After doing 'One Button Checkup' I get an error. Missing File:"CProgram FilesCommonFilesInstallShieldProfessinalRunTime701Intel 32DotNet.Installer.exe" (cannot access a necessary file "mscoree.dll") Win Doctor is unable to find & replace it, so it must have been deleted after Installation or later, ..... it doesn't seem to affect the computer so far, is it necessary to replace & would I be able to extract & replace it from original Windows XP disc, or would it only be possible by re-installing Windows XP?
I am helping a friend with his computer and after running norton systemworks it says that he is missing mscoree.dll and some things might not operate right without it. now that I have downloaded that file, where do I put it?
I have fixed this problem in the past in repair mode and i want to do the same with this, but, there is no filename at the end of the statement see below Windows could not start because the following file is corrupt or missing windowssystem32configsystem Can this be fixed in repair mode without having to be reformated or reimaged.
PC wont boot up any more , it says there could be a currupt or missing file , it says its config system and says it might be able to repair the file using the install disc. i have a System Recovery CD-ROM
after installing acrobat on my machine, I realised that my FILE print port for postscript printing had been deleted. Need help to reinstall the print port.
So my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message.... Windows could not start because the following file is missing or corrupt: windowssystem32configSYSTEM Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair. So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts. I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
I run a specific batch file at startup that attempts to copy a file to lace one that is under control of a running program. I get the messageThe process cannot access the file because it is being used by anotherprocess."How do I successfully write the file? I know that the way you are supposed to do it is to close the program, make the transfer then restart the program. But how do you do that when you don't know the programand you don't know how it starts in the first place.
I can't install my printer because this file is missing or not right. I tried another solution, but my RunOnce file is not missing. Can anyone help? Windows XP OS trying to install a HP D4160 printer.
was getting a blue screen 07A was told by computer techs without looking it was either my hard drive or my operating system. Checked my hard drive several different ways and no problems. So I went to do a Windows XP repair instead of complete reinstall as they are a pain. After a long time it came back that couldn't do this because SPCMDCOM>SYS file was missing and couldn't repair from recovery console without it. My hard drive was replaced by Dell in July of 05 I think. What can I do without going to extremes? Secondly can I install my cd/dvd rom on my other Dell PC with discs I already have? I am very aggravated. I want to try to save at least 1 computer. On the 1st PC about 2 months ago I had my 17 inch flat panel go out it starts but then go black, I am using the 2nd computers screen!
I am trying to access the file properties area on a .jpg file. I like to put the descrepption of the picture in the PROPERTY section of the file where is says SUMMARY. I have typed in the description and save it but when I go back to the file there is nothing there. (I right click on the file and go to PROPERTIES and then click on SUMMARY-ADVANCED) .
I have a pc that has mine and a roomates account on it.it would not finish booting to the main Windows desktop screen.It sits at the "Windows XP Home Edition" loading screen for about 2 or so min. then goes black for another 2 min. then a little white arrow cursor comes up and the screen is still black. After 2 more min. a grey warning box appears and says the following:Isass.exe Was not able to find SAMSRV.dll file, reistall this try again..bla bla bla have a nice day.In short my pc is at this moment a 20lb door stop.I had a friend a couple years back take his old XP disc and somehow fix a simular issue.Least I thought thats what he did.I dont know his where abouts and I've seen some other forum's 3 year old thread mention how to repair the file, by reinstalling the entire Windows program.
I'm battling spyware removal at the moment (aurora) and somehow my win xp sp2 search function no longer works. i get an error "A File That Is Required to Run Search Companion Cannot Be Found" you may need to run setup I went to the microsoft website and downloaded the hotfix, however it doesn't work with sp2! anybody know how to fix this? I checked and i do have the srchasst folder in windows.
when I start my ms outlook 2007 I get this error. "Errors have been detected in the file 'file_path'. Quit all mail-enabled applications, and then use the Inbox Repair Tool." I tried to scan with scanpst.exe but it went in vain.I tried it with other applications it worked fine.But,the problem is they all are demo versions and I gets back only 5 to 6 mails for more mails i have to buy that applications. Do we have any free tool that can fix my problem or any other way to fix this.
Running Disk Cleanup, when this Windows File Protection comes up saying a system file has been replaced with a unrecognized one. It wants me to put in my Operating System CD, but I don't have one. I bought this computer and the required files are already on the computer. So what should I do?
Wireless network at home.Folder on main computer set for sharing AND allows adjustments.open the jpg file on another computer.Adjust it and try to SAVE the file and get cannot access this file check security privileges over the network drive.
Failed boot and inability to read the file system from a boot cd.
I did a chkdsk /r on the drive, and the file system is back. Ive also done a pass on the drive with a virus scanner and noticed a folder C:Program FilesCommon FilesServices" with the all of the files consisting of randomly generated executable names (514 in total), refer to attached text file for full list.
In explorer, the files show as green.
The problem is the virus scanner logs the file as "access denied".
The file initially had security permissions set to everyone with write only and the owner was some wierd clsid like object.
I have a Dell 4500 using Windows XP who's processor died. I removed the hard drive and attached it to my Dell 1150 via a IDE/USB adapter kit. It appears that everything is available. However, when I go to 'Documents and SettingsJustJeff206documents it states that it is not accessible and that Access is denied. Other files that are not under my directory can be accessed. I have run Chkdisk with no problems detected.
I have 2 XP's PC, 1 was recently rebuilt last week. On the rebuilt PC, I created 2 shared folders and access to the shared folder files was working. I created 3 new accounts (1 admin and 2 power users) on the rebuilt PC. When to you try to access a new rebuilt PC user account shared folder file from the other PC, I receive a read only and access denied message.
I have recently reformatted my C drive and have now got windows XP pro and most of programs reinstalled, but I have encountered a very distressing problem; I have an Excel file that contains all of my user names and passwords for web sites, programs, hosting services� everything.But since I have reformatted and restored my programs and data I can no longer open this file. Actually I encrypted and entire folder containing this file and several other QuickBooks files. So I guess I really need to be able to access the entire unencrypted folder.The problem seems to be that I did not register my computer with the same name when I reinstalled windows and now I�m locked out of this previously encrypted folder, and, consequently this vitally important file!Can somebody please help me find a way to open this file.
I've got an HP Pavilion 540n that is riddled with viruses. HP doesn't ship with recovery discs. I was able to use the recovery tool but now when the machine boots I get the Windows cannot access the specified device, path, or file error when trying to run anything. I can't boot to safe mode and have tried running fixmbr but it did not help. I tried running malwarebytes and combofix but I get the error above. I would wipe it and reload the OS but since HP doesn't ship with any CD's I don't have a disc to load.
I was having some problems with AVG firewall trial and finally just formatted and reinstalled my Windows XP. Since then, I am unable to access my Microsoft Office 2003 files. Whenever I try, I get a message telling me I don't have sufficient permissions to access these files. I am the only user and have full admin rights. I am also using a trial version of Office 2003 and was before formatting. Has anyone had any experience with this type of problem?
I have a friend running XP Home that needed to change what program a file type opened with. I had her go to Folder Options to change it but she only has the General and View tabs.Got the file type changed by right clicking and Open With but I'd like some ideas of how to get the missing tabs in Folder Options to show.
I have Office XP loaded on my PC, with added graphic filters, conversion filters and the 2007 compatibility pack loaded. Just yesterday, I tried to open a Word 2007 doc (.docx) which usually opens with the added compatibility filters. When the conversion list appeared, there were only 5 items listed, where there should have been around 20. Can't figure out where they went. I reloaded my filters and compatibility pack, but still can't open file and only get 5 items in conversion table. It almost seems as if the filters are being turned off. Any ideas? Is this a registry problem?
On my other Windows XP, I cannot get windows to start or something.I start up the computer and I get to the log on screen and I log on.However, then a window pops up saying "wininet.dll" could not be found and explorer.exe couldn't load. Then my desktop does not show up and the start menu doesn't, and it's just my background.
I just reorganized my office. Everything was fine before but now I can't boot up to my OS (Windows xp). I get the following message and that's by itself on a black screen: Windows couldn't start because the following file is missing or corrupt. <windows root<system32hal.dll. Please reinstall.I'm using a Dell Dimension 2400. I've tried finding the file on the resource disk and in the XP installation disk. I've been online through another computer and found the dll but can't seems to install in on my Dell. I've tested everything through my resource disk and everything tests fine.
