Alfa Network Usb Adapter Doesn't Work?

Oct 7, 2010

I have a laptop in which I am running windows 7 pro x64. But as I had a problem with the weak signal I bought an alfa network antenna : 802.11/g long-rangemodel awus036h.I have installed the driver following step by step the instructions from the driver's site.But I am only able to see only the other's SSIDs not MINE and also Even when i am forcing to connect to my SSID it doesn't connect. My network is not Hidden so I dont get it.

View 5 Replies


ADVERTISEMENT

Alfa AWUS036H Wireless Adapter?

Nov 20, 2010

I bought this adapter as a way to stay connected to family back home during this deployment but I am having some issues getting it to work. I installed step for step how the installation cd told me to and I even went online and downloaded the latest driver. I am using Window 7 x64 on this new HP laptop I just bought. The device gets recognized and even shows up in my Device Manager. It says that the driver was installed properly as well but every time I open up the Realtek LAN Utility, it says that the device is disconnected when it is not. It won't even show any available networks for me to connect to. All it says is "Checking Status". The light will blink once when I start up the computer but will not blink at all again after that. The device does work as my room mate who is running Vista verified for me. He was able to just install the driver and connect to the net. I have tried both the 32bit and 64bit drivers. Does anyone have any suggestions that might help me to get this thing working?


View 9 Replies View Related

Free Downloading Of Alfa Wireless USB Adapter

Mar 15, 2012

can i download free alfa wireless ?

View 1 Replies View Related

Free Downloading Of Alfa Wireless USB Adapter?

Oct 11, 2012

How get rtl 8187 driver for win7 64bit

View 1 Replies View Related

Alfa Wireless Adapter Driver Free Download?

Dec 23, 2012

Alfa wireless adapter driver free download?

View 1 Replies View Related

Windows 7 Installed Asus Wi-Fi Adapter, However It Doesn't Work

May 19, 2012

I've installed ASUS Wi-Fi USB adapter (model USB-N13) for LAN. There is Windows 7 Home Premium x64. Through control panel I see that adapter works normally and the drivers are the latest. However my PC doesn't see the adapter - the ASUS utility notices me "ASUS Wireless LAN card is taken apart from your desktop PC".I have the same Wi-Fi adapter at another my PC with Windows 7 Home Basic, and everything works nice. Of course I changed these adapters between my computers. Conclusion is both adapters are working good. The same models, the same drivers. Actually I don't understand where is the mistake?

View 1 Replies View Related

Network Adapter Doesn't Show In Device Manager

Jan 4, 2012

Just reformatted my alienware laptop because I haven't used it in months. Now I don't even see "Network Adapter" listed under device manager so when trying to install the driver i don't think it had any effect. Running m15x windows 7 home premium 64 bit.

View 12 Replies View Related

Network Adapter Works Sometimes And Other Times Doesn't Register

Oct 22, 2012

The Intel(R) 82579LM Gigabit Network adapter works about 40% of the time. The other 60% it says there is a hardware issue and it cannot connect. I then generally fiddle around with the ethernet cable ie unplug it plug it back in move it around again and restart. This sometimes works and I have no problems. Then when I restart my computer its a whole game on whether I can get it working again or not.

I have the latest drivers, and it is not a firewall/security issue.

View 3 Replies View Related

Wireless Network Adapter Will Not Work?

Aug 11, 2011

I just finished building a new PC and installed Windows 7 Home Premium 64 bit today.I have an ASUS Wireless PCI Express Adapter (PCE-N13 802.11 b/g/n). DSL, with a Linksys rounter. Theres just a red X mark on the taskbar and it won't show any open connections =/. I have several wireless devices that work even outside the range which is about maybe 5 meters away from the router. Its pretty much impossible for me to run a wired connection to my PC and need to have a wireless one since theres many tables/couches/chairs inbetween the router and my new PC.

View 4 Replies View Related

Driver For Wireless Network Connection Adapter Does Not Work?

May 22, 2012

When I problem solve it the message is to update and it is the driver for wirless nedwork connector adapter. I have both windows 2007 and 2010 sharing. I can get on the internet by pluging into it and my adress shows as well. Windows 2007 is continually configuring which is getting very old. I tried recovery 3-4 times and it will not recover to a passed date.

View 3 Replies View Related

PC Is Not Accessible / Network Doesn't Work

Jun 5, 2011

I recently changed ISPs, and in the process decided to upgrade my router as I have been wanting a gigabit one.Well everything went fine, set up all my PCs as required (needed to forward a few ports for a few applications).I have two Windows 7 Ultimate x64 PCs, which I have networked together. I am able to login with a remote desktop connection just fine, I am able to access the homegroup section fine too. But the section under "Network" doesn't work. Well it works in that I can see PC1 and PC2, but if I click on the remote PC.I get the error: \PD-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The remote procedure call failed and did not execute.They are on the same router and subnet, and wired if it matters. They are actually the only two things plugged into it, all other PCs use the FiOS provided router.My router is the D-Link DGL4100.No third party firewalls, just the Windows one (and the router one). Prior to the change in routers, everything worked fine.I have searched around the internet, and almost every thread I go to seems to have a different "fix" for this, none have worked for me.

View 4 Replies View Related

Alfa Network 802 11g Driver Download Windows 7?

Nov 6, 2011

Alfa network 802 11g driver download window 7?

View 1 Replies View Related

Alfa Network 802 11g Driver Download Windows 7

Jan 9, 2013

Alfa network 802 11g driver download windows 7

View 1 Replies View Related

Windows 7 Doesn't Work With All Network Drives

Mar 22, 2011

When I boot up my Windows 7 Professional x64 machine I get that balloon that states "Could not reconnect all network drives". How do I get rid of this? I am hard wired into the network (not wireless) and I cannot find a way around it.

All the solutions I have found state its either due to wireless network authentication occuring late in the boot process (but im hard wired) or that you need to upgrade to a Pro edition of windows (which I cam using).

It is not disasterous if I am being honest its just mildly irritating

View 1 Replies View Related

Network Doesn't Work Fine After A Load?

Nov 7, 2012

I have a problem on my iMac 2011 (20go ram) under windows7.Whan I start my computer all is fine. The network is fluid, I can go on the internet, on my server...After loading two 3dsmax sessions, one photoshop sessions and transfert some large files (near 1go) -> my network goes wrong.The browse/save/open/transfert operation on any application takes a loooooooong time to start (maybe 20-30s)

View 3 Replies View Related

Network And Sharing Doesn't Work Properly

Jan 2, 2010

I have a Windows 7 laptop connected via a WRT54G2 wireless router to an XP SP3 desktop. Both the laptop and desktop can see shared resources and both can connected to the internet.

In the Laptop's Network and Sharing Center, however, things are not correct. The Laptop has two connections to the router, lan and wireless. The lan's connection appears OK, but I cannot generate a map. I get "Windows cannot discover any computer or device." The wireless network is public.

I don't know why and I don't know how to change it. Also, when I try to create a new network connection, the laptop sees only a WRT160N router (which I don't have; perhaps I did a while ago, when the laptop ran Vista). No place to add a new one.

I have Cisco's Network Magic and it can correct see everything, including the right router.

View 9 Replies View Related

Atheros Wifi Adapter Doesn't Work With "n" Router

Dec 5, 2011

I have an HP pavillion desktop (s5360f) with Atheros 802.11 a/b/g/n Dualband Wireless Module and D-Link router DIR-615. My numerous Laptops and iPhons / iPads work fine, but this desktop which is further away from the router (in another room, about 20 meters) only shows 1-2 bars of wifi. First I bought a big additional D-Link antenna (7Ghz) but it didn't really help - sometimes connction shows 3 bars. I was told this antenna should help a lot. Then I checked with my router settings and saw that the HP uses "g" connection when everything else uses "n". I even set it to only use "n" but still it shows the HP using "g". I updated the driver (Atheros 9.2.0.113 for AR5B91), but it didn't help. I have "n" enabled in Atheros in Device manager. Now I'm lost and can't think of anything else that can be a problem and / or how to fix it... I don't have any thick walls between the router and the HP, my iPhone seems to work in this room just fine...

View 3 Replies View Related

Disabled Network Adapter, Restarted And Now Not Showing Up In Network And Sharing?

Feb 11, 2012

I disabled my network adapter then restarted and now the adapter is no longer showing up in my network connections. How in the world do I get it back? I have looked at other options (like under the registry which was suggested on a couple of places). I have never seen this happen before. I even reinstalled my drivers and still nothing. How do I enable it again?

View 7 Replies View Related

T41 Doesn't Show Wireless Adapter

Nov 2, 2012

I have a IBM Thinkpad T41, with Windows 7 installed, it has the symbol for wireless LAN on the screen surround but I can't get the device to show up in device manager, I tried installing the drivers as per the instructions, it does have it, how do I get it to operate? it doesn't show up in the adapter settings either

View 2 Replies View Related

Network Adapter Not Shown In Network And Sharing Center

Aug 23, 2009

I have a linksys usb600n (v2) using the Windows 7 driver from linksys. It installs and is displayed correctly in Device Manger - BUT it doesn't appear in the Network and Sharing Center as an adapter. This same device and driver were previously working just fine in this system - but I rebuilt the OS (clean install) after testing a number of security products out.

The initial install went fine - no problems that I remember - just plug in the adapter and install the drivers obtained from Linksys (Ver 3.00.01.0). I tried the same thing on the re-build and it looks fine until I go into the Network Center and can't set up wireless networking since the adapter does not appear.

SIW shows TWO (2) linksys USB adapters under Hardware/Network Adapters, but does not show the network adapters in the Network Information section.

Any ideas?

View 3 Replies View Related

Broadcom 802.11n Network Adapter - Update Lost The Network

Nov 1, 2009

Installed Windows 7 on two home-network computers. Everything appeared to be good, including networking, but I could not access printers (linked through each computer) with the opposite computer. Windows update offered an update for the Broadcom 802.11n network adapter, but when I installed the update I completely lost the network.

I had to revert to the old driver in order to reastablish the network. But the printers still are not recognized. The network adapter on the secondary computer is a Linksys WMP300N. I did try turning the router off for ten seconds with the updated driver but that had no effect.

Anyone had this problem?

View 0 Replies View Related

Computer Doesn't See Wireless Adapter After Sleep

Feb 3, 2012

I just got a new HP desktop, and a wireless router to put into the USB port. It worked perfectly after initial install with the drivers, but after coming back from sleep, it does not see the adapter, and I have to re install the drivers to get it to work. If I shut down the system, then turn it back on, the adapter works perfectly.

View 6 Replies View Related

Netgear Adapter Won't Work

Jul 17, 2009

Just installed windows 7 64 bit.

I'm using a pci wireless adapter chip, Netgear wg311v3 I installed the netgear driver automatically, and then installed the netger smart wizard. However, the smart wizard will not start up. I've done some research, and apparently netgear doesn't make 64bit drivers. I've also tried using the chipset driver which is a Marvell 88w8335. But I may not have used the right driver.

To sum it up:

I have a netgear wg311v3 adapter. Running Windows 7 64bit. It won't run the wizard.

What should I do? Do I need to go back to 32 bit?

View 5 Replies View Related

Wireless Card / Adapter That Will Work With Win 7 ?

Oct 26, 2009

I just had to return my previous windows vista adapter because linksys did not have any drivers for windows 7. What is a good wireless card/adapter that will work with windows 7?

View 4 Replies View Related

Will Apple USB Ethernet Adapter Work On A Non Mac

May 7, 2011

I have a Acer Aspire 5920G with a spoilt ethernet port. I find wireless too unstable ... so I want to use ethernet. I cant find a USB Ethernet Adapter in most hardwarestores in my country but I found Apple USB Ethernet Adapter but will it work on a Non Mac?

View 4 Replies View Related

Wireless Adapter Won't Work On Windows 7

Aug 15, 2011

I recently re-installed Windows 7 to my new SSD. Now my Wireless Adapter wont work. It's a "Netopia 3D Reach (ter/gusb-n1)" adapter (usb). The drivers that i came across all say that this adapter only goes up to vista, which doesnt make sense because it worked perfectly before i reinstalled my OS. What's wrong? If you find any kind of Window 7 driver

View 4 Replies View Related

Netgear WG111 Wireless Adapter Won't Work With W7

Dec 28, 2009

I have read a number of other posts (here and elsewhere) about getting a WG111 to work with Windows 7 on my new computer and haven't had any success. Can someone help by providing click-by-click directions? I'm not a complete novice but clearly not clever enough to follow the directions previously posted. My kids are completely frustrated with having a new machine but being able to get online.

View 3 Replies View Related

Two HP Parallel Printers Fail To Work With Windows 7 Via USB-adapter?

Sep 18, 2010

I can't get my HP LaserJet 4 Plus parallel printer to work via USB to my new laptop with Windows 7 Premium 64 bit. My HP DeskJet 820 Cse doesn't work either.On eBay, I bought a USB to parallel printer cable adapter (Pluscom). Windows says it is working correctly, but nothing happens when connecting one of these two printers.First I tried to print with the LaserJet: nothing. Then the DeskJet: nothing. I'm even unable to edit the properties of the DeskJet: Windows tells me that the print spooler is not working (I don't receive this error message while choosing the LaserJet).A system restore to some days earlier (before I installed the printers) is also failing; Windows tells me this is because of antivirus (Avira free antivirus, up-to-date).

View 3 Replies View Related

Does The 802.11g Wireless WIFI PCI Adapter Card Work With Windows 7

Jan 16, 2012

does the 802.11g Wireless WIFI PCI Adapter Card work with windows 7?

View 4 Replies View Related

Network Location - Set As Home, Work, Or Public Network

Jan 14, 2010

How to Set the Windows 7 Network Location Type ?

View 0 Replies View Related

Fn Key Doesn't Work Anymore

Dec 4, 2012

The other day i had a friend delete some programs from my Asus laptop on startup and running processes to make my computer boot up faster. I think we did something that makes the fn key not work anymore. how to restore this functionality?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved