Maintenance :: InstallShield Wizard Hangs At 0% And Never Finishes
Apr 20, 2013
In december I purchased anew ASUS laptop. It came with Windows 8 installed. Everything was fine for about a month. The new interface was annoying but w/e, change happens and i adjusted. But the OS performance has quickly tanked.
My first problems was a lost in framerate playing. Initially I could run it at high setting and get 60fps but now i run it on low setting and I'm lucky to get 30fps.
Then I started to have a problem whenever I shutdown the system. Upon reboot it would freeze for 5-10 minutes once I was at my desktop. This problem persists but I just never turn off my comp or let it sleep to get around it.
In my attempts to fix these problems I tried to install updates. This requires the system to enter a restart which results in the computer freezing and never installing updates/restarting.
My computer wont recognize USB drives unless they are plugged in with comp shut off and then booting (after freeze for 10 min).
I downloaded a copy of Win 7 from microsoft website and loaded it on a USB boot drive so I could use my old cd key and run a stable OS finally. However the formatting of the HDD said that win7 could not be installed on that format type. I tried to use system utilites to repartition and reformat one to install on, but of course the partition program hangs when it attempts to populate the partition list.
So I decided I would restore the system using the backup partition. Again, when I tried using the restore utility my computer froze until I did a hard reboot.
My latest problem that started today is anything I try to install using the "InstallShield wizard" hangs at 0% and never finishes.
Here is a link to the laptop I purchased: ASUS S56CA-WH31 15.6" Ultrabook - Newegg.com
When I turn the power on, my desktop PC (a Hewlett-Packard) goes into a BIOS startup routine that says "Preparing Automatic Repair" and then "Diagnosing Your PC" which has to finish before it will load Windows or any OS. I've seen it before, and usually it just takes a few seconds. But now it's stopping at the "Diagnosing" message and won't go any further. I turn it off and on, and it does the same thing again. I can get into the BIOS menus and choose other options like booting from another drive, recovery options, etc. but no matter what I choose it starts the BIOS over again and gets hung up on the "Diagnosing" step, so I can't boot ANYTHING.
Any way to bypass or break out of this BIOS startup loop so I can get to Windows?
Every now and then when I shut down my computer it will show "Restarting" for about 1-5 seconds (My pc is fast) and the display will shut off. But the computer will still be running, the HDD and all are running. I have to do a hard shutdown by holding the power button.
I have found this in the event logger:
"The system firmware has changed the processor's memory type range registers (MTRRs) across a sleep state transition (S5). This can result in reduced resume performance."
Source: Kernel-Power
I heard it having something to do with "fast startup" or "Quick Boot" I am unsure.
I'm not sure what's exactly the problem but sometimes Windows 8.1 hangs at the Windows logo at boot with Fast Startup enabled on a mSATA SSD with my Lenovo Y570 laptop.
My laptop does not support Secure Boot/GPT or UEFI, so I'm really unsure if that's the problem.
Once I disable Fast Startup the boot process never hangs ever but it makes my bootup time slightly slower.
I just got an Asus R510DP-FH11 laptop (Newegg.com - ASUS R510DP-FH11 AMD A-Series A10-5750M (2.50GHz) 8GB Memory 750GB HDD 15.6" Notebook Windows 8 (64 bit)) and, after installing a bunch of updates, got Windows 8.1.
When I bring up the start menu, scroll down to the apps menu, and move the mouse at all, it instantly brings me to the desktop where "Asus Installation Wizard" will launch and then immediately tell me that I don't have the supported hardware (even though the Asus Live Update program tells me everything is fine and up to date). I can close it, but it just happens again and again when I visit the apps menu, and ONLY when I visit the apps menu. It doesn't happen on startup or any other time.
how to stop it from launching. I cannot do anything in the apps menu because of this.
My laptop has been updating since 7am and it's now 3pm. It's still on ONE of TWENTY ONE updates. It says do not unplug, which I did not but I did shut it down because this is ridiculous. This is also the 2nd time it has happened. The first time I shut down (A couple of weeks ago) and when I turned it back on it took me to my desktop and everything was fine. But now, it's not taking me to my desktop. The instant I turn it back on it says Installing ONE of TWENTY ONE. How can I get this to stop? I have important documents on my laptop and I take online classes. I don't want my computer to install ANY updates.
Partition wizard - seems no way to create a USB bootable media -- if your PC doesn't have a physical DVD drive even the PAID PRO version doesn't show the create bootable media option. Machine doesn't have bootable CD.
Gone back to the FREE GPARTED program -- although it can take a lot longer to run when re-sizing / moving partitions.
(Another method -- a bit extreme though is to install Partition wizard on a Windows to Go system !!!)
The Partition wizard website is totally confusing too it shows a USB version but how to obtain it is unclear and the documentation is not good either.
My PC specs: Asus P8Z77-V with a SATA2 WD Caviar Black 500GB. The HDD has four partitions, and I've had Windows 7 32 bit installed on C:/ for three years. Windows 8 was just installed four months ago.
Before this, I had my Windows 8 and BIOS ahci-enabled C:/Windows 7 <> D:/Stuffs <> E:/Windows 8 <> F:/Stuffs
Yesterday, I needed some space on my F:, so I started Partition Wizard (I used this program a lot before with no problems) and cut 9gb from C, after that queue it to extend F: that much space.
Because C: is located first, but F: is located last, PW created 4 queue, which is cut -> move D: -> move E: -> extend F. The two first actions were performed fine, however when I restart as PW promoted, I was stuck at the BIOS, unable to access BIOS, with the red led lit on the P8z77-v, which means there was a problem with a boot device. If I unplug the HDD, the system goes into BIOS just fine, but obviously can't boot anymore.
There is a lot of important data on that disk which I can't afford to lose. My problem sounds almost like the same as this one: [URL] ....., however when he changes his BIOS to IDE mode, his HDD booted into Windows 7. However, mine doesn't. I've disabled Secure Boot, but that doesn't work either. It just stucks at the BIOS splash screen.
Currently I am considering to burn a PW CD and hotswap the HDD in order to fix the MBR and stuffs.
It looks like this PC can't run Windows 8.1. This might be because the Users or Program Files folder is being redirected to another partition."
By using the Customize feature of Windows Easy Transfer Wizard, I created a MIG transfer file, without selecting the user folders (such as Documents, Pictures or Video).
If the MIG file is copied to the C: drive, will the User Profile be created on the C: drive, when Easy Transfer is run?
I am guessing that the default User Folders will be created on the C drive, and then the locations can be changed to match the present physical location on my other partitions.
I run the Cleartype text tuner wizard and chose a thicker text setting but it only works on IE, the rest of programs are unaffected, is there a way to make that wizard work for ALL programs
Suddenly, the Acronis program I used to always use for partition copy, won't detect my USB mouse and KB. So, I'm having to do it with Partition Wizard 7. I've never used that to move a system partition, are there any issues doing it that way? The only other program I used to use for this kind of Op is paragon partition manager, which the version I have is not compatible with 8.
I don't like doing it this way, it's very slow compared to using the Acronis program, which seems to fly fast.
I have a Windows 8 machine with Windows 8.1 upgrade.
On my operations such as restarting and shutting down it hangs and does nothing (I understand this a common problem but I have tried 3 solutions I found on the internet and none of them worked.) I still have to turn off my computor by holding the power button......
It isn't just shutting down however. Often when I try to open a program I have downloaded from the internet (the latest example being a driver scanner) nothing happens.
To try and fix these issues, I attempted to refresh Windows 8. Again it did nothing. After clicking the Get Started button it just hung on Preparing. I only left it for about 20 minutes, I thought something would have happened by then. The same is true for reinstalling Windows.
Sometimes Windows 8 just hangs after I look around and change some of the DVD related settings in VirtualBox. My host system is ubuntu and the guest is Windows 8.
When it hangs it is usually showing the Windows 7 desktop because I am always in that mode. I cursor to the lower left to try to the the mini-tiles but no matter what I do with the cursor, the mini-tiles do not appear. In fact, nothing works. I cannot launch any desktop applications.
In the past I solved this by simply having VirtualBox send the shutdown power-off signal. Windows is ignoring the shutdown signal. Is there a Windows-centric way to fix this problem so that I can do a Windows-centric shutdown in the normal fashion or otherwise resolve or prevent this problem?
The short story: I've got two Windows 8's on a machine: one OEM and one retail Pro which I just installed. The light-blue "OS Selector" screen which it boots to will hang after about 10 seconds. Within those 10 seconds, I can click to boot the OEM Windows 8, and it will boot fine. If I select the new retail Pro, it'll start booting that and then hang.
The longer story: I've got a Samsung Chronos7 laptop which has an OEM Windows 8 installed on it. For reasons which I won't go into, I got it into a strange state such that I can't use it for development work. So, I decided to install a fresh Windows 8 Pro retail next to the existing OEM version.
The install went fine. I could boot into the new Windows 8, and I started installing my development tools, mail client, Dropbox, etc. etc... and installed about Windows 48 updates (and I noticed that a few items in Device Manager which had, when I first looked, were unidentified, had disappeared from "Unidentified Hardware" and, presumably, were in their proper categories and without yellow problem flags).
Then, when I rebooted, I got the light-blue OS selector screen where I got to choose between the two Windows 8's (and then I heard an interesting "thump" from the speakers)... and the 30-second timer started counting down... until it got to 20 seconds, and then the machine just locked up. No mouse cursor movement, no hard-drive activity... nothing. Every time I boot it, it does that same thing: Thump from the speakers, clock ticks down to about 20 seconds, and then hangs.
Now, within those 10 seconds, I can click on either of the Windows 8 icons and get them booting. If I click on the OEM one, it'll launch fine (but it's still unusable for my development work, mind you). If I click on the new retail one, then it will hang at the little circling dots. If I start launching the new Windows 8 before the "speaker thump", I'll still hear it while Windows 8 is launching (before it hangs).
So... I'm figuring that something about the stock Windows 8 drivers is different from the OEM-packaged drivers, or something about the Windows updates on the new version has altered the boot loader, of all things. But now I'm kinda stuck, because I can't figure out how to boot into any sort of "Safe Mode" in the new Windows 8 install (I tried pressing F8 at just about every step of the boot process), so I'm not sure how I'm supposed to disable any hardware or roll back some drivers or restore to a previous restore point.
(Hanging at the light-blue OS selector) before? Is there a way for me to, perhaps, replace the Windows 8 boot files in the EFI System Partition with the "working" ones from the OEM install?At what point of the boot process am I supposed to be able to switch to Safe Mode?Is there a way to roll back driver or restore to a restore point if I have a Windows 8 Recovery CD or USB?
The first one is the way that the wifi stops responding. It doesn't update in the notification area when it happens, to limited connectivity or any sort of warning like that. I can only tell when background downloads I have going are interrupted, but it seems really inconsistent why and when it happens. I've been unable to pinpoint and reduce the number of potential causes, not for a lack of trying. I disconnect from the network, and am unable to reconnect without first disabling and re-enabling the wifi adapter. This, however, presents the problem of the wifi adapter not re-enabling, and before that, the Network Sharing Center window in which I do it, will not update to the disabled state without a window refresh.
This leads to the other issue, is that when and only when this wifi issue happens, on restart, it hangs while showing the dark gray screen that says "Restarting..." with the spinning circle. The spinning of the circle happens continually, but will not advance further, even being left for close to an hour.
Every other wireless device (mobile phone, laptop, game consoles, etc) continue to function, so the network itself doesn't seem to be having an issue.
A thought I had, though I don't know how much water it may hold, is that something could be acting funny with a power saving/hibernate function, as I said, I've just been downloading when I notice it happening. I'll start a download, let it do it's business, continue on with my business elsewhere, and almost to no fail, a few hours later, upon returning and checking the current status of said downloads, I have to restart. I don't have it set to go to sleep/hibernate, but I'm not sure if there's other power save options in Windows 8, as this is the first desktop I've owned in recent memory and was surprised as is to see power options on it at all. It also seems like one of the network services could be acting strangely, with it not updating the notification area or adapter windows without manually forcing it.
I've scanned with Windows Defender, Malwarebytes and ran CCleaner, and nothing out of the ordinary was presented in the scan results.
have been having crashes with my newly built PC at various stages in setting the computer up. if my technical language is lacking.
My System CPU: AMD FX 6300 GPU: Gigabyte ATI HD7870 OC Ed Mobo: ASRock 970-PRO3.R2 RAM: G SKill 8G(2x4G) DDR3 1600Mhz PC12800(GS-F3-1600C9D-8GAO) SSD: Samsung 120GB SSD 840 EVO HDD: Seagate 1TB Barracuda PSU: Antec NEO 520C ECO 80Plus Bronze
Windows 8.1 First noticed issues when on the initial installation of windows 8.1 there was a hang while it was showing the blue windows logo. Multiple attempts led to me reaching various stages of setting up the computer, i.e. installing all latest drivers, BIOS and firmware for the hardware and installing a number (but never all) of the available windows updates. Through out the process I experienced frequent BSOD (generally within second or minutes of logging into the user) that did not appear to be initiated by anything in particular. Hangs were frequent when attempting windows updates (happened during 'checking for updates', 'downloading updates' and 'installing updates' on shutdown). Examples of the types of BSOD experienced.
Attempts at fixing the issue included fresh windows 8.1 installs (where crashes/hangs during installation off disc were experienced), resitting RAM, installing windows on HDD by itself (as opposed to SSD by itself), running startup repair tools (various times did not detect a problem or could not fix). Problems continued in various frequencies at various stages no matter the attempted fixes.
Windows 7 Suspecting compatibility issues between the hardware drivers and windows 8.1, a fresh install of Windows 7 was attempted. This has been more stable on installing drivers but on attempting windows updates the same update problems were experienced in the forms of hangs rather than BSOD, the only BSOD error that has come up on occasion is 'a clock interrupt was not received on a secondary processor within the allocated time interval'. This BSOD has interrupted the installation (on shutdown) of windows updates on the rare occasion they manage to download in their entirety. More frequent crashes was also experienced after updating to the latest GPU driver. Installing the latest mobo AMD All in 1 driver from ASRock (contains AMD Catalyst Install Manager, AMD SATA AHCI Driver, AMD USB Fillter Driver) causes windows to freeze on restart at the Starting Windows page with windows logo but seems to function OK after restart.
Troubleshooting for windows updates including running check disk and windows update diagnostic tool which did not appear to show or fix issues.
Startup repair was also attempted and provided the following Root cause found: Unknown Bugcheck: Bugcheck 101. Parameters = 0x21, 0x0, 0xfffff88002f65180, 0x2. Not sure if that means anything.
At the moment the PC has windows 7 installed onto the SSD, latest lan/usb/audio drivers and microsoft security essential (antivirus) installed with only 2 windows updates installed: Security Update for Microsoft Windows (KB2621440) Update for Microsoft Windows (KB976902)
This appears to be stable, but attempts at windows update and installing the mobo driver causes the problems mentioned above. I have been using the current setup as a restore point.
The below minidump is within the context of the 'stable' config + latest mobo AMD All in 1 driver and the BSOD occurred while installing windows updates before shutdown.
I upgraded from Windows 7 (64-Bit) to 8 (64-Bit). When I had 7 it took about 10 seconds to boot, but now it can take anywhere from 2-5 mins, also it doesn't shutdown (I have to hold down the power button) and it never sleeps (the screen goes off but the laptop remains running).
Brand new Dell XPS 13 Ultrabook with Windows 8. 256 SSD, 8 gigs of memory, i5-3317, non touch screen. Working fine for 2 months and now will not boot after Dell logo. Have been on tech support three times still not solved. They sent a USB recovery drive and does not boot. They sent an optical drive and the windows recovery disc; still not working! Not a novice at this but fully stumped. Cannot get to a C prompt, cannot get into Safe mode. Am able to get into BIOS but is limited in what can be done there. Diagnostics says everything is fine. Am ready to go back to Windows 7 until they work the bugs out.
I use 8 Pro Build 9200. When I boot, everything is normal. Then, after a while, usually a dozen minutes, whenever I open a folder in Explorer, no file icons will be shown, whatever the file type : I only get a blank generic rectangle instead of the proprer icon.
When this happens, I can be totally sure that any right-clicking on a file or a folder will result in the windows hanging indefinately. The only way out of this is to end the task through Task Manager.
The layout and folder options become unavailable as well.
1) Firefox always hangs (Not Responding) when I try to close it.
2) Sometimes I am unable to kill the process from Task Manager or Process Explorer (access denied).
3) Sometimes it leaves behind a zombie process that can't be killed. I cannot launch a new Firefox process (it launches but stays hidden). The only solution is to reboot my computer.
4) If I leave Firefox open, after a while it becomes nonresponsive. I usually need to reboot the computer for reason 3 above.
I have seen similar behavior from Internet Explorer and iTunes, but not all the time. I am focusing on Firefox now because the problem is very repeatable.
I have scoured the internet looking for a solution but have come up empty. The Mozilla web site suggests I disable all add-ons, which I have done. This does not fix the problem, so it is something else. I have Norton Antivirus and have scanned my system for problems but it is clean (tried Malwarebytes too, but looks good). I have tried disabling my antivirus software (everything but the firewall) and still get the same problem. I have methodically gone through and made sure all of my drivers are up to date.
My issue is that I have a HP Pavilion G6 2399-sa and it is currently running the HP OEM version of windows 8, I have previously updated to windows 8.1...twice in fact and every time that I have updated to windows 8.1 I get random freezing issues. These freezing issues occur at random times there doesn't really seem to be some pattern to it.
I know that I have to update to windows 8.1 as there are apps which refuse to be installed unless I update ... So what to do because I need to update again so I can use my apps...I do recall reading something about Dynamic ticking I think? It was some command in cmd prompt like bcdedit /set disabledynamicticking yes I believe.
About couple hours ago I decided to install updates on my Windows 8 desktop. I had about 12 or so. Can't remember which ones now. My update settings are to notify me of the updates but not to install them. So I manually clicked, yes, install. Then after a little while the updates window showed up in red telling me that some updates did not install. So I decided to reboot the desktop to clear it up...
The desktop now hangs up on this very screen: (New windows logo and a spinning thing)
That spinning thing keeps spinning, no matter how long I let it run like this. The HDD light first blinks but then about half a minute in, it stops doing so. I believe that the fan inside spins audibly louder too.
OK, so if I reboot by holding down the power button for a few seconds, it begins rebooting again. For the second time it showed something like "Automatic repair" or something. (I need to say that my solid state drives have Bit locker set up on them.) So after entering the bit locker keys I was presented with an option to do repairs. Since I didn't feel like I needed to do system restore I declined and chose to keep booting into Windows.... again nothing.
So I repeated the process above, but this time it did not offer me to do system restore and instead, it showed something in the tune of "Repair windows". So I chose it, and it then showed this window:
Now I tried it two times already, and no matter what I choose, it hangs up just like I showed on the screenshot above -- with that white border around whatever I choose... How do I get my desktop back?
I'm running 8.1 on a newly purchased Acer TC-603. It's a dedicated machine for a networked video recording system. It runs Blue Iris, and records from about 25 IP cameras, storing the images on an external 4TB USB3.0 HDD.
Everything works as it should, until the system reboots or powers up. At that point, I get past the post screen, where it detects two SATA drives (the internal SSD and the internal DVD), but then hangs. It will not continue. I have to turn off the PC (or ctrl-alt-del) and pull the USB cable from the external drive before it will load into Windows 8.
I've tried various solutions (i.e. disable USB legacy support in BIOS), but nothing seems to be working.
I'm quite familiar with changing the boot order on all of my other PCs (W7). But on this machine, the options are limited to "Windows Boot Manager", removable media, LAN. But how does one tell the WBM to only look at the internal SATA connected drive, and ignore the USB drive?
I've never seen a BIOS that had Windows Boot Manager listed.
I've turned off secure boot. I've disabled legacy USB. I've disabled the Launch CMS feature (with then allowed the PC to detect USB thumbdrives on the f12 boot menu). But no matter what I do, I HAVE to remove the external HDD for the system to boot.
Needless to say, for a security-sensitive application, having a PC that relies on the HDD for storing video removed is not an option.
upgrading my old PC to Windows 8, because I absolutely cannot afford to buy new, and I don't want to get caught out when Microsoft pull the plug on XP.
I have a copy of Windows 8 64 bit, which I want to try to get installed. My system has an Intel Core2 Quad Q6600 which (according to the Intel website) supports Windows 8. However when I try to install Windows 8, I can boot from the CD but it doesn't go any further than the splash screen with the blue Windows 8 logo. I don't get any other information as to what the problem is.
What I have tried:
1. I checked that "Execute Disable" was turned on in my BIOS. 2. I unplugged all USB devices except Keyboard and Mouse 3. I tried booting from a USB DVD drive.
None of the above worked. I can't do an upgrade install from within Windows XP because it is 32 bit.
By the way I have included the log from the SysInfo utility in case it is useful:
System Info Utility version 1.0.0.2 OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, x86 Family 6 Model 15 Stepping 11 Processor Count: 4 RAM: 3326 Mb Graphics Card: AMD Radeon HD 6670, 1024 Mb Hard Drives: C: Total - 305234 MB, Free - 266087 MB; D: Total - 476937 MB, Free - 340152 MB; Motherboard: Dell Inc., 0FM586 Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled
I use 8 Pro Build 9200. When I boot, everything is normal. Then, after a while, usually a dozen minutes, whenever I open a folder in Explorer, no file icons will be shown, whatever the file type : I only get a blank generic rectangle instead of the proprer icon.
When this happens, I can be totally sure that any right-clicking on a file or a folder will result in the windows hanging indefinately. The only way out of this is to end the task through Task Manager.
The layout and folder options become unavailable as well.
My windows 8 computer is extremely slow and hangs often. It is nearly impossible to run simple programs such as file explorer or task manager. I almost always have to hard power off.
I have Windows 8.1 and IE11 always hangs after about 1 hour, all tabs do not respond and the top of the page says Internet Explorer (not Responding).
I can leave it for a couple of hours and nothing happens, when I right click on the IE on the taskbar and select close window an error message comes up that IE is not responding and if I click "close" nothing happens, if I click search for solution and restart, a new IE restarts but the original stays and remains "not responding".
Even Task Manager cannot close it down I have to reboot to get rid of it.
I believe I have the attest version of IE11 (11.01)
Since a few weeks for some reason I cannot access some programs (like MS Word), it just says that "the operating system is not presently configured to run this application". It doesn't show up as a registry item either same as some other programs.
Now my problem is that I cannot install a new version, nor openoffice, or anything else for that matter that uses windows installer.
I've checked if the service and subservice was running and they were, I've tried SFC /scannow and Dism /Online /Cleanup-Image /RestoreHealth but they both didn't fix the problem ( did fix some corruptions though).
What happens with the installer is basically it doesn't do anything. It just sits at initializing forever and doesn't install anything at all. Currently cannot install any programs but don't want to reinstall windows since I have a lot of programs and settings I don't want to lose.
