Can Not Boot - Ntfs.sys Missing Or Corrupt
May 10, 2008
Here goes, the other day I booted up my PC and it showed "windows can not boot, ntfs.sys is missing or corrupt" so I did this. Microsoft support. I replaced the file in the recovery console and everything copied over fine. Then I booted up again and I received an error message before windows displayed my login screen --lsass.exe "endpoint is invalid" click ok and my computer reboots. Windows at that time was booting all the way up though. I found this support article but did not help Microsoft support This error does not allow me to boot into safe mode or regular windows but I can get into the recovery console.
View 5 Replies
ADVERTISEMENT
May 16, 2010
I come to boot up the computerwhen booting in normal mode or safe mode I get the message system32/drivers/ntfs.sys is missing or corrupt please insert original windows disk and press 'r' on the first screen. so i put in the disk and it says boot CD but then after a while it just comes up with the same message telling me to insert original disk.I have tried this now with 2 different windows disks, iv changed to boot settings and this still does not work.
View 1 Replies
View Related
May 25, 2006
XP pro computer tells me this when i turn it on. Offers to load in safe mode first, then tells me its lost/broken this file, push r to repair. Push r and it restarts. Cant work out how to fix this problem, and not liking the name ntfs in the error at all.
View 6 Replies
View Related
Jul 25, 2004
I plugged in and switched it on it has been crashing intermittently. This occurs at random intervals and does not seem to be related to whichever program I am using. The monitor goes black and the pc reboots but does not get as far as windows,displaying the message:windows could not start because the following file is missing or corrupt: System32/Drivers/Ntfs.sys"unable to do this because after pressing "r" at the first "welcome to set-up" screen I get the message:
"Setup did not find any hard disk drive(s) installed on your computer. Make sure any hard disk drives are powered up and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or Setup program.
Setup cannot continue. To exit Setup press F3"
View 14 Replies
View Related
Sep 20, 2005
When left for a while (about half an hour), I come back to it and see that the screen is black with something about a system disk error. I experienced this before I had to re-install windows a few weeks back.The first time, I pressed enter, and the system started up fine. The second time, the secondary loading screen (that's what I call it...it's like little white rectangles at the bottom of a black screen...you know the ne, right?). Well yeah that goes really really slow. When it get's a few inches in, it stops and tells me 'system32driverstfs.sys is missing or corrupt'.
View 1 Replies
View Related
May 12, 2007
Early last week I ran a Windows update on my Compaq SR1625NX and upon restart it would not boot Windows. I tried "last good configuration", "debug mode" and "safe mode" to no avail. It always restarts while booting Windows. I tried both the built-in "recovery console" and the recovery discs I bought from HP/Compaq upon the advise of an online support person. When loading the recovery console either way the blue screen pops up and tells me there is a problem with the "ntfs.sys" file.
View 10 Replies
View Related
Sep 15, 2008
Dell Inspiron 9100, 1 GB mem, 60 GB HD, Win XP Home 2002 SP3. Kept clean with TE Pro, cseraser, syswiper, Adaware, Spybot S&D, AWC V2, Regcure, RegscrubXP. McAfee current. Win XP SP's and updates current.
Boot failed after POST with (as near as I can remember, sorry!) "missing or corrupt HAL.DLL"
This has happened twice. The first time it happened (a year or so ago), I reinstalled XP. I also installed
a second installation of Win XP in a WINDOWS2 dir. Set up boot.ini to allow me to select WINDOWS or WINDOWS2 to boot from. Figured this would help if it happened again.
View 2 Replies
View Related
Jan 9, 2008
i have dual boot on two HD, both XP Pro SP2 suddenly one of them (drive C can not boot. "Missing or corrupt HAL.DLL" i have google & see Microsoft Knowledge and try some advice but still no work.
View 3 Replies
View Related
Feb 22, 2007
As the title says my pci.sys in the system32drivers folder is missing or is corrupt, so I can't boot windows. The only possible solution is to start the recovery console and type:set AllowAllPaths = true expand d:i386pci.sy_ c:windowssystemdrivers32 If you don't type set AllowAllPaths = true you can't access the windows folder, thus I cannot fic the pci.sys. Well the problem is I don't have the Set command enabled, and It can only be enabled with MMC, but how the hell am I supposed to enable the Set command when I cant access MMC? Dilemma >.< don't wanna reinstall Windows XP again... So is there a way to get Set AllowAllPaths = true to work without MMC?
View 2 Replies
View Related
Feb 21, 2007
I'm getting the System32driverspci.sys missing or corrupt message when trying to boot XP.Now, I've tried going to my recovery console and tryed "expand drive:i386pci.sy_ C:winntsystem32drivers /y" all I get is access denied. So then I re-booted from my XP disk and pressed enter to install windows xp. Now supposedly I sould get a repair "r" option, but I don't. It tells me I need to format to install. I guess when you recived that "r" option it will bring you the option of typing the admin passsword so I won't get the access denied message when I'm expanding.The bottom line is that there is one REALLY important folder I need of my C: drive and really don't care about anything else.
View 6 Replies
View Related
Jun 29, 2008
XP PRO SP2- Recieve the following message upon unsuccessful boot attempt. "WINDOWS COULD NOT START BECAUSE THE FOLLOWING FILE IS MISSING OR CORRUPT: <WINDOWS ROOT> SYSTEM32HAL.DLL (not yelling ) I have tried to boot from my xp pro cd to utilize the recover utility however the computer will not boot from the cd. I able to use a dos boot disk however my keyboard is USB and I cannot find USB drivers to work under dos, so I was unable to do anything at that point. It was my hope that I could work through dos to edit the boot.ini file.
I do not want to reinstall windows. If I have to I will place the hard drive in another computer as a slave and work on it that way but I'd rather not. The only other tower type computer I have other then laptops is running xp home SP2.
View 8 Replies
View Related
Dec 15, 2004
Windows couldnt start because following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM. You can attempt to repair file by starting Windows Setup using the original Setup CD-ROM. Select?r? at the first screen to start repair. what do do? takes me to repair consol and then? i tried to fixboot.
View 2 Replies
View Related
Jan 2, 2005
When Windows XP boots up, an error message states that a system file is corrupt or missing. Which command scans Windows system files for missing or corrupt operating systems files and replaces them with the correct Microsoft versions?
View 1 Replies
View Related
Feb 23, 2005
My friend's comp isnt working it gets the following error during boot up
"Windows could not start because the following file is missing or corrupt:
WINDOWSSYSTEM32CONFIGSYSTEM"
I tried the windows support method to recovering from a corrupt registry..after I created a temp folder I entered the first copy line copy c:windowssystem32configsystems c:windows mpsystem.bak...it says that this file does not exist....any help would be greatly appreciated
View 10 Replies
View Related
Jun 29, 2010
whenever I boot the system, I come up with the following message: Windows could not start because the following file is missing or corrupt: <Windows root>system32 toskrnl.exe re-install a copy of the above file. every time I try to boot the CD, the same error message occurs. I've already tried to change the boot order so the CD-ROM drive would be first. I have also selected the CD-ROM drive to be the boot device, but the message always pops up.
View 3 Replies
View Related
Sep 26, 2005
I'm getting a WINDOWSSYSTEM32CONFIGSYSTEM message all of a sudden!DESPERATELY need to copy some personal files somewhere before trying to restore / reformat
View 7 Replies
View Related
Jul 18, 2005
I have had my Dell computer for about a month. When I boot up I get a message saying that I can't boot up because <windows root> System32NTOSKRNL.EXE is missing or corrupt. I get the same thing for system32DRIVERS NTFS.SYS.
View 2 Replies
View Related
Jun 7, 2005
Im doing a clean, brand spanking new install on a machine that has no floppy drive. I have switched around the boot sequence in the BIOS to boot the CD ROM first, and that recognizes the disc ok. Windows formats the unpartitioned hard drive to NTFS. At first I got an error saying the NTFS.SYS file was corrupt, so I wiped everything out, and began again. This time I partitioned the hard drive first, and it seems to want to go futher, and I no longer get the NTFS.SYS error, but when it begins copying files, it hangs at about 18 percent when it starts copying 'driver.cab' and I get a Blue Screen saying PFN_LIST_CORRUPT.
View 9 Replies
View Related
Sep 28, 2009
I was recently in the middle of doing a chkdsk /f when it froze at 2% for almost an hour.... So I did a hard reset and now I get a BSoD with "Stop error: 0x00000024" which I'm assuming has something to do with the ntfs.sys file? I do not have my original XP installation disc and I cannot boot into safe mode (BSoD also.) The only thing I have is an Ubuntu live CD.. Anything I can do to fix it?
View 3 Replies
View Related
Sep 28, 2009
I was recently in the middle of doing a chkdsk /f when it froze at 2% for almost an hour.So I did a hard reset and now I get a BSoD with "Stop error: 0x00000024" which I'm assuming has something to do with the ntfs.sys file? I do not have my original XP installation disc and I cannot boot into safe mode (BSoD also.) The only thing I have is an Ubuntu live CD
View 1 Replies
View Related
Mar 28, 2007
Does anyone know how to fix a Ntfs.sys file without resorting to using the OS installation CDs? I got the message the about Windows not being able to start because of a missing or corrupt Ntfs.sys. Because I don't have the installation CDs I just copied a Ntfs.sys file off the other PC in our house put it on my flash disk and restarted the PC with this message. It booted up fine into windows but my system is unstable, it restarts at random. Sometimes it works ok and then sometimes it reboots repeatedly, and I got the message again a few times but I just press the reset button and it boots up fine again. So I am able to work in windows, can I fix the file in windows without doing that whole thing with the installation CDs and RC session?
View 2 Replies
View Related
May 1, 2008
So my computer has been running perfectly normal lately (with the exception of a Vundo trojan infection, which I removed about 2 days prior to this)Last night I was burning a DVD (I do this all the time) and a couple hours later when I look at my computer it's at a black DOS-like screen that says the following:"Windows could not start because the following file is missing or corrupt: System32/Drivers/Ntfs.sys"
My computer is a Gateway, so I have their restore disk. I really don't want to have to reformat Windows though. Is there another way to fix this? I have the option to "Repair" using the Gateway restore disks too, but I'm worried that will either delete my files or screw something up
View 14 Replies
View Related
Dec 2, 2004
I have fixed this problem in the past in repair mode and i want to do the same with this, but, there is no filename at the end of the statement see below Windows could not start because the following file is corrupt or missing windowssystem32configsystem Can this be fixed in repair mode without having to be reformated or reimaged.
View 4 Replies
View Related
Jul 7, 2005
I've had the familiar hal.dll missing or corrupt on starting XP SP1 on a mainboard NameMSI KM2M Combo (MS-6738).All I did was to take out the 1 Gig of SDRAM I've used OK for months and fit a new 1 Gig DDR module. A year or two back I had STOP errors through merely changing a RAM module, the simplest upgrade usually, so I kept switching RAM until it went with no STOPs. I resent having to reinstall an OS for a five-minute RAM refit! Obviously the hal error is caused by the new DDR module, since I'm now using the old SDRAM. Is there a way around this apart from the dreaded reinstall of OS? In the rare event the DDR could be faulty does anyone know a non-windows DDR test utility please?
View 6 Replies
View Related
Jan 12, 2006
I restarted my computer today and right after it started booting from my C: drive, an error came up that said something like "Windows cannot find the file C:windowssystem32tfs.sys because it is missing or corrupted." It suggests that I use the recovery disk to fix it, but I don't have the recovery disk, so I'm kind of in trouble. Luckily, I had some Linux LiveCDs laying around, so I used one to boot up my system.I think that this might have something to do with me trying to change my boot screen, but I didn't mess with that particular file, so I'm not sure. Also, I haven't done anything to the RAM lately.
View 9 Replies
View Related
Oct 9, 2005
This is not your typical Hal.dll file is missing or corrupt. I've tried all the fixes, and am getting nowhere. This is a Windows XP Pro install.I tried chkdsk /R in the Windows XP Recovery Console first, and while it did complete, it reported that "the disk contains one or more unrecoverable problems." I also should note that Recovery Console did not ask me to identify the windows install, nor did it ask me to enter the Administrator password.Next, I tried bootcfg /rebuild and got "Error: failed to successfully scan disks for windows installations. This error may be caused by a corrut file system, which could prevent bootcfg from scanning.Use chkdsk to detact any errors."
View 1 Replies
View Related
Apr 22, 2007
Any way I can get one of these onto a thumbdrive from a laptop to reload into my computer?
View 3 Replies
View Related
Oct 9, 2010
I had problems right out of the gate...after typing out the first command line: tmpsystem.bak and hitting enter, I got the message that said could not find file...so I tried again and was extra diligent with my typing, but the same disappointing message came up.I decided to use some imagination and initiative and, started with the last command line first: tmpdefault.bak This worked for this line and then the next one too: tmpsecurity.bak and so on. When I got back to the tmpsystem.bak line, it even worked for that one too.
Then I moved on to the delete commands and that worked out OK...as far as I could tell?But, when I got to the repair lines and, in particular, the: repairsystem C:windowssystem32configsystem I then got the same message saying that the file could not be found...back to square one.Then I went back to the start...typing out the copy lines, and I got the same message for the system line again. So, I started from the default line again and it worked--I was asked if I wanted to re-write the first file copied and I chose Y (yes) then the same brick wall when I got to the system line.
View 14 Replies
View Related
Feb 23, 2005
My Hewlett Packard Pavilion ZT3000 notebook was running fine but then Windows wouldn't load and the message, "system32driverstfs.sys is missing or corrupt" came up. I'm using Windows XP.Only two things happened prior to this occurring, the lid got shut a little hard but no damage and I downloaded Servicepack 2.
I ran a HHD self test and it tested ok, all the help screens, etc. come up fine but not Windows.I have an operating disk and a recovery disk but neither seems to help
View 14 Replies
View Related
Aug 22, 2005
I just boot up my computer and a black screen (which i've seen before and has only led to re-install XP) came up saying the following file is missing or corrupt: /system/ntfs32(I don't recall the exact file name - next time I will write it down). But i'm sure many have experience with this.Now somehow I was still able to enter Windows after reboot and F8 (never happened before - i've always had to re-install). What can I do NOW to prevent this next time from happening and perhaps (almost certain actually) having to re-install Windows XP? Can I get that file from somwhere? Am I missing a service Pack? I have SP2 for Windows XP Professional version 2002. (I double checked My Computer>Properties).
View 8 Replies
View Related
Sep 21, 2008
I'm on an older computer with Windows 2000 which has been working fine. Today, in the middle of doing nothing out of the ordinary, I got a blank screen. So I rebooted and was served up this error message: Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select 'r' at the first screen to start repair. I don't have the Setup disc but I do have the original program disc - but it wouldn't read it and keeps giving me the same error. I can't even start is Safe Mode.
View 8 Replies
View Related
