Missing Or Corrupt HAL.DLL - Boot Failed
Sep 15, 2008
Dell Inspiron 9100, 1 GB mem, 60 GB HD, Win XP Home 2002 SP3. Kept clean with TE Pro, cseraser, syswiper, Adaware, Spybot S&D, AWC V2, Regcure, RegscrubXP. McAfee current. Win XP SP's and updates current.
Boot failed after POST with (as near as I can remember, sorry!) "missing or corrupt HAL.DLL"
This has happened twice. The first time it happened (a year or so ago), I reinstalled XP. I also installed
a second installation of Win XP in a WINDOWS2 dir. Set up boot.ini to allow me to select WINDOWS or WINDOWS2 to boot from. Figured this would help if it happened again.
View 2 Replies
ADVERTISEMENT
May 10, 2008
Here goes, the other day I booted up my PC and it showed "windows can not boot, ntfs.sys is missing or corrupt" so I did this. Microsoft support. I replaced the file in the recovery console and everything copied over fine. Then I booted up again and I received an error message before windows displayed my login screen --lsass.exe "endpoint is invalid" click ok and my computer reboots. Windows at that time was booting all the way up though. I found this support article but did not help Microsoft support This error does not allow me to boot into safe mode or regular windows but I can get into the recovery console.
View 5 Replies
View Related
Jan 9, 2008
i have dual boot on two HD, both XP Pro SP2 suddenly one of them (drive C can not boot. "Missing or corrupt HAL.DLL" i have google & see Microsoft Knowledge and try some advice but still no work.
View 3 Replies
View Related
Feb 22, 2007
As the title says my pci.sys in the system32drivers folder is missing or is corrupt, so I can't boot windows. The only possible solution is to start the recovery console and type:set AllowAllPaths = true expand d:i386pci.sy_ c:windowssystemdrivers32 If you don't type set AllowAllPaths = true you can't access the windows folder, thus I cannot fic the pci.sys. Well the problem is I don't have the Set command enabled, and It can only be enabled with MMC, but how the hell am I supposed to enable the Set command when I cant access MMC? Dilemma >.< don't wanna reinstall Windows XP again... So is there a way to get Set AllowAllPaths = true to work without MMC?
View 2 Replies
View Related
Feb 21, 2007
I'm getting the System32driverspci.sys missing or corrupt message when trying to boot XP.Now, I've tried going to my recovery console and tryed "expand drive:i386pci.sy_ C:winntsystem32drivers /y" all I get is access denied. So then I re-booted from my XP disk and pressed enter to install windows xp. Now supposedly I sould get a repair "r" option, but I don't. It tells me I need to format to install. I guess when you recived that "r" option it will bring you the option of typing the admin passsword so I won't get the access denied message when I'm expanding.The bottom line is that there is one REALLY important folder I need of my C: drive and really don't care about anything else.
View 6 Replies
View Related
Jun 29, 2008
XP PRO SP2- Recieve the following message upon unsuccessful boot attempt. "WINDOWS COULD NOT START BECAUSE THE FOLLOWING FILE IS MISSING OR CORRUPT: <WINDOWS ROOT> SYSTEM32HAL.DLL (not yelling ) I have tried to boot from my xp pro cd to utilize the recover utility however the computer will not boot from the cd. I able to use a dos boot disk however my keyboard is USB and I cannot find USB drivers to work under dos, so I was unable to do anything at that point. It was my hope that I could work through dos to edit the boot.ini file.
I do not want to reinstall windows. If I have to I will place the hard drive in another computer as a slave and work on it that way but I'd rather not. The only other tower type computer I have other then laptops is running xp home SP2.
View 8 Replies
View Related
Dec 15, 2004
Windows couldnt start because following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM. You can attempt to repair file by starting Windows Setup using the original Setup CD-ROM. Select?r? at the first screen to start repair. what do do? takes me to repair consol and then? i tried to fixboot.
View 2 Replies
View Related
Jan 2, 2005
When Windows XP boots up, an error message states that a system file is corrupt or missing. Which command scans Windows system files for missing or corrupt operating systems files and replaces them with the correct Microsoft versions?
View 1 Replies
View Related
Feb 23, 2005
My friend's comp isnt working it gets the following error during boot up
"Windows could not start because the following file is missing or corrupt:
WINDOWSSYSTEM32CONFIGSYSTEM"
I tried the windows support method to recovering from a corrupt registry..after I created a temp folder I entered the first copy line copy c:windowssystem32configsystems c:windows mpsystem.bak...it says that this file does not exist....any help would be greatly appreciated
View 10 Replies
View Related
Jun 29, 2010
whenever I boot the system, I come up with the following message: Windows could not start because the following file is missing or corrupt: <Windows root>system32 toskrnl.exe re-install a copy of the above file. every time I try to boot the CD, the same error message occurs. I've already tried to change the boot order so the CD-ROM drive would be first. I have also selected the CD-ROM drive to be the boot device, but the message always pops up.
View 3 Replies
View Related
May 16, 2010
I come to boot up the computerwhen booting in normal mode or safe mode I get the message system32/drivers/ntfs.sys is missing or corrupt please insert original windows disk and press 'r' on the first screen. so i put in the disk and it says boot CD but then after a while it just comes up with the same message telling me to insert original disk.I have tried this now with 2 different windows disks, iv changed to boot settings and this still does not work.
View 1 Replies
View Related
Sep 26, 2005
I'm getting a WINDOWSSYSTEM32CONFIGSYSTEM message all of a sudden!DESPERATELY need to copy some personal files somewhere before trying to restore / reformat
View 7 Replies
View Related
Jul 18, 2005
I have had my Dell computer for about a month. When I boot up I get a message saying that I can't boot up because <windows root> System32NTOSKRNL.EXE is missing or corrupt. I get the same thing for system32DRIVERS NTFS.SYS.
View 2 Replies
View Related
Apr 22, 2008
My ntdetect.com file is missing(I believe it wound up in the recycle bin). I have read through pretty much every pre-existing thread on the subject. I have downloaded and make a disk of xpprobt.exe as suggested by one, and after a minute on uncomfortable waiting it spouts out that hal.dll is missing. I created an ms-dos diskette to try and copy the files manually to where they belong(I have a copy of hal.dll also) But I may not be the right disk, seeing as it was created on an XP sys. and the one not working is 2000 SP4. When loading the ms-dos disk it flashes an ME(?) logo. Not sure why but W/E Unfortunatly nothing but the dir ms-dos command actually Does anything, and trying to copy the files(yes, I used the correct command line) yields an Invalid Drive Specification Error(?) for some god-awful reason. Now i'm wondering what else I could do to fix it.
I have the links to the official microsoft boot disks and boot disk essentials here:
http://freepctech.com/pc/002/files010.shtml
Some of the other threads have other posted URL's for fixes; this is the only link still working at this time. I will be attempting to troubleshoot it myself using microsoft and disk essentials files on the site, while continuing to search the forums for any other posts related to this. Anyone know of a sure-fire quick fix that they could post that may not exist elsewhere on the site(or at the least, save time trying to find it)?
View 14 Replies
View Related
Dec 2, 2004
I have fixed this problem in the past in repair mode and i want to do the same with this, but, there is no filename at the end of the statement see below Windows could not start because the following file is corrupt or missing windowssystem32configsystem Can this be fixed in repair mode without having to be reformated or reimaged.
View 4 Replies
View Related
Jul 7, 2005
I've had the familiar hal.dll missing or corrupt on starting XP SP1 on a mainboard NameMSI KM2M Combo (MS-6738).All I did was to take out the 1 Gig of SDRAM I've used OK for months and fit a new 1 Gig DDR module. A year or two back I had STOP errors through merely changing a RAM module, the simplest upgrade usually, so I kept switching RAM until it went with no STOPs. I resent having to reinstall an OS for a five-minute RAM refit! Obviously the hal error is caused by the new DDR module, since I'm now using the old SDRAM. Is there a way around this apart from the dreaded reinstall of OS? In the rare event the DDR could be faulty does anyone know a non-windows DDR test utility please?
View 6 Replies
View Related
Jan 12, 2006
I restarted my computer today and right after it started booting from my C: drive, an error came up that said something like "Windows cannot find the file C:windowssystem32tfs.sys because it is missing or corrupted." It suggests that I use the recovery disk to fix it, but I don't have the recovery disk, so I'm kind of in trouble. Luckily, I had some Linux LiveCDs laying around, so I used one to boot up my system.I think that this might have something to do with me trying to change my boot screen, but I didn't mess with that particular file, so I'm not sure. Also, I haven't done anything to the RAM lately.
View 9 Replies
View Related
Oct 9, 2005
This is not your typical Hal.dll file is missing or corrupt. I've tried all the fixes, and am getting nowhere. This is a Windows XP Pro install.I tried chkdsk /R in the Windows XP Recovery Console first, and while it did complete, it reported that "the disk contains one or more unrecoverable problems." I also should note that Recovery Console did not ask me to identify the windows install, nor did it ask me to enter the Administrator password.Next, I tried bootcfg /rebuild and got "Error: failed to successfully scan disks for windows installations. This error may be caused by a corrut file system, which could prevent bootcfg from scanning.Use chkdsk to detact any errors."
View 1 Replies
View Related
Apr 22, 2007
Any way I can get one of these onto a thumbdrive from a laptop to reload into my computer?
View 3 Replies
View Related
Apr 17, 2008
I recently started up my computer and it said: ' This application has failed to start because MSVCP60.dll was not found. Re-installing this application may fix this problem.' I have tried chkdsk /r and safe mode but nothing.
View 14 Replies
View Related
Oct 9, 2010
I had problems right out of the gate...after typing out the first command line: tmpsystem.bak and hitting enter, I got the message that said could not find file...so I tried again and was extra diligent with my typing, but the same disappointing message came up.I decided to use some imagination and initiative and, started with the last command line first: tmpdefault.bak This worked for this line and then the next one too: tmpsecurity.bak and so on. When I got back to the tmpsystem.bak line, it even worked for that one too.
Then I moved on to the delete commands and that worked out OK...as far as I could tell?But, when I got to the repair lines and, in particular, the: repairsystem C:windowssystem32configsystem I then got the same message saying that the file could not be found...back to square one.Then I went back to the start...typing out the copy lines, and I got the same message for the system line again. So, I started from the default line again and it worked--I was asked if I wanted to re-write the first file copied and I chose Y (yes) then the same brick wall when I got to the system line.
View 14 Replies
View Related
Feb 23, 2005
My Hewlett Packard Pavilion ZT3000 notebook was running fine but then Windows wouldn't load and the message, "system32driverstfs.sys is missing or corrupt" came up. I'm using Windows XP.Only two things happened prior to this occurring, the lid got shut a little hard but no damage and I downloaded Servicepack 2.
I ran a HHD self test and it tested ok, all the help screens, etc. come up fine but not Windows.I have an operating disk and a recovery disk but neither seems to help
View 14 Replies
View Related
Aug 22, 2005
I just boot up my computer and a black screen (which i've seen before and has only led to re-install XP) came up saying the following file is missing or corrupt: /system/ntfs32(I don't recall the exact file name - next time I will write it down). But i'm sure many have experience with this.Now somehow I was still able to enter Windows after reboot and F8 (never happened before - i've always had to re-install). What can I do NOW to prevent this next time from happening and perhaps (almost certain actually) having to re-install Windows XP? Can I get that file from somwhere? Am I missing a service Pack? I have SP2 for Windows XP Professional version 2002. (I double checked My Computer>Properties).
View 8 Replies
View Related
Sep 21, 2008
I'm on an older computer with Windows 2000 which has been working fine. Today, in the middle of doing nothing out of the ordinary, I got a blank screen. So I rebooted and was served up this error message: Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select 'r' at the first screen to start repair. I don't have the Setup disc but I do have the original program disc - but it wouldn't read it and keeps giving me the same error. I can't even start is Safe Mode.
View 8 Replies
View Related
Jan 5, 2005
I have xp and when i start my cmputer i get this Windows could not start because the following file is missing or corrupt windowssystem32configsystem,I don't seam to be able to enter safe mode with f8 pressed.
View 1 Replies
View Related
Mar 27, 2007
When trying to turn on my computer i get the following message: Windows could not start because the following file is missing or corrupt: Windowssystem32configsystem You can attempts top repair this file by starting Windows Setup using the original Setup CD-ROM Select 'r' at the first screen to start repair. i have done endless searches on my desktop to try to find a step by step out of this problem. i have followed such things as: >>Problem: You turn off your computer one day and then go to restart to find an error message that says: Windows could not start because the following file is missing or corrupt C:windowssystem32configsystem You can attempt to repair this file by starting windows setup using the original setup CD-Rom. Select "r" at the first screen to start repair.
View 14 Replies
View Related
Aug 24, 2005
Winows says file windowssystems32configsystem is corrupt or missing. It says that I can attempt repair using the original setup CD Rom and typing "R" at the first screen. I have an Emachine 4160. It was loaded at time of purchase and only recovery disc were supplied. I can reboot with the recovery disc but " how can I save my pictures "? Attempts to enter safe mode have been unsuccessful.
View 2 Replies
View Related
Sep 21, 2009
I shut down my laptop before I left last night and when I hope, my system didnt shut down all the way and there was a blue screen saying an error had occurred and if this was the first time I had seen the message to shut the ocmputer down and restart it.I did as instructed. When I powered it back up, I recieved a message saying Windows could not start because the following file is missing or corrupt:<Windows root"system32
toskrnl.exe. Please reinstall a copy of the above file.The problem is, I don't have the XP cd as my laptop came pre-installed. A friend suggested I go into the safe mode and do a system restore to the last saved date.
View 1 Replies
View Related
Sep 15, 2006
I have a big problem. My CFOs computer has been messed up with the uninstallation of Norton. The computer will not boot after trying to run Autocheck (file is missing or corrupt) and the gives an error. I tried to use the Windows XP disc and the setup sees the partition but cannot recognise the format.Unfortunatley I don't know any commands in command line / repair console. Does anyone know commands to get the machine to run checks / get the machine to install XP? Formatting is the last option as there are some data on the machine that is not backed up.
View 2 Replies
View Related
Sep 4, 2009
I have a system that operates on Windows NT 4.0 Workstation.It's a fairly old computer, more than 5 years. During the night the fan in the powersupply stopped working, so the computer over heated. When I came to work in the morning it had the blue death screen of gibberish.I rebooted and it doesn't go through the whole boot up sequence but gives the following message:Windows NT could not start because the following file is missing or corrupt: <winnt root>system32 toskrnl.exe Please re-install a copy of the above file.
View 5 Replies
View Related
May 8, 2006
i'm running windows xp home, on an emachine m6805 laptop. at some point yesterday my computer died and rebooted and now the hal.dll driver is missing or corrupted. i've tried various things from other threads such as safemode, last known configuration, recovery, etc. nothing worked. i've tried booting from cd with my xp discs but i think the problem i have is that my discs are recovery cds from emachines and i cant press "R" like everyone says to do. reformatting is not an option unless i take it to a computer repair shop to get all my info off that i need. what can i do? i read the kelly link that people always link to but it makes no sense. can anyone help? if you need more info just let me know.
View 8 Replies
View Related
