Netgear Adapter Won't Work

Jul 17, 2009

Just installed windows 7 64 bit.

I'm using a pci wireless adapter chip, Netgear wg311v3 I installed the netgear driver automatically, and then installed the netger smart wizard. However, the smart wizard will not start up. I've done some research, and apparently netgear doesn't make 64bit drivers. I've also tried using the chipset driver which is a Marvell 88w8335. But I may not have used the right driver.

To sum it up:

I have a netgear wg311v3 adapter. Running Windows 7 64bit. It won't run the wizard.

What should I do? Do I need to go back to 32 bit?

View 5 Replies


Netgear WG111 Wireless Adapter Won't Work With W7

Dec 28, 2009

I have read a number of other posts (here and elsewhere) about getting a WG111 to work with Windows 7 on my new computer and haven't had any success. Can someone help by providing click-by-click directions? I'm not a complete novice but clearly not clever enough to follow the directions previously posted. My kids are completely frustrated with having a new machine but being able to get online.

View 3 Replies View Related

NetGear Wireless Adapter Will Not Detect?

Oct 18, 2012

I recently bypassed my previous BSOD issue by simply replacing my HDD with a SSD and doing a fresh install of Windows 7 64bit Pro.

Where the computer is currently located, I need to run wireless internet. To do this, I have used a NetGear wireless adapter "WNDA3100v2". It's a nice adapter, and it's worked fine for about 2 years, including immediately prior to adding my new SSD.

So I fire up my fresh copy of windows, and install my critical software. Once all of that is sorted, I go to install the drivers from the CD. I insert the USB adapter, and click next.

As soon as the adapter is inserted, Windows begins searching for a driver which fails. On the same instant that I click next, the proprietary software for the device says "detecting". This stays this way infinitely it seems, and never detects the device. If I just yank the adapter out, it will say "failed to detect", so this leads me to believe it is at least aware that it's there?

I tried to backdoor it, and ran a wired connection through my window, down the outside of the house, to my router LOL, and forced Windows to search for it's own updated driver. On most occasions, it just says "failed", but I was able to get it to find one last night, and it downloaded to 100% before it just hung up for a while, and then "failed".

View 3 Replies View Related

Netgear Wireless Adapter Not Working (W7 Upgrade)

Dec 28, 2009

I've upgraded my PC to Windows 7 Home Premium today (from Win XP Pro) and now the wireless network adapter does not work.

The adapter is a Netgear WG331 v1. I've tried downloading the drivers from the Netgear site - both those for the v1 and the newer drivers for the v3 and neither have fixed the issue.

I've used the Win 7 troubleshoot feature to install this driver (it is meant to be included within Win 7) but this does not work either.

I've also tried plugging the ethernet cable that normally goes directly into the back of my Netgear router into the PC, in order to provide Win 7 with internet access. However, this has not worked, with the connection apparently not recognised by the computer. I've tried to update the drivers for my PC's motherboard to remedy this, but have been unable to find any that are compatible with this version of Windows. The motherboard is MSI n1996.

Windows 7 troubleshooter shows missing drivers for the following: Multimedia Audio Controller (two of these), PCI Input Device, Ethernet Controller.

What I'm banking on is that an internet connection will enable Win 7 to locate drivers for all of these, but I am currently unable to make this happen. The internet connection is running fine and the wireless router is broadcasting the signal properly (I am accessing it right now via my laptop).

View 1 Replies View Related

Windows 7 Drivers For NetGear WG111v3 Wireless Usb Adapter

Sep 23, 2009

Are there any drivers that work with Windows 7 for this device...

View 3 Replies View Related

NetGear WN121T Wireless Adapter Driver Problem

Dec 10, 2009

I have just built an Intel Core i7 860 windows 7 x64 system,

I am having trouble getting my " Netgear WN121T RangeMax Next Wireless-N Network Adapter " to work.

I have installed driver version which by all acounts should work,, but doesn't.

I went into device manager and went to the properties info for the device and then the hardware tab where it says " Device Status: This device cannot start (Code 10)"

Please can anbody help me find a way to get this wireless adapter to work?

View 3 Replies View Related

Can't Seem To Get Netgear Wg111v2 Wireless Usb To Work

Jun 2, 2010

i can't seem to get my netgear wg111v2 wireless usb to work. I know there are a lot of known problem with this device and windows 7.My problem is that i have configured it correctly i think, but it does not find my network. I'm using windows to find networks and not the netgear program.

View 9 Replies View Related

Can A Netgear Wireless Usb Adapter Signal Read Off Of A Linksys Router Signal

Feb 9, 2012

I just bought a Netgear WNA3100 wireless usb adapter for my HP Win 7 64 bit laptop. I have been trying for 2 and half days to figure out why my speed is slow, why i don't have a good signal, and/ or if I do have a bit of a signal to my luck, why my signal comes and goes. I don't have internet at home at the moment because I am trying to save up to go to school. I am picking up a public business signal from a block away (which I have asked for permission to use), but I only am receiving not much of a signal with the Netgear usb wireless adapter.

View 3 Replies View Related

Cannot Get NEW Netgear N600 Router To Communicate With NEW Netgear WN 3000 RP Extender

Jun 8, 2012

But I cannot get my NEW Netgear N600 router to communicate with a NEW Netgear WN 3000 RP extender.The instructions say to press the WPS button on the extender then the WPS button on the router. No WPS button exists on the router!The instructions also I can use any wireless network manager utility to set this up. Can't find where this is in Windows 7.The I pad has found the NETGEAR_EXT address but won't connect. And the light on the extender does no indicate teh router is communicating with it.

View 3 Replies View Related

Wireless Card / Adapter That Will Work With Win 7 ?

Oct 26, 2009

I just had to return my previous windows vista adapter because linksys did not have any drivers for windows 7. What is a good wireless card/adapter that will work with windows 7?

View 4 Replies View Related

Will Apple USB Ethernet Adapter Work On A Non Mac

May 7, 2011

I have a Acer Aspire 5920G with a spoilt ethernet port. I find wireless too unstable ... so I want to use ethernet. I cant find a USB Ethernet Adapter in most hardwarestores in my country but I found Apple USB Ethernet Adapter but will it work on a Non Mac?

View 4 Replies View Related

Wireless Network Adapter Will Not Work?

Aug 11, 2011

I just finished building a new PC and installed Windows 7 Home Premium 64 bit today.I have an ASUS Wireless PCI Express Adapter (PCE-N13 802.11 b/g/n). DSL, with a Linksys rounter. Theres just a red X mark on the taskbar and it won't show any open connections =/. I have several wireless devices that work even outside the range which is about maybe 5 meters away from the router. Its pretty much impossible for me to run a wired connection to my PC and need to have a wireless one since theres many tables/couches/chairs inbetween the router and my new PC.

View 4 Replies View Related

Wireless Adapter Won't Work On Windows 7

Aug 15, 2011

I recently re-installed Windows 7 to my new SSD. Now my Wireless Adapter wont work. It's a "Netopia 3D Reach (ter/gusb-n1)" adapter (usb). The drivers that i came across all say that this adapter only goes up to vista, which doesnt make sense because it worked perfectly before i reinstalled my OS. What's wrong? If you find any kind of Window 7 driver

View 4 Replies View Related

Alfa Network Usb Adapter Doesn't Work?

Oct 7, 2010

I have a laptop in which I am running windows 7 pro x64. But as I had a problem with the weak signal I bought an alfa network antenna : 802.11/g long-rangemodel awus036h.I have installed the driver following step by step the instructions from the driver's site.But I am only able to see only the other's SSIDs not MINE and also Even when i am forcing to connect to my SSID it doesn't connect. My network is not Hidden so I dont get it.

View 5 Replies View Related

Two HP Parallel Printers Fail To Work With Windows 7 Via USB-adapter?

Sep 18, 2010

I can't get my HP LaserJet 4 Plus parallel printer to work via USB to my new laptop with Windows 7 Premium 64 bit. My HP DeskJet 820 Cse doesn't work either.On eBay, I bought a USB to parallel printer cable adapter (Pluscom). Windows says it is working correctly, but nothing happens when connecting one of these two printers.First I tried to print with the LaserJet: nothing. Then the DeskJet: nothing. I'm even unable to edit the properties of the DeskJet: Windows tells me that the print spooler is not working (I don't receive this error message while choosing the LaserJet).A system restore to some days earlier (before I installed the printers) is also failing; Windows tells me this is because of antivirus (Avira free antivirus, up-to-date).

View 3 Replies View Related

Windows 7 Installed Asus Wi-Fi Adapter, However It Doesn't Work

May 19, 2012

I've installed ASUS Wi-Fi USB adapter (model USB-N13) for LAN. There is Windows 7 Home Premium x64. Through control panel I see that adapter works normally and the drivers are the latest. However my PC doesn't see the adapter - the ASUS utility notices me "ASUS Wireless LAN card is taken apart from your desktop PC".I have the same Wi-Fi adapter at another my PC with Windows 7 Home Basic, and everything works nice. Of course I changed these adapters between my computers. Conclusion is both adapters are working good. The same models, the same drivers. Actually I don't understand where is the mistake?

View 1 Replies View Related

Does The 802.11g Wireless WIFI PCI Adapter Card Work With Windows 7

Jan 16, 2012

does the 802.11g Wireless WIFI PCI Adapter Card work with windows 7?

View 4 Replies View Related

Driver For Wireless Network Connection Adapter Does Not Work?

May 22, 2012

When I problem solve it the message is to update and it is the driver for wirless nedwork connector adapter. I have both windows 2007 and 2010 sharing. I can get on the internet by pluging into it and my adress shows as well. Windows 2007 is continually configuring which is getting very old. I tried recovery 3-4 times and it will not recover to a passed date.

View 3 Replies View Related

Atheros Wifi Adapter Doesn't Work With "n" Router

Dec 5, 2011

I have an HP pavillion desktop (s5360f) with Atheros 802.11 a/b/g/n Dualband Wireless Module and D-Link router DIR-615. My numerous Laptops and iPhons / iPads work fine, but this desktop which is further away from the router (in another room, about 20 meters) only shows 1-2 bars of wifi. First I bought a big additional D-Link antenna (7Ghz) but it didn't really help - sometimes connction shows 3 bars. I was told this antenna should help a lot. Then I checked with my router settings and saw that the HP uses "g" connection when everything else uses "n". I even set it to only use "n" but still it shows the HP using "g". I updated the driver (Atheros for AR5B91), but it didn't help. I have "n" enabled in Atheros in Device manager. Now I'm lost and can't think of anything else that can be a problem and / or how to fix it... I don't have any thick walls between the router and the HP, my iPhone seems to work in this room just fine...

View 3 Replies View Related

Netgear WG311 V3 Won't Run?

Jul 9, 2012

I have 7 Ultimate. I was recently given a NetGear WG311 V3 54/mbs Pci card. Can't seem to find out why it won't work. So many things wrong in my Os atm, but this for now. I tried the Marvell driver. Nope! Absolutely nothing in my Devices and PrintersI installed the Smart Wizard. Again, nope! I tried un-installing and re-installing both. Same as before, nope! The software, when clicked, flashes a small icon in the tray, then, bam. Gone. I now have a signal bar, with a red cross, as if my device was disabled. (Like on a laptop.)

View 7 Replies View Related

Netgear Driver Problems

Jul 8, 2009

It has more of a driver issue than a hardware, but it could be a hardware issue. I desperatley need help, as if I don't get my brother's computer to have internet, I won't be able to use a new laptop I just ordered.

View 7 Replies View Related

New Netgear WG111T Driver (32 And 64)

Aug 20, 2009

I have uploaded a modified Windows 7 x86/x64 driver for the USB Netgear WG111T

Send big files the easy way. Files too large for email attachments? No problem! This is a modification of the drivers for the USB Siemens Gigaset 108, which has the same core Atheros 5523 chipset

It should be compatible with the following operating systems:Windows 7 (x64) - tested this myself, the others are not yet tested Windows 7 (x86) Windows Vista (x64) Windows Vista (x86) Hope this helps everyone!

View 9 Replies View Related

Netgear WG311v3 Issues

Dec 27, 2009

i can not get my netgear WG311v3 54MB wireless pci adapter to work Device manager say the device cannot start (code 10)

so i tried update drivers and windows says i have the most up todate drivers for it. so i uninstalled the driver to try and get windows to reinstall the drivers but it fails any help please. i have looked on the netgear website and they say wwindows should install the drivers automatically, but no.

i have windows 7 64bit 4Gb ram

View 6 Replies View Related

Netgear PS121 Compatibility

Mar 5, 2009

I'm running a Netgear PS121v2 usb print server. It had no issues under XP but within Vista / Windows 7 there was a defect.

The driver for the V2 when installed came up as unsigned, therefore the installation wouldn't proceed any further.

I looked around the net, and a few people had found a workaround with installing the printer manually within Vista.

For me this still didn't work, as when the test page prints, it hangs one line from the end.

The netgear support site stated that the driver for the PS121v2 was compatible with XP through Vista 32 and 64bit.

So I took a chance and did the following:


Download the Drivers for the PS121v1

The difference from what I gather after reading some technical papers is that the firmware in the v2 allows for sharing of the multifunctions of multifunction printers.

The PS121v1 software is signed for Vista and installed no problem.

I first connected the printer (an officejet 4100 series) to the PC and Windows 7 found all the necessary drivers. - impressive as HP's own site says that it doesn't support vista.

I then connected the printer to the PS121 on the router, and installed the PS121v1 drivers.

The drivers configure the existing printer setup to run on the printserver by modifying it's port details and settings.

Prints fine, with no glitches.

View 1 Replies View Related

NetGear 3500 Drivers

Jan 14, 2010

I just purchased a Netgear 3500 Gigabyte router. The NetGear site indicates that their 3500v2 supports Window 7 but I cannot determine when they will support the 3500 I own. Anyone Know? Read a review that my version can be installed MANUALLY. Any COMMENTS? Next driver problem... Neither the NetGear nor the Lynksys wireless adaptors have Windows 7 drivers(dualband, rangemax, gigagyte adaptors).

Any suggestions?

View 4 Replies View Related

Unable To Get Netgear 83 Registered?

Aug 2, 2012

I am trying to register netgear 83 and I am unable to do so.

View 1 Replies View Related

Netgear Router Needs To Be Changed To WEP

Dec 6, 2009

I just installed the Windows 7 upgrade. My printer would not print so I called Dell. I was on the phone with them for 3 hours trying to get it to print. They eventually told me that my wireless router, (Netgear WNR2000) had a wrong IP address of 168. something. They told me I had to change it to a 192. number. They further told me to change to WEP. I went to the wireless site and typed in and logged in. I changed it to WEP but then the internet would not work. I do not know what to do. Can someone please help me?

View 7 Replies View Related

Display Adapter Is Stuck On Standard Vga Adapter

Apr 10, 2012

I know there are several threads but they are with different cards and they didn't solve my issue...

I bought a new MEDION AKOYA P5334E and the system arrived installed normally with Windows 7 home edition.

I've installed on the computer the Windows 7 enterprise edition (x64) and many drivers could not be find. I've installed nost of them, except the display adapter. It's stuck on "standard vga graphic adapter". I have the AMD Radeon HD7570 card but no matter what I try is not working! tried to uninstall the current driver, tried to download the driver from the AMD website (when executing it - it's running but does nothing). when executed the auto detect from AMD website, I got the message "we were unable to find your product or OS"

View 1 Replies View Related

Desktop Does Not Connect To Netgear Modem

Aug 26, 2011

I have Windows 7 64 bit. I bought a Netgear DGN2000 approximately two years ago. It is working well. Currently, there is good connectivity between my laptop and the modem/router (wired and wireless).

I worked on my desktop this morning, uninstalled some programmes, but must have uninstalled a driver or something. I inserted the Resource CD, which installs the modem (although it is installed). Then it stalls at some point. If I troubleshoot, it states Windows do not detect a properly installed network adaptor.

View 1 Replies View Related

WG121 Netgear 64bit Driver

Jul 26, 2009

i have a WG121 Netgear Wireless Adapter 54Mbps, the driver for it works flawlessly on Windows 7 32 Bit, however i am very keen to try out the 64 bit, but when i installed it, the adapter did not work, i was wondering if any of you people know a driver i can use for it on 64 bit. it would be much appreciated as my newly upgraded computer is wasted on a 32 bit operating system.

View 2 Replies View Related

Netgear WG111v2 Beta Driver

Jan 21, 2009

Found this Driver, 32 & 64bit that works with the Netgear wg111v2 wireless adaptor.

View 9 Replies View Related

Copyrights 2005-15, All rights reserved