PC Wont Boot: System32/drivers/ntfs.sys Missing Or Corrupt?
May 16, 2010
I come to boot up the computerwhen booting in normal mode or safe mode I get the message system32/drivers/ntfs.sys is missing or corrupt please insert original windows disk and press 'r' on the first screen. so i put in the disk and it says boot CD but then after a while it just comes up with the same message telling me to insert original disk.I have tried this now with 2 different windows disks, iv changed to boot settings and this still does not work.
XP pro computer tells me this when i turn it on. Offers to load in safe mode first, then tells me its lost/broken this file, push r to repair. Push r and it restarts. Cant work out how to fix this problem, and not liking the name ntfs in the error at all.
My Hewlett Packard Pavilion ZT3000 notebook was running fine but then Windows wouldn't load and the message, "system32driverstfs.sys is missing or corrupt" came up. I'm using Windows XP.Only two things happened prior to this occurring, the lid got shut a little hard but no damage and I downloaded Servicepack 2.
I ran a HHD self test and it tested ok, all the help screens, etc. come up fine but not Windows.I have an operating disk and a recovery disk but neither seems to help
I have had my Dell computer for about a month. When I boot up I get a message saying that I can't boot up because <windows root> System32NTOSKRNL.EXE is missing or corrupt. I get the same thing for system32DRIVERS NTFS.SYS.
Here goes, the other day I booted up my PC and it showed "windows can not boot, ntfs.sys is missing or corrupt" so I did this. Microsoft support. I replaced the file in the recovery console and everything copied over fine. Then I booted up again and I received an error message before windows displayed my login screen --lsass.exe "endpoint is invalid" click ok and my computer reboots. Windows at that time was booting all the way up though. I found this support article but did not help Microsoft support This error does not allow me to boot into safe mode or regular windows but I can get into the recovery console.
Last night while watching the news, my computer rebooted all on it's own way over on the other side of the room and now I have the following error message. Windows could not start because the folowing file is missing or corrupt System32/drivers/ntfs.sys. I will boot up if I try several times but even after doing a system restore I get the same message plus sometimes I get Windows could not start because the folowing file is missing or corrupt System32/drivers/pci.sys
I have been getting Norton (Corporate, installed by someone else) notificatons for a few weeks about a Trojan (cache.cachekit) and Norton could not get rid of it. Now I cant boot up and it tells me my file(System32/system/config) is missing or corrupt. I was thinking it was my Trojan I couldnt get rid of, what do you think? Also, my OS was installed by someone else so I didnt have my own disk, however I have ordered one and it should come in a week. If it is my elusive Trojan, for one, how do I get rid of it for good, and also, when I get my disk I dont know exactly what to do to fix the computer. I cant bring it up in safemode either. I have never installed a OS, but I have installed other software-on a properly functoning computer that is. Do I absolutely have to wipe my hardrive clean, and if so, how do I do it?
I've just turned my notebook on this morning and a screen came up "Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM" It then tells me that I can fix the problem using the original Setup CD-ROM... The problem is, in the last couple of years that I've had it we've moved twice and are about to move again and I can't find it anywhere! And, I need the computer for work. Is there any way I can do this without the CD?
My computer crashed and when i started it back up i got a black screen saying 'system32 is corrupt or missing' or something similar to that, so we reformatted it, now there are problems.It refuses to update. It was reformatted early yesterday, but it hasn't run a single update.i can't go to the Microsoft website and manually download the important updates, because after i hit download i get a 'page cannot be displayed' notice.Internet explorer won't open. not a big deal for me because i use Firefox, but my dad uses IE. when i try to open it i get a 'IE has encountered a problem and needs to close' notice. No page pops up or anything. I've been trying to convince my dad to get a new computer for years, and he always said 'not until this one's completely dead'
I was playing Medieval II: Total War and the computer crashes. Then when I try to boot it up I get Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM. I've checked BIOS for the boot procedure, and everything seems to be in order. I then go through the regular procedure of putting in the CD to run the repair. I boot from the CD, it loads up fine... but there are no partitions and no option to enter the recovery console (which I've read so many wonderful things about).
So now I'm sort of stuck. There's no options other than install and delete the selected (none) partition. If I hit delete (b/c in anger sometimes I'm an idiot) it tells me it's a system partition and there could be VALUABLE system information like AN OS (I'm fuming at this point). NO... I did not delete it. If I hit install, I get a bunch of bogus about how "Setup cannot install to the selected partition.
So I was working with adobe photoshop and it absolutely refused to exit. I tried ctrl+alt+delete and after about twenty minutes it was still frozen on my screen. So I tried shutting the computer down normally, and it froze on the "Windows is shutting down" screen for like, the fiftieth time. So I had to force it off by holding down the power button. When I turned it back on to continue working, I got a message saying windows/system32/config (or something like that) was missing or corrupt. I pressed "r" since I don't know where my startup disk is and it restarted.
I have Norton GoBack, so I hit the space-bar to allow it to restore to about an hour earlier before I opened photoshop. This wasn't the first time this had happened. I've been getting the same message at every other start up for a couple weeks and this method worked fine every time. It seemed to be okay this time too but then it just RESTARTED for no apparent reason. When it got to the Norton GoBack screen I got a message saying the system had become unstable and needed to start over, and it suggested it was possibly because of a bug in an application or a hardware problem which is also possible.
My problem started when I booted my computer. Windows (XP Home Edition) started with the message that windows/system32/config/system.sav was missing or corrupt. It told me to use the recovery console to solve the problem. I saw with the recovery console that the system.sav file wasn't missing so it had to be corrupt (0 bytes in filesize).
Windows could not start because the following file is missing or corrupt: /windows/system32/config/system It states that I can put in the originial setup CD-ROM and select 'r' to start repair but that doesn't help me. My laptop did not come with a windows cd as I bought it preloaded from BestBuy. So about 4 years ago when my computer was overcome with the Sasser worm, I reformatted and loaded a friend of mine's Win XP Pro cd on my laptop. I still have the CD but when I hit 'r' (Boot partition recovery) it does its little DOS thing and then gives me a Disk I/O Error. I am thinking that maybe it is trying to boot from a floppy drive and not my CD drive and thats why I am getting the I/O error?
I am getting the following error and it loops: "file is missing or corrupt windows root system32 hal.dll" When I try and run the windows cd and either wipe or repair the error it tells me that the "the setup did not find hard drive disks" Now I am thinking the hard drive is defective?? Or do I have a virus?
Windows xp crashed, wont even open. I get an error: <windows root> / system32/hal.dll is missing or corrupt. I dont have a xp disk, it did not come with the pc when i bought it. Came with xp already on it.
When I start up my laptop, the screen immediatly says Windows could not start because the following file is missing or corrupt: windowssystem32configsystem You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select 'r' at the first screen to start repair.The deal is I dont have the cd. IF someone could tell me how to get an xp cd (without buying) that'd be great.
I plugged in and switched it on it has been crashing intermittently. This occurs at random intervals and does not seem to be related to whichever program I am using. The monitor goes black and the pc reboots but does not get as far as windows,displaying the message:windows could not start because the following file is missing or corrupt: System32/Drivers/Ntfs.sys"unable to do this because after pressing "r" at the first "welcome to set-up" screen I get the message:
"Setup did not find any hard disk drive(s) installed on your computer. Make sure any hard disk drives are powered up and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or Setup program. Setup cannot continue. To exit Setup press F3"
When left for a while (about half an hour), I come back to it and see that the screen is black with something about a system disk error. I experienced this before I had to re-install windows a few weeks back.The first time, I pressed enter, and the system started up fine. The second time, the secondary loading screen (that's what I call it...it's like little white rectangles at the bottom of a black screen...you know the ne, right?). Well yeah that goes really really slow. When it get's a few inches in, it stops and tells me 'system32driverstfs.sys is missing or corrupt'.
my file windows/system32/config/system is corrupt. it says i can boot with the CD and use the "R"epair function. I do that and it takes me to DOS where I can roam around my harddrive and the windows CD. now how do I find this file to replace it? because on the windwos CD there is no "system" file in the directory I386/system32/config/. I've tried to copy it from my other computer, but since it's using the file I cant'!
Early last week I ran a Windows update on my Compaq SR1625NX and upon restart it would not boot Windows. I tried "last good configuration", "debug mode" and "safe mode" to no avail. It always restarts while booting Windows. I tried both the built-in "recovery console" and the recovery discs I bought from HP/Compaq upon the advise of an online support person. When loading the recovery console either way the blue screen pops up and tells me there is a problem with the "ntfs.sys" file.
I had a bug that deleted the mouse and keyboard drivers when it executed. I restarted the computer but cannot use the mouse of keyboard at all. therefore cannot use the computer. i have tried using the 6 disk setup for xp sp1 but when i select 1 for the drive it stops. i also cannot boot from the xp cd. i can however access the cd-rom using a boot floppy. but i do not know the actual names of the drives i am trying to reinstall.
We made the mistake of ordering Dell pcs for work (Never Again & we advise against it!) because they do not include Windows OS disks with the units. They include it on a partition of the HD: (-nice of them). Now one system will not boot up and it is completely out of the question to restore the system to it's original factory setting because of the monetary value of the files that will be lost.
Technically, all it's missing is the WINDOWS/SYSTEM32/... file(s) and on any "normal" pc, popping in the WinXP disc on boot and hitting "r" usually solves that problem. However, F5 and booting the system at its last working condition does not work. Thanks to Microsoft's security features, we cannot use another XP disc to fix this problem. And I will never contact Dell's support line since they've tried to charge us for technical support before they'd give us any help. And this was on a brand new pc that we just purchased. (For some reason did not boot up and they wanted to charge us in order to get it started! - Main reason I will NEVER purchase a computer from Dell ever again.... no CD's is the 2nd reason.) Anyway, the only option we have is to take it in for servicing or place the HD in a second pc.
I had a missing "Windowssystem32configsystem" upon restarting my comp last Saturday. Couldn't boot into safe mode at all. Used HP's recovery console to run chkdsk and it fix errors on the volume. Wouldn't let me run the recovery disks I had to get from HP since they are not given with a new computer. Great I thought.Upon starting now, my antivirus won't run and a lot of Windows programs(Search adn System Restore just a blank page, Media Player, etc) .I can get IE to open up but no active X although it says it is enabled, also my home page doesn't show up at all but it is set to it. Those are some of the things I have found wrong so far as I am sure I have more.
Dell Inspiron 9100, 1 GB mem, 60 GB HD, Win XP Home 2002 SP3. Kept clean with TE Pro, cseraser, syswiper, Adaware, Spybot S&D, AWC V2, Regcure, RegscrubXP. McAfee current. Win XP SP's and updates current.
Boot failed after POST with (as near as I can remember, sorry!) "missing or corrupt HAL.DLL"
This has happened twice. The first time it happened (a year or so ago), I reinstalled XP. I also installed a second installation of Win XP in a WINDOWS2 dir. Set up boot.ini to allow me to select WINDOWS or WINDOWS2 to boot from. Figured this would help if it happened again.
i have dual boot on two HD, both XP Pro SP2 suddenly one of them (drive C can not boot. "Missing or corrupt HAL.DLL" i have google & see Microsoft Knowledge and try some advice but still no work.
As the title says my pci.sys in the system32drivers folder is missing or is corrupt, so I can't boot windows. The only possible solution is to start the recovery console and type:set AllowAllPaths = true expand d:i386pci.sy_ c:windowssystemdrivers32 If you don't type set AllowAllPaths = true you can't access the windows folder, thus I cannot fic the pci.sys. Well the problem is I don't have the Set command enabled, and It can only be enabled with MMC, but how the hell am I supposed to enable the Set command when I cant access MMC? Dilemma >.< don't wanna reinstall Windows XP again... So is there a way to get Set AllowAllPaths = true to work without MMC?
I'm getting the System32driverspci.sys missing or corrupt message when trying to boot XP.Now, I've tried going to my recovery console and tryed "expand drive:i386pci.sy_ C:winntsystem32drivers /y" all I get is access denied. So then I re-booted from my XP disk and pressed enter to install windows xp. Now supposedly I sould get a repair "r" option, but I don't. It tells me I need to format to install. I guess when you recived that "r" option it will bring you the option of typing the admin passsword so I won't get the access denied message when I'm expanding.The bottom line is that there is one REALLY important folder I need of my C: drive and really don't care about anything else.
XP PRO SP2- Recieve the following message upon unsuccessful boot attempt. "WINDOWS COULD NOT START BECAUSE THE FOLLOWING FILE IS MISSING OR CORRUPT: <WINDOWS ROOT> SYSTEM32HAL.DLL (not yelling ) I have tried to boot from my xp pro cd to utilize the recover utility however the computer will not boot from the cd. I able to use a dos boot disk however my keyboard is USB and I cannot find USB drivers to work under dos, so I was unable to do anything at that point. It was my hope that I could work through dos to edit the boot.ini file.
I do not want to reinstall windows. If I have to I will place the hard drive in another computer as a slave and work on it that way but I'd rather not. The only other tower type computer I have other then laptops is running xp home SP2.
