I have been having trouble with my usb ports not reading my flash drives. I just did a little test and was shocked to find that my usb ports will run printer and not flash drives? I tried to update the drivers but it says they are up to date. What can cause this? It is 5usb ports 2 in back and three across the front. My system is a Dell Studio XPS Desktop 435T/9000 64 bit windows 7.
View 3 Replies
A few days ago I installed a USB 3.0 card (to be precise, this one: 2-Port USB 3.0 SuperSpeed PCI-E Controller Card - Free Shipping - DealExtreme). It uses the very common NEC PD720200 USB 3.0 controller. I installed the required drivers for Windows 7, and the card worked fine for the first day or so. but not since. Whenever I plug in a USB 3.0 external hard drive, I get a false "This device can perform faster..." message, as if I had plugged the drive in a USB 2.0 port.
The external drive I am using is a Western Digital MyBook Essential 1130. It is definitely a USB 3.0 drive, and came with the required USB 3.0 cable. While the USB 3.0 card was working, I got full-speed transfers to the limit of the hard drive's ability, about 90-100 MB/s. Now I can only get USB 2.0 speeds (33-34 MB/s). Windows insists I have the drive plugged into a USB 2.0 port even though it is plugged directly into the USB 3.0 card.
Things I tried so far: -rebooting and complete power cycle. No difference. -plugging the drive into one port or the other. Also no difference. -Looked in Device manager.The controller is recognized as a USB 3.0 device is using the proper NEC drivers.
Other info that may be important:
-No overclocking settings in use.
-I made sure the cable was plugged in all the way. It's in as far as it can go, but the ports will still only act like USB 2.0 ports.
I might as well throw the card away if it is only going to act as a USB 2.0 device.
So I installed some weird file and it like disabled ALL of my USB ports, hwo can I get them to work again?! Both my keyboard and mouse are USB and I don't have any regular ones, any way I can fix this through my 2nd partition using WinXP? im using the Win XP partition to ask this right now, my Win7 partition seems to run fine like when it happened I thought it froze but it didn't because the wifi signal went off from my USB wireless adapter and my mouse+keyboard adapter both light off as well as my DVC 80 capture device. The file I ran was 'libusb-win32-filter-bin-0.1.12.2.exe' from a package I downloaded in a zip called 'iHackintosh iRecovery Package for Windows & Mac' and I REALLY DONT want to restart my computer
View 1 Replies View RelatedWhen i try to connect my wireless mouse to my laptop it dosnt respond at all. It says it is connected, however nothing works. Ive tried using a Flashdrive and it works fine. Ive also tried with 3 different mice with the same result. Im guessing it has to do with a driver i have recently downloaded from windows update, however, i have restored my computer as far back as i can go, and it still dosnt work.
View 2 Replies View RelatedInstalled Windows 7--->USB ports do not work.
1. Tried uninstalling/reinstalling them...no good
2. Tried downloading from Intels website--->Got error message saying my computer does not meet minimum specs for program to run, which is BS because my computer is very good and is only 1 year old.
I'm not sure if any other specs needed to solve this problem.
I upgraded from vista 32bit to windows seven 32bit a few days ago, ever sense i have upgraded i have never been able to use any usb ports. i have went into the device manager and uninstalled and reinstalled the usb port drivers, they will start to work for about 30 seconds then will fail.
This is the error in the properties under usb port:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
I have installed my motherboards new drivers and bios for windows 7. also have updated windows and installed all major updates. I have been working on fixing this error for days now and i have had no success.
USB 2.0 ports don't work after upgrade from xp to win 7.
View 7 Replies View RelatedNot sure what is going on, but 75% of the time when a user logs into any of our machines that have Windows 7 the ports disappear and they can't print. The spooler is running. If I restart it, it seems to fix it, or reboot sometimes it will fix it. I have been fighting this for over 2 months and can't figure it out. I have loaded the latest drivers I can get for the printers. I also turned off the Print services under Windows features. I adjusted the Print and Point info in gpedit.msc. What else am I missing here? This is causing major issues at my work that people are starting to get frustrated. There has to be a fix for this.
View 9 Replies View RelatedI was away on a trip, so I let my parents use my laptop while I was gone. They say it updated, something, but afterwards froze, so they turned it off. Turns out it was several different updates, including a BIOS update. Everything else works fine except for my usb ports which no longer detect anything connected to them. The device manager gives me little yellow warning bubbles by Standard Enhanced PCI to USB Host Controller and Standard OpenHCD USB Host Controller. It says code 19 error and the config info in the registry is missing or damaged. I have tried updating the drivers, uninstalling and letting it re-install, but it hasn't worked. I'm running on a HP Pavilion dv6-3013cl Entertainment notebook, Windows 7 (64bit).
View 14 Replies View RelatedI Seem to be having trouble forwarding my ports, My router model is a D-Link DIR-615. (If needed by PC Specs are down below) When I go into my router and i forward the ports, the forwarding doesn't work, Here is what I know:
- Computer IP Is the correct IP that the port is being forwarded too
- Windows Firewall is Off
- Restarting the Router/Computer Multiple Times
- The router says the ports are forwarded
- I have forwarded the ports to a laptop of mine and that seemed to work
- I tested the ports on this site Open Port Check Tool - Test Port Forwarding on Your Router
- That site told me that the forwarding to my laptop worked, but not to my desktop
I was rebuilding my computer bit by bit after my old one died on me. I recently purchased a motherboard/cpu and I used an old harddrive with windows xp on it and my old video card from my previous pc.Everything worked fine, all usb ports were up and running, monitor worked great. Than I went to install Windows 7 on my computer from a usb thumb-drive. Everything went smoothly until I got the the first restart. When the computer turned on again, all fans were turning, hard drive was spinning, and led lights turned on but my monitor went black saying no connection, and none of my usb ports work (no lights on my keyboard or mouse).
My computer specs are:
Motherboard: AsRock 970 Extreme3
CPU: AMD-FX 4100
Graphic Card: Zotac GeForce 9500GT
Ram: 2, 4GB (8GB total) Corsair Vengeance DDR3
HDD: Seagate Barracuda 7200.7
Monitor: Asus VH198T
My problem began when someday i had issue in my windows which was usb was not recognized as i tried putting 3 usbs but all of them didn't work and i have 2 usb ports in my laptop which is dell xps 15z so i don't think it is a hardware issue
My problem continued and i searched and searched the internet for solutions but no one really worked so i decided to format the windows and installing new clean windows 7 one, and i did so and after installation i had too many more problems knowing that i installed all the required drivers needed for the laptop and checked them with driver genius, now any usb i plug in isn't even sensed by the lap or self installed like the usb ports have no drivers or anything.I tried the wireless mouse which isn't sensed on another laptop and it installed and worked instantly, so where is driver software installation which should install the mouse automatic?
It seems all the usb ports do not work on my laptop. My usb mouse doesn't work, and my other usb devices do not work either. All the usb drivers are installed properly as detected.
View 2 Replies View RelatedUSB Ports won't auto detect/install my Printer on windows 7
View 1 Replies View RelatedI'm about to just reinstall Windows. Recently the sound on anything that uses flash in any browser is constant skipping/popping. The video timer moves as usual too. Any games, movies, etc. work just fine. I have tried about 5 different flash versions now and none of them work. I have tried to reinstall browsers too without luck. [code]
View 8 Replies View RelatedMy USB flash drive doesnt work anymore?
View 3 Replies View RelatedI have installed Windows 7 (32 bit)and Internet explorer 9. Adobe Flash player does not work?
View 2 Replies View RelatedMy Adobe Flash Player doesn't work, everytime I go to a video on the internet, a box with a circle, triangle and square comes up in the corner, when I install it and open IE, my dad's favourites and stuff shows up, but when I close it and open it again, it goes back to mine and IE doesn't work again,
View 1 Replies View Relatedi keep downloading adobe flash player. but it still dosnt say that i have it downloaded! i keep going on Internet and it says to download the latest updated adobe, which i do, yet its not working. what is going on? i have windows 7. i have safari and explorer, if either o
View 8 Replies View RelatedI have some perfectly good USB flash-card readers from Transcend. They work just great on my XP office machine, and on my home machine if I dig out my XP boot drive and boot XP. But Win7 can't use flash in this device. Disk Management shows the correct size but can't show Properties; no drive letter is assigned, and I can't see the drives. They all work just find under XP.
I hesitate to go buy another brand of reader; USB is supposed to be plug-and-play.
I have a problem with my printer, my printer stops working frequently. printer continues to work only after the "printer spool service" restarted manually
View 2 Replies View RelatedI have three flash drives, one a 1gb HP flash drive, one a 2gb Sandisk Cruzer, and one a 16gb Patriot XTWhen the HP 1gb drive and Sandisk 2gb are plugged in during boot, nothing happens. It POSTs fine and starts windows.When the Patriot drive is plugged in during boot, the BIOS hangs 2/3rds of the way through POST.I have tried multiple formatting schemes. Also note that there is absolutely nothing on any of these drives, they are empty and freshly formatted.1gb formatted to FAT works, FAT32 works, exFAT works, all regardless of allocation size.2gb formatted to FAT works, FAT32 works, exFAT works, all regardless of allocation size.16gb formatted to FAT32 fails, exFAT fails, regardless of allocation size. have tried a full (non-quick) format to check for bad sectors, to no avail I have tried HP format tool rather than windows format tool, to no avail.So at this point I'm thinking it's the Dell BIOS at fault here, and I'm going to have to dualboot instead of making a multiboot drive.
View 5 Replies View RelatedI am having trouble with getting the flash-player 10.2 to work properly. The video keeps pausing..
View 1 Replies View RelatedAll of my Removable Storage Devices (Flash drives, External HDD) do not work with my Windows 7. When I connect them, I hear the beeps but the device sometimes show up, sometimes not and sometimes they appear after a long interval. On accessing them, Windows tell me that I need to format the drive. Well, I can't do that. It's happening with all of my removable devices, not just one. They work fine with my laptop which is Windows 7 too,
View 1 Replies View RelatedThe printer works fine after the PC is rebooted or just turned on, but as soon as it returns from sleep I cannot print to the USB printer. I have the port set to "do not turn this device off" but none of those power settings for the USB hubs seem to work.
I had to use the Troubleshooter to allow the USB mouse/Keyboard to reinitialize after sleep, but the troubleshooter does not apply the same fix for the USP printer. Is there some way to do this manually?
I know MS is trying to remove options and configurations for the average PC user, but I've been working in IT for years now and there are a bunch of things that I would at least have the option of turning on/off but some features don't exist in Windows 7 (like UP button in My Computer).
Anyone have an idea how to make the printer work from sleep without having to unplug and re-plug the USB cord in? It's a PITA.
i think i changed the program in compatibilty to the wrong 1
View 2 Replies View RelatedMy HP printer 5610series does not work with Windows 7.
View 1 Replies View RelatedI just purchased the Kodak ESP C310 wireless printer. I have a Toshiba laptop Windows 7. and I cannot get the disk to printer to download and cannot get any connectivity to printer.
View 3 Replies View RelatedI cant get my hp printer to work with windows 7. Hp said it will work in limited mode but after installing software still didnt work
View 3 Replies View RelatedI installed a rosewill RC-302 parallel port card to support my trusty HPPCS 500. I installed the correct printer driver but all I get is an error when I try a test page.
I downloaded the parallel card driver but not sure it installed. I read that win7 would auto detect it but neither ever displayed even after powering off and on.
Any ideas?
I've recently updated from windows xp to windows 7 professional.I cannot get the cd print facility on the printer to work.epson are not able to provide a solution apart from buying a new printer.
View 4 Replies View Related
