Monitor Incorrectly Detected After Sleep Mode

Dec 29, 2011

New Build Asus M5A88-M EVO
Phenom II x6 1055T 2.8Ghz
Samsung 840 series 64Bb SSD
Radeon HD5570
Win7 Professional 64 Bit

Annoying intemittent fault whereby the monitor is incorrectly detected as a generic model instead of an LG L192WS and the screen resolution changes to a lower setting which loses a large percentage of the desktop. I've updated to the latest AMD drivers as that seemed to work for others with a similar problem but to no avail. it takes 5 mouse clicks to open desktop and reset the display to the correct one, but after spending quite a bit to speed up my system I begrudge the time!

View 9 Replies


ADVERTISEMENT

Monitor Stuck In Sleep Mode?

Jul 7, 2012

im having problems with my monitor, it doesnt want to get out of sleep mode. Right now I have the comp apart which is no problem for me to put it back together. Im assuming its either the battery not giving enough power or the connection where you plug the monitor into is bad.

View 14 Replies View Related

Monitor Cannot Wake Up From Sleep Mode

Jun 17, 2012

I have a Dell Studio XPS435 MT running Windows 7. For the past six months I noticed that when waking the computer from sleep mode, occasionally the monitor would not wake up and I would have to reboot. It got worse and worse until now it will never wake up without rebooting. I also noticed when I reboot, if I don't wait a few seconds for the computer noises to stop and immediately press the power button; the computer starts beeping loudly and nothing works. I have to manually shut it down and wait about 30-40 seconds to reboot.

View 1 Replies View Related

Monitor Not Wake From Sleep Mode

Nov 13, 2009

sometimes not all the time after my pc has been in sleep mode, the monitors dont come back on, i can see the pc wakes up but the monitors stay black and so far the only way ive got it to work is to power off and reboot.

all my drivers are upto date what could be causing this i dont realy want to disable the sleep mode?

View 9 Replies View Related

Monitor Goes To Sleep Mode Instantly

Oct 2, 2011

reset video card to factory setting, reboot if it still goes to sleep,remove added on video card hook monitore up to onboard vid card

View 4 Replies View Related

Monitor Won't Wake Up From Sleep Mode?

Dec 3, 2012

My computer monitor won't wake up from sleep mode. The power light flashed blue like it is asleep but when I hit the keyboard or click the mouse nothing happens. I even restarted the computer and tested to see if the wires were bed or loose and that didn't help either. I switched out the monitor and the new one works on the computer so it seems it is something with the monitor.

View 2 Replies View Related

Monitor Is Black After Sleep Mode But Not Hibernation?

Sep 14, 2011

The thread title about sums it up! When I try to wake my computer from sleep mode, my monitor gets no signal/is black. The "rest" of the computer seems to wake up just fine.

The monitor was working fine with Windows Server 2008, after sleep mode, but I just recently upgraded to windows 7.

I have already tried: displayswitch /extend displayswitch /internal in a .bat file

using "Hibernate Trigger", "Power Triggers" and Windows task sheduler.

Doesn't work at all for me (I've got Windows 7 Proffesional 32-bit Service Pack 1)

View 9 Replies View Related

Monitor Won't Turn Back On After Sleep Mode?

Apr 17, 2011

so the Windows 7 Ultimate 64bit install is fresh, and all the drivers are the latest available. I have updated my mobo's bios to the latest version through Asus' "AI Suite II" which makes things very simple. I want my PC to be able to go into sleep mode but I don't want to have to force shutdown every time it goes into sleep mode after a time span. For some reason if I wake my PC after its been in sleep mode for a short period everything turns back on just fine... I know there might be a solution through the configuration panel

View 5 Replies View Related

Monitor Not Detected

Dec 7, 2009

I'm running into this and issue and I can't peg down a cause. I recently updated my Vista HTPC to Windows 7. When booting up I can get into the OS, but the screen goes black shortly after.

I have tried two monitors: the Panasonic plasma just goes black and when I try Samsung Syncmaster LCD it looks like it's searching for digital, then analog sources.

I have an Nvidia 8400 GS card and I've tried both the 191.07 and 195.62 drivers. I've also let Windows install the drivers after uninstalling the Display Adapter in Device Manager in Safe Mode.

When I start in Safe Mode I cannot recreate the issue. I tried uninstalling/reinstalling the drivers in Safe Mode.

View 7 Replies View Related

3rd Monitor Not Detected

Jan 28, 2010

I was using two monitors with two ATI Radeon 4800 cards and that worked fine. I just purchased another monitor (Samsung) and now I cannot get it detected. The device manager is only showing 2 generic PnP monitors. I'm not sure why they would not be the specific monitors brands either (one Samsung and one Acer).

Any way of getting the third monitor detected? I've heard about deleting the graphics card drivers and then the monitor might be detected. But I do not know the procedure for doing that.

View 4 Replies View Related

2nd Monitor Not Detected Vga To Dvi-d Adapter

Mar 2, 2012

I'm running a ASUS P8H67-V REV 3.0 mothboard which has a VGA and a DVI-D output. When I connect a second monitor w/ a vga to dvi-d adapter, it does not detect the monitor at all. I've tested the DVI-D port with a dvi to hdmi cable to my TV, at it works as soon as I hook that up. Below is the onboard graphics info.

View 5 Replies View Related

Second Monitor Working But Not Detected

Dec 28, 2009

So I got a new monitor for xmas, the LG Flatron W1953T and I wanted to get it running with my Dell monitor. I have an onboard NVIDIA GeForce 8300 and at first just tried to plug the new monitor into the DVI port but I think it's broken or something.

Anyways, I bought this Triton Technologies External VGA video card that I just plug into a USB port, and now I have both monitors running through VGA, and my second monitor is up, but the resolution just looks terrible on the second one, and when I go to adjust resolution or whatever it says I have only one monitor and if I hit detect it doesn't come up.

In my devices menu it says I have the dell menu, and then two other "Generic non PnP monitors" even though I only have one other monitor connected.

I also go to my NVIDIA control panel and it doesnt say the second monitor is detected.

Both monitors are working, like I see my desktop background on the other monitor and I can drag stuff over to it but its just not detected or something idk. I want to download Ultramon too, (Or should I get something else w/ windows 7? I heard you cant have two taskbars w seven.

View 1 Replies View Related

HP External Monitor Not Detected

Sep 12, 2012

I can't seen to be able to utilize my HP external monitor with my Sony laptop?

View 4 Replies View Related

Stop Laptop From Going Into Hibernation Mode / Sleep Mode?

Sep 17, 2010

How do you stop laptop from going into hibernation mode / sleep mode?

I run a program that takes 8 hours. I need the laptop to stay awake.

View 1 Replies View Related

Webcam Not Detected After Sleep, Shutdown, Or Restart

Oct 30, 2010

I have Windows 7 64 bit Ultimate edition. I got a Logitech Quickcam pro 9000, I have had it for a while and always had this problem. So the problem is whenever my PC is shut down, restarted, or wakes from sleep my webcam is either not detected, or is detected as a USB 1.1 device, instead of USB 2.0. In order for it to be detected as USB 2.0, or even detected at all, I have to unplugg it and plug it back in. I have all the current software and drivers for my motherboard, windows, and my webcam, in fact I just rechecked yesterday. So, my motherboard is an Nvidia 780i sli. I have looked in the Bios and USB 2.0 is definately enabled. Besides I know it working cause none of my other devices have this issue, plus like I said if I unplugg then plug the webcam back in, it is once again detected as a USB 2.0 device. I have tried all my USB plugs on my PC, and same result. So maybe a bios update? I have the P06 and noticed there is a P10 bios version now. Also when I go into device manager and click show devices by connection, I do not see a USB 2.0 catagory anywhere. Shouldn't USB 2.0 devices be in the USB 2.0 subcatagory? Or is it listed as something different cause of my MB, or Windows 7?

View 4 Replies View Related

Upgraded To GTX 670, Second Monitor No Longer Detected?

Jun 29, 2012

So I just upgraded from a GTX 560 TI to a GTX 670 and now my computer can't detect my second monitor. My main monitor is plugged in via DVI while my second computer is plugged in via HDMI. I've been on nvidia control panel and tried finding my second monitor there on the "multiple monitors" section, no second monitor there either.

View 2 Replies View Related

External Monitor Used To Work/now It Doesn't But It Is Still Detected?

Dec 25, 2012

I have an Acer Aspire 5741-5979 using a graphics card of Intel (R) graphics. This is a new issue I have had recently. I used to connect an external monitor to my laptop, and it worked fine. The issue is that the laptop still detects the external monitor but the external monitor does not receive a signal when I plug it in the VGA (blue trapezoid connector) have played around with the display options an exhausting amount of times and nothing works there. I tried what worked before (extending the display) and trying to clone it. I thought it might be a driver issue and I reinstalled the driver, but this didn't seem to help either. I have used many monitors when it worked, and also tried different monitors after it stopped working to no avail

View 3 Replies View Related

Click Start And Sleep Computer / Monitor Will Go To Sleep But Computer Is Still Running

May 20, 2012

Sometimes when I click start and sleep on my computer (windows 7) the monitor will go to sleep but the computer is still running. I cannot wake my monitor up so there is nothing I can do to wake it up besides manually turning it off using the button on the computer case.

View 1 Replies View Related

Realtek Ethernet Controller Not Detected - Deep Sleep Error

Aug 4, 2010

I did a fresh Windows 7 64 bit installation and everything was going fine (besides the BSOD problems about the graphics card which I fixed by renaming nvlddmkm.sys which was the cause of the BSOD) until I tried installing the Ethernet drivers.

Specs:
Gigabyte GA-MA69G-S3H Motherboard
AMD Athlon 64 6000+ CPU
4GB 800 DDR2 Memory
585 Watt Power supply
XFX 8800 GTS GPU
2 Seagate Hard drives : 250 GB & 160GB

Windows doesn't even detect the adapter even though its onboard. I've tried installing the drivers from the original dvd (and in compatible and as administrator) with no luck. I also tried downloading the latest lan drivers from [URL] but it still didn't work. I got a deep sleep error or something. (Which I couldn't resolve cause there's nothing in network connections, not even the 1394 connection which is also turned on in the bios)

No it does not show in device manager under Network adapters. Actually there isn't even a network adapter subcategory unless I click show hidden devices(which has multiple devices then but no network controller). The only driver with a question mark is the graphics card driver which I will try to install after I get the Ethernet adapter working. Microsoft did say its 64 bit compatible [URL] so I don't know what to do. I did check the settings in the bios to see if everything with network was enabled and whatnot.. I also tried resetting everything in the bios to default settings with no luck.

Out of desperation tried adding the device manually through device manager (action>add Legacy hardware>manually>network adapters>have disk..) I tried this with the latest drivers I got from gigabytes website but it didn't even show a device, so I tried the original drivers from the mobo dvd which gave 3 devices.. I tried them all.. each time reinstalling the latest drivers and whatnot to no avail. I'm Thinking of trying to use the windows 64 bit repair disk seeing as it might be software related seeing as it doesn't even show the firewire adapter.

View 14 Replies View Related

Get The Scan To Not Stop During Sleep Mode Or Scan If It's In Sleep Mode

Jan 19, 2012

wreaks havoc with my Norton full system scan. It is scheduled weekly, but never does it, because my computer is on, but sleeping. How can I get the scan to not stop during sleep mode or scan if it's in sleep mode? I having to constantly unsleep my computer or change my control panel settings then change it back.

View 8 Replies View Related

MCE / Monitor Goes To Sleep

Dec 24, 2009

I am using Win 7 Ultimate 64 and have a HP ASUSTeK Tiger LNA Hybrid TV Tuner. Everything works fine until mce has been running for about 20 min and the monitor goes into standby and the computer is still on.. I can´t wake up the computer throw my remote either so i have turn it off and this happens everytime..

I don´t know if this has something do with it. The monitor is a 30 inch lcdmonitor from HP LP3065 and is connected to both of the 2 existing dvi-inputs on my nvidiacard

I am using the drives for monitor, videocard , tvcard that been installed when windows 7 Ultimate 64 was installed.

View 3 Replies View Related

Monitor Going To Sleep Regardless Of Settings?

Aug 5, 2011

My monitor goes to sleep after about 10 minutes when I am watching a movie or something. Its really annoying because I have changed the screensaver and monitor power settings (in display settings) to never, I have changed the power settings (in Control Panel -> Power Settings -> Edit Settings -> Advanced) and put everything at never. Still the problem persists.

View 4 Replies View Related

All Of A Sudden Monitor Goes To Sleep?

Nov 14, 2011

i have power settings to never sleep, if i move the mouse it comes back on. display to stay on where else can i look? in 7 pro.

ok im an idiot seems i installed a windows theme it turned on screensaver

View 1 Replies View Related

PC Won't Wake Monitor After Sleep?

Jan 27, 2012

I know there has to be a simple fix to this but I'm banging my head against the wall right now trying to figure this out. Everytime my PC goes to sleep I'll press a button on my keyboard or move my mouse and it will wake up just fine, but the monitor won't wake up. I've also noticed that the backlight on my keyboard doesn't show up. I've tried different monitors and removed the VGA cable from the graphics card after waking up and plugged it back in and no video. I have to reboot the computer to get video again and everything works great.. until it goes into sleep mode again. I have updated my graphics card driver (Geforce GT 210) and still no fix. I haven't made any changes that would cause this. Someone has to know something about this

View 5 Replies View Related

Sleep Monitor But Not Projector

Oct 24, 2009

I would like to find out if there is a setting that will allow me to sleep my dekstop monitor but not my projector? I am running the projector as an extended display. I do not want to connect just to projector and have my desktop displayed via the projector.

View 0 Replies View Related

Monitor Goes To Sleep When Hibernate Set To NEVER

Nov 18, 2009

2 hour hibernation for both CPU and monitor worked perfectly for about two weeks, waking up with a touch to the spacebar. Then a few days ago the monitor would not wake up but the computer did. Now if I turn off the AC .

power to both units and then re-boot the monitor will turn on but will go back to sleep in about 15 minutes with the blue light blinking. The computer will complete a DL or backup with monitor sleeping so it appears OK.

Checks so far:

1. Updated drivers for both monitor and video card with latest available. Also updated chipset and BIOS (504).

2. Swapped monitors between computers and the problem went to the second monitor. Main monitor worked all day on second computer.

3. Spoke to ASUS tech support and was told that the monitor is controlled by the OS. Suggested I enable ACPI 2.0 support (default disabled) and disable ACPI APIC Support (default enabled) in BIOS. Won't boot to OS when ACPI APIC Support disabled.

4. Found a few similar cases on the Internet but no solutions.

5. Even tried turning off hibernation and setting monitor timeouts in the Powercfg using CMD prompt.

6. Re-installed OS, big mistake as it took several hours to get re-registered.

View 1 Replies View Related

Monitor Will Not Sleep While Computer Is Locked

Sep 26, 2012

I've recently ran into this problem on my computer. My monitor will not sleep while the computer is locked. If I just let it sit, the screen saver will appear, then the monitor will sleep. However, once the computer is locked, the monitor will not sleep.The monitor auto sleeping was working perfectly fine last week.I have triple checked the Power Options, ensuring the monitor sleeps in 10 minutes (screen saver activates at 5 minutes). I've also looked at the Advanced Power Options setting, and that is set at 10 minutes as well. I have reset to defaults and the problem still persists. I have also tried to set a GPO to see if that would work, nothing either.how the monitor will sleep when the computer isn't locked.I know I could just sleep my computer (I don't want to) or turn my monitor off (this gets annoying after a while).

Edit: What I've done/tried:

Triple checked monitor settings/power options
Reset to defaults, then set the monitor to sleep at 10 minutes
Changed to a new theme
Enabled monitor sleep GPO
Restarted multiple times
Disabled screen saver
My monitor has no sleep settings (settings, not function; it has the sleep function)

View 9 Replies View Related

Downloads Stopping On Monitor Sleep

Oct 1, 2009

Downloads in Flashget stop when windows 7 puts my monitor to sleep. I can line up downloads in Flashget and they work fine while I'm using the PC. However as soon as the monitor is put to sleep by Windows, the downloads stop. Moving the mouse brings the monitor to life and the downloads resume - however, the usually speed drops considerably (from 800kps to around 100kps) and does not improve unless I restart.

Originally I thought this was related to scheduled downloads. I set up a scheduled, off-peak download overnight and when I got up I'd find that the downloads had failed. However, I noticed the issue was happening whenever I downloaded and left the computer for a period of time.

Power settings are all on high. Harddrive/computer sleep is off. Monitor sleep is the only thing on (15 minutes). Ethernet controller has been set to not allow the computer to turn off (unchecked).

I'm using KIS2010 which may be blocking network access somehow. But disabling KIS and setting Flashget as trusted has no effect.

Is it possible that the ethernet is being powered down somehow when the monitor sleeps? Any additional settings under the Ethernet controller/power settings I can try?

Ethernet is onboard Marvell Yukon. Latest driver from Marvell installed.

View 4 Replies View Related

Monitor Doesn't Come Back From Sleep State

Apr 17, 2009

I went to sleep last night with the computer on (Windows 7 7077) like always and this morning it's still on but none of the usb devices are working, monitor doesn't come back from sleep state but the fans on all the components are still spinning. I tried hard rebooting 3-4 times and still nothing. I let it sit and cool off for a bit and still nothing. Anyone know what the problem could be?

I was thinking it was the motherboard but then wouldn't the ethernet light be off if the board wasn't working? The only thing on the computer the has been overclocked is the CPU which I took from 3.0ghz to 3.8ghz and it's been running fine on the stock cooler for the past 6 months almost and then bam it's like this. I don't think it could of been over heating as the temps usually run 30C at idle and 50-60C at full load and the side is off of it.

View 9 Replies View Related

Monitor,Keyboard And Mouse Not Waking From Sleep?

Feb 8, 2013

Over the past week, my monitor,keyboard, and mouse become unresponsive after waking from sleep. I haven't installed any new software in the past couple weeks and all my drivers are current. It doesn't happen every time, its random. About 3-4 times in the past week I come home and hit the keyboard to wake it up, the computer wakes up, but the monitor, keyboard, and mouse never come on. I've tried unplugging both the keyboard and mouse and it still won't work. I have to hard reset the comp for them to come back on. Unfortunately, since its random, I can't duplicate it, I just have to try some things out and wait to see if it happens anymore.

View 1 Replies View Related

Monitor Goes To Sleep After Completion Process During Windows 7 Install?

Jan 12, 2013

I just built my first computer build today, & I must say that everything has seemed to go quite smooth. The problem that came up though, is after installing Windows 7 home premium 64bit OEM to my HDD (it went through the whole copying files,expanding files, ect.). Upon restarting itself, it goes to the Windows startup screen & the logo appears normally for a few seconds & then the monitor goes black/goes to sleepEverything inside the computer is still running at this point I should addThere's no debug code on my motherboard so I'm assuming everything is fine inside.I'm using a HP w2207 monitor with a DVI connection to a ASUS HD4870 GPU.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved