Installed Windows 7--->USB ports do not work.
1. Tried uninstalling/reinstalling them...no good
2. Tried downloading from Intels website--->Got error message saying my computer does not meet minimum specs for program to run, which is BS because my computer is very good and is only 1 year old.
I was away on a trip, so I let my parents use my laptop while I was gone. They say it updated, something, but afterwards froze, so they turned it off. Turns out it was several different updates, including a BIOS update. Everything else works fine except for my usb ports which no longer detect anything connected to them. The device manager gives me little yellow warning bubbles by Standard Enhanced PCI to USB Host Controller and Standard OpenHCD USB Host Controller. It says code 19 error and the config info in the registry is missing or damaged. I have tried updating the drivers, uninstalling and letting it re-install, but it hasn't worked. I'm running on a HP Pavilion dv6-3013cl Entertainment notebook, Windows 7 (64bit).
View 14 Replies View RelatedUSB 2.0 ports don't work after upgrade from xp to win 7.
View 7 Replies View RelatedI was rebuilding my computer bit by bit after my old one died on me. I recently purchased a motherboard/cpu and I used an old harddrive with windows xp on it and my old video card from my previous pc.Everything worked fine, all usb ports were up and running, monitor worked great. Than I went to install Windows 7 on my computer from a usb thumb-drive. Everything went smoothly until I got the the first restart. When the computer turned on again, all fans were turning, hard drive was spinning, and led lights turned on but my monitor went black saying no connection, and none of my usb ports work (no lights on my keyboard or mouse).
My computer specs are:
Motherboard: AsRock 970 Extreme3
CPU: AMD-FX 4100
Graphic Card: Zotac GeForce 9500GT
Ram: 2, 4GB (8GB total) Corsair Vengeance DDR3
HDD: Seagate Barracuda 7200.7
Monitor: Asus VH198T
A few days ago I installed a USB 3.0 card (to be precise, this one: 2-Port USB 3.0 SuperSpeed PCI-E Controller Card - Free Shipping - DealExtreme). It uses the very common NEC PD720200 USB 3.0 controller. I installed the required drivers for Windows 7, and the card worked fine for the first day or so. but not since. Whenever I plug in a USB 3.0 external hard drive, I get a false "This device can perform faster..." message, as if I had plugged the drive in a USB 2.0 port.
The external drive I am using is a Western Digital MyBook Essential 1130. It is definitely a USB 3.0 drive, and came with the required USB 3.0 cable. While the USB 3.0 card was working, I got full-speed transfers to the limit of the hard drive's ability, about 90-100 MB/s. Now I can only get USB 2.0 speeds (33-34 MB/s). Windows insists I have the drive plugged into a USB 2.0 port even though it is plugged directly into the USB 3.0 card.
Things I tried so far: -rebooting and complete power cycle. No difference. -plugging the drive into one port or the other. Also no difference. -Looked in Device manager.The controller is recognized as a USB 3.0 device is using the proper NEC drivers.
Other info that may be important:
-No overclocking settings in use.
-I made sure the cable was plugged in all the way. It's in as far as it can go, but the ports will still only act like USB 2.0 ports.
I might as well throw the card away if it is only going to act as a USB 2.0 device.
So I installed some weird file and it like disabled ALL of my USB ports, hwo can I get them to work again?! Both my keyboard and mouse are USB and I don't have any regular ones, any way I can fix this through my 2nd partition using WinXP? im using the Win XP partition to ask this right now, my Win7 partition seems to run fine like when it happened I thought it froze but it didn't because the wifi signal went off from my USB wireless adapter and my mouse+keyboard adapter both light off as well as my DVC 80 capture device. The file I ran was 'libusb-win32-filter-bin-0.1.12.2.exe' from a package I downloaded in a zip called 'iHackintosh iRecovery Package for Windows & Mac' and I REALLY DONT want to restart my computer
View 1 Replies View RelatedWhen i try to connect my wireless mouse to my laptop it dosnt respond at all. It says it is connected, however nothing works. Ive tried using a Flashdrive and it works fine. Ive also tried with 3 different mice with the same result. Im guessing it has to do with a driver i have recently downloaded from windows update, however, i have restored my computer as far back as i can go, and it still dosnt work.
View 2 Replies View RelatedI'm not sure if any other specs needed to solve this problem.
I upgraded from vista 32bit to windows seven 32bit a few days ago, ever sense i have upgraded i have never been able to use any usb ports. i have went into the device manager and uninstalled and reinstalled the usb port drivers, they will start to work for about 30 seconds then will fail.
This is the error in the properties under usb port:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
I have installed my motherboards new drivers and bios for windows 7. also have updated windows and installed all major updates. I have been working on fixing this error for days now and i have had no success.
I have been having trouble with my usb ports not reading my flash drives. I just did a little test and was shocked to find that my usb ports will run printer and not flash drives? I tried to update the drivers but it says they are up to date. What can cause this? It is 5usb ports 2 in back and three across the front. My system is a Dell Studio XPS Desktop 435T/9000 64 bit windows 7.
View 3 Replies View RelatedLeft my computer running Win 7 home premium on overnight, had just installed a fresh copy of windows. I saw a message saying the system was restarted because of windows updates. Now, none of my USB 2.0 ports work, neither the rear ports nor usb mobo headers work. The two usb 3.0 ports do work however. Those 2.0 ports were working fine previously. Never seen update do this before.
View 2 Replies View Relatedlast night after applying a windows update none of my usb ports work. I have four onboard total. After installing the hotfix last night, two of them worked. After a reboot this morning im back to square one. Now last night before i got it briefly working, whatever i plugged in would charge but not be recognized by windows. Now i get nothing. no charge, no recognition.
View 3 Replies View RelatedI Seem to be having trouble forwarding my ports, My router model is a D-Link DIR-615. (If needed by PC Specs are down below) When I go into my router and i forward the ports, the forwarding doesn't work, Here is what I know:
- Computer IP Is the correct IP that the port is being forwarded too
- Windows Firewall is Off
- Restarting the Router/Computer Multiple Times
- The router says the ports are forwarded
- I have forwarded the ports to a laptop of mine and that seemed to work
- I tested the ports on this site Open Port Check Tool - Test Port Forwarding on Your Router
- That site told me that the forwarding to my laptop worked, but not to my desktop
No drivers listed by dell for 7 Vista drivers
View 3 Replies View RelatedMy problem began when someday i had issue in my windows which was usb was not recognized as i tried putting 3 usbs but all of them didn't work and i have 2 usb ports in my laptop which is dell xps 15z so i don't think it is a hardware issue
My problem continued and i searched and searched the internet for solutions but no one really worked so i decided to format the windows and installing new clean windows 7 one, and i did so and after installation i had too many more problems knowing that i installed all the required drivers needed for the laptop and checked them with driver genius, now any usb i plug in isn't even sensed by the lap or self installed like the usb ports have no drivers or anything.I tried the wireless mouse which isn't sensed on another laptop and it installed and worked instantly, so where is driver software installation which should install the mouse automatic?
It seems all the usb ports do not work on my laptop. My usb mouse doesn't work, and my other usb devices do not work either. All the usb drivers are installed properly as detected.
View 2 Replies View RelatedThey worked fine the 1st day, then my computer went to sleep for the night and none of them worked on day 2. Took a snipet of the devices page. Any ideas?
View 9 Replies View RelatedI'm out of ideas. I've been running Win 7 on this machine for more than a year without issues in updating etc. Now it will not search or update/install critical items. I'm running Symantec (even tried turning the firewall off without any success). I get an error code 80072F7C. When I run hijackthis, I get an error message that my system denied write access to the Hosts file. I proceed with the scan but am unable to produce a log file. I've included a screenshot from the windows update error as well as the error I get when trying to run hijack this.
View 1 Replies View RelatedI have recently downloaded Windows 7 - 32 bit onto a new discrete (i.e. Physically separate) HDD. In the installation process it had severe problems with USB and PCIe drivers. That is they don't work and there were! marks in Device Manager. I was lucky in having access to an old PS2 kybd which allowed me some access to the new os. Luckily, since I was booting off of a Windows XP Home Edition on a separate HDD I managed to use its drivers which worked on the Windows 7 and allowed me to get my USB kyybd and mouse working again. It also automatically down loaded the other drivers for my devices like the USB dongle for wireless internet access.
This is a long preamble to my actual problem and the reason for this message. I have not had as much success when I tried the same exercise; this time with Windows 7 - 64 bit installation. The 64 bit was installed on a separate partition on the same physical drive as the 32 bit version. The 32 bit drivers from Win 7 - 32 bit and XP don't work. I thought the 32 bit drivers for such basic things as USB pointing devices would work in the 64 bit version; but clearly not. Also, clearly my installation disk is negligent in not loading the drivers in either installation. Where can I go to get these basic drivers.
I have tried Logitech with no luck as my kybd/mouse combo doesn't even show up on their site. I have tried going to Microsoft site to get generic 64 bit drivers but they are not being very kind in that regard. There is nothing to download. Clearly they don't want to give anything away free! My Logitech USB kybd/mouse combo is model Y-RK56A for the kybd and M-RR95 for the mouse. My mobo is a Gigabyte GA-880GA-UD3H and I have its CD but w/o mouse I can't get it to install on the Win 7-64 partition. I thought when it installed on my XP partition it would have installed both sets of drivers. Can I extract just the 64 bit USB drivers from there?
USB Ports won't auto detect/install my Printer on windows 7
View 1 Replies View RelatedI just turned on my HP G60-t (Windows 7 Premium) laptop (after being out of use for about 3 months) and when i try clicking "check for updates" i get an error message:"Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer" - after 2 restarts it still wont work.
View 2 Replies View RelatedMy windoes update on my Windows 7 64 Bit laptop will not work. I've tried starting it from the program in start but I get the error. When I go onto update.microsoft.com it tell me to update via Windows Update in start as well. I cannot check for updates.Most recent check: 11/28/10MOst recent update: 11/24/10Last update : Update for Internet Explorer 8 Compatibility View List for Windows 7 for x64-based Systems (KB2447568)This Compatibility View List update helps make Web sites that are designed for older browsers look better in Internet Explorer 8. When users install Internet Explorer 8, they will be given a choice about opting-in to a list of sites that should be displayed in Compatibility View
View 4 Replies View RelatedI have been trying to perform these updates for a month or 2 now but I always get the same errors. I get Error Codes 80073701 and 800F081E (see attached)
Clicking on "get help with this error" is useless, as you'd expect from Microsoft. According to Microsoft these are "important updates".
All other updates install correctly. I dont really care too much for IE9, but I figure Windows 7 SP1 (for 64 bit machine) might have some importance for security.!
I have tried all possible solutions suggested to get the Play Ready to update but they all fail..I am not able to see any satellite or DVT channels for the moment.
View 2 Replies View RelatedIn Windows XP, if you try to update a driver and the OS can't find all of the driver files it will tell you which file is missing, and then give you the option to select the folder the file might be in.In Windows 7, if you try to update a driver and the OS can't find all of the driver files it halts with the message "The system cannot find the file specified" and the only option you get is to close the window.I was wondering if there is any to make Windows 7 work more like Windows XP in this regard. Perhaps a registry hack or some sort of modification? Basically I am looking for a way to make Windows 7 look for missing driver files instead of just giving up.
- How it looks in Windows XP
I recently had a few bad viruses on my computer (some trojan and google redirect virus). I think I got rid of them, but I deleted a lot of stuff maybe I should not have in the process. Windows update no longer works. For a while, I was not even able to scan for updates, then I ran the fix it from the microsoft website and that let me scan, but when I try to install, I get this error message: Code 80246008 Windows Update encountered an unknown error. When I click on the link to get help with this error, it can't find any information on it.Anyways, when I go into control panel > administrative tools > services, Windows Update is not even in the list. How do I get it back? Do I have to reinstall windows?
Edit: I should also note I just tried to install the latest virus definitions for microsoft security essentials and I got error code 0x80240022. Says there may be a missing system file, an incorrect system setting, or a problem with a registry file.
After updating with KB2507938, his USB wireless mouse and keyboard stop working. Apparently his regular, wired keyboard works. Doing a System Restore fixes the problem, but after turning the computer off and then on, etc., the update reapplies itself.
View 14 Replies View Relatedi have a samsung np550p5c i kept getting popups of samsung updates and it did my head in so i updated them. they were about 7 updates and the ones i could remember were a bios, sound and graphics update.
when the updates were done it prompted me to restart which i did. when my laptop rebooted i got an error (ill post up a pic of it in a bit) now when i tried to change my brightness using the function keys they dont work
i have a samsung np550p5c i kept getting popups of samsung updates and it did my head in so i updated them. they were about 7 updates and the ones i could remember were a bios, sound and graphics update. when the updates were done it prompted me to restart which i did. when my laptop rebooted i got an error (ill post up a pic of it in a bit)
View 1 Replies View RelatedThe problem appeared in two different laptops (Lenovo and Fujitsu). The bluetooth hardware is not visible in device manager anymore, but unrecognized device appeared. Driver reinstall doesn't help. Driver installation setup says there is no bluetooth hardware. PC Suite is installed , worked fine before.
View 1 Replies View RelatedThis may be difficult to troubleshoot because I have very few details about the computer in question. A friend called me because I am fairly good with basic computer problems. I'm not sure of the hardware specs, but it's a 2010 or 2011 model PC with Windows 7 installed. They did a Windows Update, and let it update just fine - they did not restart or shut down at all during the update. Once the update completed however, they can't open anything up.
Every time they try opening a program, they get an error message. Also, he mentioned that at first after the update, it wouldn't even boot up. He would get a message saying that he needs to restore to system defaults. Somehow, they got the computer to boot but it wont open any programs. How do you reset a Windows 7 computer to factory settings?
Ever since I removed some malware I cannot run a program that is vital to my job. It tries to do a software update (which it does periodically) and encounters this error: "Message 0x1047 in SUBVMCHK Another application is in the process of updating. Please wait while this update completes." I click ok and the program shuts down. I cannot uninstall the program (I get error 1060). Is there a registry key missing? Earliest system restore does not work.
View 3 Replies View Related