I'm running a ASUS P8H67-V REV 3.0 mothboard which has a VGA and a DVI-D output. When I connect a second monitor w/ a vga to dvi-d adapter, it does not detect the monitor at all. I've tested the DVI-D port with a dvi to hdmi cable to my TV, at it works as soon as I hook that up. Below is the onboard graphics info.
View 5 RepliesI'm running into this and issue and I can't peg down a cause. I recently updated my Vista HTPC to Windows 7. When booting up I can get into the OS, but the screen goes black shortly after.
I have tried two monitors: the Panasonic plasma just goes black and when I try Samsung Syncmaster LCD it looks like it's searching for digital, then analog sources.
I have an Nvidia 8400 GS card and I've tried both the 191.07 and 195.62 drivers. I've also let Windows install the drivers after uninstalling the Display Adapter in Device Manager in Safe Mode.
When I start in Safe Mode I cannot recreate the issue. I tried uninstalling/reinstalling the drivers in Safe Mode.
I was using two monitors with two ATI Radeon 4800 cards and that worked fine. I just purchased another monitor (Samsung) and now I cannot get it detected. The device manager is only showing 2 generic PnP monitors. I'm not sure why they would not be the specific monitors brands either (one Samsung and one Acer).
Any way of getting the third monitor detected? I've heard about deleting the graphics card drivers and then the monitor might be detected. But I do not know the procedure for doing that.
So I got a new monitor for xmas, the LG Flatron W1953T and I wanted to get it running with my Dell monitor. I have an onboard NVIDIA GeForce 8300 and at first just tried to plug the new monitor into the DVI port but I think it's broken or something.
Anyways, I bought this Triton Technologies External VGA video card that I just plug into a USB port, and now I have both monitors running through VGA, and my second monitor is up, but the resolution just looks terrible on the second one, and when I go to adjust resolution or whatever it says I have only one monitor and if I hit detect it doesn't come up.
In my devices menu it says I have the dell menu, and then two other "Generic non PnP monitors" even though I only have one other monitor connected.
I also go to my NVIDIA control panel and it doesnt say the second monitor is detected.
Both monitors are working, like I see my desktop background on the other monitor and I can drag stuff over to it but its just not detected or something idk. I want to download Ultramon too, (Or should I get something else w/ windows 7? I heard you cant have two taskbars w seven.
I can't seen to be able to utilize my HP external monitor with my Sony laptop?
View 4 Replies View RelatedI bought USRobotics. wireless USB adapter but have problem with driver. I installed driver software but still not detect from system.
View 2 Replies View RelatedSo I just upgraded from a GTX 560 TI to a GTX 670 and now my computer can't detect my second monitor. My main monitor is plugged in via DVI while my second computer is plugged in via HDMI. I've been on nvidia control panel and tried finding my second monitor there on the "multiple monitors" section, no second monitor there either.
View 2 Replies View RelatedNew Build Asus M5A88-M EVO
Phenom II x6 1055T 2.8Ghz
Samsung 840 series 64Bb SSD
Radeon HD5570
Win7 Professional 64 Bit
Annoying intemittent fault whereby the monitor is incorrectly detected as a generic model instead of an LG L192WS and the screen resolution changes to a lower setting which loses a large percentage of the desktop. I've updated to the latest AMD drivers as that seemed to work for others with a similar problem but to no avail. it takes 5 mouse clicks to open desktop and reset the display to the correct one, but after spending quite a bit to speed up my system I begrudge the time!
I have an Acer Aspire 5741-5979 using a graphics card of Intel (R) graphics. This is a new issue I have had recently. I used to connect an external monitor to my laptop, and it worked fine. The issue is that the laptop still detects the external monitor but the external monitor does not receive a signal when I plug it in the VGA (blue trapezoid connector) have played around with the display options an exhausting amount of times and nothing works there. I tried what worked before (extending the display) and trying to clone it. I thought it might be a driver issue and I reinstalled the driver, but this didn't seem to help either. I have used many monitors when it worked, and also tried different monitors after it stopped working to no avail
View 3 Replies View RelatedW7 Professional is installed and working great except that I cannot get my second monitor to work.
Worked fine in XP using a Tritton UV100 USB2 adapter.
Downloaded new W7 drivers from Tritton, installed them OK, and the second monitor is listed on the devices page as a USB2 VGA device, but in the column for Unspecified Device, and does not show up in the Control Panel display where screen is normally extended to 2 monitors.
Have tried all combinations of connecting monitor first, then drivers; or drivers first, followed by monitors. It has to be something really simple that i am missing.
OK as Ive been looking around the site Ive noticed that there are many issues like this one, and Im sure there are plenty of people out there that have this problem.
My "Windows Experience Index" is at a 1.0 only because my Graphics, and Gaming Graphics rating are at 1.0. Everything else is at 5.9 which I can live with.
When I look at my adavanced settings for my monitor it Shows my Nvidia GPU but only running with 14 MB total avail mem. And I know that NOT right. Unfortunatly when I went to Nvidia's site and ran the auto detect it said that I didnt even have their product and that I had the Standard VGA Graphics Adapter.
I can't seem to find the right drivers for this to fix it all, and I would love to be able to "Experience" Windows 7 at its fullest. Any help would be greatly appreciated. Hopefully the attached photos will give you an idea as to what Im working with. Also When i toubleshoot Aero Ive received this message:
"The current video card may support Aero with a driver that is compliant with the Windows Display Driver Model (WDDM). Contact the manufacturer of your computer or video card for a WDDM-compatible driver."
And when I try to change my screensaver to a 3D one it states that I either need a newer graphics card or one that is compatible with Direct3D.
generic pnp monitor on standard vga graphics adapter?
View 1 Replies View RelatedI know there are several threads but they are with different cards and they didn't solve my issue...
I bought a new MEDION AKOYA P5334E and the system arrived installed normally with Windows 7 home edition.
I've installed on the computer the Windows 7 enterprise edition (x64) and many drivers could not be find. I've installed nost of them, except the display adapter. It's stuck on "standard vga graphic adapter". I have the AMD Radeon HD7570 card but no matter what I try is not working! tried to uninstall the current driver, tried to download the driver from the AMD website (when executing it - it's running but does nothing). when executed the auto detect from AMD website, I got the message "we were unable to find your product or OS"
I have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies View RelatedI have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies View RelatedI am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
View 7 Replies View RelatedI recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU
Chipset : Intel G41
Processor : Intel Core 2 Duo E6420 @ 2133 MHz
Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM )
Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1)
Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
I'm using a television (32p) as a second monitor in extended mode so that I can watch a movie in the TV and play a game in the monitor (this was my main goal). Monitor and TV lays in two different ambients, both connected to the same pc, one by normal VGA cable and the other by HDMI. I managed to differentiate the audio output so that VLC player sends it's audio to the HDMI (so that only the TV plays it) and the rest of system sounds, media players and games outputs to the speakers (basically only the VLC audio is directed to another output device). I reached my goal so that I can watch a movie fullscreen in the TV and play a game in the monitor fullscreen too without any interference from one another (nor audio or video).
The thing is, because I have the TV in another ambient I can't actually see what's going on in it, as I just "throw" the VLC window to the TV from my main monitor. And here's the question: There's a way to see the TV's desktop in my monitor? Without having to set it as main monitor so to not really switch between desktops.. The perfect thing would be if I could see the TV's desktop in a window like in remote desktops applications.
I have AT&T DSL and it just drops out, I have a 2 wire router and the DSL and Internet lights will flash red when it drops, I have had this problem for almost a year and AT&T will run a useless test and tell me everything is fine. I have searched for 3 days trying to find a Broad Band Monitor to let me know when it drops and for how long, also how many times while I am at work, or just not on the PC.
View 2 Replies View Relateddo not detected dvd rom in compaq laptop in windows7
View 4 Replies View Relatedi have a 320gb hdd,first it was quite well when i inserted in my laptop it is easily detected now i dont know what happen it cant be detected?
View 2 Replies View Relatedmy computer is acer aspire 3630.i have windows 7 32 bit os.my philips dvd drive is now not detected by my computer.when i was installing a game,beause of low battery,my computer shutted down.when i started it again,my dvd drive is not detected.it is not showing in the device manager and bios manager.what shall i do.
View 9 Replies View RelatedI am using Micromax 300c EVDO modem ( Datacard ) for wireless broadband connection. In one machine having Intel 915 Chipset motherboard, it is working fine. In the device manager, in the modem category, it shows correctly as " CDMA 2000 Rev A Modem ". In another machine, having Intel DG41TY motherboard, the device manager does not show modem. Only in other devices category, shows as Data services. ( in ports category both diagnostic and service ports are shown correctly)
View 4 Replies View RelatedI have a Toshiba Satelite C650 (PSC12C-00M00S) with Core i3. Previously it came with 4 GB RAM. It had previously 2GB + 2GB. What I did, I bought two 4GB RAM modules and replaced them with these two. I have Windows 7 Professional 64 Bit; But the problem is it is still showing 4GB in the System Properties. I did check the RAM slots, but they seem to be fine.
View 2 Replies View RelatedOK so this is with my sisters laptop, everything was apparently fine one day & not working the next.I've read it may be a driver issue & have re-installed the correct (I think) driver version, but this hasn't fixed the problem.
View 1 Replies View RelatedI Have a internal CDRW CED-8080B it appears as CD ROM Drive in the my Computer Section. Why is it not appearing as CDRW Drive?
It does Function Opens CD etc but when i try to burn i get an error.i did use a Windows 7 Trouble shooter and i said i could not burn with the drive i was then told that the Drive did not have Burning Capabilities.I Have Burn a CD In Win XP before i upgraded to Windows 7 i dont know why Windows 7 is not detecting it and only classes it as CDROM.
Driver Name: CDROM.SYS
So I just moved to a new school which uses ACER TRAVELMATE 6293 as their laptops. When they first gave it to me they put a brand new battery in it and they gave me the wrong charger, greeeat, but I went back and got the correct one.Now, the laptop DOES charge. When I turn it on, it displays the battery icon with the charging icon over it if that makes sense, however it has a red cross over it and if you hover over that it says "no battery is detected". So you have no idea how long it has left to charge and so on. BUT if you take out the charger, the laptop will not turn on (as if the battery is flat, but surely it cant be because it has charged for 24 hrs.)Usually, I would just go to the IT guys/girls at school but seeing as they keep stuffing up and it is school holidays, I am hoping you kind and smart people have a solution. I have tried to get any dust out of the charger port/hole thing. And have also taken out and re-inserted the battery twice. This is driving me a bit stupid as I have homework to do. So just to make things clear, the laptop works completely find when connected to the charger except for what I said before. Oh and this is happens when I am on either the home or school image. And it runs on windows 7 of course
View 7 Replies View Relatedjust purchased a Gateway P7902h Laptop on the 30th - it came with 64 bit vista and I decided to upgrade the OS to Windows 7 (64x as well).
Ever since the install the laptop has been unable to detect my graphics card, a Geforce GTX 260M. Every time I open a driver installation program (Gateway site only has the drivers for Vista 64x so I tried those, then the Windows 7 64x ones from the Nvidia website.) I get a 'could not locate any drivers that are compatible with your hardware' error.
Looking through the Device Manager under Display Adapters, it only has the Standard VGA Graphics Adapter and not the actual card itself. Can anyone help?
my usb keyboard works fine on my freind pc win7ultimate32bit, i have same os service pack 1 also installed, my usb is amkette company---better than local, Problemis that it was working grt for 5 months, but for past 3 weeks it is detected as a unknown device, it is detected sometimes as hid device and works well for 3-4 hoursbut then suddenly goes off and a popup with malfunction and unknown device appers all time, then it will never that day maybe 10 min sometime. i plug out all power cables,uninstall usb controllers tried everything on internet, some techniques work but no permanent solution. i even reinstalled windows last week no luck.It works on my freind pc., diff in my freind pc is he has intel motherboard and i have biostar a785ge everything up to date,only solution that is left is to use a ps/2 to usb convertor(i have to wait for 3 weeks).
View 8 Replies View Related