Windows xp crashed, wont even open. I get an error: <windows root> / system32/hal.dll is missing or corrupt. I dont have a xp disk, it did not come with the pc when i bought it. Came with xp already on it.
View 17 RepliesMy computer crashed and when i started it back up i got a black screen saying 'system32 is corrupt or missing' or something similar to that, so we reformatted it, now there are problems.It refuses to update. It was reformatted early yesterday, but it hasn't run a single update.i can't go to the Microsoft website and manually download the important updates, because after i hit download i get a 'page cannot be displayed' notice.Internet explorer won't open. not a big deal for me because i use Firefox, but my dad uses IE. when i try to open it i get a 'IE has encountered a problem and needs to close' notice. No page pops up or anything. I've been trying to convince my dad to get a new computer for years, and he always said 'not until this one's completely dead'
View 2 Replies View RelatedI am getting the following error and it loops: "file is missing or corrupt windows root system32 hal.dll" When I try and run the windows cd and either wipe or repair the error it tells me that the "the setup did not find hard drive disks" Now I am thinking the hard drive is defective?? Or do I have a virus?
View 14 Replies View RelatedMy Hewlett Packard Pavilion ZT3000 notebook was running fine but then Windows wouldn't load and the message, "system32driverstfs.sys is missing or corrupt" came up. I'm using Windows XP.Only two things happened prior to this occurring, the lid got shut a little hard but no damage and I downloaded Servicepack 2.
I ran a HHD self test and it tested ok, all the help screens, etc. come up fine but not Windows.I have an operating disk and a recovery disk but neither seems to help
Last night while watching the news, my computer rebooted all on it's own way over on the other side of the room and now I have the following error message. Windows could not start because the folowing file is missing or corrupt System32/drivers/ntfs.sys. I will boot up if I try several times but even after doing a system restore I get the same message plus sometimes I get Windows could not start because the folowing file is missing or corrupt System32/drivers/pci.sys
View 10 Replies View RelatedI have been getting Norton (Corporate, installed by someone else) notificatons for a few weeks about a Trojan (cache.cachekit) and Norton could not get rid of it. Now I cant boot up and it tells me my file(System32/system/config) is missing or corrupt. I was thinking it was my Trojan I couldnt get rid of, what do you think? Also, my OS was installed by someone else so I didnt have my own disk, however I have ordered one and it should come in a week. If it is my elusive Trojan, for one, how do I get rid of it for good, and also, when I get my disk I dont know exactly what to do to fix the computer. I cant bring it up in safemode either. I have never installed a OS, but I have installed other software-on a properly functoning computer that is. Do I absolutely have to wipe my hardrive clean, and if so, how do I do it?
View 2 Replies View RelatedI've just turned my notebook on this morning and a screen came up "Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM" It then tells me that I can fix the problem using the original Setup CD-ROM... The problem is, in the last couple of years that I've had it we've moved twice and are about to move again and I can't find it anywhere! And, I need the computer for work. Is there any way I can do this without the CD?
View 1 Replies View RelatedXP pro computer tells me this when i turn it on. Offers to load in safe mode first, then tells me its lost/broken this file, push r to repair. Push r and it restarts. Cant work out how to fix this problem, and not liking the name ntfs in the error at all.
View 6 Replies View Relatedhow can solve this problem please tell me.can i use any free softwere to solve this problem.
View 2 Replies View RelatedI was playing Medieval II: Total War and the computer crashes. Then when I try to boot it up I get Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM. I've checked BIOS for the boot procedure, and everything seems to be in order. I then go through the regular procedure of putting in the CD to run the repair. I boot from the CD, it loads up fine... but there are no partitions and no option to enter the recovery console (which I've read so many wonderful things about).
So now I'm sort of stuck. There's no options other than install and delete the selected (none) partition. If I hit delete (b/c in anger sometimes I'm an idiot) it tells me it's a system partition and there could be VALUABLE system information like AN OS (I'm fuming at this point). NO... I did not delete it. If I hit install, I get a bunch of bogus about how "Setup cannot install to the selected partition.
When I turn on comp. get the mssg: Windows couldn't start following file missing <Windows root>/system32/hal.dll Reinstall copy of file Recovery does not work. Tried to boot from a cd (changed BIOS to cd as 1st boot device) with win xp setup boot disk downloaded from MS site. Get same error mssg.
View 6 Replies View RelatedSo I was working with adobe photoshop and it absolutely refused to exit. I tried ctrl+alt+delete and after about twenty minutes it was still frozen on my screen. So I tried shutting the computer down normally, and it froze on the "Windows is shutting down" screen for like, the fiftieth time. So I had to force it off by holding down the power button. When I turned it back on to continue working, I got a message saying windows/system32/config (or something like that) was missing or corrupt. I pressed "r" since I don't know where my startup disk is and it restarted.
I have Norton GoBack, so I hit the space-bar to allow it to restore to about an hour earlier before I opened photoshop. This wasn't the first time this had happened. I've been getting the same message at every other start up for a couple weeks and this method worked fine every time. It seemed to be okay this time too but then it just RESTARTED for no apparent reason. When it got to the Norton GoBack screen I got a message saying the system had become unstable and needed to start over, and it suggested it was possibly because of a bug in an application or a hardware problem which is also possible.
My problem started when I booted my computer. Windows (XP Home Edition) started with the message that windows/system32/config/system.sav was missing or corrupt. It told me to use the recovery console to solve the problem. I saw with the recovery console that the system.sav file wasn't missing so it had to be corrupt (0 bytes in filesize).
View 1 Replies View Relatedhow to fix dell computer window root system32 ntoskrnl exe missing or corrupt
View 1 Replies View RelatedWindows could not start because the following file is missing or corrupt: /windows/system32/config/system
It states that I can put in the originial setup CD-ROM and select 'r' to start repair but that doesn't help me. My laptop did not come with a windows cd as I bought it preloaded from BestBuy. So about 4 years ago when my computer was overcome with the Sasser worm, I reformatted and loaded a friend of mine's Win XP Pro cd on my laptop. I still have the CD but when I hit 'r' (Boot partition recovery) it does its little DOS thing and then gives me a Disk I/O Error. I am thinking that maybe it is trying to boot from a floppy drive and not my CD drive and thats why I am getting the I/O error?
My pc won't boot into windows...i get this error. I don't have a copy of XP to try and repair because i bought my PC from futureshop with XP pre-loaded..... anyway of fixing this without having a copy of xp?
View 14 Replies View RelatedI come to boot up the computerwhen booting in normal mode or safe mode I get the message system32/drivers/ntfs.sys is missing or corrupt please insert original windows disk and press 'r' on the first screen. so i put in the disk and it says boot CD but then after a while it just comes up with the same message telling me to insert original disk.I have tried this now with 2 different windows disks, iv changed to boot settings and this still does not work.
View 1 Replies View RelatedWhen I start up my laptop, the screen immediatly says Windows could not start because the following file is missing or corrupt: windowssystem32configsystem
You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select 'r' at the first screen to start repair.The deal is I dont have the cd. IF someone could tell me how to get an xp cd (without buying) that'd be great.
I have had my Dell computer for about a month. When I boot up I get a message saying that I can't boot up because <windows root> System32NTOSKRNL.EXE is missing or corrupt. I get the same thing for system32DRIVERS NTFS.SYS.
View 2 Replies View Relatedwhile logged into Windows, the IDE cable that is connected to my HD went bad. I double checked this by replacing the cable and seeing if the BIOS could see it, which it could. When I tried to log back into Windows however I got this message. Code: Windows could not start becuase the following file is missing or corrupt:WINDOWSSYSTEM32CONFIGSYSTEMYou can attempt to repair this file by starting Windows Setup using the orginal Setup CD-ROM.Select 'r' at the first screen to start repair.I'm not sure how this works. Do I hit 'r' at the blue screen after it loads all the drivers or do let it setup and I will get a chance to choose a repair option. The error only effects Windows. I know for sure because I have a Linux partition that works fine. I have my orgainl Windows XP CD- ROM. Does anyone know the steps to fix this? Windows XP SP2 (Fully upgraded)(CD-ROM is the orginal XP SP1 disk)
View 3 Replies View Relatedmy file windows/system32/config/system is corrupt. it says i can boot with the CD and use the "R"epair function. I do that and it takes me to DOS where I can roam around my harddrive and the windows CD. now how do I find this file to replace it? because on the windwos CD there is no "system" file in the directory I386/system32/config/. I've tried to copy it from my other computer, but since it's using the file I cant'!
View 2 Replies View RelatedI have a IBM comnputer and I used my sisters reboot disks. She has a set of five disks to use.. they say IBM/Leveno ghost. When I tried to wipe my system clean and reboot, it said "the following file is missing or corrupt" /WINDOWS/system32/config/SYSTEM
View 6 Replies View RelatedIt worked fine for a few days, then I got this blue screen that said I have a system error and that I am missing a file or it is corrupt c:windowssystem32configsystem.Now, this was fine because I thought I knew the answer to this problem, which is incidentally the answer to another recent problem posted on this board, it can be found here:URL...I performed the operation, and again, it was all well and good for a few days.Then I got the same problem again. I used the same solution to make a fix.Then it happened again.So, my question is what's the problem? Do I have a hardware problem? I even used two different WinXp install discs to solve this problem on different occasions since I only needed the recovery console and I thought that the original disc might have become damaged or something.
View 13 Replies View RelatedWhen trying to install Windows XP Home I get an error saying
The following value in the .SIF files is missing or corrupt.
Value 0 on the line in the section [SourceDisksFiles] with key "SP2.cab."
What is this?
While formatting my system i am facing a problem. the system is showing the following problem.
Windows could not start because the following file is missing or corrupt:
<windos root>system32dal.dll.Please re install a copy of above file
But anyways i'm major computer problems. I have a Windows xp Compaq computer and im getting an error that says
<Windows root>system32hal.dll. is missing or corrupt.
Please install a copy of this file.
so i dont have that file and i was wondering whats wrong and what to do?
I have a workstation running XP Pro that displays the following error message.Windows could not start because the following file is missing or corrupt.Windows rootsystem32hal.dll. Please re-install a copy of the above file.I did get the machine to at least prompt me for OS choice, yet Windows 2000 Professional was the only OS option listed..
View 5 Replies View RelatedI have a Rock CTX Pro with Windows XP Pro, service pack 3, 2.33 GHZ dual core. When loading my computer, after getting to the loading windows page, it brings up an error message that says: The following file is missing or corrupt: Windowssystem32configSYSTEM
View 4 Replies View RelatedI jus put together my own system. I bought a P4 511 processor and an ASUS P5P800-MX motherboard and two 512 MB sticks of RAM I'm using my old 40 GB harddrive from my previous computer. I had installed Windows XP Professional with SP2 and it all worked fine. I then turned my computer off for the night and the next day when I started the computer it would not boot into windows it showed the error message "The following Windows file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM". I booted from the windows XP cd and went into the recovery console and used CHKDSK /R and when that finished Windows booted up fine. However everytime i turn the PC off the error occurs again. Any ideas how to fix this problem permanantly instead of jus until the next reboot?
View 8 Replies View RelatedI bought a new hard drive and tried to load XP Home on it, and I keep getting the same error message "Windows System 32 hll.dll is missing or corrupt...." Does anyone have any suggestions on how to get rid of this? It happen when I initally load XP and then have to restart. Cannot go past this message.
View 2 Replies View Relatedi had installed windows media center as my second os.i already had server edition on my pc.i cant be able to work now on server as a message is generating during booting hal.dll is missing or corrupt.please reinstall or copy this file.so how to sort out this problem with out re installation of server edition so that i can have my data undisturbed.
View 1 Replies View Related