When i try to connect my wireless mouse to my laptop it dosnt respond at all. It says it is connected, however nothing works. Ive tried using a Flashdrive and it works fine. Ive also tried with 3 different mice with the same result. Im guessing it has to do with a driver i have recently downloaded from windows update, however, i have restored my computer as far back as i can go, and it still dosnt work.
View 2 RepliesI was away on a trip, so I let my parents use my laptop while I was gone. They say it updated, something, but afterwards froze, so they turned it off. Turns out it was several different updates, including a BIOS update. Everything else works fine except for my usb ports which no longer detect anything connected to them. The device manager gives me little yellow warning bubbles by Standard Enhanced PCI to USB Host Controller and Standard OpenHCD USB Host Controller. It says code 19 error and the config info in the registry is missing or damaged. I have tried updating the drivers, uninstalling and letting it re-install, but it hasn't worked. I'm running on a HP Pavilion dv6-3013cl Entertainment notebook, Windows 7 (64bit).
View 14 Replies View RelatedI've spent days researching this problem and have found no solutions. I plug the Microsoft wireless mobile mouse 3500 transceiver into my USB 2.0 port and the cursor movements are so erratic that the mouse is useless. I try to use a Microsoft wired mouse connected to the USB 2.0 port and it does not work at all. However, both the wireless mobile mouse and wired mouse work perfectly when plugged into one of the two USB 3.0 ports.
This problem occurs on my Dell XPS 17 L702X laptop, which is less than three weeks old. The laptop is running Win 7 Ultimate x64. I have installed the latest drivers from Microsoft's website. I have uninstalled them and reinstalled them but the problem remains. I have exchanged the Microsoft wireless mobile mouse 3500 for a new one but the identical problem remains.
I do not have this problem on my Dell Studio XPS 7100, which is also running Win 7 Ultimate x64. The same mice that fail to work properly on the laptop's USB 2.0 port work perfectly with the USB 2.0 ports on the desktop. Everything in Device Manager (laptop) is up to snuff and no problems are indicated.
i have 2 windows 7 computers that dont recignize that i plugged in a mouse. i know the usb port works because i use thumbdrives and other usb devices and it recignizes them onecomputer is an alianware m11x laptop the other is a custom biult desktop computer i know the mice works because they work in my husbands laptop but neither of my computers plzzzzzz ive tried like 5 differnt mice and none work
View 4 Replies View RelatedI've been hosting servers on various videogames over the year to play with my friends online, recently I tried a game which worked about a month or so ago (mount and blade: warband, I also tried a few others afterwards) but nobody could connect, I checked everything and it should have been working fine but then I looked at various port checking websites and for some reason none of the ports are open anymore.
I've tried changing the port settings, resetting the router and disabling my firewall and none of them seem to work.
A few days ago I installed a USB 3.0 card (to be precise, this one: 2-Port USB 3.0 SuperSpeed PCI-E Controller Card - Free Shipping - DealExtreme). It uses the very common NEC PD720200 USB 3.0 controller. I installed the required drivers for Windows 7, and the card worked fine for the first day or so. but not since. Whenever I plug in a USB 3.0 external hard drive, I get a false "This device can perform faster..." message, as if I had plugged the drive in a USB 2.0 port.
The external drive I am using is a Western Digital MyBook Essential 1130. It is definitely a USB 3.0 drive, and came with the required USB 3.0 cable. While the USB 3.0 card was working, I got full-speed transfers to the limit of the hard drive's ability, about 90-100 MB/s. Now I can only get USB 2.0 speeds (33-34 MB/s). Windows insists I have the drive plugged into a USB 2.0 port even though it is plugged directly into the USB 3.0 card.
Things I tried so far: -rebooting and complete power cycle. No difference. -plugging the drive into one port or the other. Also no difference. -Looked in Device manager.The controller is recognized as a USB 3.0 device is using the proper NEC drivers.
Other info that may be important:
-No overclocking settings in use.
-I made sure the cable was plugged in all the way. It's in as far as it can go, but the ports will still only act like USB 2.0 ports.
I might as well throw the card away if it is only going to act as a USB 2.0 device.
dell xps gen 4 running windows 7 (32 Bit)after downloading the latest windows updates, front and back USB ports no longer recognize the USB devices that were plugged in before. The usb device drivers no longer automatically load. usb ports recognize unknown device but device does not function (USB wireless Keyboard/ mouse or external hard drive) I deleted last few updates, re-booted computer and still get same result.
View 5 Replies View RelatedSo I installed some weird file and it like disabled ALL of my USB ports, hwo can I get them to work again?! Both my keyboard and mouse are USB and I don't have any regular ones, any way I can fix this through my 2nd partition using WinXP? im using the Win XP partition to ask this right now, my Win7 partition seems to run fine like when it happened I thought it froze but it didn't because the wifi signal went off from my USB wireless adapter and my mouse+keyboard adapter both light off as well as my DVC 80 capture device. The file I ran was 'libusb-win32-filter-bin-0.1.12.2.exe' from a package I downloaded in a zip called 'iHackintosh iRecovery Package for Windows & Mac' and I REALLY DONT want to restart my computer
View 1 Replies View RelatedInstalled Windows 7--->USB ports do not work.
1. Tried uninstalling/reinstalling them...no good
2. Tried downloading from Intels website--->Got error message saying my computer does not meet minimum specs for program to run, which is BS because my computer is very good and is only 1 year old.
I'm not sure if any other specs needed to solve this problem.
I upgraded from vista 32bit to windows seven 32bit a few days ago, ever sense i have upgraded i have never been able to use any usb ports. i have went into the device manager and uninstalled and reinstalled the usb port drivers, they will start to work for about 30 seconds then will fail.
This is the error in the properties under usb port:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
I have installed my motherboards new drivers and bios for windows 7. also have updated windows and installed all major updates. I have been working on fixing this error for days now and i have had no success.
USB 2.0 ports don't work after upgrade from xp to win 7.
View 7 Replies View RelatedI have been having trouble with my usb ports not reading my flash drives. I just did a little test and was shocked to find that my usb ports will run printer and not flash drives? I tried to update the drivers but it says they are up to date. What can cause this? It is 5usb ports 2 in back and three across the front. My system is a Dell Studio XPS Desktop 435T/9000 64 bit windows 7.
View 3 Replies View RelatedI Seem to be having trouble forwarding my ports, My router model is a D-Link DIR-615. (If needed by PC Specs are down below) When I go into my router and i forward the ports, the forwarding doesn't work, Here is what I know:
- Computer IP Is the correct IP that the port is being forwarded too
- Windows Firewall is Off
- Restarting the Router/Computer Multiple Times
- The router says the ports are forwarded
- I have forwarded the ports to a laptop of mine and that seemed to work
- I tested the ports on this site Open Port Check Tool - Test Port Forwarding on Your Router
- That site told me that the forwarding to my laptop worked, but not to my desktop
I was rebuilding my computer bit by bit after my old one died on me. I recently purchased a motherboard/cpu and I used an old harddrive with windows xp on it and my old video card from my previous pc.Everything worked fine, all usb ports were up and running, monitor worked great. Than I went to install Windows 7 on my computer from a usb thumb-drive. Everything went smoothly until I got the the first restart. When the computer turned on again, all fans were turning, hard drive was spinning, and led lights turned on but my monitor went black saying no connection, and none of my usb ports work (no lights on my keyboard or mouse).
My computer specs are:
Motherboard: AsRock 970 Extreme3
CPU: AMD-FX 4100
Graphic Card: Zotac GeForce 9500GT
Ram: 2, 4GB (8GB total) Corsair Vengeance DDR3
HDD: Seagate Barracuda 7200.7
Monitor: Asus VH198T
My problem began when someday i had issue in my windows which was usb was not recognized as i tried putting 3 usbs but all of them didn't work and i have 2 usb ports in my laptop which is dell xps 15z so i don't think it is a hardware issue
My problem continued and i searched and searched the internet for solutions but no one really worked so i decided to format the windows and installing new clean windows 7 one, and i did so and after installation i had too many more problems knowing that i installed all the required drivers needed for the laptop and checked them with driver genius, now any usb i plug in isn't even sensed by the lap or self installed like the usb ports have no drivers or anything.I tried the wireless mouse which isn't sensed on another laptop and it installed and worked instantly, so where is driver software installation which should install the mouse automatic?
It seems all the usb ports do not work on my laptop. My usb mouse doesn't work, and my other usb devices do not work either. All the usb drivers are installed properly as detected.
View 2 Replies View Relatedrecently my computer was acting up and would not startup past the "windows is starting up" screen. I really wanted to play a bunch of games I just bought so I kept occasionally getting it to work in "last known good configuration". Safe mode didn't work and eventually I ran a disc I have no idea what it's called but it said soldierx on the screen and ran like 8 virus scans and did a bunch of tests on my comp, apparently geeksquad uses it. Anyways it removed 3120 spyware, but right before I decided to run this the only reason I decided to was because my keyboard and mouse stopped working. It works in the bios and anything before I actually get to my desktop, lights up and everything, even the keyboard shortcuts work such as windows search, but I can't move my mouse or do anything with my keyboard. I ran startup repair and it says that windows can't automatically fix the problem, had my dad do some pin reset thing where you do something with the battery and move pin 1 to 2 and 2 to three or something like that and didn't work, the bios has ps/2 enabled and legacy something enabled which I read could be the problem, and I have no restore points.
View 4 Replies View RelatedI built this Windows 7 machine last year on an msi p55-gd80 motherboard with an i5-750 cpu. It would sleep fine and come out of sleep fine. Then I upgraded to a gigabyte Z68MA-D2H-B3 motherboard with an i7-2600k cpu. In doing the upgrade, all I did was boot the new hardware using the old hard drive, and then ran the new motherboard install dvd. Everything worked from the get go just as it had on the old machine, with one exception. Now, when coming out of sleep, I usually get a bsod. I assume this is driver related, but am not sure how to proceed as device manager looks fine and apart from coming out of sleep, the machine is perfect.
View 9 Replies View RelatedI've found several entries on this topic but nothing that gives a clear cut "per application" solution. I have a single application (form) that when opened from a Windows Service needs to disable most hot key scenarios. We are collecting safety information and they must reply to the form.
I found some awesome code that works like a champ to hook (atl+tab, etc...) in the XP world. However, as we start to migrate to Windows 7...most of those low-level hooks still work with the exception of Alt+Tab. Because of Aero the alt+tab must be being grabbed by IE first?
I can't use a registry solution as this would be global. The hook needs to only be in place while the form is active and then the hook should go away....as I do now when running on XP..
Adding the pc to our domain seems to have caused the ctrl-alt-del key combination at login to no longer work. Other Windows 7 pc's on the domain work fine with the ctrl-alt-del key combo. It's not the keyboard and I can use the onscreen keyboard option to mouse click on the keys to bring up the login screen. Also when the screen saver turns on the ctrl-alt-del also fails to work. I have run several fix tries:
- Boot and F8 into repair computer...found no errors.
- F8 into command screen and ran sfc /scannow and found no integrity violations.
- Ran the win7 boot memory tester and it came back with no errors.
Short of wiping and reinstalling, which I don't have the time to do. I have tested the keyboard on another computer and it works fine.
I bought a pc with Windows 7 that has worked fine with Word (office 2007). However, when I save a file with Excel 2007 and then call it up, the ribbon no longer works (I click on the various commands and ribbons don't pop up). Likewise, I cannot make cell entries or try operations like sorting. However, the program has not frozen since I can click on the various worksheets on the bottom. Is this an Excel or Windows problem and what is the solution.
View 2 Replies View RelatedI have been running Windows 7 Ultimate (64bit) on my computer since December '10 and installed sp1 in February and had noticed no problems. I also have been using Microsoft Office 2007 Ultimate since I first installed the operating system. Now, I cannot use any of my Office Applications. I get an error message stating that "the operating system is not presently configured to run the program". I can't really recall using any of the programs since I installed the service pack. I have run the microsoft genuine software test application and my software checks out fine.
View 1 Replies View RelatedI recently updated my Windows 7 Ultimate with Service Pack 1 through Windows Update and after the reboot my Bluetooth devices don�t work. I have two Dell mice and a Dell keyboard and they no longer function.I deleted the devices and added them back and while they were discovered and did attach they don�t function. Additionally, detailed information on the devices is no longer present.One of my mice was a Dell Travel Mouse and before it showed up as an icon that looked just like my mouse not it shows up as a generic mouse.
In trying to troubleshoot this i disabled the internal Bluetooth and plugged in a Belkin Bluetooth Dongle and it behaves the same way. However as this was an external device it has a flashing light showing when it is receiving a transmission and when I moved the mouse the light would flash so the signal is getting to the computer however nothing is happening on screen. This dongle works perfect on my other Dell D620 Laptop with Windows 7 and no service pack.
Dell D830
Internal Dell 360 Bluetooth
Windows 7 Ultimate
Service Pack 1
4 GB RAM
All Windows Updates applied
since I have two screens connected to my PC anyway, I wonder now whether two people could use one PC at the same time, using two different USB mice.
One person would play Mah-Jong on one screen while the other person would use the internet on the other screen.
I think it's called mutliseat.
is there any way two hook up to mice and keyboards to the same computer with 2 monitors. and if so can someone link a site that shows how to do this.
View 1 Replies View RelatedCouple of months ago I built a new computer from a scratch.My Logitech G400 worked fine for like month and then it suddenly started freezing but not losing power( light still on ) Switching to another USB port fixed it for a while until only Rebooting made it unfreeze again.My first thought was that the mouse is at its breakingpoint which felt weird because it was only 4 months old and worked perfectly with my old PC.I gave it to my brother to test and he is still using it after 2 weeks of no freezing.I took my old Razer Diamondback 3G and used it pretty long time with no problems, until recently it started to unplug/replug itself for 2 sec at increasing interval each day./EDIT: This might be just coincidence as the mouse was old. need to test it on other computer.
Now I'm using Microsoft Basic optical mouse v2.0 Which is working fine.I've tried googling up people with similiar problems but havent found a fix.I have also deleted and reinstalled Drivers for both mice but nothing changes.I have USB headset that works fine in every port.
Quote: Hold on to your seats gaming enthusiasts, Corsair just unleashed an onslaught of Vengeance series peripherals aimed at helping you dominate that Call of Duty marathon... and we got our hands on all of 'em. There's a lot to cover, so we'll get right to it. The K60 gamer keyboard boasts Cherry MX Red interchangeable keys for rapid fire, 20-key rollover, windows key lock and crazy fast reporting rate at 1000 reports per second. Its companion, the M60 mouse, implements an Avago 5670 DPI sensor, adjustable center of gravity, custom lift detection and high-mass scroll wheel. In addition to all that, this bad boy features a dedicated sniper button which allows you to hone in on your target that much faster. Read on for the full rundown on the goods. Read More at : Corsair Vengeance gaming keyboards, mice, and headsets hands-on
View 2 Replies View RelatedAre mice and keyboards plug-and-play for laptops (automatically detected and ready to use)? Or will it require driver installation of any sort? I have a Dell laptop and will be buying a Dell keyboard and mice...
View 4 Replies View Relatedi downloaded a video file and when I checked the folder it was downloaded to it was not there. I then used windows explorer to locate the file and it found it. However, I got this error message "this shortcut refers to has been changed or moved, so this shorcut will no longer work properly."
View 8 Replies View RelatedI recently bought a USB to RS232 adapter (it works fine). My question is: How can find out which com port it is using, except by trying all of them and then finding the one that works. I have a older Thunderbird GPS 10 MHz frequency standard thet requires a RS232 interface to talk to it (for setup purposes). The first thing it askes me is which com port I'm using(1-16).
View 8 Replies View RelatedMy USB ports on this Gigabyte mobo are SUPPOSED to be all USB2.0
So, how come I still get "This device can run faster" messages in
my Windows 7 64 bit home premium installation?? I went to Gigabytes webpage and installed the chipset drivers for Windows 7 on there, but still get the same message when I plug in my Corsair 4GB jumpdrive.