how to stop the print size from changing when I click on a link within a web page? At the moment I have a 150% print size but that changes to a very small 100% when I open a new link. This happens nearly every time I click on a link or open a new webpage. How can I prevent this from happening at all?
View 5 RepliesI have a laptop running Win 7 32-bit. I configured a network printer, which is an HP Deskjet 720 that is connected to an XP machine and shared. That worked fine. But I just purchased a new 64-bit desktop, and I can't print to that network printer. I can install the printer, and the status shows it's available/ready. But when I try to print a test page, nothing happens. When I check the document status, I get a message saying that the print spooler needs to be started. I've restarted it several times, but it still doesn't work. I've searched the forum and Googled this problem. Lots of users seem to have this same issue. I've tried all suggestions, but nothing works. The spooler is set to automatically start, and the restart time after error is zero. I decided that I'd try replacing the printer driver. But when I go into Control Panel and look at printer properties, the Advanced tab where I should be able to update the drive is all grayed out. So I'm stuck.
View 9 Replies View RelatedI am a big fan of user account controls in Vista and Windows 7.
I would like to know how I can stop any and all newly installed programs from being able to change or affect my default programs.
I build and maintain computers and once I have installed and set up a new system I don't want any program to change my default programs. Not even win media player or Internet explorer if they update themselves.
Does that make sense.
I use GOM as the default media player and firefox as the default browser. But sometimes if there is a system update for media player, internet explorer or even iTunes and quicktime these programs sometimes after the update change my default programs.
Once I have finalized my install and set up my preferences how can I lock down the default programs permanently?
This all started whenever I wanted to change my text size different by changing my DPI settings. What I did was right click, go to screen resolution, and clicked on "Make text and other items larger or smaller". From this I changed it to 100% from 125%. I noticed it had changed my font size to the 100%. It then made everything SUPER small when I changed my theme settings.Whenever I right click and go into personalization settings, I do the usual customizing to my likings. Since I want to save the theme, I do so by naming it, blah. Now I want to use the blah theme by click on it, and I do so. Everything is fine and dandy until I right click my desktop to refresh(out of habit). This is the before and after of the font sizes.
Before
After
My workaround was to set a custom DPI setting, log off like it prompts me to, then changing it back to 100%, again prompting to do so. It is so annoying to do so.
Windows 7 64-bit I can adjust the display so it's large enough to read everything but the text. For instance, now have it set at 150% of normal and the title of this post is large but what I'm typing now is so small it's barely readable. MUCH smaller than 10-point.There is a way to customize the display, but anything more than 150% is so large it overflows my wide-screen monitor. Surely there must be a choice between way too large and way too small, but I can't find it.A message on my screen now says to run TSG Sysinfo Last time I downloaded something similar, here, I ended up with a $40 Uniblue program on my computer that I had to fight like crazy to stop invading my world. I never got my money back, either.
View 1 Replies View RelatedI was just wondering if it is at all possible to alter the height of the taskbar in Windows 7? On Windows Vista I had made my taskbar thinner to be about the same size as the taskbar in Windows 98 etc.I cannot remember how I did it, but I was just wondering if it is possible to do the same in windows 7?
View 4 Replies View RelatedI bought a new Gateway laptop. Installed Windows 7 home premium 32-bit that came with it. Once in a while, after I close the lid, my desktop icons will change size, sometimes smaller, sometimes bigger. It's really annoying because when it's really big, the icons move around. I'll have to change them back to the size I want and move them back to the place they were. I've updated everything i.e. windows update, hardware drivers etc. I've disabled desktop gadgets but it still does it.
View 4 Replies View RelatedI really loved XP's smaller taskbar, I don't mind windows 7's big bulky icons, but i absolutely hate the windows 7 smaller icons on the taskbar option.
They are just TOO SMALL to see, and they make the image look like 16x16 images, is there anyway to make them SLIGHTLY bigger? Maybe a regedit hack of sorts?
I Need To change my windows 7 ultimate 64-bit to 32-bit Widnows 7.Will it be easy to change my OS.My configuration is 3GB ram with Pentium(R) Dual-Core Cpu T400 @ 2.14 GHz
View 9 Replies View RelatedHow do I change the size of the font for my viewing and composing emails? I cannot tools/preferences to change these settings.
View 4 Replies View RelatedWhen I'm using Window Explorer, for me is hard to see the icons of the drives on my computer at the left pane (at the left side) under the Organize and New Library option is. Does anyone know how to make this icons large size? is it too hard? I don't want use the registry because I don't want to get in troubles.
View 6 Replies View RelatedLaptop running Win 7 Pro'm a bit unsure of how the hard drive is divided, and what each partition is doing. When Win Explorer open, it shows C drive (67Gb) and D drive (66.9Gb). However, on expanding the drives, ie in the left hand panes, D drive says 'empty'Having now downloaded Easus Partition Manager, it shows what apparently looks like 4 partitions, and I assume one of them is the Recovery (15Gb, of which 7Gb is used). When adding up the Gb showing in EPM it suggests a 250Gb drive but I have seemingly only got 66Gb accessible.I'd like to re-organise the drive/partitions, so that I have increased storage for general use, and the Recovery partition.
View 10 Replies View Relatedi am currently using windows 7 home premium 32 bit and having problem with changing size of user account picture.
what it is is when i change the 128 x 128 picture's size to 64 x 64 and set it as user account picture and see the log on screen, it doesn't actually shrink. instead what i am getting is a blurry version still with the size of 128 x 128.
I recently purchased a new laptop which came complete with Windows 7 o/s. One real problem for me is that the print size on incoming emails and all web sites is smaller than on my old XP o/s. explain in simple abc terms, if possible (I am a silver surfer!), how I can permantely enlarge the print. On XP there was an item to click termed 'increase zoom level' (I can't find something similar on Win 7) but I don't want to be having to do that all the time.
View 1 Replies View RelatedCan the image that prints on the printer test page be changed, and if so, how?I'm on windows 7 64 bit?
View 2 Replies View RelatedUsing Windows 7, every time I boot up the icon size and font is different size either , large or small. I want large, but how do I change to lar.ge and keep it that way (make it default). Windows 7 now gives me what It wants. No pattern
View 2 Replies View RelatedI have a videoediting software that I am runing on 32 bit Windows 7 with 4 Gb RAM, the company that makes the software suggests to set the Virtual Memory/PageFile Size to double the RAM amount.I looked and mine is set to auto, I have many drives and all say none and are grayed out under paging file size for each drive. Which drive should I double the paging file ? the drive the software is installed on ? what about all my other drives, once I take it off auto they will not be managed. Should I set them all to double the RAM and if so how will it affect my system?
View 5 Replies View RelatedFor months now I've been fighting that my hardware cursor disappears in World of Warcraft on my home theater system and time I switch modes to full screen and sometimes even in windowed mode and the reason for this is apparently due to me setting my display text size to 150% or 125%. I did find via some searching WoW customer service forums that if I set it back to 100% (default) OR 149% customized, my hardware cursor works again. I'm going to leave it at 149% because I really do need the larger text size on my HDTV and using 149%, I don't have to change back to normal, log out, log in, then start my game.
View 2 Replies View RelatedHow do I change the font style & size in windows live mail,Permanently ? I'm using win 7 & had to format the drive,which lost my settings.
View 3 Replies View RelatedWhen I log on to MS Word, it defaults to "Print Layout" view. I'd like to change to "Draft" view. I checked but couldn't find it. How to change it?
View 1 Replies View RelatedCan we change taskbar icons' size to a specific size other than two default windows defined sizes?
View 5 Replies View RelatedWhen I marked a whole folder or a couple of files in Windows Explorer in Windows XP then the sum/total size of all marked files is (was) shown in the status bar in the bottom of the WinExp window.
View 3 Replies View RelatedI've been using various print drivers for various locations with success for a month with my new laptop. Today, all drivers gone.Loading new ones doesn't work. Print spooler is not "started;" it starts successfully, then is not "started" next time I look.Other possibly relevant information: HP 1020, HP MX 340 at home office.Tried: multiple restarts of print spooler, multiple reboots, troubleshooters, HP detect and download drivers?
View 5 Replies View RelatedI'm doing some audio work, editing drums, which involves taking a few audio files (7 or 8) and splitting them into hundreds, one for each drum beat.
My problem is that when I do this, my computer completely locks up. I've noticed that as soon as I do this, Windows 7's RAM Cache jumps up to 1.7gb. And I've only got 2gb of RAM, so it leaves only 300mb for my audio program to run, and I think this is the problem.
Is there a way to temporarily or permanently disable Windows 7's ability to cache your RAM? Because it doesn't seem to be disabling when I want it to.
I'm running the Windows 7 RC Build 7100 atm, with an Intel Core2Duo (2ghz) and 2GB of ram.
I am running out of space on my system drive (120GB SSD with < 6GB remaining). It happened in only 12 months. I'd like to know where all that space went, which files are using it. So I'm looking for a way to rank files by size regardless of their folder location, largest-to-smallest, ideally without a full scan of the disk if there are internal indexes that have this info.
View 2 Replies View RelatedI am in the process of formating a second 300 GB disk drive in windows 7 64 and don't know what file allocation size to use.
View 13 Replies View Related(Windows 7 Home Premium 64-bit, HP LaserJet CP1215)When printing from Word (or any other normal application) the documents just sit in the print queue with Status = "Error - Printing".If I stop, then re-start the Print Spooler service, they then print.Strangely enough, this does not happen if I print from the HP printer diagnostic utility.I've done complete re-install of the entire printer driver suite and I'm pretty sure everything that end is OK. So what's happening with the spooler? The error message isn't exactly very revealing
View 9 Replies View RelatedMy HP 6500 all in one will print test pages but will not print from my computer. It worked fine up until a week ago?
View 2 Replies View RelatedI was having trouble with the printer spooler stopping, finally got it fixed after 4 stressful days, went to Administrative tools, print management and deleted the print jobs that were waiting to be printed and it worked. you may have to go to services and restart your printer spooler first before it will recognize your printer.
View 1 Replies View RelatedI am trying to install Windows 7 RC into to different machines. Both are self built machines. Both are running Win XP w/ sp2.
On one machine I have tried everything to get past a CD/DVD Driver request. The first DVD driver is a NEC ND-2500A. I found what I thought were the drivers, but whenever I get to the point of selecting the drive (with the drivers in it) they don't appear within the DVD drive.
I even went as far as to load the driver onto the HDD I am installing Win& to. After may attempts, with no luck, I installed a plug and play CD/DVD player. Now, I have never had driver's for this unit, but it still wants drivers for it.
What am I missing here? Why won't it get past this point. I have even gone as far as disconnecting C drive and tried loading directly to D drive (second HDD drive).
On the second computer it mentions something about an I/O shield problem and wont even let me get into the setup stage.
I'm running Win 7 Ultimate x64 on a desktop with the OS loaded on an Intel 160GB G2 SSD as C:. I've noticed that Defrag is happening on the SSD drive. I've confirmed this in two ways: First, looking at the Last Run date in the Disk Defragmenter UI. The date associated with the SSD drive C: continues to move forward. Second, I've looked in the event log and have confirmed that there are messages stating the successful defragmentation on the C: drive.
I have 3 drives in my system. The SSD drive is C:. I have 2 WD 750GB drives as D: and E:. If I look at the Defragmentation Schedule UI, only drive D: and E: appear. Just to be safe I turned off Scheduled Defragmentation and Defragmentation has stopped on D: and E: but continues on C:.
Looking at the event log, there seems to be no discernable pattern as to when the defrag happens on the SSD:
I can't find any place to stop Defragmentation from happening on C:. Any suggestions?