Can't Install Windows 7 / Doesn't Even Show Up And Goes Directly Into XP
Feb 27, 2011
I had installed windows 7 32 bit and it had compatibility issue with my Thomson Speedtouch since it doesnt have windows 7 driver I found a tweaked one online and was using it and it worked fine. Suddenly it stopped working and I formatted and reinstalled windows 7 but I was not able to connect the net. The message is always no valid IP configuration. I tried even with a router but the message is the same. So I installed XP on the other partition and I have no problem connecting to the net. Now I want to format the other partition and reinstall windows 7 but I am not able to format the partition from XP or with the installation CD for windows 7.With XP the format fails and with the installation DVD it always goes into BSD.What to do? On startup the previous installation of windows 7 doesnt even show up and goes directly into XP?!
View 5 Replies
ADVERTISEMENT
Jun 30, 2012
I am trying to overwrite Win7 32-bit with Win7 64-bit. When I run Win7 install it does not find my two HDDs (they are RAID-1). When I look in my Device Manager (before starting the install process) under "Disk Drives" it only shows "GRAID SCSI disk device" and some other drives that are not hard drives. It does not show two HDDs. The BIOS shows both drives and shows a GRAID-1 configuration. I am not sure what to do next to get Win7 to either find the HDDs to write the new Win7 to or do something with the "GRAID SCSI disk device." I bought this machine like this and am not familiar with how to set these things up: I am not an expert.
View 7 Replies
View Related
Aug 7, 2012
my brother's hdd in his laptop was going bad, it kept failing to boot. so i replaced it with another one. when i turned the laptop back on it started installing all the drivers for his hardware (windows was already installed on the 2nd hdd) and prompted me to reboot. after i did windows failed to start several times. i re-installed windows from scratch, and now his graphics card isn't showing up in device manager and windows cant find a driver for the network or ethernet card.
his specs:
gateway
windows 7 professional x64
ati mobility radeon hd 4250
broadcom bcm943225hm (network card)
amd phenom II x4 n9790
4gb ddr3
View 1 Replies
View Related
Jan 13, 2012
I just installed windows 7 on my 64gb SSD sata3 hard drive i did a clean install. Now my 1TB Hard doesnt show up in windows. It shows it in the bois and in the device manager but thats it....
View 1 Replies
View Related
Jan 8, 2013
I bought these new headphones Ozone Attack, and the sound works great on them, but the microphone doesn't work in any program. Doesn't work in Skype, TS3, and it doesn't even pick it up in Recording Devices. It's the kind of headset where it's not a USB; it's got a plug for the mic and another for the headphones. They're both plugged in firmly, and I've updated my audio thing which is IDT High Definition Audio CODEC. My laptop is a HP Pavilion g6-1241sa Notebook PC. I've also gone into Recording Devices and checked for any disabled mics, but the one in my headset isn't there. And even though my headset is set as the Default Communication Device, the mic doesn't get picked up under Recording Devices. Push to Talk is also not on. The headset is also shown only under Playback Devices.
View 8 Replies
View Related
Jul 12, 2012
I have a small problem with my Windows 7. Here's what happened:Yesterday, my pc was running fine. I turned it on at 10am and it was running well. My sister ordered a new router so I set it up for her (AirPort Extreme). I installed the utility for it, was a simple setup for me. After that, I connect to it wirelessly and I see that windows update has a few security updates. They install as I turn off the pc. I then turn it back on a few hrs later and notice that when it reaches the login screen, it takes a few secs for it to load. This is unusual being that the days before it was always ready to receive input. So I login, get the welcome screen, and my desktop screen. Taskbar loads as usual, however I can't get anything to show up when I click on it. I think at first that its Comodo (is in training mode) so I close it out. Still nothing. I then press ctrl+alt+delete. Nothing. I then press it rapidly to see what happens. After a few mins, my screen turns black. A message then shows up that ctrl+alt+delete has been pressed but due to something that it won't show up. Had to press either the power button or esc to leave the screen. Safe mode works. I do a system restore back to when the windows update and to the installation of the router. I scanned and haven't found anything yet. Today, my pc looks like its running fine but its still taking a few secs on the login screen and the desktop still idles. I'm going to contact HP to see what they can do but I wanted a second opinion.
Here's my specs (looks like this):
HP Pavilion dv7t-7000 Quad Edition
Windows 7 Home Premuim 64-bit
Intel core i7-3820QM CPU @ 2.70GHz
8GB RAM
1TB hard drive
NVIDIA GeForce GT 650M
View 4 Replies
View Related
Feb 23, 2013
I just installed Windows 7 Ultimate 64 bit OS. The BIOS sees both hard drives and the CD and DVD drive and the Windows Device Manager shows the extra hard drive and both optical drives. When I click the folder in the task bar (Libraries) I can only see "C" drive and no optical drives either. When I click on the CD drive I get the right menues for it, but it does not work at all. If I put a CD in the drive it locks up the system and I have to power off the computer before I can eject it.
System Info:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
[Code].....
View 6 Replies
View Related
Jun 14, 2012
Recently I bought Toshiba Sattelite C670-1DJ and today I accidentally unplugged my AC cable. So I started it and it started computer with "Starting your computer for first use" or something like that.It logged in temporary Administrator account and when I tried to switch to my account, it wasn't there, however there is my folder in C:/users.I tried to reboot computer and edit registrs(I am a begginer in Windows, so i didn't try to do something extraordinary) but nothing help, i cannot log in my account.
View 1 Replies
View Related
Jun 14, 2012
Recently I bought Toshiba Sattelite C670-1DJ and today I accidentally unplugged my AC cable. So I started it and it started computer with "Starting your computer for first use" or something like that. It logged in temporary Administrator account and when I tried to switch to my account, it wasn't there, however there is my folder in C:/users. I tried to reboot computer and edit registrs(I am a begginer in Windows, so i didn't try to do something extraordinary) but nothing help, i cannot log in my account. I need to get in my account, there are few specific programms that won't run.
View 1 Replies
View Related
Jul 14, 2011
I recently upgraded a Packard Bell desktop to Windows 7. It was originally XP. When I installed 7, it didn't look the same as my laptop that had 7 pre-installed when bought. On the desktop, it doesn't show previews of windows on the taskbar when scrolled over etc. Can I make it the same as the laptop?
View 14 Replies
View Related
Aug 10, 2012
I'm encountering an extremely strange issue on my desktop. I keep getting SSL errors when ever I try to go to google.com, gmail.com or dozens of other sites on google chrome. The exact error is "The site's security certificate is signed using a weak signature algorithm". I can't reach the site at all.Windows Update service is also not running and doesn't even show up in "services.msc". I get this error "Windows update cannot currently check for updates because the service is not running. You may need to restart your computer". Obviously restarting doesn't help. I also got a similar error for Microsoft Security Essentials, and it wouldn't run at all so I uninstalled it.MSI Afterburner also gives me an error when I start it up about how I need to restart to properly detect my hard ware, but I didn't do that before and I tried restarting with that as well.I've run many, many, scans to detect trojans, viruses, and spyware using AVG Free, Spybot Search and Destroy, Malware Bytes, Spyware Doctor, Kapernsky's Rootkit tool. AVG, and Malware Bytes both turned up and deleted some basic malware & spyware. The others can't detect anything.
View 18 Replies
View Related
May 8, 2012
I have been experiencing same problem in the link above and on both my laptop and my desktop,,,,both of them have same windows 7 ultimate 64 bitWhen I download any file to the desktop I am not able to see it unless I browse to the path C:UsersjohnDesktop,,,,then I would be able to see that file
View 9 Replies
View Related
Dec 6, 2011
pendrive and card reader thumbnail doesnt show in my computer, even i went to compmgmt disk management setting to change the drive path, its show same problem.
View 1 Replies
View Related
Dec 2, 2012
I recently installed windows 7 but the cd rom just doesnt show
View 1 Replies
View Related
Aug 9, 2010
I just bought a Gateway computer yesterday with Windows 7 preinstalled on it, and last night I tried to wake it from sleep but when I did, it didn't show the taskbar, icons or start button. All I could see was the background. I tried the "ctrl+shift+esc" method to fix it, but when I hit those keys nothing happened. I'm at a loss, and I don't want to return the computer!
View 3 Replies
View Related
Oct 30, 2009
Windows 7 has it's own 80gb harddrive but i have another HDD with Ubuntu 9.10 in a 20GB partition and a sharedNTFS in the remaining 130~ GB.
The NTFS partition used to show up in 'My Computer' fine, but after re-installing Ubuntu 9.10 it doesn't. (NO i have not erased the entire disc as i can still access it in Ubuntu and it has all my files etc on)
Any ideas on how to get it to show up? it's even missing from the disc manager.
View 7 Replies
View Related
Nov 16, 2012
My External USB Hard Drive doesn't show up in My Computer Win 7 64bit.
I've just received my Western Element 2,5Tb today. When I first plugged it in, it worked normally. But due to my over-excitement, I copied too much files at the same time and it wasn't working anymore. I regretted doing this immediately.
I have searched on the internet to find some solutions but all of them didn't work. I've checked the Computer Management, Disk Management, but nothing about my External HD showed up. In the notification area, my laptop still detected it and I can removed it properly [even though i can't use it at all].
I tried to connect to my USB and another Samsung 500Gb HDD. And it worked perfectly fine. Then, I tried to connect my new HDD to my sister's lap [she is using Window Vista] and it worked perfectly fine too.
View 4 Replies
View Related
Sep 26, 2009
i only see a blackscreen until the logon screen shows up.
View 4 Replies
View Related
Sep 11, 2010
I would like to change the default program for .pdf from TeXworks to foxit reader, but the file extension .pdf doesn't show upfoxit also doesn't show up in the set default programsi can "open with" foxit and texworks, i would just like to quickly be able to open .pdfs with a double click
View 2 Replies
View Related
Jul 3, 2011
This has been happening for a while now whats happening is i would drag something to the desktop and it wouldn't show but when i go to Start>Computer>Desktop it shows it in the folder but not actually on the desktop
View 4 Replies
View Related
Dec 23, 2009
I just installed windows 7 on a home built desktop. Everything seems to be running fine except my 3rd hard drive won't show up. In device manager it shows all 3 hard drives, but in My Computer it only shows 2.
The hard drive that isn't showing up in My Computer (but showing up in Device Manager), is a Seagate Barracuda 7200.12 1 TB.
The hard drives that are showing up are both Seagate Barracuda 7200.11 but one is a 500 GB the other is a 750 GB.
View 3 Replies
View Related
Sep 18, 2009
I am trying to boot from a Windows & Installation disk on a eMachine T3522.
What I am doing is just after turning the PC on I press F10 and the following Options come up:
As you can see booting from the DVD doesn't isn't an option although you can access it from inside Windows? Do anyone have any thing I can try to fix this problem?
View 3 Replies
View Related
Nov 2, 2012
I have a IBM Thinkpad T41, with Windows 7 installed, it has the symbol for wireless LAN on the screen surround but I can't get the device to show up in device manager, I tried installing the drivers as per the instructions, it does have it, how do I get it to operate? it doesn't show up in the adapter settings either
View 2 Replies
View Related
Jul 19, 2012
I have a win application that performs some long calculation, and since it's single threaded it doesn't refresh the window in the process. I was wondering why show desktop won't work because of that? I mean I know the answer, show desktop sends a minimize commands to all the windows, and this app won't respond.
View 3 Replies
View Related
May 30, 2012
My computer doesn't show asian characters...including languages like Hindi, Arabic, Chinese(all), Japanese, Korean, Gujarati etc....I have many files in these languages but because of problem it shows only boxes in file names....There is no problem in displaying characters in browsers and word processors...Sometimes it shows all characters correctly but sometimes it doesn't. After reboot it shows them correctly, but not every time.
View 8 Replies
View Related
Oct 11, 2012
I have a Seagate External Hard drive, Desk Goflex 3 TB.I'm using it for sevral mounth in windows 7 and it's working fine.Now, I bought a new latop using windows 7 as well, and it's not recognizing my hard drive.The hard drive doesn't appear in the Disk Management at all.The computer does recognize other USB devices (disk-on-keys, mouse).
View 1 Replies
View Related
Aug 30, 2012
My partitions when I enter the setup doesn't show up. Windows 7 64Bit installed first.
View 9 Replies
View Related
Jul 28, 2009
I have three computers: one Windows 7 x64, one Windows 7 x86, and XP SP3 on an Asus Eee 1005HA. The Win 7 x86 machine can see all the computers and shares. The XP machine can see all the computers and shares. The Win 7 x64 machine can see the other Win 7 machine but not the XP machine (the XP machine doesn't show up in Windows Explorer). The XP machine can browse the shares on the Win 7 machine.
Any idea why the Win 7 x64 machine can't see the XP machine? Thanks.
P.S. Both Windows 7 machines are running 7100, and all are connecting to each other over a gigabit switch.
View 4 Replies
View Related
Jun 1, 2011
right the problem is when i got to disk defragment - my local disk C: doesnt show up to be defragged :/
View 6 Replies
View Related
Jun 18, 2011
My language bar is missing. How to find ??
View 2 Replies
View Related
Nov 2, 2012
I have plenty of images on my computer and always used to see thumbnails; suddenly I only see a placeholder. I have tried Explorer - Organise - Folder and Search Options - View etc.; I also tried Control Panel - System - Advanced System Settings - Performance, but none of those two options works...
View 1 Replies
View Related
