I have periodically had this problem: Program: C:Pogram FilesInternet Exploreriexplorer.exe, This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. Now I get it numerous times a day, and sometime IE-XP just shuts down for no reason. I apologize if this is a duplicate thread-got tired of searching.
View 6 RepliesRecently installed XP Pro. Since then a couple of older programs won't open and I can't load anything from the A drive without getting this er16 BIT WINDOWS SUBSYSTEM
C:WindowsSystem32Autoexe.nt The system file is not suitable for running MS-DOS and Microsft Window applications.Chose "Close" to teminate the applicationI found an earlier post that suggested going to
I just loaded a game on my pc and when i went to play it i got this error message
C:windowssystem32autoexec.nt. the system file is not suitable for running ms-dos and microsoft windows applications. choose "close" to terminate the application.
It has come up before and i can't figure it out
When i go to start -> run -> CMD it comes up with an error message ( TITLE ) : 16 bit MS-DOS Subsystem (Message) C:WINDOWSsystem32cmd.pif Invalid program file name, please check your pif file. Choose 'Close' to terminate the application When i go to that address i dont seem to find the folder system32 for some reason ,anyway to get it back easily
View 4 Replies View Relatedim attempting to install an application setup.exe file and recieve the following message: 16 bit windows subsytem c:windowssystem32autoexec.nt. the system file is not suitable for running ms-dos and microsoft windows applications. choose 'close' to terminate the application.
View 1 Replies View RelatedI open the cd drive (for one of the CDs), double click on setup.exe, and get the following annoying message:
"The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close' to terminate the application."
However, I also have the option of pressing ignore. When I do, it does the exact same thing as close So I really don't have a choice of opening the program. I really would like to use these CDs.
I have tried using the windows compatibilaty tool, but still the same thing happened. How should I get them to work? Also, old files I download from the internet also have this problem.
I am a tech in a service department for a company. We have used Remote Assistance successfully to assist our customers to fix problems from our desks We've found it somewhat problamatic trying to navigate our customers through the request assistance dialog so we can see what they see or take control so we can do something much faster than it would take for them to do by instruction.Is there a way to initiate Remote Assistance w/o the customer having to request or invite you?
View 1 Replies View RelatedThe message I cannot get rid of is:- the instruction at "0x019c52el" referenced memory at "0x01fbfa38". The memory could not be read.Click on OK to terminate the program. I keep on clicking OK and each time the message returns but each time with different reference Nos,I have run my AVG antivirus and spyware, but no joy.I have to drag the error off screen to lose it, but still there.
View 2 Replies View RelatedI'm trying to terminate a process in the task manager, but the process
keeps coming back. How can I stop it?pogisanpoloPosted from http://www.pcreview.co.uk/ newsgroup access
Close internet explorer on XP pro. The instruction at 0x020c3795 referenced memory at 0x01a5ad58 . This memory could not be read . click on OK to terminate the program. when i click ok nothing happens and problem occurs again next time.
View 12 Replies View RelatedI believe has to do with my Windows Installer. I've noticed that whenever I turn on my computer, this pop-up message from Windows Installer comes up on the boot up as Windows is done loading all of my programs. Also, this pop-up message comes up when I try to install certain programs, such as Blackberry Desktop Software, and then immediately terminates the install from there on out. The message says exactly as follows
View 8 Replies View RelatedMy husbands PC won't boot.the welcome (but without the welcome messege) and then the following error occurs"The Application failed to initialize properly (0x0000142) click OK to terminate program"We have no idea what this could be (the only recent changes made to the PC is a wireless connection, which was set up almost 2 weeks ago, so i am thinking that this isn't connected to the problem now?)....or how it has happened. My husband has tried to boot in safe mode and the welcome screen appears (again without welcome messege) and goes no further.
View 12 Replies View RelatedRunning MS XP/AOL/Norton System Works/Firewall. Past few weeks have been plagued by a window that opens, intermittantly, when reading email. Can't determine if it is a windows, Norton or virus/adware item, altho Norton, spybot, etc don't show any problems in that respect. The only thing I can't get rid of is a "first ave" request to download. Had that forever but seems to be a dormant item. Anyway. the window opens and reads : Just in time debugger.Please select a debugger. Possible debuggers... New instance of MS script editor. Then there is a checkbox to set current debugger as default. Below are two buttons asking if want to debug using selected debugger. Clicking "X" or no eight (8) times exits the window, usually not to return on that email but sometimes it does. Clicking yes shows some text (HTML?) or code or something with a few words "break" visable.
View 5 Replies View RelatedPurchased a used laptop running Windows 2000 pro. When I boot up a window appears with sellers name requesting the password. I have the password, but I would like to eliminate this step. What specific steps will acomplish this task and replace the sellors name with my name as administrator ?
View 10 Replies View RelatedThis pc has been with me for a few months, no poblems at all. One day it just Bsods. Thinking it was just some random WinXP error, I restarted it and never thought of it again, until it happened AGAIN. 3rd times the charm, right? WRONG. After a few more I couldn't do anything basically. Boot > Bsod. So after a few Google searches and self troubleshooting later I got it almost sorted out. Also if I take this HDD to another computer it works fine. So, the problem seems to be my IDE controller. (atapi.sys) So I am requesting a place where I can find a clean atapi.sys and go replace it with the windows system recovery console. Also I am curently running a full system check for viruses on that working computer.Stuff that I have tried while trying to fix the bsod: Changing IDE cables, Resetting the bios/cmos reset, plugging it into the secondary IDE port, playing around with jumpers, replacing RAM sticks.
View 9 Replies View RelatedA friend has a 30 gig XP Pro laptop with 17% free...When he runs defrag most of it is way fragmented...He runs through the defrag fine and after it completes it tells him he needs to defrag again...With no changes in the fragments...His computer is clean of spyware/adware/virus/trojans/etc
View 6 Replies View RelatedWhenever I try to enter Standby mode...either by clicking the menu button or closing my laptop lid... my PC freezes
The monitor turns off but that's as far as it gets...I then have to tuen it off manually and reboot everything.
Usually when this happens, the fan continues to run at high speed until I turn power off
I was trying to back-up a file to CD using the CD Writer on my computer when I kept getting the message: The request could not be performed because of an I/O device error. Does anyone know what this means and how I can correct this situation?
View 14 Replies View RelatedI have a peculiar problem. I can dial-up the internet after a boot-up but should I let my connection drop or sign out and want to reconnect,I get an "ERROR 50: request not supported.". Multiple attempts will not reconnect me. I bought a new modem, intalled it and still get the same message on attempting my second connection.I can always get back on the net but re-booting each and every time is a pain in the It appears I'm not the first to come to this group with the same complaint but I've not found a solution to the problem in this newsgroup.
View 1 Replies View RelatedI have an HP Laser Jet 1012 that is assigned to port DOT4_001. I am trying to delete the port but each time I try, I get the following error message: "Selected port cannot be deleted.The request is not supported"I am running WinXP and have full administrative rights.I have also removed the printer and reinstalled it with the same results.
View 6 Replies View Relatedi accidentally deleted my windows component with paint, volume control etc on it. so i downloaded the service pack to reinstall, but when i went to do this i got a message saying 'before proceeding we recommend you back up your system.
View 8 Replies View RelatedWhen i Go To command prompt i type ping 192.168.0.1 i get "request time" out And When i Type Ping yahoo.com i Get "Request Time Out" I Have Internet Explorer 8 its Working Good i Can Go To Any Websit But i Cant Get Any Patch For Any Game i Play I Try The Modem With Other Pc its Work Fine
View 4 Replies View RelatedEvery time I boot up I get the following error: Found new hardware wizard Cannot install this hardware There was a problem installing this hardware Logical disk manager An error occurred during the installation of the device The class installer has denied the request to install or upgrade this device
View 9 Replies View Relatedi want to know how to rectify the above shown orror notification in my windows xp dextop computer
View 1 Replies View RelatedI've searched the numbers but came up with nothing.The runtime 216 error worried me since it usually is a virus so I ran two scans(antivir-which I normally use and symatec) both show the pc is clean.The boxes only occur when the last window is closed. The first box is an explorer application error 0x018638ae reference memory 0x0197cca4 memory could not be read.After that box is closed the runtime error 216 at 018638AE pops up.
I just got a notice from Win. Download Center, that I need: "J2SE Runtime Environment 5.0 Update 2". In AddRemove programs I already have "J2SE Runtime Environment 5.0 Update 1". Do I NEED both? They are both HUGE, 117Mb EACH.
View 4 Replies View RelatedBeen having a problem with java using 100% cpu so uninstalled java 1.6.0_05 and downloaded the offline installer for JRE 1.6.0_06. Also got rid of java entries in the registry,
View 6 Replies View RelatedI had a visual runtime error when i start the game named "Overlord II" and i dont kow why this is was the error say:For information ohn how your program can cause assertion gsilture, see the Visual C++ documentation on asserts (press retry to debug the application - Jit must be enabled)
View 1 Replies View RelatedWhenever I try to open a folder within a folder through Windows explorer, I get this message: Microsoft Visual C++ Runtime Library Runtime Error! Program C:WINDOWSexplorer.exe abnormal program termination However, when I go into the 'folder' options and select 'view each folder in a separate window', it works fine (But obviously it's irritating that so many folders get opened!) I have tried to use a number of programs such as HijackThis!, lspFix, Regedit, Regcure, Runtifix, etc. but to no avail.
View 7 Replies View RelatedMy computer keeps coming up with a message saying Runtime Error 217 and iexplore.exe application error. It says : The instruction at 0x300a2074 referenced memory at 0x065a8e24.The memory could not be read read.Click on OK to terminate the program.My Computer is running Windows XP Media Center.
View 9 Replies View Related,when I log on I get the following messageReal Time Run-time error '429:'Active X componantcan't create object ok and Realtime appears in the taskbar and clears when you click ok