Recently I bought Toshiba Sattelite C670-1DJ and today I accidentally unplugged my AC cable. So I started it and it started computer with "Starting your computer for first use" or something like that. It logged in temporary Administrator account and when I tried to switch to my account, it wasn't there, however there is my folder in C:/users. I tried to reboot computer and edit registrs(I am a begginer in Windows, so i didn't try to do something extraordinary) but nothing help, i cannot log in my account. I need to get in my account, there are few specific programms that won't run.
Recently I bought Toshiba Sattelite C670-1DJ and today I accidentally unplugged my AC cable. So I started it and it started computer with "Starting your computer for first use" or something like that.It logged in temporary Administrator account and when I tried to switch to my account, it wasn't there, however there is my folder in C:/users.I tried to reboot computer and edit registrs(I am a begginer in Windows, so i didn't try to do something extraordinary) but nothing help, i cannot log in my account.
I have shared the printer attached to the Vista PC, but only one of the laptop accounts/users can add this networked printer.Laptop user A has added the networked printer & printed to it, but user B can't even discover the printer. I have networked & shared everything under the sun.
i start my pc up (from being off) and get logged into a temp user profile. It tells me that i cannot acess my user profile and all information will be deleted on logging out. I've looked online for a soloution but none work for me ,I really dont know how to resolve this problem,I have limited knowledge and computer skills. i really dont want to scrap this drive and start over.
when i start my machine (laptop)i get a logon screen and i can choose 2 account my own admin account and a nother account called: ''other account''and before this it was allright I will put a Picture on how it looks like
I am using Windows 7 Pro 64x and apparently the default user account (Owner) that I use is not working correctly. Unless I have UAC set to Never Notify, I cannot open Control Panel or UAC again. I have created a second user account as Administrator and it works correctly.
I would like to know if there is any way to fix this problem short of a clean install of Windows. If not, is it possible to move all of my settings to the user account that works correctly and delete the one that does not.
I'm hoping to teach Mum how to use my PC in the near future and she will only be using it for typing etc and maybe the internet. Also she only use it sometimes. shall I create a Limited User Account for her or turn on the Guest Account?
I would appreciate any help identifying the cause of extremely slow log on times for a user account on our family laptop. The machine is running Windows 7 - 64-bit version, and currently has 3 users accounts 2 admin and 1 regular. The regular account has begun to experience log on times that last for minutes (The Welcome splash screen prior to log on screen), while the admin accounts have no problems. I have seen other posts regarding slow log on times, but I haven't seen those which address the issue for a specific user account.
I have always been running admin and even until now I run as admin. But, I have been doing a little bit of research and realize that using a standard account is a safer practice. I have never even used a standard account.Is using a standard account a better practice? Also, how does doing average task such as installing programs and updating work through the standard user account?
I was trying some stuff that other day and I made an account and made it administrator type and made another one with a standard user type, now the problem is I have hidden my administrator account and I can't bring back because I can't access nothing from this standard user account, everything that requires an administrator perdition just give me that message "DO YOU WANT TO ALLOW THE FOLLOWING PROGRAM TO MAKE CHANGES TO YOUR COMPUTER" there is OK and cancel but I can't press OK, I tried changing the dword value to one But it says I am not permitted or something like that, I tried going through dos But i couldn't it says access denied.
How do I map existing User Folders to a newly created User Account?I had existing User Folders on drive D. I added a new drive C and installed the OS on C but changed default location of User Folders to D. Now my existing User Folders are in the Users folder on D but there is no User Account associated with them. If I create a user account with the same name will it map to the existing folder within Users?I did a test of this. I created a folder called Test within Users then created a User account called Test and logged in. It created another folder within Users called Test.Computername.
My father's girlfriend is giving this Toshiba laptop to my father, and I'm charged with setting this up.Starting off, the only (non-Guest) account has been:
[HerName] Administrator
I created:
[HisName] Adminsitrator
So when you boot up Windows 7, it lands here:
[HerName] [HisName] Administrator Adminstrator
1) To put [HisName] first, on the left?or better yet, 2) Remove [HerName] from the logon screen, keeping the account so it can be switched to?
I just installed windows 7 on my 64gb SSD sata3 hard drive i did a clean install. Now my 1TB Hard doesnt show up in windows. It shows it in the bois and in the device manager but thats it....
I am trying to overwrite Win7 32-bit with Win7 64-bit. When I run Win7 install it does not find my two HDDs (they are RAID-1). When I look in my Device Manager (before starting the install process) under "Disk Drives" it only shows "GRAID SCSI disk device" and some other drives that are not hard drives. It does not show two HDDs. The BIOS shows both drives and shows a GRAID-1 configuration. I am not sure what to do next to get Win7 to either find the HDDs to write the new Win7 to or do something with the "GRAID SCSI disk device." I bought this machine like this and am not familiar with how to set these things up: I am not an expert.
I bought these new headphones Ozone Attack, and the sound works great on them, but the microphone doesn't work in any program. Doesn't work in Skype, TS3, and it doesn't even pick it up in Recording Devices. It's the kind of headset where it's not a USB; it's got a plug for the mic and another for the headphones. They're both plugged in firmly, and I've updated my audio thing which is IDT High Definition Audio CODEC. My laptop is a HP Pavilion g6-1241sa Notebook PC. I've also gone into Recording Devices and checked for any disabled mics, but the one in my headset isn't there. And even though my headset is set as the Default Communication Device, the mic doesn't get picked up under Recording Devices. Push to Talk is also not on. The headset is also shown only under Playback Devices.
I have a small problem with my Windows 7. Here's what happened:Yesterday, my pc was running fine. I turned it on at 10am and it was running well. My sister ordered a new router so I set it up for her (AirPort Extreme). I installed the utility for it, was a simple setup for me. After that, I connect to it wirelessly and I see that windows update has a few security updates. They install as I turn off the pc. I then turn it back on a few hrs later and notice that when it reaches the login screen, it takes a few secs for it to load. This is unusual being that the days before it was always ready to receive input. So I login, get the welcome screen, and my desktop screen. Taskbar loads as usual, however I can't get anything to show up when I click on it. I think at first that its Comodo (is in training mode) so I close it out. Still nothing. I then press ctrl+alt+delete. Nothing. I then press it rapidly to see what happens. After a few mins, my screen turns black. A message then shows up that ctrl+alt+delete has been pressed but due to something that it won't show up. Had to press either the power button or esc to leave the screen. Safe mode works. I do a system restore back to when the windows update and to the installation of the router. I scanned and haven't found anything yet. Today, my pc looks like its running fine but its still taking a few secs on the login screen and the desktop still idles. I'm going to contact HP to see what they can do but I wanted a second opinion.
Here's my specs (looks like this):
HP Pavilion dv7t-7000 Quad Edition Windows 7 Home Premuim 64-bit Intel core i7-3820QM CPU @ 2.70GHz 8GB RAM 1TB hard drive NVIDIA GeForce GT 650M
I just installed Windows 7 Ultimate 64 bit OS. The BIOS sees both hard drives and the CD and DVD drive and the Windows Device Manager shows the extra hard drive and both optical drives. When I click the folder in the task bar (Libraries) I can only see "C" drive and no optical drives either. When I click on the CD drive I get the right menues for it, but it does not work at all. If I put a CD in the drive it locks up the system and I have to power off the computer before I can eject it.
System Info: Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
I had installed windows 7 32 bit and it had compatibility issue with my Thomson Speedtouch since it doesnt have windows 7 driver I found a tweaked one online and was using it and it worked fine. Suddenly it stopped working and I formatted and reinstalled windows 7 but I was not able to connect the net. The message is always no valid IP configuration. I tried even with a router but the message is the same. So I installed XP on the other partition and I have no problem connecting to the net. Now I want to format the other partition and reinstall windows 7 but I am not able to format the partition from XP or with the installation CD for windows 7.With XP the format fails and with the installation DVD it always goes into BSD.What to do? On startup the previous installation of windows 7 doesnt even show up and goes directly into XP?!
My win 7 laptop seemed to hang at user logon, no mouse or keyboard response. I did forced shutdown. After that Windows detect some problem, want to do the recovery boot. It goes to the point where I see windows screen, I never see a logon icon. How long should I wait ? I try to boot from CD, the same. it hangs and I never see the user icons. I try to run the repair option from CD. It hangs at Starting setup.
There is a command in the Resource Kit Tools (SHOWPRIV.EXE) for earlier versions of Windows. I don't find a link for a downloadable RKT set for Win7 (though I see some online references to it's existence.
Bottom line: Is there is a PowerShell script / command to help enumerate the permissions of the logged on user, providing a similar output to showpriv?
I recently upgraded a Packard Bell desktop to Windows 7. It was originally XP. When I installed 7, it didn't look the same as my laptop that had 7 pre-installed when bought. On the desktop, it doesn't show previews of windows on the taskbar when scrolled over etc. Can I make it the same as the laptop?
I'm encountering an extremely strange issue on my desktop. I keep getting SSL errors when ever I try to go to google.com, gmail.com or dozens of other sites on google chrome. The exact error is "The site's security certificate is signed using a weak signature algorithm". I can't reach the site at all.Windows Update service is also not running and doesn't even show up in "services.msc". I get this error "Windows update cannot currently check for updates because the service is not running. You may need to restart your computer". Obviously restarting doesn't help. I also got a similar error for Microsoft Security Essentials, and it wouldn't run at all so I uninstalled it.MSI Afterburner also gives me an error when I start it up about how I need to restart to properly detect my hard ware, but I didn't do that before and I tried restarting with that as well.I've run many, many, scans to detect trojans, viruses, and spyware using AVG Free, Spybot Search and Destroy, Malware Bytes, Spyware Doctor, Kapernsky's Rootkit tool. AVG, and Malware Bytes both turned up and deleted some basic malware & spyware. The others can't detect anything.
I have laptop gifted to me, with a user name which I want to change.I have the following steps in mind:
1. Create a new administrator account 2. Copy the profile from old username to new user. 3. Backup the entire registry. 4. Edit the exported .reg file to find and replace old user with new user. 5. Login as the new user. 6. Delete old user 7. Restore the new (edited) .reg
I set up four Dell Computers with Windows 7 Home Premium. Used my administrative account to install software (Microsoft Office Suite), Microsoft Security Essentials, Ccleaner, and Malawarebytes. All programs installed properly. As these computers are going to be used in a public place by junior and senior high school students, I thought it would be best to set up a standard user account for each of the four computers. I have it set up but when I log in as a standard use (non administrative) all the programs that were installed are not available. Tell me if I'm wrong. I think the programs would still be listed in program files when the standard user is open. Can I go to each of the programs and right click to open and then be prompted to key in my administrative password. I would think this should allow the program to be run in the standard user desktop.
I've tried to search this but have had no luck. My wife's computer has XP Pro 64-bit installed and she wants to try (again) to upgrade to Windows 7. I have 2 hard drives for her computer, the one with the XP OS is installed and the other with Windows 7 is waiting to be installed. I only planned on installing one HD at a time, but if I can install both and copy her user files and emails from one HD to the other, that would be an option too. Eventually I want to have just the Windows 7 HD installed and archive the XP HD in the safe.Several months ago she wanted to try Windows 7 but I anticipated that she may want to switch back to XP if she didn't like the new system. I bought a new HD and installed it in her computer, then installed Windows 7 Pro on it. The new system works fine and was updated to a current state as of several months ago. I realize there will be lots of Windows 7 updates to install, and I'm willing to spend the time necessary to do that. However, I'm looking for a short cut for installing all of her personal settings and Outlook email files from XP to Windows 7. I'm thinking that I could copy her entire User file from the XP system and after Win 7 is finally updated and current, paste that User account into Windows 7. MS Office 2003 is already installed on the new HD. I realize it won't be a 100% "one for one" swap and that I may have to tweak several settings from her XP User account, but is using the XP User account even feasible? If I can't paste her XP User account, can I copy her XP Outlook PST file onto a flash drive and then paste that PST file into Windows 7? I don't see why that wouldn't work, but there are a lot of issues that I'm not aware of. Does anyone have any better suggestions on how to import her personal settings and emails into Windows 7 on the new HD? P.S. I didn't realize this was my first post. I've been lurking and reading for quite a while. I live in the Largo, Florida area and have been very active in computers for several years, but just recently upgraded to Windows 7 on my personal computers. I'm getting more comfortable with Windows 7 each day, but now that I've broken the ice with this first post, I hope to become fairly active. I hope that I can eventually contribute to the forum. I'm glad to be here!
how I can run a program, Core Temp.exe, on Windows 7 without having to manually enter the admin password and manually run it after logged in.I tried 3 ways:
1) Run as Admin Went to both the shortcut and the program location -> properties -> "Run as Admin" ---> didn't work Also checked "Run in Compatibility mode for windows 7" ---> didn't work
2) Task Scheduler Use Task Scheduler to run the program at startup---> didn't work run whenever any user logs in---> didn't work run whenever I log in ---> didn't work All of the above triggers at once ---> didn't work
3) Registry Editor Local Machine -> Software -> Microsoft -> Windows -> Current Version -> Run Made a string to run the program ---> didn't work All I want is this program to run whether I'm logged into any account. Specifically, my Limited Account so that I can monitor my CPU temperature and usage. It works after I run the program manually, this pops up "do you want the following program from an unknown publisher....", and enter in my admin password, but this is tiring.
In this tutorial, it's time to take a look at the often unfairly criticized User Account Control security mechanism. User Account Controls (UAC) were introduced in Windows Vista and were immediately unpopular with users migrating from Windows XP. However, they drastically improved security and when used in conjunction with limited user accounts, can actually save a great deal of time, as we'll demonstrate in the video.
I have been experiencing same problem in the link above and on both my laptop and my desktop,,,,both of them have same windows 7 ultimate 64 bitWhen I download any file to the desktop I am not able to see it unless I browse to the path C:UsersjohnDesktop,,,,then I would be able to see that file