Downloads Stopping On Monitor Sleep

Oct 1, 2009

Downloads in Flashget stop when windows 7 puts my monitor to sleep. I can line up downloads in Flashget and they work fine while I'm using the PC. However as soon as the monitor is put to sleep by Windows, the downloads stop. Moving the mouse brings the monitor to life and the downloads resume - however, the usually speed drops considerably (from 800kps to around 100kps) and does not improve unless I restart.

Originally I thought this was related to scheduled downloads. I set up a scheduled, off-peak download overnight and when I got up I'd find that the downloads had failed. However, I noticed the issue was happening whenever I downloaded and left the computer for a period of time.

Power settings are all on high. Harddrive/computer sleep is off. Monitor sleep is the only thing on (15 minutes). Ethernet controller has been set to not allow the computer to turn off (unchecked).

I'm using KIS2010 which may be blocking network access somehow. But disabling KIS and setting Flashget as trusted has no effect.

Is it possible that the ethernet is being powered down somehow when the monitor sleeps? Any additional settings under the Ethernet controller/power settings I can try?

Ethernet is onboard Marvell Yukon. Latest driver from Marvell installed.

View 4 Replies


ADVERTISEMENT

Click Start And Sleep Computer / Monitor Will Go To Sleep But Computer Is Still Running

May 20, 2012

Sometimes when I click start and sleep on my computer (windows 7) the monitor will go to sleep but the computer is still running. I cannot wake my monitor up so there is nothing I can do to wake it up besides manually turning it off using the button on the computer case.

View 1 Replies View Related

MCE / Monitor Goes To Sleep

Dec 24, 2009

I am using Win 7 Ultimate 64 and have a HP ASUSTeK Tiger LNA Hybrid TV Tuner. Everything works fine until mce has been running for about 20 min and the monitor goes into standby and the computer is still on.. I can´t wake up the computer throw my remote either so i have turn it off and this happens everytime..

I don´t know if this has something do with it. The monitor is a 30 inch lcdmonitor from HP LP3065 and is connected to both of the 2 existing dvi-inputs on my nvidiacard

I am using the drives for monitor, videocard , tvcard that been installed when windows 7 Ultimate 64 was installed.

View 3 Replies View Related

Monitor Going To Sleep Regardless Of Settings?

Aug 5, 2011

My monitor goes to sleep after about 10 minutes when I am watching a movie or something. Its really annoying because I have changed the screensaver and monitor power settings (in display settings) to never, I have changed the power settings (in Control Panel -> Power Settings -> Edit Settings -> Advanced) and put everything at never. Still the problem persists.

View 4 Replies View Related

All Of A Sudden Monitor Goes To Sleep?

Nov 14, 2011

i have power settings to never sleep, if i move the mouse it comes back on. display to stay on where else can i look? in 7 pro.

ok im an idiot seems i installed a windows theme it turned on screensaver

View 1 Replies View Related

PC Won't Wake Monitor After Sleep?

Jan 27, 2012

I know there has to be a simple fix to this but I'm banging my head against the wall right now trying to figure this out. Everytime my PC goes to sleep I'll press a button on my keyboard or move my mouse and it will wake up just fine, but the monitor won't wake up. I've also noticed that the backlight on my keyboard doesn't show up. I've tried different monitors and removed the VGA cable from the graphics card after waking up and plugged it back in and no video. I have to reboot the computer to get video again and everything works great.. until it goes into sleep mode again. I have updated my graphics card driver (Geforce GT 210) and still no fix. I haven't made any changes that would cause this. Someone has to know something about this

View 5 Replies View Related

Sleep Monitor But Not Projector

Oct 24, 2009

I would like to find out if there is a setting that will allow me to sleep my dekstop monitor but not my projector? I am running the projector as an extended display. I do not want to connect just to projector and have my desktop displayed via the projector.

View 0 Replies View Related

Monitor Goes To Sleep When Hibernate Set To NEVER

Nov 18, 2009

2 hour hibernation for both CPU and monitor worked perfectly for about two weeks, waking up with a touch to the spacebar. Then a few days ago the monitor would not wake up but the computer did. Now if I turn off the AC .

power to both units and then re-boot the monitor will turn on but will go back to sleep in about 15 minutes with the blue light blinking. The computer will complete a DL or backup with monitor sleeping so it appears OK.

Checks so far:

1. Updated drivers for both monitor and video card with latest available. Also updated chipset and BIOS (504).

2. Swapped monitors between computers and the problem went to the second monitor. Main monitor worked all day on second computer.

3. Spoke to ASUS tech support and was told that the monitor is controlled by the OS. Suggested I enable ACPI 2.0 support (default disabled) and disable ACPI APIC Support (default enabled) in BIOS. Won't boot to OS when ACPI APIC Support disabled.

4. Found a few similar cases on the Internet but no solutions.

5. Even tried turning off hibernation and setting monitor timeouts in the Powercfg using CMD prompt.

6. Re-installed OS, big mistake as it took several hours to get re-registered.

View 1 Replies View Related

Monitor Stuck In Sleep Mode?

Jul 7, 2012

im having problems with my monitor, it doesnt want to get out of sleep mode. Right now I have the comp apart which is no problem for me to put it back together. Im assuming its either the battery not giving enough power or the connection where you plug the monitor into is bad.

View 14 Replies View Related

Monitor Cannot Wake Up From Sleep Mode

Jun 17, 2012

I have a Dell Studio XPS435 MT running Windows 7. For the past six months I noticed that when waking the computer from sleep mode, occasionally the monitor would not wake up and I would have to reboot. It got worse and worse until now it will never wake up without rebooting. I also noticed when I reboot, if I don't wait a few seconds for the computer noises to stop and immediately press the power button; the computer starts beeping loudly and nothing works. I have to manually shut it down and wait about 30-40 seconds to reboot.

View 1 Replies View Related

Monitor Will Not Sleep While Computer Is Locked

Sep 26, 2012

I've recently ran into this problem on my computer. My monitor will not sleep while the computer is locked. If I just let it sit, the screen saver will appear, then the monitor will sleep. However, once the computer is locked, the monitor will not sleep.The monitor auto sleeping was working perfectly fine last week.I have triple checked the Power Options, ensuring the monitor sleeps in 10 minutes (screen saver activates at 5 minutes). I've also looked at the Advanced Power Options setting, and that is set at 10 minutes as well. I have reset to defaults and the problem still persists. I have also tried to set a GPO to see if that would work, nothing either.how the monitor will sleep when the computer isn't locked.I know I could just sleep my computer (I don't want to) or turn my monitor off (this gets annoying after a while).

Edit: What I've done/tried:

Triple checked monitor settings/power options
Reset to defaults, then set the monitor to sleep at 10 minutes
Changed to a new theme
Enabled monitor sleep GPO
Restarted multiple times
Disabled screen saver
My monitor has no sleep settings (settings, not function; it has the sleep function)

View 9 Replies View Related

Monitor Not Wake From Sleep Mode

Nov 13, 2009

sometimes not all the time after my pc has been in sleep mode, the monitors dont come back on, i can see the pc wakes up but the monitors stay black and so far the only way ive got it to work is to power off and reboot.

all my drivers are upto date what could be causing this i dont realy want to disable the sleep mode?

View 9 Replies View Related

Monitor Goes To Sleep Mode Instantly

Oct 2, 2011

reset video card to factory setting, reboot if it still goes to sleep,remove added on video card hook monitore up to onboard vid card

View 4 Replies View Related

Monitor Won't Wake Up From Sleep Mode?

Dec 3, 2012

My computer monitor won't wake up from sleep mode. The power light flashed blue like it is asleep but when I hit the keyboard or click the mouse nothing happens. I even restarted the computer and tested to see if the wires were bed or loose and that didn't help either. I switched out the monitor and the new one works on the computer so it seems it is something with the monitor.

View 2 Replies View Related

Monitor Is Black After Sleep Mode But Not Hibernation?

Sep 14, 2011

The thread title about sums it up! When I try to wake my computer from sleep mode, my monitor gets no signal/is black. The "rest" of the computer seems to wake up just fine.

The monitor was working fine with Windows Server 2008, after sleep mode, but I just recently upgraded to windows 7.

I have already tried: displayswitch /extend displayswitch /internal in a .bat file

using "Hibernate Trigger", "Power Triggers" and Windows task sheduler.

Doesn't work at all for me (I've got Windows 7 Proffesional 32-bit Service Pack 1)

View 9 Replies View Related

Monitor Doesn't Come Back From Sleep State

Apr 17, 2009

I went to sleep last night with the computer on (Windows 7 7077) like always and this morning it's still on but none of the usb devices are working, monitor doesn't come back from sleep state but the fans on all the components are still spinning. I tried hard rebooting 3-4 times and still nothing. I let it sit and cool off for a bit and still nothing. Anyone know what the problem could be?

I was thinking it was the motherboard but then wouldn't the ethernet light be off if the board wasn't working? The only thing on the computer the has been overclocked is the CPU which I took from 3.0ghz to 3.8ghz and it's been running fine on the stock cooler for the past 6 months almost and then bam it's like this. I don't think it could of been over heating as the temps usually run 30C at idle and 50-60C at full load and the side is off of it.

View 9 Replies View Related

Monitor Won't Turn Back On After Sleep Mode?

Apr 17, 2011

so the Windows 7 Ultimate 64bit install is fresh, and all the drivers are the latest available. I have updated my mobo's bios to the latest version through Asus' "AI Suite II" which makes things very simple. I want my PC to be able to go into sleep mode but I don't want to have to force shutdown every time it goes into sleep mode after a time span. For some reason if I wake my PC after its been in sleep mode for a short period everything turns back on just fine... I know there might be a solution through the configuration panel

View 5 Replies View Related

Monitor Incorrectly Detected After Sleep Mode

Dec 29, 2011

New Build Asus M5A88-M EVO
Phenom II x6 1055T 2.8Ghz
Samsung 840 series 64Bb SSD
Radeon HD5570
Win7 Professional 64 Bit

Annoying intemittent fault whereby the monitor is incorrectly detected as a generic model instead of an LG L192WS and the screen resolution changes to a lower setting which loses a large percentage of the desktop. I've updated to the latest AMD drivers as that seemed to work for others with a similar problem but to no avail. it takes 5 mouse clicks to open desktop and reset the display to the correct one, but after spending quite a bit to speed up my system I begrudge the time!

View 9 Replies View Related

Monitor,Keyboard And Mouse Not Waking From Sleep?

Feb 8, 2013

Over the past week, my monitor,keyboard, and mouse become unresponsive after waking from sleep. I haven't installed any new software in the past couple weeks and all my drivers are current. It doesn't happen every time, its random. About 3-4 times in the past week I come home and hit the keyboard to wake it up, the computer wakes up, but the monitor, keyboard, and mouse never come on. I've tried unplugging both the keyboard and mouse and it still won't work. I have to hard reset the comp for them to come back on. Unfortunately, since its random, I can't duplicate it, I just have to try some things out and wait to see if it happens anymore.

View 1 Replies View Related

Monitor Goes To Sleep After Completion Process During Windows 7 Install?

Jan 12, 2013

I just built my first computer build today, & I must say that everything has seemed to go quite smooth. The problem that came up though, is after installing Windows 7 home premium 64bit OEM to my HDD (it went through the whole copying files,expanding files, ect.). Upon restarting itself, it goes to the Windows startup screen & the logo appears normally for a few seconds & then the monitor goes black/goes to sleepEverything inside the computer is still running at this point I should addThere's no debug code on my motherboard so I'm assuming everything is fine inside.I'm using a HP w2207 monitor with a DVI connection to a ASUS HD4870 GPU.

View 2 Replies View Related

Wont Sleep Manually Forced (turns Off Monitor Only) But Sleeps Auto?

Jul 20, 2012

When I choose "SLEEP" it only turns off the monitor , normally when the PC sleeps you can hear everything turn off and the power button glows... it does this if i leave it for 25 minutes (as thats how long its set too wait before sleeping) - but when I manually force sleep it seems to simply turn off the monitor? you can hear alll fans and hard-drive still going, when i wake it its at the login screen

View 2 Replies View Related

Stopping W7's RAM Cache

Nov 8, 2009

I'm doing some audio work, editing drums, which involves taking a few audio files (7 or 8) and splitting them into hundreds, one for each drum beat.

My problem is that when I do this, my computer completely locks up. I've noticed that as soon as I do this, Windows 7's RAM Cache jumps up to 1.7gb. And I've only got 2gb of RAM, so it leaves only 300mb for my audio program to run, and I think this is the problem.

Is there a way to temporarily or permanently disable Windows 7's ability to cache your RAM? Because it doesn't seem to be disabling when I want it to.

I'm running the Windows 7 RC Build 7100 atm, with an Intel Core2Duo (2ghz) and 2GB of ram.

View 3 Replies View Related

Printer Spooler Keeps Stopping?

Mar 26, 2012

I was having trouble with the printer spooler stopping, finally got it fixed after 4 stressful days, went to Administrative tools, print management and deleted the print jobs that were waiting to be printed and it worked. you may have to go to services and restart your printer spooler first before it will recognize your printer.

View 1 Replies View Related

CD/DVD Driver Stopping My Whole Process

May 29, 2009

I am trying to install Windows 7 RC into to different machines. Both are self built machines. Both are running Win XP w/ sp2.

On one machine I have tried everything to get past a CD/DVD Driver request. The first DVD driver is a NEC ND-2500A. I found what I thought were the drivers, but whenever I get to the point of selecting the drive (with the drivers in it) they don't appear within the DVD drive.

I even went as far as to load the driver onto the HDD I am installing Win& to. After may attempts, with no luck, I installed a plug and play CD/DVD player. Now, I have never had driver's for this unit, but it still wants drivers for it.

What am I missing here? Why won't it get past this point. I have even gone as far as disconnecting C drive and tried loading directly to D drive (second HDD drive).

On the second computer it mentions something about an I/O shield problem and wont even let me get into the setup stage.

View 8 Replies View Related

Print Spooler Keeps Stopping?

Apr 1, 2010

I have a laptop running Win 7 32-bit. I configured a network printer, which is an HP Deskjet 720 that is connected to an XP machine and shared. That worked fine. But I just purchased a new 64-bit desktop, and I can't print to that network printer. I can install the printer, and the status shows it's available/ready. But when I try to print a test page, nothing happens. When I check the document status, I get a message saying that the print spooler needs to be started. I've restarted it several times, but it still doesn't work. I've searched the forum and Googled this problem. Lots of users seem to have this same issue. I've tried all suggestions, but nothing works. The spooler is set to automatically start, and the restart time after error is zero. I decided that I'd try replacing the printer driver. But when I go into Control Panel and look at printer properties, the Advanced tab where I should be able to update the drive is all grayed out. So I'm stuck.

View 9 Replies View Related

Stopping Defragmentation On SSD Drive

Dec 21, 2009

I'm running Win 7 Ultimate x64 on a desktop with the OS loaded on an Intel 160GB G2 SSD as C:. I've noticed that Defrag is happening on the SSD drive. I've confirmed this in two ways: First, looking at the Last Run date in the Disk Defragmenter UI. The date associated with the SSD drive C: continues to move forward. Second, I've looked in the event log and have confirmed that there are messages stating the successful defragmentation on the C: drive.

I have 3 drives in my system. The SSD drive is C:. I have 2 WD 750GB drives as D: and E:. If I look at the Defragmentation Schedule UI, only drive D: and E: appear. Just to be safe I turned off Scheduled Defragmentation and Defragmentation has stopped on D: and E: but continues on C:.

Looking at the event log, there seems to be no discernable pattern as to when the defrag happens on the SSD:

I can't find any place to stop Defragmentation from happening on C:. Any suggestions?

View 9 Replies View Related

Can't Access Email Without It Stopping?

Jan 15, 2012

Verizon will not let me log in. When I type in user name and password, it comes up that I have used a wrong procedure. I'm typing the correct items in their boxes.

View 1 Replies View Related

Windows Stopping And Restarting?

Aug 20, 2012

Am using Hp Probook 4720s with window 7 32bit OS. A couple of days ago i shut the cover of my laptop while updates are being installed and since i cant get to start the window. it keep stopping and starting in circles. I have done system recovery several times and sometimes it gives an access denied to message "c:windowssystem32configsystemprofileDesktop is not accessible" messgaes. i can not access my files to do any work.

View 2 Replies View Related

Stopping Print Size From Changing?

Dec 31, 2011

how to stop the print size from changing when I click on a link within a web page? At the moment I have a 150% print size but that changes to a very small 100% when I open a new link. This happens nearly every time I click on a link or open a new webpage. How can I prevent this from happening at all?

View 5 Replies View Related

Windows Stopping At Random Points

Feb 11, 2012

the comp stops at random points it happens in all os's xp, vista and 7 i have tryed everything i can think off the on;y stange thing is that when in safe mode it works perfectly fine but as soon go onto the normal mode it hangs for 2 to 20 mins at a time. there is no mouse or keyborad movement and no movement on the screen at all. no networked devices or drives. brand new instalation on the os's, full delete, partition and format.

View 9 Replies View Related

Windows 7 System Time Keeps Stopping?

Oct 4, 2012

I am having an issue with my system time. After reboot it reverts back a few hours. During the day it will also stop and freeze on a curtain time. If I install a third party time sync program it works ok. I have checked the Internet time server and it is turned on. I also set the net time server to automatic instead of manual.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved