, then tells me its lost/broken this file, push r to repair. Push r and it restarts. Cant work out how to fix this problem, and not liking the name ntfs in the error at all.
My computer crashed and when i started it back up i got a black screen saying 'system32 is corrupt or missing' or something similar to that, so we reformatted it, now there are problems.It refuses to update. It was reformatted early yesterday, but it hasn't run a single update.i can't go to the Microsoft website and manually download the important updates, because after i hit download i get a 'page cannot be displayed' notice.Internet explorer won't open. not a big deal for me because i use Firefox, but my dad uses IE. when i try to open it i get a 'IE has encountered a problem and needs to close' notice. No page pops up or anything. I've been trying to convince my dad to get a new computer for years, and he always said 'not until this one's completely dead'
I was playing Medieval II: Total War and the computer crashes. Then when I try to boot it up I get Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM. I've checked BIOS for the boot procedure, and everything seems to be in order. I then go through the regular procedure of putting in the CD to run the repair. I boot from the CD, it loads up fine... but there are no partitions and no option to enter the recovery console (which I've read so many wonderful things about).
So now I'm sort of stuck. There's no options other than install and delete the selected (none) partition. If I hit delete (b/c in anger sometimes I'm an idiot) it tells me it's a system partition and there could be VALUABLE system information like AN OS (I'm fuming at this point). NO... I did not delete it. If I hit install, I get a bunch of bogus about how "Setup cannot install to the selected partition.
So I was working with adobe photoshop and it absolutely refused to exit. I tried ctrl+alt+delete and after about twenty minutes it was still frozen on my screen. So I tried shutting the computer down normally, and it froze on the "Windows is shutting down" screen for like, the fiftieth time. So I had to force it off by holding down the power button. When I turned it back on to continue working, I got a message saying windows/system32/config (or something like that) was missing or corrupt. I pressed "r" since I don't know where my startup disk is and it restarted.
I have Norton GoBack, so I hit the space-bar to allow it to restore to about an hour earlier before I opened photoshop. This wasn't the first time this had happened. I've been getting the same message at every other start up for a couple weeks and this method worked fine every time. It seemed to be okay this time too but then it just RESTARTED for no apparent reason. When it got to the Norton GoBack screen I got a message saying the system had become unstable and needed to start over, and it suggested it was possibly because of a bug in an application or a hardware problem which is also possible.
My problem started when I booted my computer. Windows (XP Home Edition) started with the message that windows/system32/config/system.sav was missing or corrupt. It told me to use the recovery console to solve the problem. I saw with the recovery console that the system.sav file wasn't missing so it had to be corrupt (0 bytes in filesize).
Windows could not start because the following file is missing or corrupt: /windows/system32/config/system It states that I can put in the originial setup CD-ROM and select 'r' to start repair but that doesn't help me. My laptop did not come with a windows cd as I bought it preloaded from BestBuy. So about 4 years ago when my computer was overcome with the Sasser worm, I reformatted and loaded a friend of mine's Win XP Pro cd on my laptop. I still have the CD but when I hit 'r' (Boot partition recovery) it does its little DOS thing and then gives me a Disk I/O Error. I am thinking that maybe it is trying to boot from a floppy drive and not my CD drive and thats why I am getting the I/O error?
I am getting the following error and it loops: "file is missing or corrupt windows root system32 hal.dll" When I try and run the windows cd and either wipe or repair the error it tells me that the "the setup did not find hard drive disks" Now I am thinking the hard drive is defective?? Or do I have a virus?
I come to boot up the computerwhen booting in normal mode or safe mode I get the message system32/drivers/ntfs.sys is missing or corrupt please insert original windows disk and press 'r' on the first screen. so i put in the disk and it says boot CD but then after a while it just comes up with the same message telling me to insert original disk.I have tried this now with 2 different windows disks, iv changed to boot settings and this still does not work.
Windows xp crashed, wont even open. I get an error: <windows root> / system32/hal.dll is missing or corrupt. I dont have a xp disk, it did not come with the pc when i bought it. Came with xp already on it.
When I start up my laptop, the screen immediatly says Windows could not start because the following file is missing or corrupt: windowssystem32configsystem You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select 'r' at the first screen to start repair.The deal is I dont have the cd. IF someone could tell me how to get an xp cd (without buying) that'd be great.
I have had my Dell computer for about a month. When I boot up I get a message saying that I can't boot up because <windows root> System32NTOSKRNL.EXE is missing or corrupt. I get the same thing for system32DRIVERS NTFS.SYS.
i turned on my pc i got the error XP Could not start, the following file is missing or corrupt: I run Microsoft Windows home service pack 2Also, to complicate things, My computer is lacking a disk drive, so i only have access to USB ports.
windows wont start up for me and i get the error message Windows could not start because the file is missing or corrupt: windowssystem32configsystem Also i dont have the repair install option under install windows), it just says installing two versions of windows is not recommended do you wish to continue. I went into the recovery console but really have no idea what to do there.
My Windows XP operating system crashed last night. When I try to turn on the computer I get a black screen that appears stating that Windows did not shut down properly and how would I like to restart the computer. There are then five options available to chose from (3 Safe Modes options, last known configuration, and normally). I have attempted all five with no good outcome.
I do get the following message: "Windows could not start because the following file is missing or corrupt: windowssystem32configsystem You can attempt to repair this file by starting Windows Set using the original Setup CD-ROM. Select 'r' at the first screen to start repair"....
I can't start Windows XP Home Edition on my PC because the hal.dll file in system32 is corrupt. Therefore I am getting the "Windows could not start because the following file is missing or corrupt: <windows root>system32hal.dll. Please re-install a copy of the above file." error message. To complicate things, I absolutely don't have the original Windows XP Home Edition CD I used to install the operating system; therefore I can't just restore missing file.
It appears that I have a corrupt - dll - file in my system32 folder. Can someone please walk me through copying a backup dll file or a new dll zip file to the system32 folder?
My pc won't boot into windows...i get this error. I don't have a copy of XP to try and repair because i bought my PC from futureshop with XP pre-loaded..... anyway of fixing this without having a copy of xp?
corrupt: windowssystem32configsystem ususally when i get this error i format the machine because i hate having to deal with the problem; im the tech guy at a school and i replaced the teachers machine with a new one, i was about to format this when she came in here last minute frantic because she has important accounting information on her local C: drive. she knows she is suppsed to save ALL IMPORTANT nfo on her networkd drive but shes a mornon and doesnt follow instructions. i don't have my copyh of knoppix so can somebodyh tell me a quick fix for this?
