Monitor Goes To Sleep After Completion Process During Windows 7 Install?
Jan 12, 2013
I just built my first computer build today, & I must say that everything has seemed to go quite smooth. The problem that came up though, is after installing Windows 7 home premium 64bit OEM to my HDD (it went through the whole copying files,expanding files, ect.). Upon restarting itself, it goes to the Windows startup screen & the logo appears normally for a few seconds & then the monitor goes black/goes to sleepEverything inside the computer is still running at this point I should addThere's no debug code on my motherboard so I'm assuming everything is fine inside.I'm using a HP w2207 monitor with a DVI connection to a ASUS HD4870 GPU.
Sometimes when I click start and sleep on my computer (windows 7) the monitor will go to sleep but the computer is still running. I cannot wake my monitor up so there is nothing I can do to wake it up besides manually turning it off using the button on the computer case.
I am running Win 7 and I checked the registry key: CompletionChar and PathCompletionChar, they are both set to 26, I've also tried changing it to 9. None of it works.When I type in the command prompt and hit tab, it just tabs over like it's in a word doc...
I am using Win 7 Ultimate 64 and have a HP ASUSTeK Tiger LNA Hybrid TV Tuner. Everything works fine until mce has been running for about 20 min and the monitor goes into standby and the computer is still on.. I can´t wake up the computer throw my remote either so i have turn it off and this happens everytime..
I don´t know if this has something do with it. The monitor is a 30 inch lcdmonitor from HP LP3065 and is connected to both of the 2 existing dvi-inputs on my nvidiacard
I am using the drives for monitor, videocard , tvcard that been installed when windows 7 Ultimate 64 was installed.
I recently purchased a new laptop with windows 7 installed, it was running smooth and fine in the beginning until (i believe is after a windows update) that after startup of window, my COMPUTER panel always opens by itself. I have reformatted the laptop for which i thought it was some kind of virus, then after a few windows update the problem still remain. Am i the only one having this problem?
My monitor goes to sleep after about 10 minutes when I am watching a movie or something. Its really annoying because I have changed the screensaver and monitor power settings (in display settings) to never, I have changed the power settings (in Control Panel -> Power Settings -> Edit Settings -> Advanced) and put everything at never. Still the problem persists.
I know there has to be a simple fix to this but I'm banging my head against the wall right now trying to figure this out. Everytime my PC goes to sleep I'll press a button on my keyboard or move my mouse and it will wake up just fine, but the monitor won't wake up. I've also noticed that the backlight on my keyboard doesn't show up. I've tried different monitors and removed the VGA cable from the graphics card after waking up and plugged it back in and no video. I have to reboot the computer to get video again and everything works great.. until it goes into sleep mode again. I have updated my graphics card driver (Geforce GT 210) and still no fix. I haven't made any changes that would cause this. Someone has to know something about this
I would like to find out if there is a setting that will allow me to sleep my dekstop monitor but not my projector? I am running the projector as an extended display. I do not want to connect just to projector and have my desktop displayed via the projector.
2 hour hibernation for both CPU and monitor worked perfectly for about two weeks, waking up with a touch to the spacebar. Then a few days ago the monitor would not wake up but the computer did. Now if I turn off the AC .
power to both units and then re-boot the monitor will turn on but will go back to sleep in about 15 minutes with the blue light blinking. The computer will complete a DL or backup with monitor sleeping so it appears OK.
Checks so far:
1. Updated drivers for both monitor and video card with latest available. Also updated chipset and BIOS (504).
2. Swapped monitors between computers and the problem went to the second monitor. Main monitor worked all day on second computer.
3. Spoke to ASUS tech support and was told that the monitor is controlled by the OS. Suggested I enable ACPI 2.0 support (default disabled) and disable ACPI APIC Support (default enabled) in BIOS. Won't boot to OS when ACPI APIC Support disabled.
4. Found a few similar cases on the Internet but no solutions.
5. Even tried turning off hibernation and setting monitor timeouts in the Powercfg using CMD prompt.
6. Re-installed OS, big mistake as it took several hours to get re-registered.
im having problems with my monitor, it doesnt want to get out of sleep mode. Right now I have the comp apart which is no problem for me to put it back together. Im assuming its either the battery not giving enough power or the connection where you plug the monitor into is bad.
I have a Dell Studio XPS435 MT running Windows 7. For the past six months I noticed that when waking the computer from sleep mode, occasionally the monitor would not wake up and I would have to reboot. It got worse and worse until now it will never wake up without rebooting. I also noticed when I reboot, if I don't wait a few seconds for the computer noises to stop and immediately press the power button; the computer starts beeping loudly and nothing works. I have to manually shut it down and wait about 30-40 seconds to reboot.
I've recently ran into this problem on my computer. My monitor will not sleep while the computer is locked. If I just let it sit, the screen saver will appear, then the monitor will sleep. However, once the computer is locked, the monitor will not sleep.The monitor auto sleeping was working perfectly fine last week.I have triple checked the Power Options, ensuring the monitor sleeps in 10 minutes (screen saver activates at 5 minutes). I've also looked at the Advanced Power Options setting, and that is set at 10 minutes as well. I have reset to defaults and the problem still persists. I have also tried to set a GPO to see if that would work, nothing either.how the monitor will sleep when the computer isn't locked.I know I could just sleep my computer (I don't want to) or turn my monitor off (this gets annoying after a while).
Edit: What I've done/tried:
Triple checked monitor settings/power options Reset to defaults, then set the monitor to sleep at 10 minutes Changed to a new theme Enabled monitor sleep GPO Restarted multiple times Disabled screen saver My monitor has no sleep settings (settings, not function; it has the sleep function)
sometimes not all the time after my pc has been in sleep mode, the monitors dont come back on, i can see the pc wakes up but the monitors stay black and so far the only way ive got it to work is to power off and reboot.
all my drivers are upto date what could be causing this i dont realy want to disable the sleep mode?
Downloads in Flashget stop when windows 7 puts my monitor to sleep. I can line up downloads in Flashget and they work fine while I'm using the PC. However as soon as the monitor is put to sleep by Windows, the downloads stop. Moving the mouse brings the monitor to life and the downloads resume - however, the usually speed drops considerably (from 800kps to around 100kps) and does not improve unless I restart.
Originally I thought this was related to scheduled downloads. I set up a scheduled, off-peak download overnight and when I got up I'd find that the downloads had failed. However, I noticed the issue was happening whenever I downloaded and left the computer for a period of time.
Power settings are all on high. Harddrive/computer sleep is off. Monitor sleep is the only thing on (15 minutes). Ethernet controller has been set to not allow the computer to turn off (unchecked).
I'm using KIS2010 which may be blocking network access somehow. But disabling KIS and setting Flashget as trusted has no effect.
Is it possible that the ethernet is being powered down somehow when the monitor sleeps? Any additional settings under the Ethernet controller/power settings I can try?
Ethernet is onboard Marvell Yukon. Latest driver from Marvell installed.
My computer monitor won't wake up from sleep mode. The power light flashed blue like it is asleep but when I hit the keyboard or click the mouse nothing happens. I even restarted the computer and tested to see if the wires were bed or loose and that didn't help either. I switched out the monitor and the new one works on the computer so it seems it is something with the monitor.
The thread title about sums it up! When I try to wake my computer from sleep mode, my monitor gets no signal/is black. The "rest" of the computer seems to wake up just fine.
The monitor was working fine with Windows Server 2008, after sleep mode, but I just recently upgraded to windows 7.
I have already tried: displayswitch /extend displayswitch /internal in a .bat file
using "Hibernate Trigger", "Power Triggers" and Windows task sheduler.
Doesn't work at all for me (I've got Windows 7 Proffesional 32-bit Service Pack 1)
I went to sleep last night with the computer on (Windows 7 7077) like always and this morning it's still on but none of the usb devices are working, monitor doesn't come back from sleep state but the fans on all the components are still spinning. I tried hard rebooting 3-4 times and still nothing. I let it sit and cool off for a bit and still nothing. Anyone know what the problem could be?
I was thinking it was the motherboard but then wouldn't the ethernet light be off if the board wasn't working? The only thing on the computer the has been overclocked is the CPU which I took from 3.0ghz to 3.8ghz and it's been running fine on the stock cooler for the past 6 months almost and then bam it's like this. I don't think it could of been over heating as the temps usually run 30C at idle and 50-60C at full load and the side is off of it.
so the Windows 7 Ultimate 64bit install is fresh, and all the drivers are the latest available. I have updated my mobo's bios to the latest version through Asus' "AI Suite II" which makes things very simple. I want my PC to be able to go into sleep mode but I don't want to have to force shutdown every time it goes into sleep mode after a time span. For some reason if I wake my PC after its been in sleep mode for a short period everything turns back on just fine... I know there might be a solution through the configuration panel
New Build Asus M5A88-M EVO Phenom II x6 1055T 2.8Ghz Samsung 840 series 64Bb SSD Radeon HD5570 Win7 Professional 64 Bit
Annoying intemittent fault whereby the monitor is incorrectly detected as a generic model instead of an LG L192WS and the screen resolution changes to a lower setting which loses a large percentage of the desktop. I've updated to the latest AMD drivers as that seemed to work for others with a similar problem but to no avail. it takes 5 mouse clicks to open desktop and reset the display to the correct one, but after spending quite a bit to speed up my system I begrudge the time!
Over the past week, my monitor,keyboard, and mouse become unresponsive after waking from sleep. I haven't installed any new software in the past couple weeks and all my drivers are current. It doesn't happen every time, its random. About 3-4 times in the past week I come home and hit the keyboard to wake it up, the computer wakes up, but the monitor, keyboard, and mouse never come on. I've tried unplugging both the keyboard and mouse and it still won't work. I have to hard reset the comp for them to come back on. Unfortunately, since its random, I can't duplicate it, I just have to try some things out and wait to see if it happens anymore.
When I choose "SLEEP" it only turns off the monitor , normally when the PC sleeps you can hear everything turn off and the power button glows... it does this if i leave it for 25 minutes (as thats how long its set too wait before sleeping) - but when I manually force sleep it seems to simply turn off the monitor? you can hear alll fans and hard-drive still going, when i wake it its at the login screen
I got an Acer Aspire One Happy Netbook yesterday and ever since been trying to install skype. The installation gets to around 30% and then goes back to 0% each time I have tried this. My operating system is Windows 7 Starter - 32 bit.
My Mom has an HP laptop. She recently purchased a new HP printer and I have been trying for the last 4 days to get it to install/connect. I've been in touch with HP but the links they provide aren't resolving the issues. First, using the CD that came with the printer: hangs up at around 85-90%. It doesn't not show up as installed. I copied the CD to the desktop, modified Setup.exe in CFFExplorer and Run as Administrator and it appears to completely install; however, when I go to Device Manager, it says no driver is found.
I sometimes have the option to update and sometimes that seems to work but I can't access it through Add a Printer (which has the green bar run across the top, then pulsate and freeze). Trying to install using the driver I download from HP results in no installing screen appearing but it does hang up in the background and the only way to stop it is to Restart. The same thing happens if I try to use HPs Wizard. I've installed several HP printers through the years and not had this much trouble. That doesn't even include the dozens of times I've had to reinstall my own HP printer because of its contrariness!
Additionally, attempts to uninstall the old printer results in it hanging up/freezing soon in to the process, whether I try to uninstall from the Start menu, file or Uninstall program. I'm not even being able to get the Windows Updates to install - that process also just hangs up/freezes. I've not checked her machine in a while so there are many updates; however, when I just choose 1 at a time, it still sits at 0% and never moves. The printer, when connected, is with the USB and I've tried all 4 USB ports on this just in case. Am still in touch with HP but they are sending me the usual links so I'm hoping perhaps someone here can think of something a little less ordinary!
whenever I try to install a game or program (happens more often for games), the setup process freezes at random intervals. Not the kind of freeze where it crashes or gets the 'not responding' error message, but I can't click anything or advance to the next part of the setup until it goes away. It's really strange, and only started happening two weeks ago. I'm running Ultimate 32-bit.
When I try to install Windows 7 from an USB stick on an Asus EeePC 1201HAB with a Kingston SSDNow V series 120GB the process freezes when I try to install Windows 7 Home Premium or format on the ssd.
Even installing from an external dvd player results in the same problem, when Windows starts to copy files during installation, the proces freezes every time. The ssd itself is working, I checked that in another system. Could it be a problem with the combination of a Kingston SSDNow V series in the Asus eeePC 1201HAB?
I am getting this error all the time with Windows 7. I open a text file I want to edit, then go to save my changes and I get this error:"The process cannot access the file because it is being used by another process".I have full admin rights, running Win7 Ultimate x64 SP1. From a bit of research I have seen where many others have been experiencing this problem or something similar too. The only "fix" (that doesn't work all the time) is to close explorer.exe and then restart it to "release the handle"? Anyway, this is not acceptable for all the money and time I spent upgrading/configuring this new OS from XP -where I never had this problem- and seriously cuts down my productivity.Has Microsoft even acknowledged this as a bug yet? I can duplicate this scenario the second or third time I try to edit/save/delete a text file and I know that explorer.exe is the problem or a big part of it in any case. I don't want to go back to XP x64 but having to deal with this headache 10-20 times a day is just too much to ask.The file here is a game's map script & has to be saved to a .pk3 and then loaded into the program's root before it can run so i know othing else is running the file. No apps running in taskmngr either.
