Getting An Error Message At System Startup?
Jun 7, 2012i am getting an error message at system startup ,there was a problem starting msipkb32.dll.
View 2 Repliesi am getting an error message at system startup ,there was a problem starting msipkb32.dll.
View 2 RepliesWhen i startup my new-ish laptop (Dell 64bit i7processor running windows 7) i keep getting a black screen with a message in white letters reading:-
"Checking file system on C: The type of the file system is NTFS. Volume label is OS. One of your disks needs to be checked for consistency. You may cancel the disk check, but it is strongly recommended that you continue. To skip disk checking, press any key within 10 seconds."
When i didn't press any key to escape the message it remained static like that for over an hour. Can anyone explain what is happening and how can i maintain a healthy disk in the first place to avoid this message?
I recently just starting having this problem in which it states that a specified modual cannot be found when i enter onto desptop?. I have no clue where this came from and it is very annoying. I have attached an image at the bottom of what specifically it states.
View 2 Replies View RelatedWhenever I boot up my computer, I get a message that says
"There was a problem starting 3DLCXtime.dll The specified module could not be found"
The box has an 'OK' button and an x in the top right, I just hit 'OK' and the box goes away and doesn't bug me, but I wish to have it stop, since it kinda worries me that it may be a larger problem that may slowly get bigger.
Dell Dimension 8400 o/s W7 Ultimate, running fine for months, has suddenlt started to have an error window pop up on the Desk Top during start up.
View 14 Replies View RelatedEverytime I login a popup appears: Quote: There was a problemstarting:C:UsersUserAppDataRoamingMFWMAAECE.dllAccess is denied. I've justuninstalled a program which it might be related to but I haven't had any problems anywhereI've searched for the file in the folder and in start menu and its not coming up with anything.
View 4 Replies View RelatedI am not computer savvy when it comes to these sorts of things. The heading states it all and am wanting a bit more of an insight at any problems that may be occurring etc.. Also, as of late I have noticed that my DVD player refuses at times to read a DVD movie or game title, and only after a few open / closes it seems to work. - x86 (32-bit) or x64 ? Windows 7 Home Premium 64 bit - the original installed OS on the system? As Above - an OEM or full retail version? Retail Version
View 3 Replies View Relatedi am running windows 7 home premium 64 bit on my core i3 lennovo laptop
Problem is that i have been running a 2nd monitor and about a month ago the laptop screen went crazy and stopped working but the monitor kept working so i just went along with that. All has been fine but 2 days ago a tried to log in and the computer froze so i manually restarted it to find the startup repair come up, it did its thing, restarted a few times over a day and then it said that the problem could not be repaired, i tried it again and the same thing happened.I saw the infinite loop tutorial so i tried it and got to the final stages and it said that the action could bot be performed because of an i/o error.I searched around and saw that people have used chkdisk And sfc scannow. I tried these but kep geting the same messge about the i/o error.
I unistalled malwarebytes from my pc and now I am getting the following "run-time-error 53, file not found mbam" How do I get rid of that plz?
View 7 Replies View RelatedI can not get past the System Recovery Error Message screen. I have tried F8 and then safe mode, restore to an earlier point, repair and all to no avail????
View 8 Replies View RelatedOn loading Windows, I've been receiving an odd error message in reference to a non-existent "F:System Reserved" drive stating "you must format the disk in drive F: before you can use it." This will occur multiple times per minute at first before eventually going away. Each time the error occurs, this F: drive will appear for a split second before immediately disappearing once more. While this hasn't seemed to impact the performance of the computer in any way, the repeated errors essentially make the computer unusable for the first 2-3 minutes after loading.
View 1 Replies View RelatedI have just recently built my new system build. Everything started out fine.I configured my BIOS settings and booting sequence before I had an OS to start it up. Today, I got Windows 7 Home Premium 64bit OEM and put it in the drive to start up, then an error message saying BOOTMGR is missing.
View 4 Replies View RelatedToday I started getting a strange error message pop up that stated "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator." It seems to pop up at random. First couple times, I ignored it. When it persisted, I googled it, only to find most people with this error are having issues with links in outlook. I do not use outlook or IE, and wasn't doing anything browser related during any of the errors, so, lazily, I ignored it again. Finally, when one of these errors kicked me out of my Portal game, I decided I had to do something about it. I decided to just system restore before I went through any huge hassle before I tried figuring anything major out.
System restore went swimmingly, didn't seem to have any issues. But.. My keyboard and mouse, both wireless and usb, weren't working upon reboot. Okay. Different port. Nope. All of them are dead. All. Even the motherboard ones in the back. NO usb device I plug in works, or even registers. To make it weirder, I see that my wireless isn't connecting (the internet is fine) and my sound is muted. Sound was on when I started system restore. It's like all input into my machine is no longer accepted. I know the CD drive works, because inserting a CD even brought up the autoplay window, even though I can't actually input anything.
I just recently built a new computer and i decided to see how much more speed i could get out of my processor with amd overdrive's autoclock feature. it brought it from 3.1 GHZ to 3.2, and it wasn't stable so i just reset the settings back to default. I also tried overclocking my graphics card with MSI afterburner and it wasn't stable or worth the tiny bit of extra fps so i clicked reset to default. now whenever i shutdown my pc and turn it back on it says "overclocking failed" and then it takes me to my bios screen where it says that settings have been changed in the advanced section in my bios, so i go there and click the reset to default button.when i boot into windows i get weird lines and purple squares and then the screen flashes and it says that my display drivers have stopped working. so my computer is unusable and i have spent alot of money building it and i don't know what to do!
View 5 Replies View Relatedi downloaded a trial progran and deleted it, then i had problems with windows, booted eventually after 6 minutes but no internet and i get this error message, windows cannot connect to systen event services,log in as admin and check what services fail to load, but it wont even do that. my system restore has also been disabled etc. i tried a repair but no joy, so i tried an upgrade but, because the installed version on the PC is newer than the CD version it wont do the upgrade. i am trying to avoid a clean install. how can i get past the "you have a newer version of windows" and do the upgrade,
View 1 Replies View RelatedMy computer started to freeze up a lot and now I receive the following error message on startup: "Reboot and Select proper Boot device. Insert Boot Media in selected Boot device and press any key."It is a Windows XP OS.
View 4 Replies View RelatedEach time I start my system, I get an error in the Event Viewer:
The following boot-start or system-start driver(s) failed to load: VDiskBus
i restarted my compure about an hour ago for it to complete a windows update, on the logout screen and showed: installing updates, it jumped from 10% to 20 and thirty and the skipped to shutting down.when starting back up again i got a BSOD saying:STOP: c000021a {fatal system error} The Verification of a knownDLL failed. system process terminated unexpectedly the system has been shut down.in the startup repair i get:startup repair cannot repair this computer automaitcally.
Problem Signature:
Problem event name : StartupRepairOffline
Problem signature01 : 6.1.7600.16385
Problem signature02 : 6.1.7600.16385
Problem signature03 : unkowen
[code]....
for some reason i cant find how to enter safe mode on this mobo (its a new computer)ive hit F8 and it just takes me to a boot priority. F10 11 12 arnt for safe mode either.
i have sony viao laptop, when i start my pc it shows the following error " operating system not found "when i opened bios menu, it doesnt detectes the hard drive n says " no drive ".hv my hard disk crashed ?
View 1 Replies View RelatedI've been having an issue with a system error that has given me problems over the past 3 months. As you can see in the attachment, this is what is wee when I either first start up my computer, or I try to print something. Various small differences will show up in the error, such as the weird characters will be in different order etc. When I try first start up my machine and this error pops up, I only have to click okay once for the message to disappear. However, when I try to print, I must click "OK" at least 20 times before the message stops popping up. Its getting annoying and I'm afraid that it will eventually get worse. I've always troubleshooted my own problems, however I'm not even sure where to start as I cant understand the characters or what program could be causing this.
View 4 Replies View RelatedEver since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies View RelatedEvery time at startup I get this notepad message. What is it? How do I turn it off?
It's not a big problem but it's very annoying...
I'm using Windows 7 RC 32 bit.
i used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer , the start-up at least took half an hour at that time and the service pack 1 installation showed "not successful " i tried to again to update the service pack1 which showed 73.6mb - 892.6mb so i updated it again and again the same thing happened.
View 7 Replies View RelatedAll of a sudden, my pc now has this small message box load when it gets to the desktop which says "The path is not of a legal form."I have searched everywhere on the net to find something that might be able to help diagnose what is causing this but to no avail.
View 1 Replies View RelatedOn Startup my desktop displays (OUT OF RANGE). I ran diagnostic and error code 2000 0146 is displayed. Windows will not start up.
View 6 Replies View RelatedI have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
View 1 Replies View RelatedLiving is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies View RelatedI have Windows 7, Live Mail. Mail with attachments come in with no problems, like photo attachments, but my mail will not go out with photos attached. They are not huge files. I get an error message "error/tasks" but then that screen freezes.
View 11 Replies View RelatedBefore my computer was working fine when i am connecting to the internet using a portable usb internet huawei. Then one morning when i tried to connect i got this "Error: 720".
View 1 Replies View RelatedHow to Automatically Create A System Restore Point at Startup ?
View 0 Replies View Relatedmy system hangs without any message i have to disconnect the power to shutdown
View 2 Replies View Related