System Wont Boot: Pci.sys Missing Or Corrupt?
Feb 21, 2007
I'm getting the System32driverspci.sys missing or corrupt message when trying to boot XP.Now, I've tried going to my recovery console and tryed "expand drive:i386pci.sy_ C:winntsystem32drivers /y" all I get is access denied. So then I re-booted from my XP disk and pressed enter to install windows xp. Now supposedly I sould get a repair "r" option, but I don't. It tells me I need to format to install. I guess when you recived that "r" option it will bring you the option of typing the admin passsword so I won't get the access denied message when I'm expanding.The bottom line is that there is one REALLY important folder I need of my C: drive and really don't care about anything else.
View 6 Replies
ADVERTISEMENT
Feb 22, 2007
As the title says my pci.sys in the system32drivers folder is missing or is corrupt, so I can't boot windows. The only possible solution is to start the recovery console and type:set AllowAllPaths = true expand d:i386pci.sy_ c:windowssystemdrivers32 If you don't type set AllowAllPaths = true you can't access the windows folder, thus I cannot fic the pci.sys. Well the problem is I don't have the Set command enabled, and It can only be enabled with MMC, but how the hell am I supposed to enable the Set command when I cant access MMC? Dilemma >.< don't wanna reinstall Windows XP again... So is there a way to get Set AllowAllPaths = true to work without MMC?
View 2 Replies
View Related
Jan 2, 2005
When Windows XP boots up, an error message states that a system file is corrupt or missing. Which command scans Windows system files for missing or corrupt operating systems files and replaces them with the correct Microsoft versions?
View 1 Replies
View Related
Jul 18, 2005
I have had my Dell computer for about a month. When I boot up I get a message saying that I can't boot up because <windows root> System32NTOSKRNL.EXE is missing or corrupt. I get the same thing for system32DRIVERS NTFS.SYS.
View 2 Replies
View Related
May 10, 2008
Here goes, the other day I booted up my PC and it showed "windows can not boot, ntfs.sys is missing or corrupt" so I did this. Microsoft support. I replaced the file in the recovery console and everything copied over fine. Then I booted up again and I received an error message before windows displayed my login screen --lsass.exe "endpoint is invalid" click ok and my computer reboots. Windows at that time was booting all the way up though. I found this support article but did not help Microsoft support This error does not allow me to boot into safe mode or regular windows but I can get into the recovery console.
View 5 Replies
View Related
Sep 15, 2008
Dell Inspiron 9100, 1 GB mem, 60 GB HD, Win XP Home 2002 SP3. Kept clean with TE Pro, cseraser, syswiper, Adaware, Spybot S&D, AWC V2, Regcure, RegscrubXP. McAfee current. Win XP SP's and updates current.
Boot failed after POST with (as near as I can remember, sorry!) "missing or corrupt HAL.DLL"
This has happened twice. The first time it happened (a year or so ago), I reinstalled XP. I also installed
a second installation of Win XP in a WINDOWS2 dir. Set up boot.ini to allow me to select WINDOWS or WINDOWS2 to boot from. Figured this would help if it happened again.
View 2 Replies
View Related
Jan 9, 2008
i have dual boot on two HD, both XP Pro SP2 suddenly one of them (drive C can not boot. "Missing or corrupt HAL.DLL" i have google & see Microsoft Knowledge and try some advice but still no work.
View 3 Replies
View Related
Jun 29, 2008
XP PRO SP2- Recieve the following message upon unsuccessful boot attempt. "WINDOWS COULD NOT START BECAUSE THE FOLLOWING FILE IS MISSING OR CORRUPT: <WINDOWS ROOT> SYSTEM32HAL.DLL (not yelling ) I have tried to boot from my xp pro cd to utilize the recover utility however the computer will not boot from the cd. I able to use a dos boot disk however my keyboard is USB and I cannot find USB drivers to work under dos, so I was unable to do anything at that point. It was my hope that I could work through dos to edit the boot.ini file.
I do not want to reinstall windows. If I have to I will place the hard drive in another computer as a slave and work on it that way but I'd rather not. The only other tower type computer I have other then laptops is running xp home SP2.
View 8 Replies
View Related
Dec 15, 2004
Windows couldnt start because following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM. You can attempt to repair file by starting Windows Setup using the original Setup CD-ROM. Select?r? at the first screen to start repair. what do do? takes me to repair consol and then? i tried to fixboot.
View 2 Replies
View Related
Feb 23, 2005
My friend's comp isnt working it gets the following error during boot up
"Windows could not start because the following file is missing or corrupt:
WINDOWSSYSTEM32CONFIGSYSTEM"
I tried the windows support method to recovering from a corrupt registry..after I created a temp folder I entered the first copy line copy c:windowssystem32configsystems c:windows mpsystem.bak...it says that this file does not exist....any help would be greatly appreciated
View 10 Replies
View Related
Jun 29, 2010
whenever I boot the system, I come up with the following message: Windows could not start because the following file is missing or corrupt: <Windows root>system32 toskrnl.exe re-install a copy of the above file. every time I try to boot the CD, the same error message occurs. I've already tried to change the boot order so the CD-ROM drive would be first. I have also selected the CD-ROM drive to be the boot device, but the message always pops up.
View 3 Replies
View Related
May 16, 2010
I come to boot up the computerwhen booting in normal mode or safe mode I get the message system32/drivers/ntfs.sys is missing or corrupt please insert original windows disk and press 'r' on the first screen. so i put in the disk and it says boot CD but then after a while it just comes up with the same message telling me to insert original disk.I have tried this now with 2 different windows disks, iv changed to boot settings and this still does not work.
View 1 Replies
View Related
Sep 26, 2005
I'm getting a WINDOWSSYSTEM32CONFIGSYSTEM message all of a sudden!DESPERATELY need to copy some personal files somewhere before trying to restore / reformat
View 7 Replies
View Related
Jun 10, 2008
My computer, a dell dimension 8400 with windows xp home edition, keeps coming up with an error saying:Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32Configsystem.i ran boot utility and scanned the computer and the drives come up fine with the test(except the hard disk which popped up errors on a constant.)
View 14 Replies
View Related
Jun 8, 2006
i have windows xp pro installed on my pc along with linux mandrake 10.1 and one day while my dad was surfing the net the sreen turned blue and some type of error message came up and it said to do something if it happend again but i ignored it becuase i thought it wouldnt happen again so i restarted and when it came back on it went to a black sceen and i couldnt do anything but if i let it wait there it would come up with an error saying that windowssystem32config system was missing or corrupt
View 5 Replies
View Related
May 10, 2010
I'm running a Dell XPS 600 with Windows XP Professional Media Center Edition. Well, OK, it's not really running.I used System Restore to return my PC to a point about six weeks ago when the system was more stable. The PC rebooted, and now it won't boot any more due to a missing/corrupt CONFIGSYSTEM file.It won't boot from either of my CD drives, either. I've used the boot Setup to alter the boot sequence but that doesn't help, the system just doesnt recognize those drives during boot. For this same reason, I've been unable to access the Recovery Console.
View 5 Replies
View Related
Aug 23, 2007
I was on my computer when I was done I decided to actually turn it off which I never do I always leave it running. My computer was working completely fine I ran virus scans all that shizz, the next day I turn it on and it says:Windows could not start because the following file is missing or corrupt windowssystem 32configsystem You can attempt to repair this file by starting windows setup using the original setup CD-Rom. Select "r" at the first screen to start repair.
View 1 Replies
View Related
Sep 21, 2008
I'm on an older computer with Windows 2000 which has been working fine. Today, in the middle of doing nothing out of the ordinary, I got a blank screen. So I rebooted and was served up this error message: Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select 'r' at the first screen to start repair. I don't have the Setup disc but I do have the original program disc - but it wouldn't read it and keeps giving me the same error. I can't even start is Safe Mode.
View 8 Replies
View Related
May 8, 2006
i'm running windows xp home, on an emachine m6805 laptop. at some point yesterday my computer died and rebooted and now the hal.dll driver is missing or corrupted. i've tried various things from other threads such as safemode, last known configuration, recovery, etc. nothing worked. i've tried booting from cd with my xp discs but i think the problem i have is that my discs are recovery cds from emachines and i cant press "R" like everyone says to do. reformatting is not an option unless i take it to a computer repair shop to get all my info off that i need. what can i do? i read the kelly link that people always link to but it makes no sense. can anyone help? if you need more info just let me know.
View 8 Replies
View Related
Apr 8, 2007
I have encountered another problem!
Ok, so, my computer wouldn't boot up right? I had to repair the installation etc and activate Windows, which I did today. The just recently, I was in safe mode trying to fix the PC, and then it restarted, and now everytime I try to start it up, it says,
The file Windows...../config/SYSTEM is missing or corrupt and it says I have to repair Windows, using the disk.
View 11 Replies
View Related
Jul 13, 2005
I have a 2.4 2 gig ram and a raid hard drive on my computer with 4 x 80g I'm not that raid literate and a friend helped me set it up but I know my way a bit with computers. The other night all of a sudden the computer froze up and when I tried to restart it I got this message
windowssys32configsystem with the corrupt or missing system file. First I tried getting my windows CD and using the "r" option to repair it but when I do that I get this message "Setup did not find any hard drives on this computer etc..." I was perplexed by this and went into my bios and under primary hardrive it detected nothing. I hit ctrl S for the raid utility and in the raid options it shows the 4 hard drives. I opened the case made sure everything was connected right and the 4 hard drives are hot still.
View 11 Replies
View Related
Dec 22, 2009
My mother-in-law purchased a computer from V2 Premier 6 years ago. Her computer crashed and said the Windows XP is either missing or corrupt. There was not a Windows XP CD-Rom included in box with the computer. It says for repairs to insert the Windows XP CD-Rom. How does she get one sent to her from the manufacturer or from V2 Premier?
View 6 Replies
View Related
Sep 12, 2007
So I was working with adobe photoshop and it absolutely refused to exit. I tried ctrl+alt+delete and after about twenty minutes it was still frozen on my screen. So I tried shutting the computer down normally, and it froze on the "Windows is shutting down" screen for like, the fiftieth time. So I had to force it off by holding down the power button. When I turned it back on to continue working, I got a message saying windows/system32/config (or something like that) was missing or corrupt. I pressed "r" since I don't know where my startup disk is and it restarted.
I have Norton GoBack, so I hit the space-bar to allow it to restore to about an hour earlier before I opened photoshop. This wasn't the first time this had happened. I've been getting the same message at every other start up for a couple weeks and this method worked fine every time. It seemed to be okay this time too but then it just RESTARTED for no apparent reason. When it got to the Norton GoBack screen I got a message saying the system had become unstable and needed to start over, and it suggested it was possibly because of a bug in an application or a hardware problem which is also possible.
View 1 Replies
View Related
Jul 6, 2008
My problem started when I booted my computer. Windows (XP Home Edition) started with the message that windows/system32/config/system.sav was missing or corrupt. It told me to use the recovery console to solve the problem. I saw with the recovery console that the system.sav file wasn't missing so it had to be corrupt (0 bytes in filesize).
View 1 Replies
View Related
Jan 27, 2006
I bought a new hard drive and tried to load XP Home on it, and I keep getting the same error message "Windows System 32 hll.dll is missing or corrupt...." Does anyone have any suggestions on how to get rid of this? It happen when I initally load XP and then have to restart. Cannot go past this message.
View 2 Replies
View Related
Apr 17, 2009
I was on my computer today, programs started freezing up, eventually windows crashed. When rebooting I got the message I put in the subject title line "windows could not start because the following file windowssystem32configsystem is missing or corrupt".
View 17 Replies
View Related
Jul 28, 2009
Windows crashed on my PC, on reboot I get an error message,"WindowsSystem32ConfigSystem corrupt or missing"So I search around on my laptop and find handy registry repair walkthrough on the windows site. I pop in my windows xp cd and enter the repair console.Now, the instructions say I should be prompted to enter an admin password, but I am not promted, instead I just get to the command prompt."C:>"So I type in the first command on the list "md tmp" to make a temp file for the repair and then..."Access is Denied"
View 14 Replies
View Related
May 22, 2010
wen i start up my computer it comes up with this :windowssystem32configsystem....missing or corrupt you can attempt to repair this file by starting windows setup using the original setup CD-ROM . Select "R" at the first screen to start repair i hav no idea what this means or how to fix it . i hav the oorginal windows CD .
View 11 Replies
View Related
Jan 27, 2008
Windows could not start because the following file is missing or corrupt: /windows/system32/config/system
It states that I can put in the originial setup CD-ROM and select 'r' to start repair but that doesn't help me. My laptop did not come with a windows cd as I bought it preloaded from BestBuy. So about 4 years ago when my computer was overcome with the Sasser worm, I reformatted and loaded a friend of mine's Win XP Pro cd on my laptop. I still have the CD but when I hit 'r' (Boot partition recovery) it does its little DOS thing and then gives me a Disk I/O Error. I am thinking that maybe it is trying to boot from a floppy drive and not my CD drive and thats why I am getting the I/O error?
View 1 Replies
View Related
Nov 30, 2008
I have been searching for how to fix my son's computer which comes up with windows system32 config system - Windows could not start b/c the following file is missing or corrupt. He has a Dell and everything I've read seems to give warnings about doing recovery with a Dell. There was no OS CD with it.
View 14 Replies
View Related
Sep 20, 2005
When left for a while (about half an hour), I come back to it and see that the screen is black with something about a system disk error. I experienced this before I had to re-install windows a few weeks back.The first time, I pressed enter, and the system started up fine. The second time, the secondary loading screen (that's what I call it...it's like little white rectangles at the bottom of a black screen...you know the ne, right?). Well yeah that goes really really slow. When it get's a few inches in, it stops and tells me 'system32driverstfs.sys is missing or corrupt'.
View 1 Replies
View Related
