Updated System Wont Boot: Ntfs.sys Corrupt?
May 12, 2007
Early last week I ran a Windows update on my Compaq SR1625NX and upon restart it would not boot Windows. I tried "last good configuration", "debug mode" and "safe mode" to no avail. It always restarts while booting Windows. I tried both the built-in "recovery console" and the recovery discs I bought from HP/Compaq upon the advise of an online support person. When loading the recovery console either way the blue screen pops up and tells me there is a problem with the "ntfs.sys" file.
View 10 Replies
ADVERTISEMENT
May 10, 2008
Here goes, the other day I booted up my PC and it showed "windows can not boot, ntfs.sys is missing or corrupt" so I did this. Microsoft support. I replaced the file in the recovery console and everything copied over fine. Then I booted up again and I received an error message before windows displayed my login screen --lsass.exe "endpoint is invalid" click ok and my computer reboots. Windows at that time was booting all the way up though. I found this support article but did not help Microsoft support This error does not allow me to boot into safe mode or regular windows but I can get into the recovery console.
View 5 Replies
View Related
May 16, 2010
I come to boot up the computerwhen booting in normal mode or safe mode I get the message system32/drivers/ntfs.sys is missing or corrupt please insert original windows disk and press 'r' on the first screen. so i put in the disk and it says boot CD but then after a while it just comes up with the same message telling me to insert original disk.I have tried this now with 2 different windows disks, iv changed to boot settings and this still does not work.
View 1 Replies
View Related
Mar 28, 2007
Does anyone know how to fix a Ntfs.sys file without resorting to using the OS installation CDs? I got the message the about Windows not being able to start because of a missing or corrupt Ntfs.sys. Because I don't have the installation CDs I just copied a Ntfs.sys file off the other PC in our house put it on my flash disk and restarted the PC with this message. It booted up fine into windows but my system is unstable, it restarts at random. Sometimes it works ok and then sometimes it reboots repeatedly, and I got the message again a few times but I just press the reset button and it boots up fine again. So I am able to work in windows, can I fix the file in windows without doing that whole thing with the installation CDs and RC session?
View 2 Replies
View Related
Sep 20, 2005
When left for a while (about half an hour), I come back to it and see that the screen is black with something about a system disk error. I experienced this before I had to re-install windows a few weeks back.The first time, I pressed enter, and the system started up fine. The second time, the secondary loading screen (that's what I call it...it's like little white rectangles at the bottom of a black screen...you know the ne, right?). Well yeah that goes really really slow. When it get's a few inches in, it stops and tells me 'system32driverstfs.sys is missing or corrupt'.
View 1 Replies
View Related
Jan 24, 2008
Computer is getting on a bit, athlon 3500+ (about to put an opty 180 in to speed things up) So, i run device detective, that shows a whole stack of old drivers So, then i buy it, and update the drivers. Then, windows wont boot, so i have to go back to a previous one that did boot. Problem is, my boys favourite game, "Star wars knights of the old republic" wont boot. Well, it starts, but then says it has to close. I didnt do a system restore point, and dont know how to roll back the driver to its previous one. Even if i knew how, i did about a dozen drivers at once.
View 3 Replies
View Related
Jun 7, 2005
Im doing a clean, brand spanking new install on a machine that has no floppy drive. I have switched around the boot sequence in the BIOS to boot the CD ROM first, and that recognizes the disc ok. Windows formats the unpartitioned hard drive to NTFS. At first I got an error saying the NTFS.SYS file was corrupt, so I wiped everything out, and began again. This time I partitioned the hard drive first, and it seems to want to go futher, and I no longer get the NTFS.SYS error, but when it begins copying files, it hangs at about 18 percent when it starts copying 'driver.cab' and I get a Blue Screen saying PFN_LIST_CORRUPT.
View 9 Replies
View Related
Sep 28, 2009
I was recently in the middle of doing a chkdsk /f when it froze at 2% for almost an hour.... So I did a hard reset and now I get a BSoD with "Stop error: 0x00000024" which I'm assuming has something to do with the ntfs.sys file? I do not have my original XP installation disc and I cannot boot into safe mode (BSoD also.) The only thing I have is an Ubuntu live CD.. Anything I can do to fix it?
View 3 Replies
View Related
Jan 22, 2007
I get an error message that the WINDOWSSYSTEM32CONFIGSYSTEM file is "missing or corrupt". How do I repair this. I can only boot off the CD and either do a repair/reinstall or DOS repair.
View 6 Replies
View Related
May 25, 2006
XP pro computer tells me this when i turn it on. Offers to load in safe mode first, then tells me its lost/broken this file, push r to repair. Push r and it restarts. Cant work out how to fix this problem, and not liking the name ntfs in the error at all.
View 6 Replies
View Related
Sep 28, 2009
I was recently in the middle of doing a chkdsk /f when it froze at 2% for almost an hour.So I did a hard reset and now I get a BSoD with "Stop error: 0x00000024" which I'm assuming has something to do with the ntfs.sys file? I do not have my original XP installation disc and I cannot boot into safe mode (BSoD also.) The only thing I have is an Ubuntu live CD
View 1 Replies
View Related
Feb 22, 2007
As the title says my pci.sys in the system32drivers folder is missing or is corrupt, so I can't boot windows. The only possible solution is to start the recovery console and type:set AllowAllPaths = true expand d:i386pci.sy_ c:windowssystemdrivers32 If you don't type set AllowAllPaths = true you can't access the windows folder, thus I cannot fic the pci.sys. Well the problem is I don't have the Set command enabled, and It can only be enabled with MMC, but how the hell am I supposed to enable the Set command when I cant access MMC? Dilemma >.< don't wanna reinstall Windows XP again... So is there a way to get Set AllowAllPaths = true to work without MMC?
View 2 Replies
View Related
Feb 21, 2007
I'm getting the System32driverspci.sys missing or corrupt message when trying to boot XP.Now, I've tried going to my recovery console and tryed "expand drive:i386pci.sy_ C:winntsystem32drivers /y" all I get is access denied. So then I re-booted from my XP disk and pressed enter to install windows xp. Now supposedly I sould get a repair "r" option, but I don't. It tells me I need to format to install. I guess when you recived that "r" option it will bring you the option of typing the admin passsword so I won't get the access denied message when I'm expanding.The bottom line is that there is one REALLY important folder I need of my C: drive and really don't care about anything else.
View 6 Replies
View Related
Jan 2, 2005
When Windows XP boots up, an error message states that a system file is corrupt or missing. Which command scans Windows system files for missing or corrupt operating systems files and replaces them with the correct Microsoft versions?
View 1 Replies
View Related
Jul 25, 2004
I plugged in and switched it on it has been crashing intermittently. This occurs at random intervals and does not seem to be related to whichever program I am using. The monitor goes black and the pc reboots but does not get as far as windows,displaying the message:windows could not start because the following file is missing or corrupt: System32/Drivers/Ntfs.sys"unable to do this because after pressing "r" at the first "welcome to set-up" screen I get the message:
"Setup did not find any hard disk drive(s) installed on your computer. Make sure any hard disk drives are powered up and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or Setup program.
Setup cannot continue. To exit Setup press F3"
View 14 Replies
View Related
Jul 18, 2005
I have had my Dell computer for about a month. When I boot up I get a message saying that I can't boot up because <windows root> System32NTOSKRNL.EXE is missing or corrupt. I get the same thing for system32DRIVERS NTFS.SYS.
View 2 Replies
View Related
Jul 15, 2005
my file windows/system32/config/system is corrupt. it says i can boot with the CD and use the "R"epair function. I do that and it takes me to DOS where I can roam around my harddrive and the windows CD. now how do I find this file to replace it? because on the windwos CD there is no "system" file in the directory I386/system32/config/. I've tried to copy it from my other computer, but since it's using the file I cant'!
View 2 Replies
View Related
Jan 26, 2006
I started having problems with Internet Explorer, it would crash very frequently and I would have to clear temp files and cookies for it to work properly. I posted a HJT log and was advised to update to SP2 (whoops, only had broadband 3 weeks so I didn't know
I also started using Firefox and it worked fine where IE crashed out. I think i'll stick with it.
Now I have problems with my connection, IE and Firefox often time out and take 20seconds or so to load a new page. My dads laptop on the same wireless connection works fine (I have PC with wireless card on BT 2meg co
View 1 Replies
View Related
Apr 7, 2006
I am currently using: Trend Micro PC-cillin, Webroot Spy Sweeper, Microsoft AntiSpyware, ewido anti-malware and I have Spybot Search & Destroy installed. All of this software (along with Windows) is kept updated and none of the software mentioned has found anything (except for the occasional tracking cookie) wrong with my computer.
View 3 Replies
View Related
Mar 28, 2005
I have updated my system from win98 to winxppro. It was my understanding that it would not lose my contacts or favorites, but would simply update the program. I lost everything. Unfortunately, I didn't follow procedure and export the info to a disk. Is there any way to get my contacts back?
View 4 Replies
View Related
Mar 7, 2005
I've got a corrupted load of XP that will not boot up. Is there a way to boot into a DOS shell with NTFS support so I can see my files and then copy them to a second hard-drive. I used to do this often with 95/98, just add in a second(slave) hard drive and then boot with a DOS disk and copy the files to the second drive then I could format and reload the original HD. I haven't been able to do this with NTFS volumes, if you boot from a DOS disk you don't see anything
View 12 Replies
View Related
Mar 18, 2005
After converting HD from FAT32 to NTFS using the command prompt in Windows XP. The PC won't boot up-just makes noise with a black screen. Symantics recovery disk doesn't work either (Norton SystemWorks 2005 premier installed.I didn't back-up B-4 conversion. I do have OEM recovery disks that came with my Fry's laptop-can I use these?
View 14 Replies
View Related
Sep 12, 2007
I am trying to create a Boot Disk for an NTFS or FAT Partition in Windows XP.So far i have formatted my floppy disk, but im stuck on the next step!Copy the Ntldr and the Ntdetect.com files from the I386 folder on the Windows XP Setup CD-ROM, Windows XP Setup floppy disk, or from a computer that is running the same version of Windows XP as the computer that you want to access with the boot floppy.I have found the Ntldr file and the Ntdetect.com file, but when i have copied them where do i paste them?? What do i do with them?
View 14 Replies
View Related
Apr 6, 2005
While in XP I ran PQBoot from the Partition Magic 7 Start Menu, it loaded a command window and asked which O/S I wanted to load - foolishly I entered 2 for Red Hat 9 and pressed enter. (Dumb I know, and changing my mind 1 microsecond later was still too late.)When it rebooted it said "Autocheck not available" and rebooted.
I booted the XP CD and chose the second recovery option but the list of partitions had at the top a partition that was not C:Windows, I can't remember exactly what it said but used drive I: and some other description. So I exited without doing anything to do more research.I booted Knoppix 3.7 live Linux CD and that reassuringly showed all the drive partitions still where they should be especially hda1 my Windows partition.
View 6 Replies
View Related
May 24, 2006
A friend wanted to remove the FAT32 Win98 partition and leave his XP NTFS partition as the boot partition. He has used PM7 to delete the FAT32 partitin and move the NTFS t the front of the disk. However, it now does not boot. FIXMBR and FIXBOOT (from the Recovery console) looked as if they were fixing things but it still does not boot ("Invalid System Disk...").
View 3 Replies
View Related
Jun 4, 2006
Windows Xp does not recognize the NTFS partition. Any ideas on how to get at the files?
View 4 Replies
View Related
Nov 26, 2006
I have 2 internal HDDs, and 3 external HDDs. However, the recent addition of a Mac by my sister has forced me to be able to share the external HDDs between computers. I understand that the Mac OSX reads/not writes NTFS but will read/write FAT32. Having been advised by other senior Windows users many years back, all my HDDs are in NTFS. I have found no solution to convert NTFS back to FAT32. Does anyone know if you can do so; without damage/corruption? There is much family pictures, common music in these external HDDs; so needless to say, they are precious
View 7 Replies
View Related
Jun 10, 2008
My computer, a dell dimension 8400 with windows xp home edition, keeps coming up with an error saying:Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32Configsystem.i ran boot utility and scanned the computer and the drives come up fine with the test(except the hard disk which popped up errors on a constant.)
View 14 Replies
View Related
Jun 8, 2006
i have windows xp pro installed on my pc along with linux mandrake 10.1 and one day while my dad was surfing the net the sreen turned blue and some type of error message came up and it said to do something if it happend again but i ignored it becuase i thought it wouldnt happen again so i restarted and when it came back on it went to a black sceen and i couldnt do anything but if i let it wait there it would come up with an error saying that windowssystem32config system was missing or corrupt
View 5 Replies
View Related
Jun 17, 2005
I restarted Windows (XP PRO), and it hung on the reboot
before getting to the Win logo. I rebooted again and again and it
never progressed to Windows. Nothing had been troubling before this.
I tried booting from the Windows CD, but got the following error:
Inf file txtsetup.sif is corrupt or missing, status 32768. Setup
cannot continue. Press any key to exit.
Any suggestions?
------------------------------------------------------------------------
rainer79's Profile: http://www.highdots.com/forums/member.php?userid=284
View this thread: http://www.highdots.com/forums/sho [...] ?t=1519464
View 4 Replies
View Related
Jan 5, 2008
This morning when I went to log into windows it would not except my full pass word. 1 letter short. I put my windows disk in and waited a few minutes and when it came up hit any key to boot from disk I hit a key and waited a short while and log in screen was up and tried again and pass word went right in.
View 4 Replies
View Related
