I have a IBM Thinkpad T41, with Windows 7 installed, it has the symbol for wireless LAN on the screen surround but I can't get the device to show up in device manager, I tried installing the drivers as per the instructions, it does have it, how do I get it to operate? it doesn't show up in the adapter settings either
View 2 RepliesJust reformatted my alienware laptop because I haven't used it in months. Now I don't even see "Network Adapter" listed under device manager so when trying to install the driver i don't think it had any effect. Running m15x windows 7 home premium 64 bit.
View 12 Replies View RelatedI just got a new HP desktop, and a wireless router to put into the USB port. It worked perfectly after initial install with the drivers, but after coming back from sleep, it does not see the adapter, and I have to re install the drivers to get it to work. If I shut down the system, then turn it back on, the adapter works perfectly.
View 6 Replies View RelatedMy wireless printer was working until we got a storm. Now it doesn't show ip,but it works with the desktop not wireless
View 1 Replies View RelatedDo I need a wireless adapter to make my desktop wireless!
View 2 Replies View Related1 week ago hamachi was working great until i decided to uninstall east smart security nod 32 and download and install the new version of the anti-virus.
i had like 8 unknown devices that the stupid firewall anti-virus nod32 has created and i by mistake i uninstalled the hamachi network adapter drivers and since then i can't install any virtual network drivers at all even Tunngle wont install his drivers.
today i cleaned all my register with some program and i have deleted all the stupid nod 32 firewall drivers and i have uninstalled hamachi software and installed it again and its the same.
please help how can i let my stupid windows 7 install the network adapter drivers for hamachi
and yes i have the latest version of hamachi.
I recently installed windows 7 but the cd rom just doesnt show
View 1 Replies View Relatedmy laptop don't show LAN adapter & don't detect inter-net cable
View 1 Replies View RelatedI cannot for the life of me get my internet to work.. more specifically it keeps telling me I need to install network drivers.I checked BIOS and LAN settings are all good.I've tried installing a realtek driver update.On my device manager not the network adapter tree does not even show up. I've done 2 full re-installs of windows 7 and no luck.I'm using an ASUS M4A89GTD PRO mobo, running windows 7 Ultimate 64bit.
View 9 Replies View RelatedWindows 7 has it's own 80gb harddrive but i have another HDD with Ubuntu 9.10 in a 20GB partition and a sharedNTFS in the remaining 130~ GB.
The NTFS partition used to show up in 'My Computer' fine, but after re-installing Ubuntu 9.10 it doesn't. (NO i have not erased the entire disc as i can still access it in Ubuntu and it has all my files etc on)
Any ideas on how to get it to show up? it's even missing from the disc manager.
My External USB Hard Drive doesn't show up in My Computer Win 7 64bit.
I've just received my Western Element 2,5Tb today. When I first plugged it in, it worked normally. But due to my over-excitement, I copied too much files at the same time and it wasn't working anymore. I regretted doing this immediately.
I have searched on the internet to find some solutions but all of them didn't work. I've checked the Computer Management, Disk Management, but nothing about my External HD showed up. In the notification area, my laptop still detected it and I can removed it properly [even though i can't use it at all].
I tried to connect to my USB and another Samsung 500Gb HDD. And it worked perfectly fine. Then, I tried to connect my new HDD to my sister's lap [she is using Window Vista] and it worked perfectly fine too.
i only see a blackscreen until the logon screen shows up.
View 4 Replies View RelatedI would like to change the default program for .pdf from TeXworks to foxit reader, but the file extension .pdf doesn't show upfoxit also doesn't show up in the set default programsi can "open with" foxit and texworks, i would just like to quickly be able to open .pdfs with a double click
View 2 Replies View RelatedThis has been happening for a while now whats happening is i would drag something to the desktop and it wouldn't show but when i go to Start>Computer>Desktop it shows it in the folder but not actually on the desktop
View 4 Replies View RelatedI just installed windows 7 on a home built desktop. Everything seems to be running fine except my 3rd hard drive won't show up. In device manager it shows all 3 hard drives, but in My Computer it only shows 2.
The hard drive that isn't showing up in My Computer (but showing up in Device Manager), is a Seagate Barracuda 7200.12 1 TB.
The hard drives that are showing up are both Seagate Barracuda 7200.11 but one is a 500 GB the other is a 750 GB.
I am trying to boot from a Windows & Installation disk on a eMachine T3522.
What I am doing is just after turning the PC on I press F10 and the following Options come up:
As you can see booting from the DVD doesn't isn't an option although you can access it from inside Windows? Do anyone have any thing I can try to fix this problem?
I just installed windows 7 on my 64gb SSD sata3 hard drive i did a clean install. Now my 1TB Hard doesnt show up in windows. It shows it in the bois and in the device manager but thats it....
View 1 Replies View RelatedI am trying to overwrite Win7 32-bit with Win7 64-bit. When I run Win7 install it does not find my two HDDs (they are RAID-1). When I look in my Device Manager (before starting the install process) under "Disk Drives" it only shows "GRAID SCSI disk device" and some other drives that are not hard drives. It does not show two HDDs. The BIOS shows both drives and shows a GRAID-1 configuration. I am not sure what to do next to get Win7 to either find the HDDs to write the new Win7 to or do something with the "GRAID SCSI disk device." I bought this machine like this and am not familiar with how to set these things up: I am not an expert.
View 7 Replies View RelatedI bought these new headphones Ozone Attack, and the sound works great on them, but the microphone doesn't work in any program. Doesn't work in Skype, TS3, and it doesn't even pick it up in Recording Devices. It's the kind of headset where it's not a USB; it's got a plug for the mic and another for the headphones. They're both plugged in firmly, and I've updated my audio thing which is IDT High Definition Audio CODEC. My laptop is a HP Pavilion g6-1241sa Notebook PC. I've also gone into Recording Devices and checked for any disabled mics, but the one in my headset isn't there. And even though my headset is set as the Default Communication Device, the mic doesn't get picked up under Recording Devices. Push to Talk is also not on. The headset is also shown only under Playback Devices.
View 8 Replies View RelatedI have a small problem with my Windows 7. Here's what happened:Yesterday, my pc was running fine. I turned it on at 10am and it was running well. My sister ordered a new router so I set it up for her (AirPort Extreme). I installed the utility for it, was a simple setup for me. After that, I connect to it wirelessly and I see that windows update has a few security updates. They install as I turn off the pc. I then turn it back on a few hrs later and notice that when it reaches the login screen, it takes a few secs for it to load. This is unusual being that the days before it was always ready to receive input. So I login, get the welcome screen, and my desktop screen. Taskbar loads as usual, however I can't get anything to show up when I click on it. I think at first that its Comodo (is in training mode) so I close it out. Still nothing. I then press ctrl+alt+delete. Nothing. I then press it rapidly to see what happens. After a few mins, my screen turns black. A message then shows up that ctrl+alt+delete has been pressed but due to something that it won't show up. Had to press either the power button or esc to leave the screen. Safe mode works. I do a system restore back to when the windows update and to the installation of the router. I scanned and haven't found anything yet. Today, my pc looks like its running fine but its still taking a few secs on the login screen and the desktop still idles. I'm going to contact HP to see what they can do but I wanted a second opinion.
Here's my specs (looks like this):
HP Pavilion dv7t-7000 Quad Edition
Windows 7 Home Premuim 64-bit
Intel core i7-3820QM CPU @ 2.70GHz
8GB RAM
1TB hard drive
NVIDIA GeForce GT 650M
I have a win application that performs some long calculation, and since it's single threaded it doesn't refresh the window in the process. I was wondering why show desktop won't work because of that? I mean I know the answer, show desktop sends a minimize commands to all the windows, and this app won't respond.
View 3 Replies View RelatedI just installed Windows 7 Ultimate 64 bit OS. The BIOS sees both hard drives and the CD and DVD drive and the Windows Device Manager shows the extra hard drive and both optical drives. When I click the folder in the task bar (Libraries) I can only see "C" drive and no optical drives either. When I click on the CD drive I get the right menues for it, but it does not work at all. If I put a CD in the drive it locks up the system and I have to power off the computer before I can eject it.
System Info:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
[Code].....
I had installed windows 7 32 bit and it had compatibility issue with my Thomson Speedtouch since it doesnt have windows 7 driver I found a tweaked one online and was using it and it worked fine. Suddenly it stopped working and I formatted and reinstalled windows 7 but I was not able to connect the net. The message is always no valid IP configuration. I tried even with a router but the message is the same. So I installed XP on the other partition and I have no problem connecting to the net. Now I want to format the other partition and reinstall windows 7 but I am not able to format the partition from XP or with the installation CD for windows 7.With XP the format fails and with the installation DVD it always goes into BSD.What to do? On startup the previous installation of windows 7 doesnt even show up and goes directly into XP?!
View 5 Replies View RelatedRecently I bought Toshiba Sattelite C670-1DJ and today I accidentally unplugged my AC cable. So I started it and it started computer with "Starting your computer for first use" or something like that.It logged in temporary Administrator account and when I tried to switch to my account, it wasn't there, however there is my folder in C:/users.I tried to reboot computer and edit registrs(I am a begginer in Windows, so i didn't try to do something extraordinary) but nothing help, i cannot log in my account.
View 1 Replies View RelatedMy computer doesn't show asian characters...including languages like Hindi, Arabic, Chinese(all), Japanese, Korean, Gujarati etc....I have many files in these languages but because of problem it shows only boxes in file names....There is no problem in displaying characters in browsers and word processors...Sometimes it shows all characters correctly but sometimes it doesn't. After reboot it shows them correctly, but not every time.
View 8 Replies View RelatedRecently I bought Toshiba Sattelite C670-1DJ and today I accidentally unplugged my AC cable. So I started it and it started computer with "Starting your computer for first use" or something like that. It logged in temporary Administrator account and when I tried to switch to my account, it wasn't there, however there is my folder in C:/users. I tried to reboot computer and edit registrs(I am a begginer in Windows, so i didn't try to do something extraordinary) but nothing help, i cannot log in my account. I need to get in my account, there are few specific programms that won't run.
View 1 Replies View RelatedI have a Seagate External Hard drive, Desk Goflex 3 TB.I'm using it for sevral mounth in windows 7 and it's working fine.Now, I bought a new latop using windows 7 as well, and it's not recognizing my hard drive.The hard drive doesn't appear in the Disk Management at all.The computer does recognize other USB devices (disk-on-keys, mouse).
View 1 Replies View RelatedMy partitions when I enter the setup doesn't show up. Windows 7 64Bit installed first.
View 9 Replies View RelatedI have three computers: one Windows 7 x64, one Windows 7 x86, and XP SP3 on an Asus Eee 1005HA. The Win 7 x86 machine can see all the computers and shares. The XP machine can see all the computers and shares. The Win 7 x64 machine can see the other Win 7 machine but not the XP machine (the XP machine doesn't show up in Windows Explorer). The XP machine can browse the shares on the Win 7 machine.
Any idea why the Win 7 x64 machine can't see the XP machine? Thanks.
P.S. Both Windows 7 machines are running 7100, and all are connecting to each other over a gigabit switch.
right the problem is when i got to disk defragment - my local disk C: doesnt show up to be defragged :/
View 6 Replies View RelatedMy language bar is missing. How to find ??
View 2 Replies View Related