Monitor/USB Ports Don't Work After Windows 7 Install
Aug 5, 2012
I was rebuilding my computer bit by bit after my old one died on me. I recently purchased a motherboard/cpu and I used an old harddrive with windows xp on it and my old video card from my previous pc.Everything worked fine, all usb ports were up and running, monitor worked great. Than I went to install Windows 7 on my computer from a usb thumb-drive. Everything went smoothly until I got the the first restart. When the computer turned on again, all fans were turning, hard drive was spinning, and led lights turned on but my monitor went black saying no connection, and none of my usb ports work (no lights on my keyboard or mouse).
My computer specs are:
Motherboard: AsRock 970 Extreme3
CPU: AMD-FX 4100
Graphic Card: Zotac GeForce 9500GT
Ram: 2, 4GB (8GB total) Corsair Vengeance DDR3
HDD: Seagate Barracuda 7200.7
Monitor: Asus VH198T
View 2 Replies
ADVERTISEMENT
Oct 25, 2011
USB 2.0 ports don't work after upgrade from xp to win 7.
View 7 Replies
View Related
Oct 31, 2009
Installed Windows 7--->USB ports do not work.
1. Tried uninstalling/reinstalling them...no good
2. Tried downloading from Intels website--->Got error message saying my computer does not meet minimum specs for program to run, which is BS because my computer is very good and is only 1 year old.
View 0 Replies
View Related
Aug 9, 2011
A few days ago I installed a USB 3.0 card (to be precise, this one: 2-Port USB 3.0 SuperSpeed PCI-E Controller Card - Free Shipping - DealExtreme). It uses the very common NEC PD720200 USB 3.0 controller. I installed the required drivers for Windows 7, and the card worked fine for the first day or so. but not since. Whenever I plug in a USB 3.0 external hard drive, I get a false "This device can perform faster..." message, as if I had plugged the drive in a USB 2.0 port.
The external drive I am using is a Western Digital MyBook Essential 1130. It is definitely a USB 3.0 drive, and came with the required USB 3.0 cable. While the USB 3.0 card was working, I got full-speed transfers to the limit of the hard drive's ability, about 90-100 MB/s. Now I can only get USB 2.0 speeds (33-34 MB/s). Windows insists I have the drive plugged into a USB 2.0 port even though it is plugged directly into the USB 3.0 card.
Things I tried so far: -rebooting and complete power cycle. No difference. -plugging the drive into one port or the other. Also no difference. -Looked in Device manager.The controller is recognized as a USB 3.0 device is using the proper NEC drivers.
Other info that may be important:
-No overclocking settings in use.
-I made sure the cable was plugged in all the way. It's in as far as it can go, but the ports will still only act like USB 2.0 ports.
I might as well throw the card away if it is only going to act as a USB 2.0 device.
View 4 Replies
View Related
Oct 19, 2012
My problem began when someday i had issue in my windows which was usb was not recognized as i tried putting 3 usbs but all of them didn't work and i have 2 usb ports in my laptop which is dell xps 15z so i don't think it is a hardware issue
My problem continued and i searched and searched the internet for solutions but no one really worked so i decided to format the windows and installing new clean windows 7 one, and i did so and after installation i had too many more problems knowing that i installed all the required drivers needed for the laptop and checked them with driver genius, now any usb i plug in isn't even sensed by the lap or self installed like the usb ports have no drivers or anything.I tried the wireless mouse which isn't sensed on another laptop and it installed and worked instantly, so where is driver software installation which should install the mouse automatic?
View 2 Replies
View Related
Sep 28, 2011
So I installed some weird file and it like disabled ALL of my USB ports, hwo can I get them to work again?! Both my keyboard and mouse are USB and I don't have any regular ones, any way I can fix this through my 2nd partition using WinXP? im using the Win XP partition to ask this right now, my Win7 partition seems to run fine like when it happened I thought it froze but it didn't because the wifi signal went off from my USB wireless adapter and my mouse+keyboard adapter both light off as well as my DVC 80 capture device. The file I ran was 'libusb-win32-filter-bin-0.1.12.2.exe' from a package I downloaded in a zip called 'iHackintosh iRecovery Package for Windows & Mac' and I REALLY DONT want to restart my computer
View 1 Replies
View Related
Apr 26, 2011
When i try to connect my wireless mouse to my laptop it dosnt respond at all. It says it is connected, however nothing works. Ive tried using a Flashdrive and it works fine. Ive also tried with 3 different mice with the same result. Im guessing it has to do with a driver i have recently downloaded from windows update, however, i have restored my computer as far back as i can go, and it still dosnt work.
View 2 Replies
View Related
Nov 10, 2009
I'm not sure if any other specs needed to solve this problem.
I upgraded from vista 32bit to windows seven 32bit a few days ago, ever sense i have upgraded i have never been able to use any usb ports. i have went into the device manager and uninstalled and reinstalled the usb port drivers, they will start to work for about 30 seconds then will fail.
This is the error in the properties under usb port:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
I have installed my motherboards new drivers and bios for windows 7. also have updated windows and installed all major updates. I have been working on fixing this error for days now and i have had no success.
View 3 Replies
View Related
Nov 9, 2012
I have been having trouble with my usb ports not reading my flash drives. I just did a little test and was shocked to find that my usb ports will run printer and not flash drives? I tried to update the drivers but it says they are up to date. What can cause this? It is 5usb ports 2 in back and three across the front. My system is a Dell Studio XPS Desktop 435T/9000 64 bit windows 7.
View 3 Replies
View Related
Jan 23, 2011
I was away on a trip, so I let my parents use my laptop while I was gone. They say it updated, something, but afterwards froze, so they turned it off. Turns out it was several different updates, including a BIOS update. Everything else works fine except for my usb ports which no longer detect anything connected to them. The device manager gives me little yellow warning bubbles by Standard Enhanced PCI to USB Host Controller and Standard OpenHCD USB Host Controller. It says code 19 error and the config info in the registry is missing or damaged. I have tried updating the drivers, uninstalling and letting it re-install, but it hasn't worked. I'm running on a HP Pavilion dv6-3013cl Entertainment notebook, Windows 7 (64bit).
View 14 Replies
View Related
Oct 23, 2012
I Seem to be having trouble forwarding my ports, My router model is a D-Link DIR-615. (If needed by PC Specs are down below) When I go into my router and i forward the ports, the forwarding doesn't work, Here is what I know:
- Computer IP Is the correct IP that the port is being forwarded too
- Windows Firewall is Off
- Restarting the Router/Computer Multiple Times
- The router says the ports are forwarded
- I have forwarded the ports to a laptop of mine and that seemed to work
- I tested the ports on this site Open Port Check Tool - Test Port Forwarding on Your Router
- That site told me that the forwarding to my laptop worked, but not to my desktop
View 9 Replies
View Related
Nov 26, 2012
It seems all the usb ports do not work on my laptop. My usb mouse doesn't work, and my other usb devices do not work either. All the usb drivers are installed properly as detected.
View 2 Replies
View Related
Apr 1, 2012
I have recently downloaded Windows 7 - 32 bit onto a new discrete (i.e. Physically separate) HDD. In the installation process it had severe problems with USB and PCIe drivers. That is they don't work and there were! marks in Device Manager. I was lucky in having access to an old PS2 kybd which allowed me some access to the new os. Luckily, since I was booting off of a Windows XP Home Edition on a separate HDD I managed to use its drivers which worked on the Windows 7 and allowed me to get my USB kyybd and mouse working again. It also automatically down loaded the other drivers for my devices like the USB dongle for wireless internet access.
This is a long preamble to my actual problem and the reason for this message. I have not had as much success when I tried the same exercise; this time with Windows 7 - 64 bit installation. The 64 bit was installed on a separate partition on the same physical drive as the 32 bit version. The 32 bit drivers from Win 7 - 32 bit and XP don't work. I thought the 32 bit drivers for such basic things as USB pointing devices would work in the 64 bit version; but clearly not. Also, clearly my installation disk is negligent in not loading the drivers in either installation. Where can I go to get these basic drivers.
I have tried Logitech with no luck as my kybd/mouse combo doesn't even show up on their site. I have tried going to Microsoft site to get generic 64 bit drivers but they are not being very kind in that regard. There is nothing to download. Clearly they don't want to give anything away free! My Logitech USB kybd/mouse combo is model Y-RK56A for the kybd and M-RR95 for the mouse. My mobo is a Gigabyte GA-880GA-UD3H and I have its CD but w/o mouse I can't get it to install on the Win 7-64 partition. I thought when it installed on my XP partition it would have installed both sets of drivers. Can I extract just the 64 bit USB drivers from there?
View 7 Replies
View Related
Feb 4, 2013
USB Ports won't auto detect/install my Printer on windows 7
View 1 Replies
View Related
Feb 18, 2011
I have a pc running windows 7 pro 64 bit, I received a update from windows and when the computer rebooted my monitor and key board will not work. I don't know what to do now, I can't even get it to boot in safe mode.
View 3 Replies
View Related
Jan 24, 2013
I have a Lenovo u400 laptop and im trying to connect my external samsung syncmaster bx2335 to it through an hdmi/dvi adapter.When it first boots up, the monitor works displaying the lenovo logo but when it gets past the windows logo and onto the log in screen, it switches back to the laptop and the monitor wont respond anymore.I have uninstalled the video drivers and that make the monitor work when windows was on, but once i tried to reinstall the drivers the problem came back.
View 8 Replies
View Related
Oct 29, 2009
They worked fine the 1st day, then my computer went to sleep for the night and none of them worked on day 2. Took a snipet of the devices page. Any ideas?
View 9 Replies
View Related
Sep 18, 2011
when I made a boot defragmentation of C:/, after 5 minutes my monitor showed up "no video imput" and got in stand-by. This was frustating: I had to wait until the system started to beep, and reboot... And second, I wanted to find some settings in the BIOS to fix this problem, I started to search, and after 3 or 4 minutes... the same thing: "no video imput", and a black screen... How can I get my monitor to work in vga mode also? Or is something else here? Some infos: I have a HP XW-4400 Workstation, it comes with pre-installed XP, but for two years I upgrade it to Windows 7 Pro. I installed all the drivers for Windows 7 from the HP site, because on my recovery CD are only the drivers for XP. Some of the Windows 7 drivers failed to install... but all that I could install, I installed. I tried to find a driver for the "on-board vga intel video driver", but nothing to find on the HP site... I already searched everywhere on the Windows 7, and I put all the settings for monitor and video to sleep "never", but with no change when it comes to boot operations. It is very risky to not see what is going on when you defragment on boot, or when you are in the BIOS settings...
View 2 Replies
View Related
Jan 13, 2013
I am not sure if this is in the correct section of the forums, so apologies if it isnt! I have a GTX 660ti. When plugged into my 1080p television, it works perfectly. However, when I plug in my 17" dell flatpanel, it says "not supported" across the screen. Is my GPU too advanced for me to use a small monitor? I have tried changing my resolution much lower, then turning the pc off, then plugging in the 17", still not supported. Is there something I have to do in bios?
View 2 Replies
View Related
Oct 22, 2011
Got a PC with Nvidia GeForce 6150 graphics card with no overclocking. Sometimes the monitor loses signal and does not work. Sometimes it works just fine. I've tried different VGA cable and different monitor, situation didn't change. I've got 4 different connectors.
- 1 VGA and DVI on Nvidia
- 1 VGA and DVI built in into motherboard.
Sometimes, when the Nvidia doesn't work, I connect to built-in card and monitor starts working. Next time when it's out, I connect back to Nvidia. There have been situations when only one of the four connectors is working. This means that on one graphics card there may be only one connector which is functioning. I don't get this. Problem isn't in the display nor the cable. It also doesn't seem to be in the graphics card as the built-in connectors aren't fully functional neither.
View 5 Replies
View Related
Nov 21, 2012
I have an HP proBook 4440s and a external HP S2031 monitor. I can get the extended monitor feature to work outside of the VPN. Once I go into the VPN the only thing I can do is move the entire VPN to either screen. I can't share anything within the VPN such as word, excel, or outlook. how I can move items within the VPN from screen to screen?
View 1 Replies
View Related
Dec 20, 2011
I have a virus and trying to get my laptop to work in safe mode, to fix it. But my Laptop monitor is broken so I use an external monitor but now I can't get that to work.
View 4 Replies
View Related
Feb 10, 2010
I have ordered a PC (Dell Studio XPS 8100, 8GB Ram, Nvidia GeForce 240, Intel Core i5 750) and would like to use my existing BenQ FP93E S monitor with it as I am very happy with this monitor. Apparently the BenQ is compatible with Vista but I cannot find out whether it is compatible with Windows 7. I intend connecting via DVI-D.
View 3 Replies
View Related
Dec 25, 2012
I have an Acer Aspire 5741-5979 using a graphics card of Intel (R) graphics. This is a new issue I have had recently. I used to connect an external monitor to my laptop, and it worked fine. The issue is that the laptop still detects the external monitor but the external monitor does not receive a signal when I plug it in the VGA (blue trapezoid connector) have played around with the display options an exhausting amount of times and nothing works there. I tried what worked before (extending the display) and trying to clone it. I thought it might be a driver issue and I reinstalled the driver, but this didn't seem to help either. I have used many monitors when it worked, and also tried different monitors after it stopped working to no avail
View 3 Replies
View Related
Feb 1, 2013
I have a hp2009m lcd monitor the speakers wont work
View 3 Replies
View Related
Jul 5, 2010
nvidia control panel shows 2nd monitor as vga but is dvi and doesnt work it recognizes otherwise as fine in the windows settings and nvidia control panel it got reset ? after I woke it up from sleep how do i force it back?
View 4 Replies
View Related
Sep 7, 2011
I just built my computer and am having some trouble in terms of my monitor and it's connection with my computer. The computer takes a dvi cable whereas my monitor takes a vga. They both can use hdmi but the problem is that I recently read that hdmi doesn't display an image until windows is booted so I'm currently trying to install windows from the disc without any picture on my monitor. How I can do this. I know I can use a TV or monitor with a vga or get a dvi to vga chord but I kinda want it done?
View 1 Replies
View Related
Dec 29, 2011
how to install as manual without monitor a win 7 o.s?
how to install without seeking installation or processing?
my problem is my laptop is cracked lcd monbitor i cant see the display or is this a balck color only!
View 3 Replies
View Related
Aug 21, 2012
Since doing a "clean install" of Windows 7 I find that some pages are larger than the monitor. American Greetings......"Create and Print" in particular, no scroll bars, yet there is more to see. Also the background of the "desktop" appears larger than I am used to. Background is a slide show. Screen Resolution is set to the maximum (1366x768)(recommended). Asus P53E Notebook computer
View 5 Replies
View Related
Jan 12, 2013
I just built my first computer build today, & I must say that everything has seemed to go quite smooth. The problem that came up though, is after installing Windows 7 home premium 64bit OEM to my HDD (it went through the whole copying files,expanding files, ect.). Upon restarting itself, it goes to the Windows startup screen & the logo appears normally for a few seconds & then the monitor goes black/goes to sleepEverything inside the computer is still running at this point I should addThere's no debug code on my motherboard so I'm assuming everything is fine inside.I'm using a HP w2207 monitor with a DVI connection to a ASUS HD4870 GPU.
View 2 Replies
View Related
Aug 10, 2012
just installed onto a new machine windows7 home premium the monitor reports the vga signal as out of range (ie the resolution is too high) i have tried leaving the monitor disconnected until the machine has been on for 10 mins( same result) i have tried to get it into safe mode and it says "setup cannot continue in safe mode computer will restart now" so basically I am stuck I have gone into cmos on the mother board and reduced the on boardgraphics memmory to 64mb in an attempt to drop the resolution I do not have any other monitors available (within ten miles)?
View 1 Replies
View Related
