Windows 7 Installed Asus Wi-Fi Adapter, However It Doesn't Work
May 19, 2012
I've installed ASUS Wi-Fi USB adapter (model USB-N13) for LAN. There is Windows 7 Home Premium x64. Through control panel I see that adapter works normally and the drivers are the latest. However my PC doesn't see the adapter - the ASUS utility notices me "ASUS Wireless LAN card is taken apart from your desktop PC".I have the same Wi-Fi adapter at another my PC with Windows 7 Home Basic, and everything works nice. Of course I changed these adapters between my computers. Conclusion is both adapters are working good. The same models, the same drivers. Actually I don't understand where is the mistake?
I have a laptop in which I am running windows 7 pro x64. But as I had a problem with the weak signal I bought an alfa network antenna : 802.11/g long-rangemodel awus036h.I have installed the driver following step by step the instructions from the driver's site.But I am only able to see only the other's SSIDs not MINE and also Even when i am forcing to connect to my SSID it doesn't connect. My network is not Hidden so I dont get it.
I have an HP pavillion desktop (s5360f) with Atheros 802.11 a/b/g/n Dualband Wireless Module and D-Link router DIR-615. My numerous Laptops and iPhons / iPads work fine, but this desktop which is further away from the router (in another room, about 20 meters) only shows 1-2 bars of wifi. First I bought a big additional D-Link antenna (7Ghz) but it didn't really help - sometimes connction shows 3 bars. I was told this antenna should help a lot. Then I checked with my router settings and saw that the HP uses "g" connection when everything else uses "n". I even set it to only use "n" but still it shows the HP using "g". I updated the driver (Atheros 9.2.0.113 for AR5B91), but it didn't help. I have "n" enabled in Atheros in Device manager. Now I'm lost and can't think of anything else that can be a problem and / or how to fix it... I don't have any thick walls between the router and the HP, my iPhone seems to work in this room just fine...
I just installed Windows 7 onto a Dell Vostro 230. After installing, the internet has a red X on it and it says no network adapter. I have no idea what to do.
I just reinstalled windows 7 ultimate 32 bit (I have the disc) but I cant connct to internet for it says there is no properly installed network adapter. o.Windows 7 Ultimate x32Version 6.1.7600 build 6700Intel Pentium (r) dual core cpu E5700 @ 3.0GHzBios version/date : American megatrends Inc. 080015,1/17/2011Problem Devices thernet Controlled PCIVEN_1969&Dev .. Etc..The drivers for this device are not installed
Client of mine has bought his notebook ASUS U31S with external DVD drive yesterday and he asked me to install windows 7 ultimate (origin was windows 7 home edition) beside other operating system Linux and Solaris. I divided the 500 GB hard disk but didn't touch the hidden partition that has recovery. I formatted the C partition that had windows 7 home edition and install a fresh copy of windows 7 ultimate,,,the process was smooth , first restart asking about username and computer name, password,,,etc ,,,,but with the second restart, PC kept rebooting without completing the windows installation. Although I have used the same windows 7 CD on his other new laptop and the installation went smooth without any problem. I tried different media same problem. This laptop does have an external DVD driv, of course it is an LG and brand new What could be the cause of this issue?
Client of mine has bought his notebook ASUS U31S with external DVD drive yesterday and he asked me to install windows 7 ultimate (origin was windows 7 home edition) beside other operating system Linux and Solaris.
I divided the 500 GB hard disk but didn't touch the hidden partition that has recovery.
I formatted the C partition that had windows 7 home edition and install a fresh copy of windows 7 ultimate,,,the process was smooth , first restart asking about username and computer name , password,,,etc ,,,,but with the second restart, PC kept rebooting without completing the windows installation.
Although I have used the same widnows 7 CD for his other new laptop and the installation went smooth without any problem.
I tried different media same problem. This laptop does have an external DVD driv, of course it is an LG and brand new
i have istalled a vlited version of Windows 7 into asus netbook with 8 + 4G ssd's i cant find the wireles adapter to get an internet conn, can anyone help?
I recently re-installed Windows 7 to my new SSD. Now my Wireless Adapter wont work. It's a "Netopia 3D Reach (ter/gusb-n1)" adapter (usb). The drivers that i came across all say that this adapter only goes up to vista, which doesnt make sense because it worked perfectly before i reinstalled my OS. What's wrong? If you find any kind of Window 7 driver
Well this is my 1st and very old computer about 6 years old already. Actually i never try it yet because this motherboard is running on XP for 6 years. I wanna try it but to make it sure i need a good advice of experts here.
Asus site their is no Windows 7 drivers. ASUSTeK Computer Inc. - Motherboards- ASUS P5VDC-X
if will the audio will really be installed on Windows 7 SP1?
I've recently came on my desktop and i realized that the internet connection was off it had a red XBut it was working fine before? im not sure what happened. Anyways i cannot seem to find the driver to download it nor do i know what it is.Amd Athlon ii x2 245 processor 2.9ghz4.00 gb64 bitati radeon 4200insiprion 570dell
I can't get my HP LaserJet 4 Plus parallel printer to work via USB to my new laptop with Windows 7 Premium 64 bit. My HP DeskJet 820 Cse doesn't work either.On eBay, I bought a USB to parallel printer cable adapter (Pluscom). Windows says it is working correctly, but nothing happens when connecting one of these two printers.First I tried to print with the LaserJet: nothing. Then the DeskJet: nothing. I'm even unable to edit the properties of the DeskJet: Windows tells me that the print spooler is not working (I don't receive this error message while choosing the LaserJet).A system restore to some days earlier (before I installed the printers) is also failing; Windows tells me this is because of antivirus (Avira free antivirus, up-to-date).
I have a IBM Thinkpad T41, with Windows 7 installed, it has the symbol for wireless LAN on the screen surround but I can't get the device to show up in device manager, I tried installing the drivers as per the instructions, it does have it, how do I get it to operate? it doesn't show up in the adapter settings either
I just got a new HP desktop, and a wireless router to put into the USB port. It worked perfectly after initial install with the drivers, but after coming back from sleep, it does not see the adapter, and I have to re install the drivers to get it to work. If I shut down the system, then turn it back on, the adapter works perfectly.
I have recently reinstalled Windows 7 and my Internal Internet Adapter didnt install correctly, and when I go on the HP Site and try to download it, it finishes installing and then instantly closes the programs, and I cannot find the driver/software on my laptop... heres some info:Laptop Serial Number: 2CE1460K47
I have a notebook asus that doesn't have a disk drive or whater its called. I accidently turned my computer off while it was just starting to configure windows. I tried to turn it back on but it just says launch star up repair (which says it cant fix the problem) and start windows normally (which just brings it back to the original screen.
I have an newer HP Netbook running Windows 7. I recently installed Open Office 3.3 on the machine, and it works fine, except for some key sequences. For example, in the OO Writer, the key sequence Ctrl-Home should move the cursor to the top of the doc. This works fine on my older HP XP Pro laptop, but my netbook ignores or doesn't understand it. I have removed OO and reinstalled it, but the problem still occurs. So, I guess I need to figure out if this is a Windows or Open Office issue.
I had to buy laptop because my desktop with winxp died. Now how do I get the scanner to work with win7? I need to scan medical records. The scanner is a Canon Lide 55.
Tech Support Guy System Info Utility version 1.0.0.1win7, scanner OS Version: Microsoft Windows 7 Home Premium , 64 bit Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 5 Processor Count: 2 RAM: 1844 Mb Graphics Card: Intel(R) HD Graphics, 730 Mb Hard Drives: C: Total - 260242 MB, Free - 222580 MB; D: Total - 29690 MB, Free - 28507 MB; Motherboard: LENOVO, MoutCook, Not Applicable, WB01561071 Antivirus: avast! Antivirus, Updated and Enabled
I hav window 7 installed on two hard drives...My E:/ windows work properly for the internet browsers ,Mozilla,safari.... means I'm able to login to the internet account but when I use the C:/ window 7 .. all the browsers doesn't work at all.... all of them shows TRY AGAIN all the time . So, I hav to first log on from the E windows and then restart and use internet in the C windows..
I connect some XP (Pro, 32 bit) Clients using a bat file to our NAS (Still using workgroups, no server)The command in the bat file is like this
net use \NAS01 /user:Admin Password net use \10.70.1.10 /user:Admin Password or net use \NAS01 /user:coputernameAdmin Password net use \10.70.1.10 /user:coputernameAdmin Password
This is working with all my XP clients pretty fine. No I want to do the same with a Windows 7(Pro, 32 bit) Client .The exact same command occurs this error message: System error 1326 has occurred.Logon failure: unknown user name or bad password.(Username and password are correct, working on all XP clients)is that when I am using a non existing user name and any password, i says: The command completed successfully.
I'm trying to install VMWare Workstation v7 (the trial) on my Windows 7 PC, but whenever I start the setup, I just get a blank screen :S. It's really weird. Even after 2 hours nothing happened. Can you guys help me?
I have many years of experience with Windows OSes, but one thing about Win7 is stumping me. I have an application that I want to open when I log in. It's Speedfan, so I can monitor temperatures. I put a shortcut to it in my Start Menu - Programs - Startup folder. If I click on that shortcut it starts the app. But the app never starts when I log in. It shows in the start menu in MSCONFIG and it is enabled.
i am on windows 7 and for a week, my keyboard doesn't work. the key p, return, tab, and some others won't work. ma visual keyboard works fine - except the question mark - . i tried the pilots, and the computer says it has the best pilots so no need to update. i don't know where it comes from, but then, after a windows update, my keyboard came back to normal. it worked fine for three days and then, again, it screw up. it's always the same keys that don't work, so i don't think my keyboard is worn out. my computer is only one year old. it's a sony vaio laptop. each time i press the p key, for example, the start button -physical one- blinks. same for the other buttons. when i press the return key, the start button blinks. and while i am having this problem, my computer has trouble loading. sometimes it freezes and i have to unplug it and remove the battery to reboot.
